scholarly journals Drenovac: a Neolithic settlement in the Middle Morava Valley, Serbia

Antiquity ◽  
2017 ◽  
Vol 91 (357) ◽  
Author(s):  
Slaviša Perić
Keyword(s):  
Large Scale ◽  
New Technologies ◽  
Social Organisation ◽  
Formation Processes ◽  
Early Neolithic ◽  
Late Neolithic ◽  
Geomagnetic Survey

The Late Neolithic houses excavated at Drenovac, Serbia, rank amongst the best-preserved in Europe. In particular, the preservation of collapsed second-storey floors offers unique insights into household and social organisation. The site of Slatina-Turska česma, Drenovac, is located in the Middle Morava Valley of central Serbia (Figure 1). It is a deeply stratified site, with cultural deposits up to 6.5m thick, that spans two main periods of occupation (separated by a hiatus of approximately 700 years): the Early Neolithic Starčevo Culture (6100–5900 BC) and the Late Neolithic Vinča Culture (5300–4700/4500 BC). The site was first recorded in 1966, and the first large-scale excavations undertaken between 1968 and 1971 (Vetnić 1974: 125–39; Perić 2004). In 2004, the Archaeological Institute in Belgrade conducted further excavations to improve understanding of the site's chronology, stratigraphy, formation processes and occupation dynamics (Perić 2009; Perić & Perić 2014). Geomagnetic surveys were carried out in parallel with further excavations undertaken between 2008 and 2011 in cooperation with the Romano–Germanic Commission of the German Archaeological Institute (Perićet al. 2016) and, between 2012 and 2013, with the Viminacium Centre for New Technologies. An extensive geomagnetic survey here offers extraordinary insights into the layout and extent of the Late Neolithic settlement, and has enabled targeted excavations (Figure 1).

Social organization in the Orcadian Neolithic: identification of elite domestic structures and settlements through analysis of excavation data

2018 ◽  
Vol 40 (1) ◽  
pp. 25-53 ◽  
Author(s):  
David MacInnes
Keyword(s):  
Social Organization ◽  
Qualitative Data ◽  
Social Hierarchy ◽  
Published Data ◽  
Early Neolithic ◽  
Late Neolithic ◽  
New Approach ◽  
Qualitative Evidence ◽  
Methods Of Analysis ◽  
The Subject

The nature of social organization during the Orcadian Neolithic has been the subject of discussion for several decades with much of the debate focused on answering an insightful question posed by Colin Renfrew in 1979. He asked, how was society organised to construct the larger, innovative monuments of the Orcadian Late Neolithic that were centralised in the western Mainland? There are many possible answers to the question but little evidence pointing to a probable solution, so the discussion has continued for many years. This paper takes a new approach by asking a different question: what can be learned about Orcadian Neolithic social organization from the quantitative and qualitative evidence accumulating from excavated domestic structures and settlements?In an attempt to answer this question, quantitative and qualitative data about domestic structures and about settlements was collected from published reports on 15 Orcadian Neolithic excavated sites. The published data is less extensive than hoped but is sufficient to support a provisional answer: a social hierarchy probably did not develop in the Early Neolithic but almost certainly did in the Late Neolithic, for which the data is more comprehensive.While this is only one approach of several possible ways to consider the question, it is by exploring different methods of analysis and comparing them that an understanding of the Orcadian Neolithic can move forward.

Financial and Economic Support of Innovation Processes in the Russian Fuel and Energy Complex

2019 ◽  
Vol 12 (3) ◽  
pp. 77-85
Author(s):  
L. D. Kapranova ◽  
T. V. Pogodina
Keyword(s):  
Oil Recovery ◽  
Large Scale ◽  
Oil And Gas ◽  
New Technologies ◽  
Innovative Development ◽  
Oil Reserves ◽  
Energy Complex ◽  
Innovation Activities ◽  
Substantial Investment ◽  
The Government

