scholarly journals Assessment of chemically and enzymatically modified chitosan with eugenol as a coating for viscose functionalization for potential medical use

2021 ◽  
pp. 004051752110214
Author(s):  
Olivera Sauperl ◽  
Lidija Fras Zemljic ◽  
Julija Volmajer Valh ◽  
Jasna Tompa
Keyword(s):  
Attenuated Total Reflection ◽  
Proton Nuclear Magnetic Resonance ◽  
Functional Coating ◽  
Spectrophotometric Methods ◽  
Work Related ◽  
Modified Chitosan ◽  
Medical Textiles ◽  
Capacity Level ◽  
Ft Ir ◽  
Micro Organisms

The present work deals with the preparation of chemically and enzymatically eugenol-modified chitosan and its application as a green coating on viscose for the potential production of medical textiles. The elemental composition of chemically and enzymatically eugenol-modified chitosan was determined by attenuated total reflection Fourier transform infrared (ATR FT-IR) and proton nuclear magnetic resonance (1H NMR) spectroscopy. Moreover, potentiometric titration was used to estimate the number of accessible amino groups. The chitosan–eugenol formulation possesses a high antioxidant capacity level, as shown by the high content of phenolic compounds analyzed by the following methods: (a) Folin–Ciocalteu; (b) reduction of Fe3+ ions; and (c) α, α-diphenyl-β-picrylhydrazyl (DPPH•). Viscose coated with chitosan–eugenol formulations was evaluated by ATR FT-IR spectroscopy and Acid Orange VII spectrophotometric methods, the results of which demonstrated the successful deposition of these formulations on the fibers. Scanning electron microscopy showed the presence of the functional coating on the viscose. Finally, antimicrobial testing was performed to determine inhibition of selected pathogenic micro-organisms using the ASTM E 2149-01 standard. The antioxidant activity of the functionalized viscose was investigated spectrophotometrically by the DPPH• method. It was found that the coatings of eugenol-modified chitosan impart antimicrobial activity to the viscose against Gram-positive and Gram-negative bacteria as well as fungi, and cause inhibition of free radicals by introducing an antioxidant character. The chemical and enzymatic modification of chitosan offers many opportunities for the incorporation of many natural active ingredients into the chitosan system, which provides a good basis for further work related to the functionalization of chitosan for sanitary and medical use.

scholarly journals Spectroscopy as a useful tool for the identification of changes with time in post-mortem vitreous humor for forensic toxicology purposes

2021 ◽  
Author(s):  
Anna Wójtowicz ◽  
Agata Mitura ◽  
Renata Wietecha-Posłuszny ◽  
Rafał Kurczab ◽  
Marcin Zawadzki
Keyword(s):  
Ir Spectra ◽  
Forensic Toxicology ◽  
Principal Component ◽  
Hierarchical Cluster ◽  
Vitreous Humor ◽  
Attenuated Total Reflection ◽  
Glass Slides ◽  
Added Benefit ◽  
Ft Ir ◽  
Non Destructive

AbstractVitreous humor (VH) is an alternative biological matrix with a great advantage of longer availability for analysis due to the lack of many enzymes. The use of VH in forensic toxicology may have an added benefit, however, this application requires rapid, simple, non-destructive, and relatively portable analytical analysis methods. These requirements may be met by Fourier transform infrared spectroscopy technique (FT-IR) equipped with attenuated total reflection accessory (ATR). FT-IR spectra of vitreous humor samples, deposited on glass slides, were collected and subsequent chemometric data analysis by means of Hierarchical Cluster Analysis and Principal Component Analysis was conducted. Differences between animal and human VH samples and human VH samples stored for diverse periods of time were detected. A kinetic study of changes in the VH composition up to 2 weeks showed the distinction of FT-IR spectra collected on the 1st and 14th day of storage. In addition, data obtained for the most recent human vitreous humor samples—collected 3 and 2 years before the study, presented successful discrimination of all time points studied. The method introduced was unable to detect mephedrone addition to VH in the concentration of 10 µg/cm3. Graphic abstract

scholarly journals Quantification and Classification of Diclofenac Sodium Content in Dispersed Commercially Available Tablets by Attenuated Total Reflection Infrared Spectroscopy and Multivariate Data Analysis

