scholarly journals Effects of diet consistency on mandibular growth. A review

2019 ◽  
Vol 70 (3) ◽  
pp. 1603
Author(s):  
I.A. TSOLAKIS ◽  
C. VERIKOKOS ◽  
D. PERREA ◽  
E. BITSANIS ◽  
A.I. TSOLAKIS
Keyword(s):  
Bone Density ◽  
Experimental Studies ◽  
Masticatory Muscles ◽  
Diet Group ◽  
Mandibular Growth ◽  
Degree Of Mineralization ◽  
Soft Diet ◽  
Short Period ◽  
The Relationship ◽  
Diet Consistency

This article is a review that focuses on the diet consistency and how this affects mandibular morphology. Various published studies focused on the relationship between mastication and growth of the mandible because it is considered that mandibular growth is dependent on the loads exerted by the function of the masticatory muscles. Moreover it has been pointed out that the increase of orthodontic anomalies is due to the modern softer diet. Even in rats, soft diet is one of the factors causing malocclusions. All of the studies have been experimental, mainly in rodents, since this research is impossible to be applied on humans in a short period of time. Most experimental studies suggested that occlusal loading affects bone mass, bone amount, bone density, the length and the width of the bone, the degree of mineralization, the genetic expression, the collagen immunoreaction and the chondrocytes action on the cartilage. It is stated that bone volumes and thickness of the mandible of rats fed with soft diet were smaller when compared to animals fed with hard diet. Also the mandibles and condyles were smaller and less dense in the rats of soft diet as compared to controls. Furthermore the length and the width of the condyle in the soft diet group of animals were smaller as compared to the condyle of the hard diet group of animals. Soft diets affect also the degree of mineralization, and the action of the chondrocytes on the cartilage.

A Retrospective CBCT Study of the Relationship between Mandibular Symphysis Bone Density and Mandibular Growth Direction

2020 ◽  
Vol 44 (5) ◽  
pp. 356-365
Author(s):  
Jong-Moon Chae ◽  
Jay Gousman ◽  
Jung Won Seo ◽  
R Curtis Bay ◽  
Seong-Suk Jue ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Bone Density ◽  
Normal Growth ◽  
Growth Direction ◽  
Cone Beam ◽  
Mandibular Symphysis ◽  
Mandibular Growth ◽  
Adolescent Patients ◽  
Sagittal Slice ◽  
The Relationship

Objective: The objective of this retrospective study was to investigate the relationship between mandibular symphysis bone density (BD) and mandibular growth direction in adolescent patients by facilitating the measurement of cortical and cancellous BDs at the mandibular symphysis using cone beam computed tomography (CBCT). Study Design: 224 adolescent patients (98 males and 126 females) were categorized by sex, age, and mandibular growth direction. Cortical and cancellous BDs were measured along with a sagittal slice at multiple locations. Results: Females exhibited higher cortical BD than males at menton (Me, P =0.002). Patients with a posterior growth direction exhibited a higher cortical BD than those with anterior and normal growth direction at Me (P <0.021, P <0.001, respectively), pogonion (Pog, P =0.037, P =0.037, respectively) and genion (Ge, P =0.007, P =0.008, respectively). Patients with a posterior growth direction exhibited a higher cortical BD than those with anterior growth direction at B point (P =0.009). Conclusions: Significant differences in BD were identified across anthropometric categories. These findings may be useful in determining mandibular growth direction in adolescents.

