Cents versus scale steps: Can we tell the difference between major and minor thirds?

2021 ◽  
pp. 030573562098727
Author(s):  
Pedro Neto ◽  
Patricia M Vanzella
Keyword(s):  
Auditory Processing ◽  
Perceptual Quality ◽  
Chromatic Scale ◽  
Major Scale ◽  
Accurate Performance ◽  
The Difference ◽  
Scale Step ◽  
Frequency Ratios ◽  
Tonal Context

We report an experiment in which participants ( N = 368) were asked to differentiate between major and minor thirds. These intervals could either be formed by diatonic tones from the C major scale (tonal condition) or by a subset of tones from the chromatic scale (atonal condition). We hypothesized that in the tonal condition intervals would be perceived as a function of scale step distances, which we defined as the number of diatonic leaps between two notes of a given music scale. In the atonal condition, we hypothesized that intervals would be perceived as a function of cents. If our hypotheses were supported, we should verify a less accurate performance in the tonal condition, where scale step distances are the same between major and minor thirds. The data corroborated our hypotheses, and we suggest that acoustic measurements of intervallic distances (i.e., frequency ratios and cents) are not optimal when it comes to describing the perceptual quality of intervals in a tonal context. Finally, our research points to the possibility that, in comparison with previous models, scale steps and cents might better capture the notion of global versus local instances of auditory processing.

scholarly journals A Subjective Study on User Perception Aspects in Virtual Reality

2019 ◽  
Vol 9 (16) ◽  
pp. 3384 ◽  
Author(s):  
Huyen T. T. Tran ◽  
Nam P. Ngoc ◽  
Cuong T. Pham ◽  
Yong Ju Jung ◽  
Truong Cong Thang
Keyword(s):  
Virtual Reality ◽  
Perceptual Quality ◽  
Affecting Factors ◽  
Head Mounted Display ◽  
Number Of Factors ◽  
Significant Difference ◽  
Subjective Experiment ◽  
The Difference ◽  
Subjective Study

Three hundred and sixty degree video is becoming more and more popular on the Internet. By using a Head-Mounted Display, 360-degree video can render a Virtual Reality (VR) environment. However, it is still a big challenge to understand Quality of Experience (QoE) of 360-degree video since user experience during watching 360-degree video is a very complex phenomenon. In this paper, we aim to investigate four QoE aspects of 360-degree video, namely, perceptual quality, presence, cybersickness, and acceptability. In addition, four key QoE-affecting factors of encoding parameters, content motion, rendering device, and rendering mode are considered in our study. To the best of our knowledge, this is the first work that covers a large number of factors and QoE aspects of 360-degree video. In this study, a subjective experiment is conducted using 60 video versions generated from three original 360-degree videos. Based on statistical analysis of the obtained results, various findings on the impacts of the factors on the QoE aspects are provided. In particular, regarding the impacts of encoding parameters, it is found that the difference of QoE is negligible between video versions encoded at 4 K and 2.5 K resolutions. Also, it is suggested that 360-degree video should not be encoded at HD resolution or lower when watching in VR mode using Head Mounted Display. In addition, the bitrate for good QoE varies widely across different video contents. With respect to the content motion factor, its impact is statistically significant on the perceptual quality, presence, and cybersickness. In a comparison of two rendering device sets used in this study, there is no statistically significant difference found for the acceptability and cybersickness. However, the differences of the perceptual quality and presence are indicated to be statistically significant. Regarding the rendering mode, a comparison between VR and non-VR modes is also conducted. Although the non-VR mode always achieves higher perceptual quality scores and higher acceptability rates, more than a half of the viewers prefer the VR mode to the non-VR mode when watching versions encoded at the resolutions of fHD or higher. By contrast, the non-VR mode is preferred at the HD resolution.

