scholarly journals Effect of glass and carbon fibres on the compressive and flexural strength of the polymer concrete composite

2020 ◽  
Vol 15 (4) ◽  
pp. 441-452
Author(s):  
O. Petruska ◽  
J. Zajac ◽  
D. Duplakova ◽  
V. Simkulet ◽  
J. Duplak ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Literature Search ◽  
Maximum Load ◽  
Polymer Concrete ◽  
Fibre Reinforcement ◽  
Carbon Fibres ◽  
Building Element ◽  
Flexural Tensile Strength ◽  
Concrete Mixtures ◽  
Concrete Testing

This article is focused on testing the mechanical properties of polymer concrete testing samples. After a thorough literature search, the basic conditions of the research were determined and under the standards, three types of samples of special new concrete mixtures were created as a building element for special CNC machines. The samples were subjected to the research of the influence of used fillers, binders and additives on their properties. Testing was carried out in a certified laboratory and included checking the dimensions of the test bodies, weighing on the calibrated weight, determining the volumetric weight, determining the maximum load of the testing samples using special devices and then determining the compressive strength, or flexural tensile strength according to the relevant formulas. The final part of the testing also examined the morphology and mapping of the chemical composition with a focus on carbon, oxygen and aluminum using an electron microscope. The obtained results clearly show an increase in tensile and compressive strength using dispersed carbon fibre reinforcement of approximately 4 MPa. The conclusion of the article provides an overall summary of the results obtained and a summary of the features.

scholarly journals Reduction of cement content using graded aggregates in concrete production

2021 ◽  
Vol 7 (3) ◽  
pp. 125-135
Author(s):  
Benjamin Okwudili Mama ◽  
Chinedu Christian Asogwa ◽  
Boniface Obi Ugwuishiwu ◽  
Samson Nnaemeka Ugwu
Keyword(s):  
Compressive Strength ◽  
Cement Content ◽  
Concrete Mixtures ◽  
Concrete Properties ◽  
Splitting Test ◽  
Concrete Production ◽  
Concrete Mix ◽  
Different Shapes ◽  
Concrete Testing ◽  
Aggregate Shape

The aim of this project was to reduce cement content in concrete mixtures by changing the aggregate grading. For this purpose, concrete mixtures were made with aggregates having different shapes, textures, and grading. However, the workability of concrete mix depends on its paste volume, paste composition, and the type of aggregate used. Concrete testing was performed, and concrete properties including slump, compressive strength, and tensile splitting test were tested. The effect of aggregate shape on workability was evaluated by comparing one aggregate combination to another. It was found that the aggregate combination with S/A= 0.4 GR-B-CA+NA-A-FA had optimum workability properties and generally, GR-B-CA+NA-A-FA consistently had the highest workability, as well as the highest paste volume demand. This can be attributed to its poor grading as a result of the gaps in GR-B-CA content. Compared with NA-A-CA + NA-A-FA, it resulted in concrete mixtures with lower paste volume demand.

PENGKAJIAN KEKUATAN BETON STRUKTUR JEMBATAN PASCA KEBAKARAN

2013 ◽  
Vol 12 (3) ◽  
Author(s):  
Sudarmadi Sudarmadi
Keyword(s):  
Compressive Strength ◽  
Concrete Strength ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Pulse Velocity ◽  
Test Results ◽  
Concrete Compressive Strength ◽  
Strength Assessment ◽  
Concrete Testing

In this paper a case study about concrete strength assessment of bridge structure experiencing fire is discussed. Assessment methods include activities of visual inspection, concrete testing by Hammer Test, Ultrasonic Pulse Velocity Test, and Core Test. Then, test results are compared with the requirement of RSNI T-12-2004. Test results show that surface concrete at the location of fire deteriorates so that its quality is decreased into the category of Very Poor with ultrasonic pulse velocity ranges between 1,14 – 1,74 km/s. From test results also it can be known that concrete compressive strength of inner part of bridge pier ranges about 267 – 274 kg/cm2 and concrete compressive strength of beam and plate experiencing fire directly is about 173 kg/cm2 and 159 kg/cm2. It can be concluded that surface concrete strength at the location of fire does not meet the requirement of RSNI T-12-2004. So, repair on surface concrete of pier, beam, and plate at the location of fire is required.