Potential Role of Inflammation in Associations between Particulate Matter and Heart Failure

2018 ◽  
Vol 24 (3) ◽  
pp. 341-358 ◽  
Author(s):  
Xiaotong Ji ◽  
Yingying Zhang ◽  
Guangke Li ◽  
Nan Sang
Keyword(s):  
Heart Failure ◽  
Particulate Matter ◽  
Inflammatory Response ◽  
Heart Diseases ◽  
Experimental Studies ◽  
Epidemiological Studies ◽  
Inflammatory Mechanism ◽  
High Concentrations ◽  
Future Work ◽  
The Relationship

Recently, numerous studies have found that particulate matter (PM) exposure is correlated with increased hospitalization and mortality from heart failure (HF). In addition to problems with circulation, HF patients often display high expression of cytokines in the failing heart. Thus, as a recurring heart problem, HF is thought to be a disorder characterized in part by the inflammatory response. In this review, we intend to discuss the relationship between PM exposure and HF that is based on inflammatory mechanism and to provide a comprehensive, updated evaluation of the related studies. Epidemiological studies on PM-induced heart diseases are focused on high concentrations of PM, high pollutant load exposure in winter, or susceptible groups with heart diseases, etc. Furthermore, it appears that the relationship between fine or ultrafine PM and HF is stronger than that between HF and coarse PM. However, fewer studies paid attention to PM components. As for experimental studies, it is worth noting that coarse PM may indirectly promote the inflammatory response in the heart through systematic circulation of cytokines produced primarily in the lungs, while ultrafine PM and its components can enter circulation and further induce inflammation directly in the heart. In terms of PM exposure and enhanced inflammation during the pathogenesis of HF, this article reviews the following mechanisms: hemodynamics, oxidative stress, Toll-like receptors (TLRs) and epigenetic regulation. However, many problems are still unsolved, and future work will be needed to clarify the complex biologic mechanisms and to identify the specific components of PM responsible for adverse effects on heart health.

scholarly journals Experimental studies on the transformation from firn to ice in the wet-snow zone of temperate glaciers

1997 ◽  
Vol 24 ◽  
pp. 181-185 ◽  
Author(s):  
Katsuhisa Kawashima ◽  
Tomomi Yamada
Keyword(s):  
Experimental Studies ◽  
Ice Formation ◽  
Compression Tests ◽  
Densification Rate ◽  
Overburden Pressure ◽  
Proportionality Constant ◽  
Wet Snow ◽  
Water Saturated ◽  
The Relationship ◽  
Good Agreement

The densification of water-saturated firn, which had formed just above the firn-ice transition in the wet-snow zone of temperate glaciers, was investigated by compression tests under pressures ranging from 0.036 to 0.173 MPa, with special reference to the relationship between densification rate, time and pressure. At each test, the logarithm of the densification rate was proportional to the logarithm of the time, and its proportionality constant increased exponentially with increasing pressure. The time necessary for ice formation in the firn aquifer was calculated using the empirical formula obtained from the tests. Consequently, the necessary time decreased exponentially as the pressure increased, which shows that the transformation from firn in ice can be completed within the period when the firn aquifer exists, if the overburden pressure acting on the water-saturated firn is above 0.12–0.14 MPa. This critical value of pressure was in good agreement with the overburden pressure obtained from depth–density curves of temperate glaciers. It was concluded that the depth of firn–ice transition was self-balanced by the overburden pressure to result in the concentration between 20 and 30 m.

scholarly journals Cardiovascular disease and osteoporosis: is there a link between lipids and bone?

2002 ◽  
Vol 39 (3) ◽  
pp. 203-210 ◽  
Author(s):  
John R Burnett ◽  
Samuel D Vasikaran
Keyword(s):  
Cardiovascular Disease ◽  
Bone Density ◽  
Vascular Calcification ◽  
Cholesterol Biosynthesis ◽  
Hormone Replacement ◽  
Plasma Lipid ◽  
Clinical Effects ◽  
Cardiovascular Morbidity And Mortality ◽  
The Relationship

