scholarly journals Eksperimen Pembuatan Beliung Persegi

2016 ◽  
Vol 1 (1) ◽  
pp. 17
Author(s):  
Ali Akbar
Keyword(s):  
Raw Materials ◽  
Research Paper ◽  
Raw Material ◽  
Stone Tool ◽  
Collective Knowledge ◽  
The People ◽  
Made In

<p>Writing a research paper does not only use three steps, such as analysis, explanation and conclusion, but it may also use analogy. It assumes two phenomena, individual or inter-related, similar. Analogizing method uses historic, ethnographic, and experimental sources. Experimental analogy, in particular, is done by duplication. For example, it is conducted by making a stone tool, which implies that there is a collective knowledge about the characteristics of the raw material and their relations to human. Despite the fact that prehistoric archeological remnants, such as the rectangular adze, were found in different areas in Indonesia, there had not been many who knew about process of making them, and the people who used them. The experimental duplication was done repetitively, gradually, and systematically. Repetition of the production of rectangular adze is made in order to be able to draw a general conclusion. The raw materials that are used are chert, metalimestone, limestone, chalcedony, jasper, and obsidian. A rectangular adze is produced after some steps are taken: firstly, preparing the raw material and the tool, secondly, shaping, and thirdly, molding.</p>

Need of Human Rights as a Better Way of Life

Think India ◽  
2019 ◽  
Vol 22 (3) ◽  
pp. 72-83
Author(s):  
Tushar Kadian
Keyword(s):  
Human Rights ◽  
Basic Needs ◽  
Research Paper ◽  
Human Being ◽  
Way Of Life ◽  
Labour Unions ◽  
The People ◽  
The Subject ◽  
Definition Of ◽  
Made In

Actually, basic needs postulates securing of the elementary conditions of existence to every human being. Despite of the practical and theoretical importance of the subject the greatest irony is non- availability of any universal preliminary definition of the concept of basic needs. Moreover, this becomes the reason for unpredictability of various political programmes aiming at providing basic needs to the people. The shift is necessary for development of this or any other conception. No labour reforms could be made in history till labours were treated as objects. Its only after they were started being treating as subjects, labour unions were allowed to represent themselves in strategy formulations that labour reforms could become a reality. The present research paper highlights the basic needs of Human Rights in life.

scholarly journals Preliminary Archaeopetrological Study of the Lithic Industry From the l’Hort de la Boquera Rock Shelter (Margalef de Montsant, Tarragona, Spain): Applying Mineralogical and Geochemical Techniques

2018 ◽  
Vol 56 ◽  
pp. 23-33
Author(s):  
Mar Rey-Solé ◽  
Maria Pilar García-Argüelles ◽  
Jordi Nadal ◽  
Xavier Mangado ◽  
Anders Scherstén ◽  
...  
Keyword(s):  
Inductively Coupled Plasma ◽  
Raw Materials ◽  
Raw Material ◽  
Stone Tool ◽  
Petrographic Analysis ◽  
X Ray Diffraction ◽  
Inductively Coupled ◽  
Study Results ◽  
Lithic Industry ◽  
Plasma Mass Spectrometry

The l’Hort de la Boquera site is located in the northeastern part of Iberia and its stone tool assemblage includes up to 25,000 flint artefacts. This is the first approach to the analysis of the raw material through an archaeopetrological study. Results were obtained by use of mineralogi¬cal techniques: macroscopic and petrographic analysis, Scanning Electronic Microscopy (SEM), Micro-Raman and X-Ray diffraction (XRD); additionally, Laser Ablation Inductively Coupled Plasma Mass Spectrometry was applied. It has been possible to discriminate at least four flint categories, the ‘Evaporitic flint type’ (with two local subvarieties – ‘Common evaporitic’ and ‘Garnet’ varieties) that comes from local outcrops of the Ulldemolins Complex, and two flint types that had their origin further afield: the ‘Charophyta flint type’ (coming from the Torrente de Cinca Unit) and the ‘Dark flint type’ (from the La Serra Llarga Formation).These results make this study the most comprehensive analysis of raw materials that has been carried out in the area so far

scholarly journals Procurement and mobility during the Late Pleistocene: Characterising the stone-tool assemblage of the Picamoixons site (Tarragona, NE Iberian Peninsula)