The subject of the research is the current state of the fuel and energy complex (FEC) that ensures generation of a significant part of the budget and the innovative development of the economy.The purpose of the research was to establish priority directions for the development of the FEC sectors based on a comprehensive analysis of their innovative and investment activities. The dynamics of investment in the fuel and energy sector are considered. It is noted that large-scale modernization of the fuel and energy complex requires substantial investment and support from the government. The results of the government programs of corporate innovative development are analyzed. The results of the research identified innovative development priorities in the power, oil, gas and coal sectors of the fuel and energy complex. The most promising areas of innovative development in the oil and gas sector are the technologies of enhanced oil recovery; the development of hard-to-recover oil reserves; the production of liquefied natural gas and its transportation. In the power sector, the prospective areas are activities aimed at improving the performance reliability of the national energy systems and the introduction of digital technologies. Based on the research findings, it is concluded that the innovation activities in the fuel and energy complex primarily include the development of new technologies, modernization of the FEC technical base; adoption of state-of-the-art methods of coal mining and oil recovery; creating favorable economic conditions for industrial extraction of hard-to-recover reserves; transition to carbon-free fuel sources and energy carriers that can reduce energy consumption and cost as well as reducing the negative FEC impact on the environment.

The sugar and alcohol industry in the biofuels and cogeneration era: a paradigm change (part II)

2014 ◽  
pp. 97-104 ◽  
Author(s):  
Electo Eduardo Silv Lora ◽  
Mateus Henrique Rocha ◽  
José Carlos Escobar Palacio ◽  
Osvaldo José Venturini ◽  
Maria Luiza Grillo Renó ◽  
...  
Keyword(s):  
Large Scale ◽  
New Technologies ◽  
Process Integration ◽  
Animal Feed ◽  
Raw Materials ◽  
Biofuel Production ◽  
New Paradigm ◽  
Alcohol Industry ◽  
Feed Production ◽  
Steam Parameters

The aim of this paper is to discuss the major technological changes related to the implementation of large-scale cogeneration and biofuel production in the sugar and alcohol industry. The reduction of the process steam consumption, implementation of new alternatives in driving mills, the widespread practice of high steam parameters use in cogeneration facilities, the insertion of new technologies for biofuels production (hydrolysis and gasification), the energy conversion of sugarcane trash and vinasse, animal feed production, process integration and implementation of the biorefinery concept are considered. Another new paradigm consists in the wide spreading of sustainability studies of products and processes using the Life Cycle Assessment (LCA) and the implementation of sustainability indexes. Every approach to this issue has as an objective to increase the economic efficiency and the possibilities of the sugarcane as a main source of two basic raw materials: fibres and sugar. The paper briefly presents the concepts, indicators, state-of-the-art and perspectives of each of the referred issues.

scholarly journals mRNA-Based Vaccines

Vaccines ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 390
Author(s):  
Frank Kowalzik ◽  
Daniel Schreiner ◽  
Christian Jensen ◽  
Daniel Teschner ◽  
Stephan Gehring ◽  
...  
Keyword(s):  
Large Scale ◽  
New Technologies ◽  
Vaccine Development ◽  
Effective Means ◽  
Cost Effective ◽  
Clinical Applications ◽  
Cell Mediated Immunity ◽  
Healthy Individuals ◽  
Emerging Pathogens ◽  
Cell Genome

Increases in the world’s population and population density promote the spread of emerging pathogens. Vaccines are the most cost-effective means of preventing this spread. Traditional methods used to identify and produce new vaccines are not adequate, in most instances, to ensure global protection. New technologies are urgently needed to expedite large scale vaccine development. mRNA-based vaccines promise to meet this need. mRNA-based vaccines exhibit a number of potential advantages relative to conventional vaccines, namely they (1) involve neither infectious elements nor a risk of stable integration into the host cell genome; (2) generate humoral and cell-mediated immunity; (3) are well-tolerated by healthy individuals; and (4) are less expensive and produced more rapidly by processes that are readily standardized and scaled-up, improving responsiveness to large emerging outbreaks. Multiple mRNA vaccine platforms have demonstrated efficacy in preventing infectious diseases and treating several types of cancers in humans as well as animal models. This review describes the factors that contribute to maximizing the production of effective mRNA vaccine transcripts and delivery systems, and the clinical applications are discussed in detail.

scholarly journals Beyond Newgrange: Brú na Bóinne in the later Neolithic

2021 ◽  
pp. 1-30
Author(s):  
Stephen Davis ◽  
Knut Rassmann
Keyword(s):  
Large Scale ◽  
Morphological Characteristics ◽  
World Heritage ◽  
Geophysical Survey ◽  
World Heritage Site ◽  
Late Neolithic ◽  
Non Invasive ◽  
Heritage Site ◽  
New Evidence

