Rheological and textural analysis as tools for investigation of drug-polymer and polymer–polymer interactions on the example of low-acyl gellan gum and mesalazine

2022 ◽  
pp. 088532822110527
Author(s):  
Piotr Gadziński ◽  
Tomasz Zbigniew Osmałek ◽  
Anna Froelich ◽  
Oliwia Wilmańska ◽  
Agata Nowak ◽  
...  
Keyword(s):  
Profile Analysis ◽  
Polymer Network ◽  
Crosslinking Agent ◽  
Gellan Gum ◽  
Hydroxyethyl Cellulose ◽  
Rheological Analysis ◽  
Gelling Agents ◽  
Texture Profile ◽  
Ionic Crosslinking ◽  
Model Drug

Purpose. In the performed study, the rheological and textural parameters of gellan-based hydrogels were investigated and their dependence on three factors was taken into consideration: ( i) The presence of the model drug, ( ii) The presence and type of the ionic crosslinking agent, and ( iii) the composition of the polymer network. The objective was to compare two analytical methods, regarded as complementary, and define to what extent the obtained results correlate with each other. Methods. The hydrogels contained low-acyl gellan gum or its mixtures with hydroxyethyl cellulose or κ-carrageenan. CaCl2 and MgCl2 were used as gelling agents. Mesalazine was used as a model drug. The rheological analysis included oscillatory stress and frequency sweeping. The texture profile analysis was performed to calculate texture parameters. Results. Placebo gels without the addition of gelling agents had the weakest structure. The drug had the strongest ability to increase the stiffness of the polymer network. The weakest structure revealed the placebo samples without the addition of gelling agents. Texture analysis revealed no significant influence of the drug on the strength of the gels, while rheological measurements indicated clear differences. Conclusions. It can be concluded that in the case of some parameters methods correlate, that is, the effect related to gelling ions. However, the rheological analysis seems to be more precise and sensitive to some changes in the mechanical properties of the gels.

scholarly journals A Novel Approach for Tuning the Physicochemical, Textural, and Sensory Characteristics of Plant-Based Meat Analogs with Different Levels of Methylcellulose Concentration

Foods ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 560
Author(s):  
Allah Bakhsh ◽  
Se-Jin Lee ◽  
Eun-Yeong Lee ◽  
Nahar Sabikun ◽  
Young-Hwa Hwang ◽  
...  
Keyword(s):  
Profile Analysis ◽  
Control Sample ◽  
Texture Profile ◽  
Crude Fiber Content ◽  
A Value ◽  
Novel Approach ◽  
Meat Analog ◽  
And Control ◽  
Water Holding ◽  
Different Levels

This study assessed the effects of Methylcellulose (MC) at different concentrations on plant-based meat analog (PBMA) patties, comprised of commercial texture vegetable protein (C-TVP) and textured isolate soy protein (T-ISP) as key ingredients, and compared to beef patty control. A significantly higher difference was observed in moisture content in control with increasing MC concentration than the C-TVP and T-ISP patties. However, protein varied significantly among three different protein sources, with control had higher protein content than PBMA patties. Crude fiber content recorded higher values in C-TVP as compared to control. Significantly lower pH values were recorded in control than C-TVP and T-ISP respectively. Regardless, with the addition of MC or ingredient PBMA and control patties tend to reduce lightness (L*) and redness (a*) value after cooking. Although control sample before cooking exhibits lighter and redder than PBMA patties (C-TVP and T-ISP). Likewise, water holding capacity (WHC) decreases as the concentration of MC increases (1.5–4%) in control and PBMA patties. Warner-Bratzler shear force (WBSF) and texture profile analysis (TPA), including hardness, chewiness, and gumminess of control, were significantly higher than C-TVP and T-ISP. Consequently, panelists’ in the sensory analysis presented that C-TVP patties containing 3% of MC had better sensory properties than T-ISP. Hence, PBMA patties with C-TVP and incorporation of 3% MC are considered ideal for manufacturing of meat analog as related to control (beef).

scholarly journals Hybrid Acrylated Chitosan and Thiolated Pectin Cross-Linked Hydrogels with Tunable Properties

Polymers ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 266
Author(s):  
Shaked Eliyahu ◽  
Alexandra Galitsky ◽  
Esther Ritov ◽  
Havazelet Bianco-Peled
Keyword(s):  
Electrostatic Interactions ◽  
Profile Analysis ◽  
Hybrid Hydrogel ◽  
Texture Profile ◽  
Ph Values ◽  
X Ray Scattering ◽  
Wide Range ◽  
Michael Type Addition ◽  
Physical And Chemical ◽  
Hydrogel System

