scholarly journals Toward Robust and Routine Determination of Mw for Small Earthquakes: Application to the 2020 Mw 5.7 Magna, Utah, Seismic Sequence

2021 ◽  
Author(s):  
James Holt ◽  
Katherine M. Whidden ◽  
Keith D. Koper ◽  
Kristine L. Pankow ◽  
Kevin Mayeda ◽  
...  
Keyword(s):  
Spectral Methods ◽  
Moment Tensor ◽  
Coda Wave ◽  
Strongly Correlated ◽  
Seismic Sequence ◽  
Wave Method ◽  
Direct Wave ◽  
Main Requirement ◽  
Relationship Of

Abstract To better characterize seismic hazard, particularly, for induced seismicity, there is an increasing interest in methods to estimate moment magnitude (Mw) for small earthquakes. Mw is generally preferred over other magnitude types, but, it is difficult to estimate Mw for earthquakes with local magnitude (ML) <3–3.5, using conventional moment tensor (MT) inversion. The 2020 Mww 5.7 Magna, Utah, seismic sequence provides an opportunity to illustrate and evaluate the value of spectral methods for this purpose. Starting with a high-quality seismic catalog of 2103 earthquakes (ML<5.6), we estimate Mw using two independent spectral methods—one based on direct waves, yielding Mw,direct, and the other based on coda waves, yielding Mw,coda. For the direct-wave method, we present a non-parametric (NP) inversion scheme that solves for apparent geometrical spreading, G(R), and site effects (S), similar to other NP procedures that have been used to calibrate regional ML scales. The NP inversion is constrained using Mws derived from MTs for nine events in the Magna sequence. We recover statistically robust and physically reasonable G(R) and S and compute Mw,direct for 635 Magna earthquakes down to ML 0.7. For the coda-wave method, we consider two separate calibration schemes involving previous MT solutions and compute Mw,coda for 311 earthquakes down to ML 1.0. For 280 of the events that were processed with both methods—Mw,direct and Mw,coda—are strongly correlated (r = 0.98), with a mean difference of only 0.05. We compare Mw,direct and Mw,coda with ML and find reasonably good agreement for ML<3.6 with the theoretically predicted relationship of Mw=(2/3)ML+C, in which C is a regional constant. Our results imply that seismic network operators can use spectral-based Mw estimates to replace ML estimates for events with ML≥1.0, and possibly smaller. The main requirement is the existence of a small number of MT solutions for calibration purposes.

STEM and ELS Observation of Early Oxide Formation on the Surface of Cr Thin Films

1980 ◽  
Vol 38 ◽  
pp. 412-413
Author(s):  
Fumio Watari ◽  
J. M. Cowley
Keyword(s):  
Thin Films ◽  
Optical System ◽  
Room Temperature ◽  
Oxide Formation ◽  
Initial Nucleation ◽  
Diffraction Patterns ◽  
Relationship Of ◽  
Multiple Twinning ◽  
Moderately High Temperature

STEM coupled with the optical system was used for the investigation of the early oxidation on the surface of Cr. Cr thin films (30 – 1000Å) were prepared by evaporation onto the polished or air-cleaved NaCl substrates at room temperature and 45°C in a vacuum of 10−6 Torr with an evaporation speed 0.3Å/sec. Rather thick specimens (200 – 1000Å) with various preferred orientations were used for the investigation of the oxidation at moderately high temperature (600 − 1100°C). Selected area diffraction patterns in these specimens are usually very much complicated by the existence of the different kinds of oxides and their multiple twinning. The determination of the epitaxial orientation relationship of the oxides formed on the Cr surface was made possible by intensive use of the optical system and microdiffraction techniques. Prior to the formation of the known rhombohedral Cr2O3, a thin spinel oxide, probably analogous to γ -Al203 or γ -Fe203, was formed. Fig. 1a shows the distinct epitaxial growth of the spinel (001) as well as the rhombohedral (125) on the well-oriented Cr(001) surface. In the case of the Cr specimen with the (001) preferred orientation (Fig. 1b), the rings explainable by spinel structure appeared as well as the well defined epitaxial spots of the spinel (001). The microdif fraction from 20A areas (Fig. 2a) clearly shows the same pattern as Fig. Ia with the weaker oxide spots among the more intense Cr spots, indicating that the thickness of the oxide is much less than that of Cr. The rhombohedral Cr2O3 was nucleated preferably at the Cr(011) sites provided by the polycrystalline nature of the present specimens with the relation Cr2O3 (001)//Cr(011), and by further oxidation it grew into full coverage of the rest of the Cr surface with the orientation determined by the initial nucleation.

