scholarly journals IMPROVING THE QUALITY OF FIRE RISK ASSESSMENT BY USING EVACUATION SIMULATION SOFTWARE

2016 ◽  
Author(s):  
Srđan Popov ◽  
Mirjana Laban ◽  
Suzana Vukoslavčević ◽  
Slobodan Šupić ◽  
Sanja Milanko
Keyword(s):  
Fire Safety ◽  
Fire Risk ◽  
Simulation Software ◽  
Evacuation Simulation ◽  
Fire Event ◽  
Software Models ◽  
Wide Range ◽  
Time Required ◽  
Novi Sad

The time required for evacuation of all persons who could be present in the building during a fire event depends on a number of factors, some of which are very difficult to predict. In order to achieve more realistic evaluation of the evacuation process, engineers are increasingly turning towards evacuation computer models. These evacuation models could help reduce the consequences related to a wide range of adverse events, such as fires, by indicating critical points on the evacuation paths. At the same time, simulation tools can be used for exploring how certain changes within the real system could affect the efficiency of evacuation and fire safety of the building even before they are implemented. The computer model for the Amphitheatres in FTS in Novi Sad has been created using simulation software – Pathfinder, based on SRPS TP 21. This paper presents contribution of evacuation software models to the quality of fire safety assessment.

scholarly journals Assessment of risks in the field of safety, quality and environment in post-harvest line

2016 ◽  
Vol 61 (Special Issue) ◽  
pp. S26-S36 ◽  
Author(s):  
M. Žitňák ◽  
K. Kollárová ◽  
M. Macák ◽  
M. Prístavková ◽  
M. Bošanský
Keyword(s):  
Failure Mode ◽  
Fire Safety ◽  
Occupational Safety ◽  
Fire Risk ◽  
Acceptable Level ◽  
Post Harvest ◽  
Before And After

The objective of this work is the evaluation of threats in the field of safety, fire safety, quality and environment in the post-harvest treatment of grain, with an emphasis put on pre-cleaning and drying of grain. The paper describes the technology of pre-cleaning and drying of grain. Risks for individual machines were evaluated using a failure mode and effects analysis (FMEA), which is used to evaluate the threats in terms of fire risk, occupational safety, the effect of machine on the quality of final product, and effect on the environment. We have proposed measures and solutions to eliminate or minimise the consequences of threats. Risk rates are evaluated before and after measures adopted. It can be stated based on the results that risk was successfully reduced to an acceptable level after adopting measures.

Zone Model Simulation of Fires in Chinese Restaurants in Hong Kong

1995 ◽  
Vol 13 (3) ◽  
pp. 235-253 ◽  
Author(s):  
W.K. Chow
Keyword(s):  
Hong Kong ◽  
Fire Safety ◽  
Model Simulation ◽  
Fire Risk ◽  
Zone Model ◽  
Gas Temperature ◽  
Fire Load ◽  
Fire Environment ◽  
Key Factor ◽  
Time Required

The fire risk in Chinese restaurants in Hong Kong is studied in this paper. The local regulation, the existing design for fire safety and the past fire record are discussed. Surveys on the fire load in fifteen Chinese restaurants of different sizes are made and reported. The fire equivalent duration period, which is related to the surveyed fire load density is calculated. Since smoke is a key factor in discussions of fire safety, the time required to fill the restaurants with smoke had to be calculated. In this case, fire models have to be used and the zone model CFAST developed at the Building and Fire Research Labora tory, NIST, U.S.A. is used to study the fire environment. Correlations are derived between the equivalent duration period and the predicted maximum hot gas temperature and the corresponding smoke layer interface height.

Microwaves: Application in Electron Microscopy

1990 ◽  
Vol 48 (3) ◽  
pp. 140-141
Author(s):  
Anthony S-Y Leong ◽  
David W Gove
Keyword(s):  
Electron Microscopy ◽  
Light Microscopy ◽  
Chemical Reactions ◽  
Electromagnetic Waves ◽  
Tissue Fixation ◽  
Primary Method ◽  
Dipolar Molecules ◽  
Wide Range ◽  
Time Required ◽  
Cryostat Sections

Microwaves (MW) are electromagnetic waves which are commonly generated at a frequency of 2.45 GHz. When dipolar molecules such as water, the polar side chains of proteins and other molecules with an uneven distribution of electrical charge are exposed to such non-ionizing radiation, they oscillate through 180° at a rate of 2,450 million cycles/s. This rapid kinetic movement results in accelerated chemical reactions and produces instantaneous heat. MWs have recently been applied to a wide range of procedures for light microscopy. MWs generated by domestic ovens have been used as a primary method of tissue fixation, it has been applied to the various stages of tissue processing as well as to a wide variety of staining procedures. This use of MWs has not only resulted in drastic reductions in the time required for tissue fixation, processing and staining, but have also produced better cytologic images in cryostat sections, and more importantly, have resulted in better preservation of cellular antigens.