Letter to the Editor: The Continuing Challenge of Evaluating RSD Impairment and Disability

1998 ◽  
Vol 3 (5) ◽  
pp. 8-10
Author(s):  
Robert L. Knobler ◽  
Charles N. Brooks ◽  
Leon H. Ensalada ◽  
James B. Talmage ◽  
Christopher R. Brigham
Keyword(s):  
Disability Evaluation ◽  
Body Part ◽  
Loss Of Function ◽  
Regulatory Requirements ◽  
Major Cardiac Event ◽  
Clinical Scenarios ◽  
Impairment Score ◽  
Occupational Activities ◽  
The Difference

Abstract The author of the two-part article about evaluating reflex sympathetic dystrophy (RSD) responds to criticisms that a percentage impairment score may not adequately reflect the disability of an individual with RSD. The author highlights the importance of recognizing the difference between impairment and disability in the AMA Guides to the Evaluation of Permanent Impairment (AMA Guides): impairment is the loss, loss of use, or derangement of any body part, system, or function; disability is a decrease in or the loss or absence of the capacity to meet personal, social, or occupational demands or to meet statutory or regulatory requirements because of an impairment. The disparity between impairment and disability can be encountered in diverse clinical scenarios. For example, a person's ability to resume occupational activities following a major cardiac event depends on medical, social, and psychological factors, but nonmedical factors appear to present the greatest impediment and many persons do not resume work despite significant improvements in functional capacity. A key requirement according to the AMA Guides is objective documentation, and the author agrees that when physicians consider the disability evaluation of people, more issues than those relating to the percentage loss of function should be considered. More study of the relationships among impairment, disability, and quality of life in patients with RSD are required.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

THE INFLUENCE OF TILLAGE SYSTEMS ON THE GROWTH, DEVELOPMENT AND YIELD OF LONG-FLAX

2020 ◽  
Author(s):  
V. Dumych ◽  
Keyword(s):  
Growth And Development ◽  
Field Experiments ◽  
Conservation Tillage ◽  
Mineral Fertilizers ◽  
Tillage Systems ◽  
Yield And Quality ◽  
Tillage System ◽  
The Difference ◽  
Flax Seeds

The purpose of research: to improve the technology of growing flax in the Western region of Ukraine on the basis of the introduction of systems for minimizing tillage, which will increase the yield of trusts and seeds. Research methods: field, laboratory, visual and comparative calculation method. Research results: Field experiments included the study of three tillage systems (traditional, canning and mulching) and determining their impact on growth and development and yields of trusts and flax seeds. The traditional tillage system included the following operations: plowing with a reversible plow to a depth of 27 cm, cultivation with simultaneous harrowing and pre-sowing tillage. The conservation system is based on deep shelfless loosening of the soil and provided for chiseling to a depth of 40 cm, disking to a depth of 15 cm, cultivation with simultaneous harrowing, pre-sowing tillage. During the implementation of the mulching system, disking to a depth of 15 cm, cultivation with simultaneous harrowing and pre-sowing tillage with a combined unit was carried out. Tillage implements and machines were used to perform tillage operations: disc harrow BDVP-3,6, reversible plow PON-5/4, chisel PCh-3, cultivator KPSP-4, pre-sowing tillage unit LK-4. The SZ-3,6 ASTPA grain seeder was used for sowing long flax of the Kamenyar variety. Simultaneously with the sowing of flax seeds, local application of mineral fertilizers (nitroammophoska 2 c/ha) was carried out. The application of conservation tillage allows to obtain the yield of flax trust at the level of 3,5 t/ha, which is 0,4 t/ha (12.9 %) more than from the area of traditional tillage and 0,7 t/ha (25 %) in comparison with mulching. In the area with canning treatment, the seed yield was the highest and amounted to 0,64 t/ha. The difference between this option and traditional and mulching tillage reaches 0,06 t/ha (10,3 %) and 0.10 t/ha (18.5 %), respectively. Conclusions. Preservation tillage, which is based on shelf-free tillage to a depth of 40 cm and disking to a depth of 15 cm has a positive effect on plant growth and development, yield and quality of flax.

