scholarly journals Heating and emission properties of waste biomass in burner furnace

2017 ◽  
Vol 63 (No. 1) ◽  
pp. 16-22
Author(s):  
Malaťák Jan ◽  
Bradna Jiří
Keyword(s):  
Combustion Process ◽  
Calorific Value ◽  
Ash Content ◽  
Waste Biomass ◽  
Reed Canary Grass ◽  
High Concentration ◽  
Harmful Emission ◽  
Advanced Combustion ◽  
Canary Grass ◽  
Very High

Utilization of waste suitable as a fuel for small combustion devices is a very important issue. Therefore, this article analyzes selected waste materials from agriculture and maintenance of municipal vegetation. The pellet samples from composting had very high ash content (22.39 and 36.85% wt.), which resulted in low values of net calorific value (12.66 and 10.24 MJ/kg), <br /> but also in bad properties of these samples in high concentration of harmful emission. Other problematic fuel samples were pellets from maintenance of city vegetation and reed canary grass, for which high concentration of carbon monoxide was measured during combustion process. The device used for these experiments is based on burner furnace. Combustion conditions could be improved by more uniform fuel supply to the burner and better control of combustion air. Boiler with advanced combustion control can reach better results during combustion process. Results in this article are valid for tested materials combusted in simple pellet burner with limited ability to control combustion process.

scholarly journals Energy Evaluation and Greenhouse Gas Emissions of Reed Plant Pelletizing and Utilization as Solid Biofuel

Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1516 ◽  
Author(s):  
Algirdas Jasinskas ◽  
Dionizas Streikus ◽  
Egidijus Šarauskis ◽  
Mečys Palšauskas ◽  
Kęstutis Venslauskas
Keyword(s):  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Calorific Value ◽  
Ash Content ◽  
Reed Canary Grass ◽  
Gas Emissions ◽  
Energy Evaluation ◽  
Solid Biofuel ◽  
Ash Melting ◽  
Canary Grass

This paper presents the results of research on the preparation and use for energy purposes of three reed herbaceous energy plants: reed (Phragmites australis) and bulrush (Typha); both grown in local vicinities on lakes and riverbanks and reed canary grass (Phalaris arundinacea L.). The physical-mechanical characteristics (density, moisture, and ash content) of chopped and milled reeds were investigated. The investigation of mill fractional compositions determined the largest amount of mill—reed mill, collected on the sieves of 0.63 mm (40.0%). The pellet moisture ranged from 10.79% to 6.32%, while the density was 1178.9 kg m−3 for dry matter (DM) of reed. The ash content of reed, bulrush and reed canary grass pellets was 3.17%, 5.88%, and 7.99%, respectively. The ash melting temperature ranged from 865 to 1411 °C; these temperatures were high enough for ash melting. The determined pellet calorific value varied from 17.4 to 17.9 MJ kg−1 DM. The disintegration force, indicating pellet strength, ranged from 324.25 N for reed canary grass to 549.24 N for reed. The determined emissions of harmful pollutants—CO2, CO, NOx, and unburnt hydrocarbons (CxHy)—did not exceed the maximum permissible levels. The assessment of greenhouse gas emissions (GHG) from technology showed that the CO2 equivalents ranged from 7.3 to 10.1 kg CO2-eq. GJ−1 for reed and reed canary grass, respectively.

scholarly journals Analysis of the efficiency of a solid fuel boiler depending on the choice of combusted fuel

2020 ◽  
Vol 154 ◽  
pp. 02003
Author(s):  
Grzegorz Pełka ◽  
Wojciech Luboń ◽  
Przemysław Pachytel
Keyword(s):  
Energy Efficiency ◽  
Solid Fuel ◽  
Combustion Process ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Solid Fuels ◽  
The Real ◽  
Residential Sector