2021 ◽  
Vol 14 (5) ◽  
pp. 440
Author(s):  
Eirini Siozou ◽  
Vasilios Sakkas ◽  
Nikolaos Kourkoumelis
Keyword(s):  
Infrared Spectroscopy ◽  
Low Cost ◽  
Diclofenac Sodium ◽  
Reference Method ◽  
Sodium Content ◽  
Attenuated Total Reflection ◽  
Accuracy And Precision ◽  
Significant Difference ◽  
Ft Ir

A new methodology, based on Fourier transform infrared spectroscopy equipped with an attenuated total reflectance accessory (ATR FT-IR), was developed for the determination of diclofenac sodium (DS) in dispersed commercially available tablets using chemometric tools such as partial least squares (PLS) coupled with discriminant analysis (PLS-DA). The results of PLS-DA depicted a perfect classification of the tablets into three different groups based on their DS concentrations, while the developed model with PLS had a sufficiently low root mean square error (RMSE) for the prediction of the samples’ concentration (~5%) and therefore can be practically used for any tablet with an unknown concentration of DS. Comparison with ultraviolet/visible (UV/Vis) spectrophotometry as the reference method revealed no significant difference between the two methods. The proposed methodology exhibited satisfactory results in terms of both accuracy and precision while being rapid, simple and of low cost.

scholarly journals Fatty Acid Prediction in Bovine Milk by Attenuated Total Reflection Infrared Spectroscopy after Solvent-Free Lipid Separation

Foods ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 1054
Author(s):  
Christopher Akhgar ◽  
Vanessa Nürnberger ◽  
Marlene Nadvornik ◽  
Margit Velik ◽  
Andreas Schwaighofer ◽  
...  
Keyword(s):  
Fatty Acid ◽  
Milk Fat ◽  
Regression Models ◽  
Bovine Milk ◽  
Attenuated Total Reflection ◽  
Solvent Free ◽  
Novel Approach ◽  
Whole Milk ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

In the present study, a novel approach for mid-infrared (IR)-based prediction of bovine milk fatty acid composition is introduced. A rapid, solvent-free, two-step centrifugation method was applied in order to obtain representative milk fat fractions. IR spectra of pure milk lipids were recorded with attenuated total reflection Fourier-transform infrared (ATR-FT-IR) spectroscopy. Comparison to the IR transmission spectra of whole milk revealed a higher amount of significant spectral information for fatty acid analysis. Partial least squares (PLS) regression models were calculated to relate the IR spectra to gas chromatography/mass spectrometry (GC/MS) reference values, providing particularly good predictions for fatty acid sum parameters as well as for the following individual fatty acids: C10:0 (R2P = 0.99), C12:0 (R2P = 0.97), C14:0 (R2P = 0.88), C16:0 (R2P = 0.81), C18:0 (R2P = 0.93), and C18:1cis (R2P = 0.95). The IR wavenumber ranges for the individual regression models were optimized and validated by calculation of the PLS selectivity ratio. Based on a set of 45 milk samples, the obtained PLS figures of merit are significantly better than those reported in literature using whole milk transmission spectra and larger datasets. In this context, direct IR measurement of the milk fat fraction inherently eliminates covariation structures between fatty acids and total fat content, which poses a common problem in IR-based milk fat profiling. The combination of solvent-free lipid separation and ATR-FT-IR spectroscopy represents a novel approach for fast fatty acid prediction, with the potential for high-throughput application in routine lab operation.

scholarly journals Preparation, Thermal, and Thermo-Mechanical Characterization of Polymeric Blends Based on Di(meth)acrylate Monomers

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 878
Author(s):  
Krystyna Wnuczek ◽  
Andrzej Puszka ◽  
Łukasz Klapiszewski ◽  
Beata Podkościelna
Keyword(s):  
Mechanical Analysis ◽  
Attenuated Total Reflection ◽  
Scanning Calorimetry ◽  
Force Microscopy ◽  
Chemical Structures ◽  
Atomic Force ◽  
Polymeric Blends ◽  
Ft Ir ◽  
Acrylate Monomers ◽  
Synthesized Materials

This study presents the preparation and the thermo-mechanical characteristics of polymeric blends based on di(meth)acrylates monomers. Bisphenol A glycerolate diacrylate (BPA.GDA) or ethylene glycol dimethacrylate (EGDMA) were used as crosslinking monomers. Methyl methacrylate (MMA) was used as an active solvent in both copolymerization approaches. Commercial polycarbonate (PC) was used as a modifying soluble additive. The preparation of blends and method of polymerization by using UV initiator (Irqacure® 651) was proposed. Two parallel sets of MMA-based materials were obtained. The first included more harmless linear hydrocarbons (EGDMA + MMA), whereas the second included the usually used aromatic copolymers (BPA.GDA + MMA). The influence of different amounts of PC on the physicochemical properties was discussed in detail. Chemical structures of the copolymers were confirmed by attenuated total reflection–Fourier transform infrared (ATR/FT-IR) spectroscopy. Thermo-mechanical properties of the synthesized materials were investigated by means of differential scanning calorimetry (DSC), thermogravimetric (TG/DTG) analyses, and dynamic mechanical analysis (DMA). The hardness of the obtained materials was also tested. In order to evaluate the surface of the materials, their images were obtained with the use of atomic force microscopy (AFM).