Pengaruh ovaprim, aromatase inhibitor, dan hipofisa terhadap kualitas telur ikan Lele Dumbo (Clarias gariepinus)

2017 ◽  
Vol 5 (1) ◽  
Author(s):  
Erwin A. Aziz ◽  
Ockstan Kalesaran
Keyword(s):  
Survival Rate ◽  
Experimental Design ◽  
Aromatase Inhibitor ◽  
Fish Larvae ◽  
Clarias Gariepinus ◽  
Randomized Design ◽  
Completely Randomized Design ◽  
The Difference ◽  
Hatching Eggs

This study aimed to determine the effect of ovaprim hormone, aromatase inhibitor and pituitary on the quality of the catfish eggs (Clarias gariepinus). Experimental Design used was Completely Randomized Design (CRD) with four treatments, each with three replications. Treatment A: ovaprim; treatment B: Aromatase inhibitors, treatment C: hypophysis and treatment D: Control. The results showed that the difference in treatment gave highly significant effect on fertilization and hatching eggs but no significant effect on the survival rate of larvae. Aromatase inhibitor hormone was the best because it provided highly significant effect on fertilization (92.66%), hatchability of eggs (95%), and surviva rate (81.33%) of fish larvae.   Keywords : Clarias gariepinus. Ovaprim, Aromatase Inhibitor, Hypophysis, egg, larvae

Multivariate micropollutants analysis in marine waters

1995 ◽  
Vol 32 (9-10) ◽  
pp. 341-348
Author(s):  
V. Librando ◽  
G. Magazzù ◽  
A. Puglisi
Keyword(s):  
Multivariate Data Analysis ◽  
Partial Least Squares Regression ◽  
Environmental Chemistry ◽  
Sampling Site ◽  
Principal Component ◽  
Least Squares Regression ◽  
Organic Micropollutants ◽  
Suspended Material ◽  
The Difference

The monitoring of water quality today provides a great quantity of data consisting of the values of the parameters measured as a function of time. In the marine environment, and especially in the suspended material, increasing importance is being given to the presence of organic micropollutants, particularly since some are known to be carcinogenic. As the number of measured parameters increases examining the data and their consequent interpretation becomes more difficult. To overcome such difficulties, numerous chemometric techniques have been introduced in environmental chemistry, such as Multivariate Data Analysis (MVDA), Principal Component Analysis (PCA) and Partial Least Squares Regression (PLSR). The use of the first technique in this work has been applied to the interpretation of the quality of Augusta bay, by measuring the concentration of numerous organic micropollutants, together with the classical water pollution parameters, in different sites and at different times. The MVDA has highlighted the difference between various sampling sites whose data were initially thought to be similar. Furthermore, it has allowed a choice of more significant parameters for future monitoring and more suitable sampling site locations.

Non-steady variations of SOD and phosphate release rate due to changes in the quality of the overlying water

2000 ◽  
Vol 42 (3-4) ◽  
pp. 265-272 ◽  
Author(s):  
T. Inoue ◽  
Y. Nakamura ◽  
Y. Adachi
Keyword(s):  
Release Rate ◽  
Oxygen Demand ◽  
Phosphate Concentration ◽  
Sediment Oxygen Demand ◽  
Biochemical Reactions ◽  
Overlying Water ◽  
Phosphate Release ◽  
Do Concentration ◽  
The Difference

A dynamic model, which predicts non-steady variations in the sediment oxygen demand (SOD) and phosphate release rate, has been designed. This theoretical model consists of three diffusion equations with biochemical reactions for dissolved oxygen (DO), phosphate and ferrous iron. According to this model, step changes in the DO concentration and flow velocity produce drastic changes in the SOD and phosphate release rate within 10 minutes. The vigorous response of the SOD and phosphate release rate is caused by the difference in the time scale of diffusion in the water boundary layer and that of the biochemical reactions in the sediment. Secondly, a negative phosphate transfer from water to sediment can even occur under aerobic conditions. This is caused by the decrease in phosphate concentration in the aerobic layer due to adsorption.