2016 ◽  
Vol 3 (2) ◽  
Author(s):  
María Soto
Keyword(s):  
Iberian Peninsula ◽  
Late Pleistocene ◽  
Raw Materials ◽  
Management Strategies ◽  
Raw Material ◽  
Stone Tool ◽  
Petrographic Analysis ◽  
Hunter Gatherers ◽  
Definition Of ◽  
Ne Iberian Peninsula

The Picamoixons site is a rockshelter located in the province of Tarragona (NE Iberian Peninsula). It was object of two rescue campaigns during 1988 and 1993, which led to the recovery of a complete archaeological assemblage, including stone tools as well as faunal and portable art remains that date the occupation to the 14th to 11th millennium BP (calibrated). This study involves a petrographic characterisation of the stone-tool assemblage in order to establish: 1) the procurement areas, 2) the raw materials management strategies and 3) the mobility radius and territorial sizes of the hunter-gatherers groups that occupied the site. The method applied comprises in a multiscale analysis that includes systematic prospection, the petrographic characterisation of geological and archaeological samples, an analysis of the chert types represented in the knapping sequence, and the definition of the mobility axes and areas frequented according to lithic procurement.A petrographic analysis of the chert in the prospected area led to the definition of nine macroscopic varieties related to five types (Vilaplana, Morera, Maset, Vilella and Tossa cherts), related to Lower and Upper Muschelkalk (Triassic), Lutetian, Bartonian (Palaeocene) and Sannonian (Oligocene) deposits.The study of the knapping sequences indicates the main exploitation of Bartonian cherts (Tossa type), and the use of Lutetian cherts (Maset and Morera types) for configuring retouched tools. The exploitation of the remaining raw material types identified is considered sporadic and opportunistic.Defining the procurement areas enabled the mobility radius to be assessed as between 3 and 30 km, highlighting the importance of the fluvial basins as natural movement pathways. The results indicate that the main procurement territory was 16 km2 in area, associable with a forager radius. The most remote procurement distances suggest a maximum exploitation area of 260 km2, defining an intra-regional range. This range presents parallelisms with various contemporaneous hunter-gatherers groups in Western Europe, suggesting a progressive mobility reduction dynamic during the Late Pleistocene-Initial Holocene.

scholarly journals PENGEMBANGAN USAHA BENIH JAGUNG TAHAN KERING

2018 ◽  
Vol 17 (1) ◽  
pp. 70
Author(s):  
S.M. Sarwadana ◽  
B.R.T. Putri ◽  
K.K. Dinata
Keyword(s):  
Raw Materials ◽  
Science And Technology ◽  
Raw Material ◽  
Maize Seed ◽  
Seed Corn ◽  
Entrepreneurial Spirit ◽  
Drought Tolerant ◽  
Production Processes ◽  
Maize Varieties ◽  
Made In

Activities of science and technology for innovation and creativity campus aims are: (1) thecommercialization of science and technology campus creativity as a source of financing for the developmentof institutions; (2) stimulate the entrepreneurial spirit among beings campus, and (3) help people get seeds ofdrought-tolerant maize varieties. Methods of execution include the business aspects of the planned businessactivities consist of: provision of raw materials, production processes, management, marketing, humanresources, facilities, and financial. The raw material is obtained from units of science and technology fornovation and creativity campus and through partnerships with farmers' seed corn. The production processstarted from seed, sorting, and packaging. Marketing is done directly, partnerships with local governmentsand konsiniasi with kiosk / farm shop. Results show that the activities of science and technology unit forinnovation and creativity campus drought-tolerant maize seed has gone well characterized by supportinfrastructure adequate maize seed production; IbIKK unit operates under the management of PSAgroecotechnology Faculty of Agriculture, University of Udayana; Of investment made in 2014 amountingto Rp. 39,550,000; Result of sales corn seeds turnover in 2014 amounted to 400 kg (Rp. 12 million); and netcash flow amounted to 17,672,400.

scholarly journals Raw material optimization and stone tool engineering in the Early Stone Age of Olduvai Gorge (Tanzania)