In the municipal and residential sector in Poland, as many as 50% of households are heated by solid fuel boilers. Most often these are, unfortunately, inefficient boilers, fired with low-quality coal. This study characterizes the market of boilers for solid fuels in Poland, and also presents the main apportionment of these devices, due to the different criteria that characterize them. The current legal changes in the scope of energy and emission requirements for solid fuel boilers are also discussed. The main purpose of this work is to analyze the real efficiency of the solid fuel over-fired boiler used, depending on the fuel burned in it. The process of burning selected fuels (seasoned wood, coal and pea coal) in the boiler was preceded by tests of these fuels to determine their energy parameters, such as moisture, ash content, the share of volatile matter and calorific value. In the next step, the energy efficiency obtained by the tested solid fuel boiler during the combustion of selected solid fuels was compared. The highest efficiency was achieved during the combustion of pea coal, and the lowest was achieved during the combustion of wood. In any case, the nominal efficiency value was achieved. Solutions that could improve the quality of the combustion process in this type of boiler were proposed.

scholarly journals High-Energy Solid Fuel Obtained from Carbonized Rice Starch

Energies ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 4096
Author(s):  
Beata Kurc ◽  
Piotr Lijewski ◽  
Łukasz Rymaniak ◽  
Paweł Fuć ◽  
Marita Pigłowska ◽  
...  
Keyword(s):  
Solid Fuel ◽  
Calorific Value ◽  
High Energy ◽  
Nitrogen Atmosphere ◽  
Rice Starch ◽  
Hard Coal ◽  
High Concentration ◽  
Combustion Heat ◽  
Technical Parameters ◽  
Very High

The paper describes the investigations of the physicochemical properties of biocoal, a solid fuel obtained following the carbonization of rice starch. The production of biocoal (carbonization) was completed at the temperature of 600 °C in the nitrogen atmosphere. As a result of the carbonization, amorphous carbon with high monodispersity was obtained, devoided of oxygen elements and was a very well developed BET specific surface—360 m2 g−1. The investigations of the technical parameters have confirmed a very high concentration of energy. The calorific value of 53.21 MJ kg−1 and the combustion heat of 54.92 MJ kg−1 are significantly higher than those of starch before carbonization (18.72 MJ kg−1 and 19.43 MJ kg−1, respectively) and these values for typical biomass fuels. These values are also greater than those of hard coal. Other advantageous features of the obtained fuel are low ash (0.84%) and moisture content. These features predispose this fuel for the application as an alternative to conventional fuels.

scholarly journals THE EFFECT OF BINDER RATIO ON THE PHYSICAL AND COMBUSTION CHARACTERISTICS OF CARBONIZED RICE STALK BRIQUETTES

2020 ◽  
pp. 221-229
Author(s):  
Rapheal Ige ◽  
Elinge Ogala ◽  
Cosmos Moki ◽  
Abdulrahman Habeeb
Keyword(s):  
Moisture Content ◽  
Carbon Content ◽  
Calorific Value ◽  
Volatile Matter ◽  
Ash Content ◽  
Hot Water ◽  
High Concentration ◽  
Fixed Carbon ◽  
Binder Ratio ◽  
Fixed Carbon Content

The selection or choice of agro-waste briquettes for domestic and industrial cottage applications depends on the fuel properties. In this study, the briquette was produced by carbonizing the rice stalk followed by crushing and sieving, the binder was prepared by dissolving the starch in hot water, then mixed with the sieved carbonized rice stalk and then the briquette was produced using the briquetting machine. Proximate analyses, viability, characteristics and combustion were determined to know the average composition of their constituents. From the results obtained it was observed that ash content, moisture content, after glow and ignition propagation decrease as the binder ratio increase while fixed carbon content, volatile matter, calorific value, density and compressive strength increase. The results of this work indicate that briquettes produced using high concentration of the binder would make good biomass fuels. However, it has a high moisture content of 25.00%, high ash content of 23.00%, moderate volatile matter of 44.80%, low fixed carbon content of 32.20%, moderate calorific value of 13.86 MJ/Kg and high density of 0.643g/cm3. The results obtained for all the parameters showed that rice stalks briquettes produced with high concentration of the binder (starch) had a better performance based on their combustion profile.

scholarly journals Assessment of the Composition of Forest Waste in Terms of Its Further Use

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 973
Author(s):  
Marta Bożym ◽  
Arkadiusz Gendek ◽  
Grzegorz Siemiątkowski ◽  
Monika Aniszewska ◽  
Jan Malaťák
Keyword(s):  
Heavy Metals ◽  
Alkali Metals ◽  
Energy Use ◽  
Heavy Metal Contamination ◽  
Combustion Process ◽  
Calorific Value ◽  
Ash Content ◽  
Pollutant Emissions ◽  
Forest Residues ◽  
Logging Residues