scholarly journals The Effect of Recycled HDPE Plastic Additions on Concrete Performance

Recycling ◽  
2021 ◽  
Vol 6 (1) ◽  
pp. 18
Author(s):  
Tamrin ◽  
Juli Nurdiana
Keyword(s):  
Compressive Strength ◽  
High Density Polyethylene ◽  
Concrete Mixtures ◽  
Best Response ◽  
Structural Applications ◽  
Optimal Mix ◽  
Increased Strength ◽  
Selection Of ◽  
Recycled Hdpe ◽  
Lower Medium

This study examined HDPE (high-density polyethylene) plastic waste as an added material for concrete mixtures. The selection of HDPE was based on its increased strength, hardness, and resistance to high temperatures compared with other plastics. It focused on how HDPE plastic can be used as an additive in concrete to increase its tensile strength and compressive strength. 156 specimens were used to identify the effect of adding different percentages and sizes of HDPE lamellar particles to lower, medium, and higher strength concrete for non-structural applications. HDPE 0.5 mm thick lamellar particles with sizes of 10 × 10 mm, 5 × 20 mm, and 2.5 × 40 mm were added at 2.5%, 5%, 10%, and 20% by weight of cement. The results showed that the medium concrete class (with compressive strength equal to 10 MPa) had the best response to the addition of HDPE. The 5% HDPE addition represented the optimal mix for all concrete types, while the 5 × 20 mm size was best.

scholarly journals Material-removing machining wastes as a filler of a polymer concrete (industrial chips as a filler of a polymer concrete)

2021 ◽  
Vol 28 (1) ◽  
pp. 343-351
Author(s):  
Norbert Kępczak ◽  
Radosław Rosik ◽  
Mariusz Urbaniak
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Young’S Modulus ◽  
Industrial Waste ◽  
Splitting Tensile Strength ◽  
Polymer Concrete ◽  
Strength Parameters ◽  
Basic Parameters ◽  
Natural Fillers

Abstract The paper presents an impact of the addition of industrial machining chips on the mechanical properties of polymer concrete. As an additional filler, six types of industrial waste machining chips were used: steel fine chips, steel medium chips, steel thick chips, aluminium fine chips, aluminium medium chips, and titanium fine chips. During the research, the influence of the addition of chips on the basic parameters of mechanical properties, i.e., tensile strength, compressive strength, splitting tensile strength, and Young’s modulus, was analyzed. On the basis of the obtained results, conclusions were drawn that the addition of chips from machining causes a decrease in the value of the mechanical properties parameters of the polymer concrete even by 30%. The mechanism of cracking of samples, which were subjected to durability tests, was also explored. In addition, it was found that some chip waste can be used as a substitute for natural fillers during preparation of a mineral cast composition without losing much of the strength parameters.

Effects of Loading Percentage of Polyurethane in Lightweight Concrete

2013 ◽  
Vol 357-360 ◽  
pp. 1082-1085 ◽  
Author(s):  
Kamarul Aini Mohd Sari ◽  
Sohif Mat ◽  
Khairiah Haji Badri ◽  
Muhammad Fauzi Mohd Zain
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Lightweight Concrete ◽  
Palm Kernel ◽  
Physical And Mechanical Properties ◽  
Concrete Mixture ◽  
Experimental Program ◽  
Polymer Concrete ◽  
Optimum Level ◽  
Methylene Diphenyl Diisocyanate

