scholarly journals Relationship between impact characteristics and launch direction in softball hitting: A study involving elite players

PLoS ONE ◽  
2021 ◽  
Vol 16 (11) ◽  
pp. e0260520
Author(s):  
Shuji Kidokoro ◽  
Yoshitaka Morishita
Keyword(s):  
Motion Capture ◽  
Elevation Angle ◽  
Limiting Factors ◽  
Stepwise Multiple Regression ◽  
Ball Impact ◽  
Exit Velocity ◽  
Opposite Field ◽  
The Common ◽  
Impact Characteristics ◽  
The Impact

In the game of softball, the batter should possess the necessary skills to hit the ball toward various directions with high initial speed. However, because various factors influence each other, there are limitations to the range that can be controlled by the batter’s skill. This study was aimed at extracting the impact characteristics associated with the launch speed/direction and batted ball spin and clarifying the important skills required to improve the batter’s hitting performance. In our experiments, 20 female softball players, who are members of the Japan women’s national softball team, hit balls launched from a pitching machine. The movements of the ball and bat before, during, or after the impact were recorded using a motion capture system. Stepwise multiple regression analysis was performed to extract factors relating the side spin rate. The undercut angle (elevation angle between the bat’s trajectory and the common normal between the ball and bat: ΔR2 = 0.560) and the horizontal bat angle (azimuth of bat’s long axis at ball impact: ΔR2 = 0.299) were strongly associated with the side spin rate (total R2 = 0.893, p < 0.001). The undercut angle in opposite-field hitting was significantly larger than that in pull-side hitting (p < 0.001). The side spin rate was associated with the undercut angle because the bat’s distal (barrel) side inclined downward (–29.6 ± 8.7°) at impact. The ball exit velocity was higher when it was hit at a smaller undercut angle (R2 = 0.523, p < 0.001). Therefore, it is deemed desirable to focus on maximizing the ball exit velocity rather than ball spin because the ball–bat impact characteristics vary inevitably depending on the launch direction. Meanwhile, the use of the ball delivery machine and the slower pitched ball are the limiting factors in the generalization of the findings.

scholarly journals Pedestrian recognition using automotive radar sensors

2012 ◽  
Vol 10 ◽  
pp. 45-55 ◽  
Author(s):  
A. Bartsch ◽  
F. Fitzek ◽  
R. H. Rasshofer
Keyword(s):  
Machine Learning ◽  
Elevation Angle ◽  
Real Life ◽  
Doppler Frequency ◽  
Radar Data ◽  
Limiting Factors ◽  
Automotive Radar ◽  
Signal Processing Algorithm ◽  
Radar Sensors ◽  
The Impact

Abstract. The application of modern series production automotive radar sensors to pedestrian recognition is an important topic in research on future driver assistance systems. The aim of this paper is to understand the potential and limits of such sensors in pedestrian recognition. This knowledge could be used to develop next generation radar sensors with improved pedestrian recognition capabilities. A new raw radar data signal processing algorithm is proposed that allows deep insights into the object classification process. The impact of raw radar data properties can be directly observed in every layer of the classification system by avoiding machine learning and tracking. This gives information on the limiting factors of raw radar data in terms of classification decision making. To accomplish the very challenging distinction between pedestrians and static objects, five significant and stable object features from the spatial distribution and Doppler information are found. Experimental results with data from a 77 GHz automotive radar sensor show that over 95% of pedestrians can be classified correctly under optimal conditions, which is compareable to modern machine learning systems. The impact of the pedestrian's direction of movement, occlusion, antenna beam elevation angle, linear vehicle movement, and other factors are investigated and discussed. The results show that under real life conditions, radar only based pedestrian recognition is limited due to insufficient Doppler frequency and spatial resolution as well as antenna side lobe effects.