We developed and characterized a new hydrogel system based on the physical and chemical interactions of pectin partially modified with thiol groups and chitosan modified with acrylate end groups. Gelation occurred at high pectin thiol ratios, indicating that a low acrylated chitosan concentration in the hydrogel had a profound effect on the cross-linking. Turbidity, Fourier transform infrared spectroscopy, and free thiol determination analyses were performed to determine the relationships of the different bonds inside the gel. At low pH values below the pKa of chitosan, more electrostatic interactions were formed between opposite charges, but at high pH values, the Michael-type addition reaction between acrylate and thiol took place, creating harder hydrogels. Swelling experiments and Young’s modulus measurements were performed to study the structure and properties of the resultant hydrogels. The nanostructure was examined using small-angle X-ray scattering. The texture profile analysis showed a unique property of hydrogel adhesiveness. By implementing changes in the preparation procedure, we controlled the hydrogel properties. This hybrid hydrogel system can be a good candidate for a wide range of biomedical applications, such as a mucosal biomimetic surface for mucoadhesive testing.

scholarly journals Combined Effects of Calcium Addition and Thermal Processing on the Texture and In Vitro Digestibility of Starch and Protein of Black Beans (Phaseolus vulgaris)

Foods ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1368
Author(s):  
Marbie Alpos ◽  
Sze Ying Leong ◽  
Indrawati Oey
Keyword(s):  
Thermal Processing ◽  
Profile Analysis ◽  
Protein Digestibility ◽  
In Vitro Digestibility ◽  
Texture Profile ◽  
Black Beans ◽  
Calcium Addition ◽  
The Impact ◽  
Cacl2 Solution

Legumes are typically soaked overnight to reduce antinutrients and then cooked prior to consumption. However, thermal processing can cause over-softening of legumes. This study aimed to determine the effect of calcium addition (0, 100, 300, and 500 ppm in the form of calcium chloride, CaCl2), starting from the overnight soaking step, in reducing the loss of firmness of black beans during thermal processing for up to 2 h. The impact of calcium addition on the in vitro starch and protein digestibility of cooked beans was also assessed. Two strategies of calcium addition were employed in this study: (Strategy 1/S1) beans were soaked and then cooked in the same CaCl2 solution, or (Strategy 2/S2) cooked in a freshly prepared CaCl2 solution after the calcium-containing soaking medium was discarded. Despite the texture degradation of black beans brought about by increasing the cooking time, texture profile analysis (TPA) revealed that their hardness, cohesiveness, springiness, chewiness, and resilience improved significantly (p < 0.05) with increasing calcium concentration. Interestingly, beans cooked for 2 h with 300 ppm CaCl2 shared similar hardness with beans cooked for 1 h without calcium addition. Starch and protein digestibility of calcium-treated beans generally improved with prolonged cooking. However, calcium-treated beans cooked for 1 h under S2 achieved a reduced texture loss and a lower starch digestibility than those beans treated in S1. A lower starch digestion could be desired as this reflects a slow rise in blood glucose levels. Findings from this result also showed that treating black beans with high level of CaCl2 (i.e., 500 ppm) was not necessary, otherwise this would limit protein digestibility of cooked black beans.

scholarly journals Formulation of Topical Dosage Forms Containing Synthetic and Natural Anti-Inflammatory Agents for the Treatment of Rheumatoid Arthritis

Molecules ◽  
2020 ◽  
Vol 26 (1) ◽  
pp. 24
Author(s):  
Tunde Jurca ◽  
Liza Józsa ◽  
Ramona Suciu ◽  
Annamaria Pallag ◽  
Eleonora Marian ◽  
...  
Keyword(s):  
Rheumatoid Arthritis ◽  
Methyl Salicylate ◽  
Profile Analysis ◽  
Diclofenac Sodium ◽  
Diffusion Method ◽  
Membrane Diffusion ◽  
Calendula Officinalis ◽  
Texture Profile ◽  
Major Interest ◽  
Anti Inflammatory

Topical anti-inflammatory and analgesic effect for the treatment of rheumatoid arthritis is of major interest because of their fewer side effects compared to oral therapy. The purpose of this study was to prepare different types of topical formulations (ointments and gels) containing synthetic and natural anti-inflammatory agents with different excipients (e.g.,: surfactants, gel-forming) for the treatment of rheumatoid arthritis. The combination of Non-Steroidal Anti-Inflammatory Drugs (NSAIDs), diclofenac sodium, a topical analgesic agent methyl salicylate, and a lyophilized extract of Calendula officinalis with antioxidant effect were used in our formulations. The aim was to select the appropriate excipients and dosage form for the formulation in order to enhance the diffusion of active substances and to certify the antioxidant, analgesic, and anti-inflammatory effects of these formulations. To characterize the physicochemical properties of the formulations, rheological studies, and texture profile analysis were carried out. Membrane diffusion and permeability studies were performed with Franz-diffusion method. The therapeutic properties of the formulations have been proven by an antioxidant assay and a randomized prospective study that was carried out on 115 patients with rheumatoid arthritis. The results showed that the treatment with the gel containing diclofenac sodium, methyl salicylate, and lyophilized Calendula officinalis as active ingredients, 2-propenoic acid homopolymer (Synthalen K) as gel-forming excipient, distilled water, triethanolamine, and glycerol had a beneficial analgesic and local anti-inflammatory effect.

scholarly journals Retail Packaging Affects Colour, Water Holding Capacity, Texture and Oxidation of Sheep Meat more than Breed and Finishing Feed