This paper presents the results of the analysis of the chemical composition and content of heavy metal contamination in forest logging residues, in order to assess the possibility for their further utilisation. The samples were divided into 9 groups, which included coniferous tree cones, wood, and other multi-species logging residues. The elementary composition, ash content, and calorific value were determined as energy use indicators for the samples. Additionally, the content of heavy and alkali metals, which may affect combustion processes and pollutant emissions, was tested. The high content of heavy metals may also disqualify these residues for other uses. The research shows that the test residues are suitable for energy use due to their high calorific value and low content of heavy metals. However, an increased ash content in some samples and the presence of alkali metals, causing high-temperature corrosion of boilers, may disqualify them as a potential fuel in the combustion process. The forest residues may be used in other thermal processes such as pyrolysis or gasification. A low content of heavy metals and a high content of organic matter permit the use of these residues for the production of adsorbents or composite materials.

scholarly journals The Study of the Faba Bean Waste and Potato Peels Recycling for Pellet Production and Usage for Energy Conversion

Energies ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2954
Author(s):  
Aleksandra Minajeva ◽  
Algirdas Jasinskas ◽  
Rolandas Domeika ◽  
Edvardas Vaiciukevičius ◽  
Egidijus Lemanas ◽  
...  
Keyword(s):  
Faba Bean ◽  
Combustion Process ◽  
Calorific Value ◽  
Ash Content ◽  
Potato Peel ◽  
Fuel Pellets ◽  
Efficient Combustion ◽  
Specific Emissions ◽  
Potato Peels ◽  
Physical And Mechanical Characteristics

The article presents the results of a study on the preparation and use of faba bean waste and potato peel pellets for energy purposes. Physical and mechanical characteristics (moisture, density, ash content) of faba bean waste and potato peel pellets were investigated. The largest fraction of flour was formed on a sieve with 1 mm holes: faba bean waste—28.2 ± 2.02 g, potato peels—29.09 ± 0.73 g. For this experiment, samples were taken by mixing faba bean waste (four variants) and potato peel in the ratio of 1:1; 1:2; 1:3; 1:4 by volume (12 samples). It was found in this study that the density of pellets (DM) ranged from 1226.22 ± 13.88 kgm−3 to 1349.79 ± 6.79 kgm−3. The pellet moisture ranged from 6.70 ± 0.04% to 3.64 ± 0.13%. The lower calorific value of dry fuel pellets ranged from 15.27 ± 0.43 MJkg−1 to 16.02 ± 0.50 MJkg−1. The ash content of the pellets ranged from 8.05 ± 0.57% to 14.21 ± 0.05%. The ST temperature of the experimentally measured mixture of faba bean waste and potato peel pellets ranged from 924 to 969 °C; the DT temperature ranged from 944 to 983 °C; the HT temperature ranged from 1073 to 1202 °C, and a change in FT temperature from 1174 to 1234 °C was observed. The temperatures were sufficiently high to melt the ash. Specific emissions of CO2, CO, NOx and CxHy did not exceed the maximum levels allowed. In summary, from the results of the study of the physical properties, combustion, and emissions of waste beans and potato peel pellets (all samples), it is evident that they are used for biofuels. The combustion process of this type of pellet is characterized by efficient combustion and minimal emissions to the atmosphere.

scholarly journals The Influence of Lime Material and Nitrogen Fertilization on Reed Canary Grass Productivity, Plant Quality and Environmental Impact of Using Biomass for Energy Purposes

Agronomy ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 895
Author(s):  
Gintaras Šiaudinis ◽  
Algirdas Jasinskas ◽  
Egidijus Šarauskis ◽  
Regina Skuodienė ◽  
Regina Repšienė ◽  
...  
Keyword(s):  
Nitrogen Fertilization ◽  
Calorific Value ◽  
Biomass Productivity ◽  
Fertilization Rate ◽  
N Fertilization ◽  
Utilization Efficiency ◽  
Nitrogen Fertilizers ◽  
Reed Canary Grass ◽  
Canary Grass ◽  
The Impact