The Brú na Bóinne World Heritage Site, Ireland is best known for its megalithic monuments, in particular the great developed passage tombs of Knowth, Dowth, and Newgrange, and its abundance of megalithic art. However, our understanding of the wider Brú na Bóinne landscape has changed beyond all recognition in the last decade owing to the application of modern, non-invasive survey technologies – in particular LiDAR and large-scale geophysical survey – and most recently as a result of the hot, dry summer of 2018 which revealed a series of remarkable cropmarks between Newgrange and the River Boyne. Despite a lack of excavation it can be argued, based on their morphological characteristics, that many of the structures revealed belong within the corpus of late Neolithic ritual/ceremonial structures, including earthen henges, square-in-circle monuments, palisaded enclosures, and pit/post-alignments. These display both extraordinary diversity, yet also commonality of design and architecture, both as a group and with the passage tombs that preceded them. This paper provides an up-to-date survey of the late Neolithic and presumed late Neolithic landscape of Brú na Bóinne. It provides new evidence and new insights from ongoing survey campaigns, suggesting parallels within the British Neolithic but also insular development within some monument classes.

scholarly journals Hydropower, Geothermal, and Ocean Energy

MRS Bulletin ◽  
2008 ◽  
Vol 33 (4) ◽  
pp. 389-395 ◽  
Author(s):  
Ralph E.H. Sims
Keyword(s):  
Renewable Energy ◽  
Large Scale ◽  
New Technologies ◽  
Materials Science ◽  
Development Stage ◽  
Design Development ◽  
Ocean Energy ◽  
Improve Design ◽  
And Performance ◽  
Improve Reliability

AbstractSome forms of renewable energy have long contributed to electricity generation, whereas others are just emerging. For example, large-scale hydropower is a mature technology generating about 16% of global electricity, and many smaller scale systems are also being installed worldwide. Future opportunities to improve the technology are limited but include upgrading of existing plants to gain greater performance efficiencies and reduced maintenance. Geothermal energy, widely used for power generation and direct heat applications, is also mature, but new technologies could improve plant designs, extend their lifetimes, and improve reliability. By contrast, ocean energy is an emerging renewable energy technology. Design, development, and testing of a myriad of devices remain mainly in the research and development stage, with many opportunities for materials science to improve design and performance, reduce costly maintenance procedures, and extend plant operating lifetimes under the harsh marine environment.

scholarly journals Genome diversity in the Neolithic Globular Amphorae culture and the spread of Indo-European languages

2017 ◽  
Vol 284 (1867) ◽  
pp. 20171540 ◽  
Author(s):  
Francesca Tassi ◽  
Stefania Vai ◽  
Silvia Ghirotto ◽  
Martina Lari ◽  
Alessandra Modi ◽  
...  
Keyword(s):  
Approximate Bayesian Computation ◽  
Cultural Influences ◽  
Archaeological Record ◽  
Genome Diversity ◽  
Early Neolithic ◽  
Late Neolithic ◽  
Demographic Models ◽  
European Languages ◽  
Complete Sequences ◽  
Approximate Bayesian

It is unclear whether Indo-European languages in Europe spread from the Pontic steppes in the late Neolithic, or from Anatolia in the Early Neolithic. Under the former hypothesis, people of the Globular Amphorae culture (GAC) would be descended from Eastern ancestors, likely representing the Yamnaya culture. However, nuclear (six individuals typed for 597 573 SNPs) and mitochondrial (11 complete sequences) DNA from the GAC appear closer to those of earlier Neolithic groups than to the DNA of all other populations related to the Pontic steppe migration. Explicit comparisons of alternative demographic models via approximate Bayesian computation confirmed this pattern. These results are not in contrast to Late Neolithic gene flow from the Pontic steppes into Central Europe. However, they add nuance to this model, showing that the eastern affinities of the GAC in the archaeological record reflect cultural influences from other groups from the East, rather than the movement of people.