An experimental program was performed to obtain the density, compressive strength, and thermal conductivity of palm-based lightweight concrete. Palm-based polyurethane (PU) particles were used as lightweight aggregates in creating concrete systems. Concrete systems contain palm kernel oil-based polyol (PKO-p) reacted with 2,4-methylene diphenyl diisocyanate (MDI). In this study, polymer concrete was improved to achieve the optimum level of PU with the lowest possible density. The PU particles in the concrete mixture comprised of 1% to 5% w/w with density of less than 1800 kg/m3. The PU particles were 5 mm in size. The ratio of PKO-p to MDI was set at 1:1 and the loading of the concrete mixture was set at 3% w/w to produce lightweight concrete. The resulting concrete has excellent compressive strength (17.5 MPa) and thermal conductivity (0.24 W/mK). Results show that the PU particle dosage has the most significant effect on the physical and mechanical properties of concrete.

scholarly journals Experimental Study on the Effect of Basalt Fiber and Sodium Alginate in Polymer Concrete Exposed to Elevated Temperature

Processes ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 510
Author(s):  
Seyed Esmaeil Mohammadyan-Yasouj ◽  
Hossein Abbastabar Ahangar ◽  
Narges Ahevani Oskoei ◽  
Hoofar Shokravi ◽  
Seyed Saeid Rahimian Koloor ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Vinyl Ester ◽  
Room Temperature ◽  
Elevated Temperatures ◽  
Basalt Fiber ◽  
Polymer Concrete ◽  
Strength Increase ◽  
Extensive Literature ◽  
Polymer Binders ◽  
Preliminary Phase

Polymer concrete contains aggregates and a polymeric binder such as epoxy, polyester, vinyl ester, or normal epoxy mixture. Since polymer binders in polymer concrete are made of organic materials, they have a very low heat and fire resistance compared to minerals. This paper investigates the effect of basalt fibers (BF) and alginate on the compressive strength of polymer concrete. An extensive literature review was completed, then two experimental phases including the preliminary phase to set the appropriate mix design, and the main phase to investigate the compressive strength of samples after exposure to elevated temperatures of 100 °C, 150 °C, and 180 °C were conducted. The addition of BF and/or alginate decreases concrete compressive strength under room temperature, but the addition of BF and alginate each alone leads to compressive strength increase during exposure to heat and increase in the temperature to 180 °C showed almost positive on the compressive strength. The addition of BF and alginate both together increases the rate of strength growth of polymer concrete under heat from 100 °C to 180 °C. In conclusion, BF and alginate decrease the compressive strength of polymer concretes under room temperature, but they improve the resistance against raised temperatures.

Effect of Cyclic Exposure of Chemicals on Compressive Strength of Polyester Resin Based Polymer Concrete

2013 ◽  
Vol 687 ◽  
pp. 185-190 ◽  
Author(s):  
Masoud Jamshidi ◽  
Mohammad Javad Ghasemi ◽  
Abdolreza Hashemi
Keyword(s):  
Compressive Strength ◽  
Construction Industry ◽  
Polyester Resin ◽  
Unsaturated Polyester ◽  
Concrete Structures ◽  
Polymer Concrete ◽  
Acid Solutions ◽  
Gas Oil ◽  
Demineralized Water ◽  
Concrete Production

Polymer concretes (PC) were introduced to building and construction industry more than 50 years ago. Gradually, they became a suitable substitute for concrete structures. Their superior properties againt aggresives introduced them as a good overlay for concrete structures; however, their application was shortly diminished due to the higher costs. In this research a homemade cost-quality effective resin (unsaturated polyester) is used as binder in the polymer concrete production. Polymer concrete specimens were evaluated for compressive strength and its fluctuation due to cyclic exposure to different aggresive solutions (sulfuric acid, nitric acid, citric acid, chloridric acid, sodum sulfate, water, demineralized water, sodium hydroxid, potasium hydroxid and gas oil). It was found that PC specimens degraded more in alkali conditioned in comparison to acid solutions.