Diffusion Measurements Using FT-IR ATR Spectroscopy: Lubricant Diffusion in Polypropylene

2002 ◽  
Vol 56 (4) ◽  
pp. 509-514 ◽  
Author(s):  
Xiaohua Yi ◽  
Karen Nerbonne ◽  
John Pellegrino
Keyword(s):  
Current Model ◽  
Mineral Oil ◽  
Attenuated Total Reflection ◽  
Lubricant Layer ◽  
Polymer Interfaces ◽  
Time Resolved ◽  
Polymer Sample ◽  
Ft Ir ◽  
Atr Spectroscopy ◽  
Poly Propylene

We present an experimental method for measuring diffusion of lubricants (or any highly viscous fluid) in polymers using Fourier transform infrared (FT-IR) attenuated total reflection (ATR) spectroscopy. Unlike the conventional FT-IR ATR diffusion measurement, in which a polymer sample is sandwiched between the penetrant and an internal reflection element (IRE), in this method, a thin layer of penetrant (for example, a lubricant) is sandwiched between the IRE and the polymer sample. This allows accurate control and measurement of the thickness of the lubricant layer, which, in turn, facilitates subsequent data analysis. The diffusion is studied by monitoring the time-resolved change in absorbance of either a unique polymer or penetrant band. A feature of this new method is that it can provide an estimate of solubility, as well as an estimate of the diffusivity of the penetrant in the polymer. Using this method, we studied the diffusion of mineral oil and a commercial fluorocarbon ether lubricant (Krytox® 143AC‡) in poly(propylene) (PP) film at room temperature. The experimental data was modeled using a Fickian model with impermeable and saturated boundary conditions applied at the IRE/lubricant and lubricant/polymer interfaces, respectively. The diffusivity and solubility of mineral oil in PP were found to be 1.34 ± 0.35 (×10−10) cm2/s and 0.77 ± 0.13 (×10−2) g/g of PP, respectively. The current model was unable to quantitatively describe the diffusion of the Krytox® 143AC in the PP, possibly due to excessive swelling.

Chemical Structures of Native Oxides Formed During Wet Chemical Treatments on NH4F Treated Si(111) Surfaces

1992 ◽  
Vol 259 ◽  
Author(s):  
Takeo Hattori ◽  
Hiroki Ogawa
Keyword(s):  
Photoelectron Spectroscopy ◽  
Attenuated Total Reflection ◽  
Native Oxide ◽  
X Ray ◽  
Chemical Treatments ◽  
Chemical Structures ◽  
Native Oxides ◽  
Ft Ir ◽  
Wet Chemical ◽  
Silicon Interface

ABSTRACTChemical structures of native oxides formed during wet chemical treatments on NH4F treated Si(111) surfaces were investigated using X-ray Photoelectron Spectroscopy (XPS) and Fourier Transformed Infrared Attenuated Total Reflection(FT-IR-ATR). It was found that the amounts of Si-H bonds in native oxides and those at native oxide/silicon interface are negligibly small in the case of native oxides formed in H2SO4-H2O2-H2O solution. Based on this discovery, it was confirmed that native oxides can be characterized by the amount of Si-H bonds in native oxides. Furthermore, it was found that the combination of various wet chemical treatments with the treatment in NH4OH-H2O2-H2O solution results in the drastic decrease in the amount of Si-H bonds in native oxides.

scholarly journals ISOLATION OF 2-CHLOROBENZIMIDAZOLE FROM MELIA DUBIA LEAF EXTRACT AND ITS STRUCTURAL CHARACTERISATION

2017 ◽  
Vol 9 (10) ◽  
pp. 67 ◽  
Author(s):  
G. Dayana Jeyaleela ◽  
S. Irudaya Monisha ◽  
J. Rosaline Vimala ◽  
A. Anitha Immaculate
Keyword(s):  
Mass Spectrometry ◽  
1H Nmr ◽  
Research Work ◽  
Proton Nuclear Magnetic Resonance ◽  
Resonance Spectroscopy ◽  
Ft Ir ◽  
Uv Visible ◽  
Isolated Compound ◽  
Promising Source