A field experiment with reed canary grass (Phalaris arundinacea L.) was carried out at LAMMC Vėžaičiai Branch (Western Lithuania) in 2010–2016 with the aim to evaluate the impact of liming and nitrogen on grass productivity, biomass chemical content and energetic parameters of the pellets. The site soil is the natural acidic loam Retisol (pH 4.2–4.6). Reed canary grass productivity was significantly affected by the year of growing and nitrogen fertilization. The average annual dry matter (DM) yield varied from 5442 to 11,114 t ha−1. The highest yields were obtained using the annual rate of 120 kg ha−1 N (nitrogen) fertilizers. Soil liming had a negligible effect on biomass productivity. Nitrogen utilization efficiency (NUE) varied greatly depending on the growing year and N fertilization rate. After analyzing the properties of reed canary grass and wood sawdust granules, it was found that the granules obtained a high density exceeding 1000 kg m−3 DM. The lowest calorific value of reed canary grass pellets was found to be quite high—17.4 MJ kg−1 DM. All harmful emissions did not exceed the permissible values. Summarizing the results, it can be stated that reed canary grass pellets may be recommended for burning in domestic boilers.

The Environmental and Energy Potential of Incinerating Various Biomass Mixtures

2014 ◽  
Vol 1001 ◽  
pp. 114-117 ◽  
Author(s):  
Emília Hroncová ◽  
Juraj Ladomerský
Keyword(s):  
Wheat Straw ◽  
Energy Use ◽  
Raw Materials ◽  
Calorific Value ◽  
Ash Content ◽  
Favourable Effect ◽  
Plant Residues ◽  
Waste Biomass ◽  
Energy Potential ◽  
Biomass Waste

In recent years, research has shown the advisability of seeking new types of biofuel. It has been shown that apart from one-component fuel, it is also advisable to use mixtures composed of basic raw materials. These mixtures may have a favourable effect upon the overall recovery of such fuels. This paper focuses upon options for the energy use of various mixtures of biomass waste. Biomass waste originates from primary agricultural production and countryside maintenance. This mainly consists of plant residues, i.e. straw and hay. Pellets were made using the given biomass. The pellets were prepared by mixing plant residues with spruce shavings as well as from pure materials, i.e. wheat straw, hay and sawdust. Individual types of biomass were mixed in various ratios: 50% wheat straw + 50% hay, 50% wheat straw + 50% sawdust, 50% hay + 50% sawdust, 33% wheat straw + 33% hay + 33% sawdust. The following basic parameters of the prepared samples were monitored: humidity, calorific value and ash content. These parameters influence the environmental as well as economic aspects of options for using these plant residues as fuel. It was discovered during the tests that the highest calorific value was achieved using a sample of biomass prepared by mixing 50% straw and 50% hay. The highest humidity was found in a sample of sawdust and the highest ash content in a sample prepared by mixing 50% straw and 50% hay.

scholarly journals Assessment of Selected Physical Characteristics of the English Ryegrass (Lolium Perenne L.) Waste Biomass Briquettes

2019 ◽  
Vol 23 (4) ◽  
pp. 21-30
Author(s):  
Artur Kraszkiewicz ◽  
Ignacy Niedziółka ◽  
Stanisław Parafiniuk ◽  
Maciej Sprawka ◽  
Małgorzata Dula
Keyword(s):  
Food Industry ◽  
Raw Materials ◽  
Calorific Value ◽  
Ash Content ◽  
Physical Characteristics ◽  
Waste Biomass ◽  
Lolium Perenne L ◽  
Volumetric Density ◽  
Mechanical Durability ◽  
Materials Used

AbstractThe aim of the study was to assess the selected physical characteristics of the briquettes of English ryegrass waste biomass and its mixtures with waste components from the agri-food industry: pea husks and oat middlings. The raw materials used for the tests are characterized by high calorific value and low ash content. Among the tested raw materials, the most favorable values were recorded for oat middlings in this respect. The produced briquettes were characterized by high volumetric density and very diverse mechanical durability. At the same time, the results of the tests on the mechanical durability of briquettes indicated that the use of components of ryegrass mixtures selected for testing brought unsatisfactory results, as compared to other analyzed physical and energy features.

Sign in / Sign up

Export Citation Format

Share Document