The impact of applying the Common Customs Tariff on the armenian export of Cut and Polished Gems to Russia

2019 ◽  
pp. 33-41
Author(s):  
V. L. Harutyunyan ◽  
S. V. Dokholyan ◽  
A. R. Makaryan
Keyword(s):  
Manufacturing Sector ◽  
Practical Implication ◽  
Dominant Role ◽  
New Technology ◽  
Manufacturing Companies ◽  
Medium Term ◽  
Diamond Cutting ◽  
Global Trends ◽  
The Common ◽  
The Impact

The presented study discusses the issues of applying the Common Customs Tariff (CCT) rates of the Eurasian Economic Union (EAEU) on rough diamonds and the impact thereof on the exports of stones cut and polished inArmeniaand then exported toRussia.Aim. The study aims to identify the possible strategies Armenian diamond cutting and polishing companies could adopt as a response to the application of the CCT rates on rough diamonds and how it would affect exports to various destinations, namely to Russia.Tasks. The authors analyze the current state of the gems and jewelry sector and substantiate the need to either integrate it into the jewelry manufacturing sector or to apply various strategies to facilitate exports to either Russia or other destinations in the medium term in response to the application of the CCT rates.Methods. This study uses general scientific methods of cognition, including analytical and methodological approaches and elements of forecasting. Possible strategies the Armenian diamond cutting and polishing companies could adopt in the medium term in response to the application of the EAEU CCT rates are determined using the analytical research method, forecasts in the context of the developments in the Armenian gem processing and jewelry market and global trends, statistical data on the imports and exports of cut and polished gems and jewelry for 2014–2018 published by the UN Comtrade Statistics.Results. Statistics on the exports of processed diamonds from 2014 to 2018 highlights the issue associated with the loss of competitiveness suffered by Armenian companies (mainly in comparison with Indian diamond cutters). The major global trends in the diamond cutting and polishing business indicate that it could be virtually impossible for Armenian cutters and polishers to compete with Indian companies in the medium term if they do not comes to investing in new technology to achieve operational efficiency. For these companies, it is important not to lose the Russian market due to an increase in the tariff rate and concentrate on the processing of gems that are larger than 1 carat. Another strategy to avoid an increase in the customs tariff rates would depend on the Armenian government’s ability to negotiate with Russia in respect of direct imports of diamond stones from Russian manufactures. Two other options for Armenian cutters involve focusing on cutting and polishing of rubies, sapphires, emeralds, etc. or integrating into the jewelry sector either by being the primary supplier or by considering this business as a channel to sell processed diamond stones by setting up their own jewelry manufacturing companies.Conclusions. With CCT going into effect in January 2021 and India’s dominant role in the diamond cutting and polishing business, Armenia needs to carefully consider all of the strategies the Armenian companies could adopt, as discussed above. As a member state of the EAEU, Armenia freely exports to Russia, however, further exports to Russia would depend on Armenia’s ability to ensure that cost-effective operations are in place, or to concentrate on the processing of precious gems rather than diamonds, or to switch to the manufacturing of jewelry items as a major export item.Practical Implication. The findings of this study could be of interest to the Ministry of Economy of the Republic of Armenia and Business Armenia that could be used in elaborating the strategy for the development of Armenian gems and jewelry sector of the economy.

The Impact of Applying the Common Customs Tariff on Armenian Exports of Tobacco Products

2020 ◽  
Vol 26 (4) ◽  
pp. 358-365
Author(s):  
V. L. Harutyunyan ◽  
S. V. Dokholyan ◽  
A. R. Makaryan
Keyword(s):  
Tobacco Products ◽  
The Common ◽  
The Impact

Marine Quality Standards: Their Derivation and Application in the United Kingdom

1985 ◽  
Vol 17 (6-7) ◽  
pp. 1187-1198 ◽  
Author(s):  
G. Mance ◽  
A. R. O'Donnell
Keyword(s):  
Coastal Waters ◽  
Sublethal Effects ◽  
Quality Standards ◽  
Toxicity Data ◽  
Marine Life ◽  
Nickel Zinc ◽  
The United Kingdom ◽  
The Common ◽  
Lead Nickel ◽  
The Impact

This paper discusses the derivation of environmental quality standards for coastal waters and the difficulties of using such standards for controlling industrial discharges. Attention is focused on the common List II substances, copper, chromium, lead, nickel, zinc and arsenic - and their effects on marine life. The adequacy of existing toxicity data is discussed and it is concluded that long exposure tests are required to provide information on sublethal effects. Such data are currently limited. It is also important that consideration be given to the effects that reducing salinities and increasing temperatures have in increasing the toxicity of these substances. The complexity of interpreting the results of laboratory toxicity data to coastal waters is discussed with reference to a study of the impact of an industrial discharge.