Research on the Key Technologies for New Large Dual-Platen High-Precision Clamping System

2010 ◽  
Vol 97-101 ◽  
pp. 64-68
Author(s):  
Jian Chen ◽  
Jin Wang ◽  
Guo Dong Lu ◽  
Zheng Qi Ling
Keyword(s):  
High Precision ◽  
Large Scale ◽  
New Technologies ◽  
Impact Factors ◽  
Adaptive Correction ◽  
Hydraulic Servo ◽  
New Type ◽  
Clamping System ◽  
Plastic Parts ◽  
First Time

High- precision and large scale are the developing trend for injection molding machine clamping system .This paper compared the characteristics of three-platen toggle and dual-platen hydraulic clamping system. The key impact factors that effecting plastic parts` precision from clamping system were discussed systematically first time. Based on these analyses, a new clamping system has been proposed and manufactured to improve the plastics parts` precision, including three new technologies: new type dual-platen structure, parallelism adaptive correction technology and numerical controlled hydraulic servo system technology. It has been applied in practical machine successfully, and experiment result proves that it is effective enough to satisfying the high-precision molding of large plastics parts.

scholarly journals Planting Systems for Modern Olive Growing: Strengths and Weaknesses

Agriculture ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 494
Author(s):  
Riccardo Lo Bianco ◽  
Primo Proietti ◽  
Luca Regni ◽  
Tiziano Caruso
Keyword(s):  
Large Scale ◽  
New Technologies ◽  
Production Costs ◽  
Biotic And Abiotic Stress ◽  
Short Term ◽  
Mediterranean Countries ◽  
Social Concerns ◽  
The World ◽  
Fruit Growing ◽  
Cultivar Diversity

The objective of fully mechanizing olive harvesting has been pursued since the 1970s to cope with labor shortages and increasing production costs. Only in the last twenty years, after adopting super-intensive planting systems and developing appropriate straddle machines, a solution seems to have been found. The spread of super-intensive plantings, however, raises serious environmental and social concerns, mainly because of the small number of cultivars that are currently used (basically 2), compared to over 100 cultivars today cultivated on a large scale across the world. Olive growing, indeed, insists on over 11 million hectares. Despite its being located mostly in the Mediterranean countries, the numerous olive growing districts are characterized by deep differences in climate and soil and in the frequency and nature of environmental stress. To date, the olive has coped with biotic and abiotic stress thanks to the great cultivar diversity. Pending that new technologies supporting plant breeding will provide a wider number of cultivars suitable for super-intensive systems, in the short term, new growing models must be developed. New olive orchards will need to exploit cultivars currently present in various olive-growing areas and favor increasing productions that are environmentally, socially, and economically sustainable. As in fruit growing, we should focus on “pedestrian olive orchards”, based on trees with small canopies and whose top can be easily reached by people from the ground and by machines (from the side of the top) that can carry out, in a targeted way, pesticide treatments, pruning and harvesting.

scholarly journals Obsidian from the Neolithic Layers of “Grotta di San Michele Arcangelo di Saracena” (Cosenza), Italy. A Preliminary Report

2021 ◽  
Vol 7 (1) ◽  
pp. 615-630
Author(s):  
Vincenza Forgia ◽  
Robert H. Tykot ◽  
Andrea Vianello ◽  
Elena Natali
Keyword(s):  
Preliminary Report ◽  
Second Phase ◽  
Early Neolithic ◽  
Late Neolithic ◽  
Resources Management ◽  
Lithic Assemblage ◽  
Wear Analysis ◽  
Selection Of ◽  
Preliminary Selection

Abstract The paper presents the results obtained by techno-typological analysis of a lithic assemblage from the Neolithic layers of Grotta San Michele Arcangelo di Saracena (Cosenza) together with the results of micro-wear analysis obtained from a preliminary selection of obsidian artifacts with different provenances distinguished by pXRF analysis. The site provides one of the best preserved Neolithic sequences in the area, from the earliest Impressed Wares (or Impresse Arcaiche) (early sixth millennium BC) to the Spatarella pottery style (end fifth – early fourth millennium BC). Along the Neolithic sequence, it is possible to observe some major changes within lithic resources management. In particular, it is possible to notice some techno-typological breakages between the Early Neolithic and the further stages, until the second phase of the Late Neolithic, when another rupture, corresponding to the Spatarella facies, is evident.

Sign in / Sign up

Export Citation Format

Share Document