COMBINATORIAL POLYNOMIALLY COMPUTABLE CHARACTERISTICS OF SUBSTITUTIONS AND THEIR PROPERTIES

2020 ◽  
Vol 7 (2) ◽  
pp. 34-41
Author(s):  
VLADIMIR NIKONOV ◽  
◽  
ANTON ZOBOV ◽  
Keyword(s):  
Mathematical Expectation ◽  
Point Of View ◽  
Small Range ◽  
Computational Point ◽  
Wide Range ◽  
Bijective Function ◽  
The Difference ◽  
Element Base ◽  
Selection Of

The construction and selection of a suitable bijective function, that is, substitution, is now becoming an important applied task, particularly for building block encryption systems. Many articles have suggested using different approaches to determining the quality of substitution, but most of them are highly computationally complex. The solution of this problem will significantly expand the range of methods for constructing and analyzing scheme in information protection systems. The purpose of research is to find easily measurable characteristics of substitutions, allowing to evaluate their quality, and also measures of the proximity of a particular substitutions to a random one, or its distance from it. For this purpose, several characteristics were proposed in this work: difference and polynomial, and their mathematical expectation was found, as well as variance for the difference characteristic. This allows us to make a conclusion about its quality by comparing the result of calculating the characteristic for a particular substitution with the calculated mathematical expectation. From a computational point of view, the thesises of the article are of exceptional interest due to the simplicity of the algorithm for quantifying the quality of bijective function substitutions. By its nature, the operation of calculating the difference characteristic carries out a simple summation of integer terms in a fixed and small range. Such an operation, both in the modern and in the prospective element base, is embedded in the logic of a wide range of functional elements, especially when implementing computational actions in the optical range, or on other carriers related to the field of nanotechnology.

TIME TO THE END OF PRIMARY CONSOLIDATION (EOP) OF SOFT CLAYEY SOILS: CONCERNING THE EFFECT OF ATTERBERG’S LIMIT AND CYCLIC LOADING HISTORY

2019 ◽  
Vol 128 (2B) ◽  
pp. 29-41
Author(s):  
Trần Thanh Nhàn
Keyword(s):  
Cyclic Loading ◽  
Pore Water ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Clayey Soils ◽  
Loading History ◽  
Cyclic Shear ◽  
Wide Range ◽  
Primary Consolidation ◽  
Time Required

In order to observe the end of primary consolidation (EOP) of cohesive soils with and without subjecting to cyclic loading, reconstituted specimens of clayey soils at various Atterberg’s limits were used for oedometer test at different loading increments and undrained cyclic shear test followed by drainage with various cyclic shear directions and a wide range of shear strain amplitudes. The pore water pressure and settlement of the soils were measured with time and the time to EOP was then determined by different methods. It is shown from observed results that the time to EOP determined by 3-t method agrees well with the time required for full dissipation of the pore water pressure and being considerably larger than those determined by Log Time method. These observations were then further evaluated in connection with effects of the Atterberg’s limit and the cyclic loading history.

A reflection of the polyethnic phenomenon in the Slovak novel of the 21 st century

2019 ◽  
pp. 462-471
Author(s):  
Lyudmila Shirokova
Keyword(s):  
Interpersonal Relations ◽  
Slovak Republic ◽  
Main Character ◽  
Jewish Family ◽  
Wide Range ◽  
Provincial Society ◽  
A Chain ◽  
Middle Generation ◽  
Artistic Quality