scholarly journals Examining Polyethylene Terephthalate (PET) as Artificial Coarse Aggregates in Concrete

2020 ◽  
Vol 6 (12) ◽  
pp. 2416-2424
Author(s):  
Erniati Bachtiar ◽  
Mustaan Mustaan ◽  
Faris Jumawan ◽  
Meldawati Artayani ◽  
Tahang Tahang ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Polyethylene Terephthalate ◽  
Coarse Aggregate ◽  
Fresh Concrete ◽  
Coarse Aggregates ◽  
Volume Weight ◽  
Concrete Mixtures ◽  
Strength Tests ◽  
Recycled Polyethylene

This study aims to examine the effect of recycled Polyethylene Terephthalate (PET) artificial aggregate as a substitute for coarse aggregate on the compressive strength and flexural strength, and the volume weight of the concrete. PET plastic waste is recycled by heating to a boiling point of approximately 300°C. There are five variations of concrete mixtures, defined the percentage of PET artificial aggregate to the total coarse aggregate, by 0, 25, 50, 75 and 100%. Tests carried out on fresh concrete mixtures are slump, bleeding, and segregation tests. Compressive and flexural strength tests proceeded based on ASTM 39/C39M-99 and ASTM C293-79 standards at the age of 28 days. The results showed that the use of PET artificial aggregate could improve the workability of the concrete mixture. The effect of PET artificial aggregate as a substitute for coarse aggregate on the compressive and flexural strength of concrete is considered very significant. The higher the percentage of PET plastic artificial aggregate, the lower the compressive and flexural strength, and the volume weight, of the concrete. Substitution of 25, 50, 75 and 100% of PET artificial aggregate gave decreases in compressive strength of 30.06, 32.39, 41.73 and 44.06% of the compressive strength of the standard concrete (18.20 MPa), respectively. The reductions in flexural strength were by respectively 19.03, 54.50, 53.95 and 61.00% of the standard concrete's flexural strength (3.59 MPa). The reductions in volume weight of concrete were by respectively 8.45, 17.71, 25.07 and 34.60% of the weight of the standard concrete volume of 2335.4 kg/m3 Doi: 10.28991/cej-2020-03091626 Full Text: PDF

scholarly journals Effect of Na2SiO3/Naoh on the Compressive Strength of Inorganic Polymer Concrete Mixed with Ground Granulated Blast Furnace Slag (GGBS) At Ambient Condition

2019 ◽  
Vol 9 (2) ◽  
pp. 1222-1228
Keyword(s):  
Compressive Strength ◽  
Blast Furnace ◽  
Blast Furnace Slag ◽  
Ambient Condition ◽  
Polymer Concrete ◽  
Geopolymer Concrete ◽  
Split Tensile Strength ◽  
Standard Size ◽  
Granulated Blast Furnace Slag ◽  
Furnace Slag

This paper aims to investigate the influence of alkaline activators solution i.e, Na2SiO3 / NaOH on compressive strength of geopolymer concrete mixed with Ground Granulated Blast furnace slag (GGBS) for constant molarity 8 M. The ratio of alkali to binder ratio is taken as 0.5 and the ratio of Na2SiO3 / NaOH is 2.5. The geopolymer mix is based on pervious sutdies. As per Indian standard size moulds for the cube, cylinder and prism are cast, cured and tested.The specimens were tested for fresh concrete properties such as slump cone test and hardened properties such as compressive strength for cubes, split tensile strength for cylinders and flexural strength for prism different days of curing under ambient temperature. Also, a microstructural study is done by using Scanning electron microscopy (SEM), Energy dispersive X-ray (EDX) for the tested sample. It is found from the test results that, with the aid of alumino-silicate solution, early strength is achieved by geopolymer concrete within 7 days under ambient condition due to the presence of ground granulated slag.

Sign in / Sign up

Export Citation Format

Share Document