Foods ◽  
2022 ◽  
Vol 11 (2) ◽  
pp. 144
Author(s):  
Minh Ha ◽  
Robyn Dorothy Warner ◽  
Caitlin King ◽  
Sida Wu ◽  
Eric N. Ponnampalam
Keyword(s):  
Profile Analysis ◽  
Vastus Lateralis ◽  
Modified Atmosphere Packaging ◽  
Water Holding Capacity ◽  
Standard Diet ◽  
Texture Profile ◽  
Sheep Meat ◽  
Camelina Meal ◽  
Finishing Feed ◽  
Water Holding

This study investigated the CIELab colour, water holding capacity, texture and oxidative stability of sheep meat from different breeds, finishing feeds, and retail packaging methods. Leg primal cuts from a subset of Composite wether lambs (n = 21) and Merino wether yearlings (n = 21) finished on a standard diet containing grain and cereal hay, a standard diet with camelina forage, or a standard diet with camelina meal, were used in this study. Semimembranosus and Vastus lateralis were packaged in vacuum skin packaging (VSP), or modified atmosphere packaging with 80% O2 and 20% CO2 (HioxMAP), or with 50% O2, 30% N2, and 20% CO2 (TrigasMAP). Packaging had a greater effect (p < 0.001) on L*, a*, b*, hue, and chroma than the effects from breed and finishing feed. Purge loss was affected by packaging. Cooking loss was affected by breed for Semimembranosus and packaging for both muscle types. HioxMAP and TrigasMAP increased WBSF and Texture Profile Analysis hardness of the meat compared to VSP. Lipid oxidation, assessed by TBARS, were lower in camelina forage or camelina meal supplemented diets and TrigasMAP compared to standard diet and HioxMAP, respectively. Total carbonyl and free thiol content were lower in VSP. Thus, supplementing feed with camelina forage or meal and lowering oxygen content in retail packaging by TrigasMAP or VSP are recommended to ensure optimal sheep meat quality.

scholarly journals Use of Alternative Gelling Agents Reveals the Role of Rhamnolipids in Pseudomonas aeruginosa Surface Motility

Biomolecules ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 1468
Author(s):  
Charles D. Morin ◽  
Eric Déziel
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Strong Dependence ◽  
Gellan Gum ◽  
Gelling Agent ◽  
Gelling Agents ◽  
Bacterial Surface ◽  
Solid Media ◽  
Surface Motility ◽  
Wetting Agents ◽  
The Impact

Pseudomonas aeruginosa is a motile bacterium able to exhibit a social surface behaviour known as swarming motility. Swarming requires the polar flagellum of P. aeruginosa as well as the secretion of wetting agents to ease the spread across the surface. However, our knowledge on swarming is limited to observed phenotypes on agar-solidified media. To study the surface behaviour and the impact of wetting agents of P. aeruginosa on other surfaces, we assessed surface motility capabilities of the prototypical strain PA14 on semi-solid media solidified with alternative gelling agents, gellan gum and carrageenan. We found that, on these alternative surfaces, the characteristic dendritic spreading pattern of P. aeruginosa is drastically altered. One striking feature is the loss of dependence on rhamnolipids to spread effectively on plates solidified with these alternative gelling agents. Indeed, a rhlA-null mutant unable to produce its wetting agents still spreads effectively, albeit in a circular shape on both the gellan gum- and carrageenan-based media. Our data indicate that rhamnolipids do not have such a crucial role in achieving surface colonization of non-agar plates, suggesting a strong dependence on the physical properties of the tested surface. The use of alternative gelling agent provides new means to reveal unknown features of bacterial surface behaviour.

scholarly journals Optimization of the texture of fat-based spread containing hull-less pumpkin (Cucurbita pepo L.) seed press-cake

2011 ◽  
pp. 131-143 ◽  
Author(s):  
Olga Radocaj ◽  
Etelka Dimic ◽  
Vesna Vujasinovic
Keyword(s):  
Press Cake ◽  
Profile Analysis ◽  
Peanut Butter ◽  
Pumpkin Seed ◽  
Texture Profile ◽  
Food Texture ◽  
Hemp Oil ◽  
Cold Pressed ◽  
Texture Attributes ◽  
Instrumental Texture

Hull-less pumpkin seed press-cake, a by-product of the pumpkin oil pressing process, was used to formulate a fat-based spread which resembled commercial peanut butter; both in the appearance and in texture. In this study, response surface methodology was used to investigate the effects of a commercial stabilizer and cold-pressed hemp oil added to the pumpkin seed press-cake, on the texture of the formulations using instrumental texture profile analysis. The responses were significantly affected by both variables tested in a central composite, two factorial experimental design on five levels. Strong and firm spreads, without visible oil separation were formed and had an appearance and texture comparable to commercial peanut butter. In terms of the primary food texture attributes such as hardness, cohesiveness and adhesiveness, determined by the instrumental texture analysis, the optimum combination of variables with 1-1.2% of added stabilizer and 20- 40% of added hemp oil (in the oil phase) produced desirable spreads.

Sign in / Sign up

Export Citation Format

Share Document