The historical polyethnicity of the Slovak society and the connected problems of the interrelations of cultures, ethics, interpersonal relations, are reflected in the works of modern Slovak prose. They are represented most clearly in the novels of middle generation writers P. Rankov, S. Lavrík, P. Krištúfek. They dwell upon the dramatical events of the 20 th century. They cover wide range problems, from the fruitful coexistence of various ethnic groups and their representatives to national contradictions and racial repressions. The artistic quality of the mentioned works, their composition, the way of narrating, the type of the main character, can be highly evaluated. For example, in a novel by P. Rankov the plot, in spite of its linearity, is a chain of episodes in the span of 30 years from the life of the main characters. It reflects not only their fates, but also the historical and political changes of the world they live in. The main female character of a S. Lavrík ’s novel narrates about everyday life and tragedies in the lives of the dwellers of a Slovak town in the Slovak Republic during the war. P. Krištúfek in his novel focuses on several decades from the life of a Slovak-Jewish family and dwellers of a Slovak provincial society with types and relations specific for this milieu.

Counterfeit Parts Recognition and Detection for Failure Analysts

2010 ◽  
Author(s):  
Katherine V. Whittington
Keyword(s):  
Thermal Cycle ◽  
Visual Inspection ◽  
Acoustic Microscopy ◽  
Scanning Acoustic Microscopy ◽  
3D Measurement ◽  
X Ray ◽  
Wide Range ◽  
Electronic Parts ◽  
Testing Awareness

Abstract The electronics supply chain is being increasingly infiltrated by non-authentic, counterfeit electronic parts, whose use poses a great risk to the integrity and quality of critical hardware. There is a wide range of counterfeit parts such as leads and body molds. The failure analyst has many tools that can be used to investigate counterfeit parts. The key is to follow an investigative path that makes sense for each scenario. External visual inspection is called for whenever the source of supply is questionable. Other methods include use of solvents, 3D measurement, X-ray fluorescence, C-mode scanning acoustic microscopy, thermal cycle testing, burn-in technique, and electrical testing. Awareness, vigilance, and effective investigations are the best defense against the threat of counterfeit parts.

THE VALUE OF LOVE IN THE SYSTEM OF FORMATION OF THE PROFESSIONAL MATURITY OF THE EDUCATOR

2020 ◽  
Vol 1 (10(79)) ◽  
pp. 12-18
Author(s):  
G. Bubyreva
Keyword(s):  
Russian Federation ◽  
The State ◽  
Educational Process ◽  
Wide Range ◽  
The Family ◽  
The Russian Federation ◽  
The Government ◽  
The Individual ◽  
The Right

The existing legislation determines the education as "an integral and focused process of teaching and upbringing, which represents a socially important value and shall be implemented so as to meet the interests of the individual, the family, the society and the state". However, even in this part, the meaning of the notion ‘socially significant benefit is not specified and allows for a wide range of interpretation [2]. Yet the more inconcrete is the answer to the question – "who and how should determine the interests of the individual, the family and even the state?" The national doctrine of education in the Russian Federation, which determined the goals of teaching and upbringing, the ways to attain them by means of the state policy regulating the field of education, the target achievements of the development of the educational system for the period up to 2025, approved by the Decree of the Government of the Russian Federation of October 4, 2000 #751, was abrogated by the Decree of the Government of the Russian Federation of March 29, 2014 #245 [7]. The new doctrine has not been developed so far. The RAE Academician A.B. Khutorsky believes that the absence of the national doctrine of education presents a threat to national security and a violation of the right of citizens to quality education. Accordingly, the teacher has to solve the problem of achieving the harmony of interests of the individual, the family, the society and the government on their own, which, however, judging by the officially published results, is the task that exceeds the abilities of the participants of the educational process.  The particular concern about the results of the patriotic upbringing served as a basis for the legislative initiative of the RF President V. V. Putin, who introduced the project of an amendment to the Law of RF "About Education of the Russian Federation" to the State Duma in 2020, regarding the quality of patriotic upbringing [3]. Patriotism, considered by the President of RF V. V. Putin as the only possible idea to unite the nation is "THE FEELING OF LOVE OF THE MOTHERLAND" and the readiness for every sacrifice and heroic deed for the sake of the interests of your Motherland. However, the practicing educators experience shortfalls in efficient methodologies of patriotic upbringing, which should let them bring up citizens, loving their Motherland more than themselves. The article is dedicated to solution to this problem based on the Value-sense paradigm of upbringing educational dynasty of the Kurbatovs [15].

Sign in / Sign up

Export Citation Format

Share Document