Singular Values Decomposition and Lifting Wavelet Transform for Speech Signal Embedding into Digital Image

2019 ◽  
Vol 12 (2) ◽  
pp. 138-151
Author(s):  
Mourad Talbi ◽  
Med Salim Bouhlel
Keyword(s):  
Wavelet Transform ◽  
Speech Signal ◽  
Signal To Noise Ratio ◽  
Perceptual Quality ◽  
Lifting Wavelet Transform ◽  
Signal To Noise ◽  
Perceptual Evaluation ◽  
Lifting Wavelet ◽  
Noise Ratio

Background: In this paper, we propose a secure image watermarking technique which is applied to grayscale and color images. It consists in applying the SVD (Singular Value Decomposition) in the Lifting Wavelet Transform domain for embedding a speech image (the watermark) into the host image. Methods: It also uses signature in the embedding and extraction steps. Its performance is justified by the computation of PSNR (Pick Signal to Noise Ratio), SSIM (Structural Similarity), SNR (Signal to Noise Ratio), SegSNR (Segmental SNR) and PESQ (Perceptual Evaluation Speech Quality). Results: The PSNR and SSIM are used for evaluating the perceptual quality of the watermarked image compared to the original image. The SNR, SegSNR and PESQ are used for evaluating the perceptual quality of the reconstructed or extracted speech signal compared to the original speech signal. Conclusion: The Results obtained from computation of PSNR, SSIM, SNR, SegSNR and PESQ show the performance of the proposed technique.

Quality-of-Life Measurement in Advanced Cancer: Assessing the Individual

1999 ◽  
Vol 17 (11) ◽  
pp. 3603-3611 ◽  
Author(s):  
Dympna Waldron ◽  
Ciaran A. O'Boyle ◽  
Michael Kearney ◽  
Michael Moriarty ◽  
Desmond Carney
Keyword(s):  
Quality Of Life ◽  
Advanced Cancer ◽  
Internal Validity ◽  
Semistructured Interview ◽  
Incurable Cancer ◽  
Life Measurement ◽  
The Difference ◽  
The Individual ◽  
Very High

PURPOSE: Despite the increasing importance of assessing quality of life (QoL) in patients with advanced cancer, relatively little is known about individual patient's perceptions of the issues contributing to their QoL. The Schedule for the Evaluation of Individual Quality of Life (SEIQoL) and the shorter SEIQoL–Direct Weighting (SEIQoL-DW) assess individualized QoL using a semistructured interview technique. Here we report findings from the first administration of the SEIQoL and SEIQoL-DW to patients with advanced incurable cancer. PATIENTS AND METHODS: QoL was assessed on a single occasion using the SEIQoL and SEIQoL-DW in 80 patients with advanced incurable cancer. RESULTS: All patients were able to complete the SEIQoL-DW, and 78% completed the SEIQoL. Of a possible score of 100, the median QoL global score was as follows: SEIQoL, 61 (range, 24 to 94); SEIQoL-DW, 60.5 (range, 6 to 95). Psychometric data for SEIQoL indicated very high levels of internal consistency (median r = .90) and internal validity (median R2 = 0.88). Patients' judgments of their QoL were unique to the individual. Family concerns were almost universally rated as more important than health, the difference being significant when measured using the SEIQoL-DW (P = .002). CONCLUSION: Patients with advanced incurable cancer were very good judges of their QoL, and many patients rated their QoL as good. Judgments were highly individual, with very high levels of consistency and validity. The primacy given to health in many QoL questionnaires may be questioned in this population. The implications of these findings are discussed with regard to clinical assessment and advance directives.

Sign in / Sign up

Export Citation Format

Share Document