Larvae of the blow fly Caiusa testacea (Diptera: Calliphoridae) as egg predators of Polypedates cruciger Blyth, 1852 (Amphibia: Anura: Rhacophoridae)

2020 ◽  
Vol 12 (17) ◽  
pp. 17374-17379
Author(s):  
W.G.D. Chathuranga ◽  
K. Kariyawasam ◽  
Anslem De Silva ◽  
W.A.Priyanka P. De Silva
Keyword(s):  
Sri Lanka ◽  
High Impact ◽  
Tree Frog ◽  
Blow Fly ◽  
Breeding Habitats ◽  
The Family ◽  
Water Container ◽  
The Common ◽  
Natural Breeding ◽  
The Impact

We investigated the impact of dipteran predators on eggs in foam nests of the Common Hour-glass Tree Frog Polypedates cruciger Blyth, 1852 (Anura: Rhacophoridae) in central Sri Lanka.  Foam nests (n=24) of P. cruciger were examined at their natural breeding habitats and infected (n=8) and uninfected spawns (n=16) were identified.  Emerging tadpoles were collected in a water container hung under each spawn and the average number of tadpoles (N) hatched from infected spawns (N=0) was compared with that of uninfected spawns (N=354 ± 67).  Three severely infected spawns were brought to the laboratory and the fly larvae were reared until they metamorphosed to adults.  Morphological and molecular identification of the flies confirmed them as belonging to Caiusa testacea Senior-White, 1923 of the family Calliphoridae.  The infected spawns were completely destroyed and an estimated average of 400 P. cruciger eggs per spawn were lost.  The results revealed a high impact of Caiusa testacea on egg and embryo mortality of P. cruciger.

Theory and Method and the Stakes of a Fragmented Discipline: Or, What Economics Taught Me About the Study of Religion

2020 ◽  
Author(s):  
Thomas A Lewis
Keyword(s):  
Religious Studies ◽  
The Public ◽  
Global Pandemic ◽  
Recent Developments ◽  
The Common ◽  
The Impact ◽  
Academic Study

Abstract As a discipline, the academic study of religion is strikingly fragmented, with little engagement or shared criteria of excellence across subfields. Although important recent developments have expanded the traditions and peoples studied as well as the methods used, the current extent of fragmentation limits the impact of this diversification and pluralization. At a moment when the global pandemic is catalyzing profound pressures on our universities and disciplines, this fragmentation makes it difficult to articulate to the public, to non-religious studies colleagues, and to students why the study of religion matters. We therefore too often fall back on platitudes. I argue for a revitalized methods and theories conversation that connects us even as it bears our arguments and disagreements about what we do and how. Courses in methods and theories in the study of religion represent the most viable basis we have for bringing the academic study of religion into the common conversation or argument that constitutes a discipline without sacrificing our pluralism.

scholarly journals Roles of Microglial Ion Channel in Neurodegenerative Diseases

2021 ◽  
Vol 10 (6) ◽  
pp. 1239
Author(s):  
Alexandru Cojocaru ◽  
Emilia Burada ◽  
Adrian-Tudor Bălșeanu ◽  
Alexandru-Florian Deftu ◽  
Bogdan Cătălin ◽  
...  
Keyword(s):  
Ion Channels ◽  
Neurodegenerative Diseases ◽  
Excitable Cells ◽  
Proton Channels ◽  
Voltage Gated ◽  
Cellular Processes ◽  
Pathological Conditions ◽  
The Common ◽  
Transient Receptor ◽  
The Impact

As the average age and life expectancy increases, the incidence of both acute and chronic central nervous system (CNS) pathologies will increase. Understanding mechanisms underlying neuroinflammation as the common feature of any neurodegenerative pathology, we can exploit the pharmacology of cell specific ion channels to improve the outcome of many CNS diseases. As the main cellular player of neuroinflammation, microglia play a central role in this process. Although microglia are considered non-excitable cells, they express a variety of ion channels under both physiological and pathological conditions that seem to be involved in a plethora of cellular processes. Here, we discuss the impact of modulating microglia voltage-gated, potential transient receptor, chloride and proton channels on microglial proliferation, migration, and phagocytosis in neurodegenerative diseases.

scholarly journals Measurement of the Sea Surface Height with Airborne GNSS Reflectometry and Delay Bias Calibration

2021 ◽  
Vol 13 (15) ◽  
pp. 3014
Author(s):  
Feng Wang ◽  
Dongkai Yang ◽  
Guodong Zhang ◽  
Jin Xing ◽  
Bo Zhang ◽  
...  
Keyword(s):  
Wind Speed ◽  
Arrival Time ◽  
Elevation Angle ◽  
Satellite System ◽  
Sea Surface Height ◽  
Antenna Pattern ◽  
Sea Surface ◽  
Observation Method ◽  
Global Navigation Satellite ◽  
The Impact