2020 ◽  
Vol 17 (162) ◽  
pp. 20190377 ◽  
Author(s):  
Alastair Key ◽  
Tomos Proffitt ◽  
Ignacio de la Torre
Keyword(s):  
Functional Performance ◽  
Material Selection ◽  
Raw Materials ◽  
Cutting Tools ◽  
Raw Material ◽  
Stone Tool ◽  
Olduvai Gorge ◽  
Stone Age ◽  
Material Optimization ◽  
Early Stone Age

For more than 1.8 million years hominins at Olduvai Gorge were faced with a choice: whether to use lavas, quartzite or chert to produce stone tools. All are available locally and all are suitable for stone tool production. Using controlled cutting tests and fracture mechanics theory we examine raw material selection decisions throughout Olduvai's Early Stone Age. We quantify the force, work and material deformation required by each stone type when cutting, before using these data to compare edge sharpness and durability. Significant differences are identified, confirming performance to depend on raw material choice. When combined with artefact data, we demonstrate that Early Stone Age hominins optimized raw material choices based on functional performance characteristics. Doing so flexibly: choosing raw materials dependent on their sharpness and durability, alongside a tool's loading potential and anticipated use-life. In this way, we demonstrate that early lithic artefacts at Olduvai Gorge were engineered to be functionally optimized cutting tools.

Partnership Schemes - A Solution to Sustain Raw Materials of Plywoods in Lombok Island

2018 ◽  
Vol 9 (2) ◽  
pp. 365
Author(s):  
Etty SUSILOWATI ◽  
R. Maulana Aliif AKBAR
Keyword(s):  
Qualitative Method ◽  
Local Community ◽  
Raw Materials ◽  
Raw Material ◽  
Timber Species ◽  
Snowball Sampling ◽  
Wood Industry ◽  
Great Opportunity ◽  
The People ◽  
Fierce Competition

The increasing number of community plantation forests in Indonesia, specializing in plywood, has improved the size of this market. Many companies succeed in this business, creating fierce competition for raw material supplies. Additionally, the Indonesian government has intensified the wood industry production in 2015 so that several fast growing and shortage timber species were introduced. However, this great opportunity is also faced with the challenge that timber exported overseas must be certified. The existence of middlemen in the business supply chain can potentially disrupt the business with unsustainable procedures and can harm the environment. In this study, we investigated the requirements of a partnership to establish a sustainable partnership with the local communities, to provide a sustainable environmental development in Lombok and to deliver profitable business prospects to the wood industries. This research focused on investigating Dharma Satya Nusantara Group (DSNG)’s challenge to obtain and to secure raw materials of wood to maintain and to sustain its future plywood manufacturing businesses. A qualitative method was employed by using snowball sampling of 17 individuals, including farmers, landowners, NGOs, middlemen, and logistic companies. Finally, a triangulation method was employed to analyze the data. Our findings proved that a mediator was needed to find mutual goals between private sectors in the local community. The mediator position should be neutral and prohibit from taking a side. DSNG as the buyer could utilize an expert practitioner that would act as a mediator to connect with the people, while the farmers would be supported by cooperation as their connector to DSNG. Finally, a collectivist culture, mutual trust, solidarity, teamwork, and education were essential factors for sustainable partnership.

Raw-Material Availability and the Organization of Technology

1994 ◽  
Vol 59 (1) ◽  
pp. 21-34 ◽  
Author(s):  
William Andrefsky
Keyword(s):  
Production Technology ◽  
Raw Materials ◽  
Poor Quality ◽  
Important Variable ◽  
Raw Material ◽  
Stone Tool ◽  
High Quality ◽  
Formal Tool ◽  
Lithic Raw Materials ◽  
Tool Types

Ethnographic examples of stone-tool makers in Australia and archaeological examples from three different areas in the western United States indicate that the availability of lithic raw materials is an important variable conditioning stone-tool production technology. Attributes of availability such as abundance and quality of lithic raw materials condition the production of formal- vs. informal-tool types. Poor-quality raw materials tend to be manufactured into informal-tool designs. High-quality lithic raw materials tend to be manufactured into formal-tool designs when such materials occur in low abundance. When high-quality materials occur in great abundance both formal- and informal-tool designs are manufactured. Other factors, such as residential mobility or sedentism, are found to be less-important determinates of lithic-production technology.

scholarly journals An Introduction to the Foreign Trade of Mesopotamia In the Light of Cuneiform Documentation of the Third and Second Millennium BC.