Objective: Natural products from medicinal plants, either as isolated compounds or as standardized plant extracts exhibit promising source of medicinal activity against various diseases. The aim of the present work was to make an attempt of isolation of bioactive principle and characterization of the isolated compound, from the medicinal plant Melia dubaiMethods: The extraction was done by a cold percolation method and the compound was separated and isolated by chromatography technique such as a thin layer chromatography (TLC), column chromatography and high-performance liquid chromatography (HPLC). The isolated compound was crystallized and the structural characterization of the isolated compound was made using UV-Visible, FT-IR, 1H-NMR, GC-MS and MS techniques which confirmed the structure of the isolated compound.Results: The separated and isolated compound was characterized by both physical and spectral methods like Ultraviolet-Visible spectroscopy (UV-Visible), Fourier transform infrared spectroscopy (FT-IR), Proton Nuclear Magnetic Resonance Spectroscopy (1H-NMR), Gas chromatography-mass spectrometry (GC-MS), and Mass spectrometry(MS). Based on the studies, organizational characteristics of one bioactive principle were deciphered. The results revealed that the isolated species is 2-chlorobenzimidazole and it agreed well with the reported value and spectra for 2-chlorobenzimidazole.Conclusion: The above results obtained in this research work clearly indicated the promising occurrence of 2-chlorobenzimidazole in Media dubia plant leaves. The future scope of these studies may guide us to view the biological activity of the isolated compound.

scholarly journals Multivariate analytical methods for simultaneous estimation of Atenolol and Hydrochlorothiazide in bulk and tablet dosage form

2021 ◽  
Vol 6 (4) ◽  
pp. 205-208
Author(s):  
Sreenivasa Charan Archakam ◽  
Keerthisikha Palur ◽  
Praveen Kumar Arava
Keyword(s):  
Linear Regression ◽  
Matrix Method ◽  
Linear Regression Analysis ◽  
Molar Absorptivity ◽  
Simultaneous Estimation ◽  
Linear Regression Method ◽  
Spectrophotometric Methods ◽  
The Matrix ◽  
Ft Ir ◽  
Tablet Dosage

The present study aimed to develop simple, accurate and precise FTIR and UV spectrophotometric methods for the quantification of Atenolol and Hydrochlorothiazide in bulk and tablet dosage forms. FT-IR method like classical least squares (CLS) was developed within the range of 2366.69-3433.44; 1564.40-1673.30 cm- UV methods like Cramer’s matrix method (method-I) and linear regression analysis (Method II) were developed and they are based upon constructing the matrix set by using molar absorptivity values at 275.60 nm and 270.40 nm. The assay values for FTIR- CLS method were 102% and 108 % for Atenololand Hydrochlorothiazide respectively. Cramer’s matrix method results were found to be 95.15% and 104% for Atenolol and Hydrochlorothiazide respectively and for linear regression method they were found to be 98.50% and 106% (w/w).

scholarly journals SYNTHESIS OF AN AZIDE–THIOL LINKER FOR HETEROGENEOUS POLYMER FUNCTIONALIZATION VIA THE “CLICK” REACTION

2018 ◽  
Vol 55 (1B) ◽  
pp. 152
Author(s):  
Thuy Thu Truong
Keyword(s):  
Nuclear Magnetic Resonance ◽  
Click Reaction ◽  
Proton Nuclear Magnetic Resonance ◽  
Reaction Yield ◽  
Reaction Conditions ◽  
Click Reactions ◽  
Heterogeneous Polymer ◽  
Ft Ir ◽  
First Time ◽  
Layer Chromatography

In this study, the synthesis of a telechelic linker bearing both azide and thiol functional groups was described. The reaction conditions were investigated to optimize the reaction yield. The product was analyzed using thin layer chromatography (TLC) and proton nuclear magnetic resonance (1H NMR). The employment of the obtained azide–thiol linker in heterogeneous polymer “click” functionalization was demonstrated for the first time, which was monitored by an online FT–IR method. The obtained telechelic azide–thiol linker is envisioned to be useful chemical tools to link macromolecular chains via orthogonal click reactions.

Sign in / Sign up

Export Citation Format

Share Document