Sea surface height can be measured with the delay between reflected and direct global navigation satellite system (GNSS) signals. The arrival time of a feature point, such as the waveform peak, the peak of the derivative waveform, and the fraction of the peak waveform is not the true arrival time of the specular signal; there is a bias between them. This paper aims to analyze and calibrate the bias to improve the accuracy of sea surface height measured by using the reflected signals of GPS CA, Galileo E1b and BeiDou B1I. First, the influencing factors of the delay bias, including the elevation angle, receiver height, wind speed, pseudorandom noise (PRN) code of GPS CA, Galileo E1b and BeiDou B1I, and the down-looking antenna pattern are explored based on the Z-V model. The results show that (1) with increasing elevation angle, receiver height, and wind speed, the delay bias tends to decrease; (2) the impact of the PRN code is uncoupled from the elevation angle, receiver height, and wind speed, so the delay biases of Galileo E1b and BeiDou B1I can be derived from that of GPS CA by multiplication by the constants 0.32 and 0.54, respectively; and (3) the influence of the down-looking antenna pattern on the delay bias is lower than 1 m, which is less than that of other factors; hence, the effect of the down-looking antenna pattern is ignored in this paper. Second, an analytical model and a neural network are proposed based on the assumption that the influence of all factors on the delay bias are uncoupled and coupled, respectively, to calibrate the delay bias. The results of the simulation and experiment show that compared to the meter-level bias before the calibration, the calibrated bias decreases the decimeter level. Based on the fact that the specular points of several satellites are visible to the down-looking antenna, the multi-observation method is proposed to calibrate the bias for the case of unknown wind speed, and the same calibration results can be obtained when the proper combination of satellites is selected.

scholarly journals Viscoelastometric Testing to Assess Hemostasis of COVID-19: A Systematic Review

2021 ◽  
Vol 10 (8) ◽  
pp. 1740
Author(s):  
Marion Bareille ◽  
Michaël Hardy ◽  
Jonathan Douxfils ◽  
Stéphanie Roullet ◽  
Dominique Lasne ◽  
...  
Keyword(s):  
Systematic Review ◽  
Mechanical Strength ◽  
Small Sample ◽  
The Common ◽  
Small Sample Sizes ◽  
Definition Of ◽  
Reported Data ◽  
Prophylactic Anticoagulation ◽  
The Impact ◽  
Heparin Neutralization

Infection by SARS-CoV-2 is associated with a high risk of thrombosis. The laboratory documentation of hypercoagulability and impaired fibrinolysis remains a challenge. Our aim was to assess the potential usefulness of viscoelastometric testing (VET) to predict thrombotic events in COVID-19 patients according to the literature. We also (i) analyzed the impact of anticoagulation and the methods used to neutralize heparin, (ii) analyzed whether maximal clot mechanical strength brings more information than Clauss fibrinogen, and (iii) critically scrutinized the diagnosis of hypofibrinolysis. We performed a systematic search in PubMed and Scopus databases until December 31st, 2020. VET methods and parameters, and patients’ features and outcomes were extracted. VET was performed for 1063 patients (893 intensive care unit (ICU) and 170 non-ICU, 44 studies). There was extensive heterogeneity concerning study design, VET device used (ROTEM, TEG, Quantra and ClotPro) and reagents (with non-systematic use of heparin neutralization), timing of assay, and definition of hypercoagulable state. Notably, only 4 out of 25 studies using ROTEM reported data with heparinase (HEPTEM). The common findings were increased clot mechanical strength mainly due to excessive fibrinogen component and impaired to absent fibrinolysis, more conspicuous in the presence of an added plasminogen activator. Only 4 studies out of the 16 that addressed the point found an association of VETs with thrombotic events. So-called functional fibrinogen assessed by VETs showed a variable correlation with Clauss fibrinogen. Abnormal VET pattern, often evidenced despite standard prophylactic anticoagulation, tended to normalize after increased dosing. VET studies reported heterogeneity, and small sample sizes do not support an association between the poorly defined prothrombotic phenotype of COVID-19 and thrombotic events.

Sign in / Sign up

Export Citation Format

Share Document