Atherosclerotic heart disease and osteoporosis are both diseases of old age. Evidence is accumulating for a link between vascular and bone disease. Calcification is a common feature of atherosclerotic plaques, and osteoporosis is associated with both atherosclerosis and vascular calcification. However, the relationship of vascular calcification to the pathogenesis of atherosclerosis remains incompletely understood. Hormone replacement therapy has beneficial effects in the prevention of both atherosclerosis and osteoporosis. Bisphosphonates inhibit bone resorption and are used in the treatment of osteoporosis, whereas the statins inhibit cholesterol biosynthesis and are used for the treatment of atherosclerosis. We have reviewed recent advances in the knowledge of the actions of bisphosphonates and statins at the cellular, molecular and end-organ levels in order to examine the relationship between cardiovascular disease and osteoporosis and to explore the link between lipids and bones. These studies suggest that the mechanism of actions of these two classes of drugs at the cellular level may not be mutually exclusive. There are some early clinical data to complement these findings, suggesting that statins increase bone density and bisphosphonates may have a beneficial effect in vivo on plasma lipid levels and on the atherosclerotic process. Properly designed prospective studies that examine the effect of statins on bone density and fractures, as well as the effects of bisphosphonates on lipid profiles, atherosclerotic progression and cardiovascular morbidity and mortality are needed to define clearly the clinical effects and potential new roles for these agents.

scholarly journals Application of intelligent orienteering based on Internet of things

2020 ◽  
Vol 2020 (1) ◽  
Author(s):  
Donghui Zhang ◽  
Ruijie Liu
Keyword(s):  
Internet Of Things ◽  
Network Architecture ◽  
Emergency Services ◽  
Simulation Experiment ◽  
Experimental Studies ◽  
Signal Stability ◽  
Anchor Nodes ◽  
Set Up ◽  
The Relationship ◽  
The Internet Of Things

Abstract Orienteering has gradually changed from a professional sport to a civilian sport. Especially in recent years, orienteering has been widely popularized. Many colleges and universities in China have also set up this course. With the improvement of people’s living conditions, orienteering has really become a leisure sport in modern people’s life. The reduced difficulty of sports enables more people to participate, but it also exposes a series of problems. As the existing positioning technology is relatively backward, the progress in personnel tracking, emergency services, and other aspects is slow. To solve these problems, a new intelligent orienteering application system is developed based on the Internet of things. ZigBee network architecture is adopted in the system. ZigBee is the mainstream scheme in the current wireless sensor network technology, which has many advantages such as convenient carrying, low power consumption, and signal stability. Due to the complex communication environment in mobile signal, the collected information is processed by signal amplification and signal anti-interference technology. By adding anti-interference devices, video isolators and other devices, the signal is guaranteed to the maximum extent. In order to verify the actual effect of this system, through a number of experimental studies including the relationship between error and traffic radius and the relationship between coverage and the number of anchor nodes, the data shows that the scheme studied in this paper has a greater improvement in comprehensive performance than the traditional scheme, significantly improving the accuracy and coverage. Especially the coverage is close to 100% in the simulation experiment. This research has achieved good results and can be widely used in orienteering training and competition.

Assessing the Relationship Between Bone Density and Loss of Reduction in Nonsurgical Distal Radius Fracture Treatment

2021 ◽  
Author(s):  
Jason H. Ghodasra ◽  
Imran S. Yousaf ◽  
Kavya K. Sanghavi ◽  
Tamara D. Rozental ◽  
Kenneth R. Means ◽  
...  
Keyword(s):  
Bone Density ◽  
Distal Radius Fracture ◽  
Distal Radius ◽  
Radius Fracture ◽  
Fracture Treatment ◽  
Loss Of Reduction ◽  
The Relationship

Relation between understanding and agreeing in response to one-sentence assertion*