2018 ◽  
Vol 1 (120) ◽  
pp. 91-104
Author(s):  
Nawala A. Al-Mutawalli
Keyword(s):  
Foreign Trade ◽  
Agricultural Production ◽  
Raw Materials ◽  
Daily Life ◽  
Alluvial Plain ◽  
Raw Material ◽  
Sheep Breeding ◽  
The Third ◽  
The People ◽  
Cattle And Sheep

Ancient Iraq is very well known as an agricultural economic country, especially, the middle and the southern parts of Mesopotamia, which was called “the Land of Sumer and Akkad “, it's a very rich agricultural country. Sumer's economy was based on agriculture, fishing, and cattle and sheep breeding. Lived on the products of the fertile, irrigated soil, and this situation was clearly reflected in the cuneiform texts unearthed from many sites from the third and second millennium BC. And due to the young geological composition of Mesopotamia, the alluvial plain of ancient Sumer lacked so much important raw materials, these of materials were needed by the craftsmen of Sumer and Akkad for the industry, works of art and daily life. These raw material were, deferent kinds of stone, timber, and metal, therefore, the need for these materials led to exchange what the people had from the agricultural production and industrial goods and material produced by the workshops of temple or palace, such as: animal hides, leather manufactures, wool, oil, cereals, dates, textile, wild and domesticated animals,…etc., also what not existing in the country ([i])   Leemans, W.F., "The Importance of Trade", Iraq-39, (1977), p. 4. Al-Hashimi, Rihdah Jawad, "Obsidian Stone and the Origin of Trade" Sumer-28, (1972), p. 203ff.

scholarly journals A Study of Traditional Toy Making in Channapatna, and Proposal of an Artisan Village

2021 ◽  
Vol 10 (4) ◽  
pp. 191-195
Author(s):  
Ar. Uma S.M ◽  
◽  
Dr. B. Shankar ◽  
Aparna Agaram Krishnan ◽  
◽  
...  
Keyword(s):  
Social Development ◽  
Working Conditions ◽  
Raw Materials ◽  
International Market ◽  
Research Paper ◽  
Paper Briefly ◽  
Made In

Toys are objects made for a child to play with and explore their surroundings. Toys aid in the physical, emotional, cognitive and social development of children. Channapatna toys are soft-wood toys that are made in Channapatna, about 60 km southwest of Bangalore. The toys are eco-friendly, non-toxic and child safe and have been recognized as GI tagged commodities. Artisans majorly acquire the skills from their families who are into toy making since generations, or from a master craftsmen who acts as a head of a group of artisans. It is a craft that is passed on from generation to generation. The toys are also exported and have buyers in an international market. In this research paper, the process of traditional toy making, raw materials required, and methods have been studied in detail, along with the challenges faced by artisans. The artisans engaged in the craft form are mostly dependent on middle-men, and are unaware of benefits and facilities that are available. The paper briefly outlines possible architectural interventions that can improve the working conditions of artisans, and preserve the traditional craft form.

scholarly journals Variability of the Lithic Raw Material in the Upper and Late Palaeolithic sites in Southeastern Poland

2018 ◽  
Vol 56 ◽  
pp. 11-21
Author(s):  
Dariusz Bobak ◽  
Marta Połtowicz-Bobak
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Stone Tool ◽  
Upper Palaeolithic ◽  
The South ◽  
Tool Manufacture ◽  
Western Ukraine ◽  
Later Phase ◽  
Late Palaeolithic ◽  
Lithic Raw Material

In terms of supply of good quality raw materials for stone tool manufacture, the area of southeastern Poland is rather poor. Considering research conducted so far, there are only few sites that can be the basis for analysis. Nevertheless, certain phenomena seem to be characteristic on sites in southeastern Poland in the later phase of the Upper Palaeolithic and in the Late Palaeolithic. There are usually more than one kind of raw material present. Apart from local erratic flint, imported Świeciechów (grey white-spotted) and ‘chocolate’ flint dominate. The presence of both Jurassic (areas near Cracow) and Volhynian flints are poorly recorded, whereas resources from the south are almost absent. These imported raw materials indicate the existence of particularly strong relations linking the areas of southeastern Poland with the Sandomierz Upland, and much weaker relationships with the territories of Lesser Poland and Western Ukraine

Sign in / Sign up

Export Citation Format

Share Document