2014 ◽  
Vol 7 (1) ◽  
pp. 36-67 ◽  
Author(s):  
YASUHIRO OZURU ◽  
DAVID BOWIE ◽  
GIULIA KAUFMAN
Keyword(s):  
Cognitive Processes ◽  
Experimental Studies ◽  
Cognitive Response ◽  
Response Options ◽  
Evaluative Response ◽  
Quasi Experimental ◽  
The Relationship

abstractThree quasi-experimental studies were conducted to investigate the relationship between the evaluative (i.e., agree/true) and the meta-cognitive (i.e., understand) response, and to determine which type of response people are more likely to provide when responding to one-sentence assertive statements. In Studies 1 and 2, participants performed two separate tasks in which they were asked to indicate the levels of: (i) understanding and (ii) agreement / perceived truthfulness of 126 one-sentence statements. The results indicated that participants were likely to provide a negative evaluative response (i.e., disagree/false) to a statement that they did not understand. In Study 3, participants were asked to evaluate the same 126 statements and choose between four response options: agree, disagree, understand, do not understand. The results indicated that people are more likely provide an evaluative response regardless of the understandability of a statement. The results of these studies are discussed in relation to (i) pragmatic perspective of how people infer speakers’ meaning, and (ii) cognitive processes underlying evaluative and meta-cognitive response.

ANALYSIS OF THE ERROR IN DETERMINING THE EQUIVALENT SIZE OF A DEFECT BY THE STANDARDLESS METHOD DURING ULTRASONIC TESTING

2021 ◽  
pp. 50-57
Author(s):  
A. N. Kireev ◽  
M. A. Kireeva
Keyword(s):  
Relative Error ◽  
High Reliability ◽  
Ultrasonic Method ◽  
Experimental Studies ◽  
Standard Samples ◽  
Defect Identification ◽  
Identification Method ◽  
Maximum Value ◽  
Software Product ◽  
The Relationship

The article provides a review and analysis of the defect identification method for determining the size of discontinuities when diagnosing various machine parts and units by the manual ultrasonic method. This method makes it possible to determine the equivalent size of discontinuities of various types without using standard samples of an enterprise: point planar and volumetric; extended planar and volumetric. The method is based on the use of the relationship between the amplitude and time characteristics of the echo signal from the discontinuity and the backside signal in the object being diagnosed and the equivalent size of the discontinuity. The article presents the mathematical apparatus for the implementation of this method. Also presented is a software product that allows you to automate calculations when using this defect identification method. The article contains experimental studies of the method for determining the equivalent dimensions of discontinuities of various types, which have shown its high reliability. The maximum value of the relative error in determining the equivalent size of a point planar discontinuity was 2.867 %. The maximum value of the relative error in determining the equivalent size of a point volumetric discontinuity was 1.986 %. The maximum value of the relative error in determining the transverse equivalent size of an extended planar discontinuity was 0.667 %. The maximum value of the relative error in determining the transverse equivalent size of an extended volumetric discontinuity was 1.95 %.

SOFTWARE FOR CONTROL SYSTEMS FOR «SMART» RESIDENTIAL BUILDING

2021 ◽  
Vol 14 (1) ◽  
pp. 58-67
Author(s):  
Sergey Polyakov ◽  
V. Akimov ◽  
A. Polukazakov ◽  
Vladimir Zolnikov ◽  
P. Enin
Keyword(s):  
Structural Changes ◽  
Life Support ◽  
Assembly Language ◽  
Experimental Studies ◽  
Residential Building ◽  
Heating System ◽  
Liquid Level ◽  
Virtual Object ◽  
Level Control ◽  
The Relationship

The article deals with the issues of modeling and management of life support systems of a residential building. The resulting model of the liquid level in the tank allows you to establish the relationship between the level and the flow rate of the liquid. The results of the selection and justification of the fluid level control structure are presented. An algorithm that implements the operation of a virtual object is given. The structure of the automatic control system (ACS) of the liquid level is technically implemented in an open type. The results confirming the achievability of the proposed structural changes are obtained. The results of experimental studies are presented. The choice and justification of the method of controlling the heating system and the liquid level in the tank are considered. Programs for managing subsystems of a residential building in Assembly language, C++, and ladder diagrams are presented. A model for controlling the liquid level in a Multisim environment is proposed.

Sign in / Sign up

Export Citation Format

Share Document