Calculating the aerodynamics of vertical axis wind turbines

2012 ◽  
Vol 34 (3) ◽  
pp. 169-184 ◽  
Author(s):  
Hoang Thi Bich Ngoc
Keyword(s):  
Wind Turbine ◽  
Incidence Angle ◽  
Vertical Axis ◽  
Rotor Blades ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Velocity Triangle ◽  
Relationship Of ◽  
The Relationship

Vertical axis wind turbine technology has been applied last years, very long after horizontal axis wind turbine technology. Aerodynamic problems of vertical axis wind machines are discussible. An important problem is the determination of the incidence law in the interaction between wind and rotor blades. The focus of the work is to establish equations of the incidence depending on the blade azimuth, and to solve them. From these results, aerodynamic torques and power can be calculated. The incidence angle is a parameter of velocity triangle, and both the factors depend not only on the blade azimuth but also on the ratio of rotational speed and horizontal speed. The built computational program allows theoretically selecting the relationship of geometric parameters of wind turbine in accordance with requirements on power, wind speed and installation conditions.

Tire Treadwear — A Comprehensive Evaluation of the Factors: Generic Type, Aspect Ratio, Tread Pattern, and Tread Composition Part I: Introduction and Details on the Organization of the Program

1986 ◽  
Vol 14 (4) ◽  
pp. 201-218 ◽  
Author(s):  
A. G. Veith
Keyword(s):  
Aspect Ratio ◽  
Comprehensive Evaluation ◽  
Test Method ◽  
Interactive Effects ◽  
Data Analyses ◽  
Main Effect ◽  
Systematic Determination ◽  
Relationship Of ◽  
The Relationship

Abstract This four-part series of papers addresses the problem of systematic determination of the influence of several tire factors on tire treadwear. Both the main effect of each factor and some of their interactive effects are included. The program was also structured to evaluate the influence of some external-to-tire conditions on the relationship of tire factors to treadwear. Part I describes the experimental design used to evaluate the effects on treadwear of generic tire type, aspect ratio, tread pattern (groove or void level), type of pattern (straight rib or block), and tread compound. Construction procedures and precautions used to obtain a valid and functional test method are included. Two guiding principles to be used in the data analyses of Parts II and III are discussed. These are the fractional groove and void concept, to characterize tread pattern geometry, and a demonstration of the equivalence of wear rate for identical compounds on whole tread or multi-section tread tires.

scholarly journals Multimessenger Probes for New Physics in Light of A. Sakharov’s Legacy in Cosmoparticle Physics

Universe ◽  
2021 ◽  
Vol 7 (7) ◽  
pp. 222
Author(s):  
Maxim Khlopov
Keyword(s):  
Standard Model ◽  
Particle Physics ◽  
New Physics ◽  
Physical Models ◽  
Beyond The Standard Model ◽  
Fundamental Relationship ◽  
Relationship Of ◽  
The Universe ◽  
Selection Of

A.D. Sakharov’s legacy in now standard model of the Universe is not reduced to baryosynthesis but extends to the foundation of cosmoparticle physics, which studies the fundamental relationship of cosmology and particle physics. Development of cosmoparticle physics involves cross-disciplinary physical, astrophysical and cosmological studies of physics Beyond the Standard model (BSM) of elementary particles. To probe physical models for inflation, baryosynthesis and dark matter cosmoparticle physics pays special attention to model dependent messengers of the corresponding models, making their tests possible. Positive evidence for such exotic phenomena as nuclear interacting dark atoms, primordial black holes or antimatter globular cluster in our galaxy would provide the selection of viable BSM models determination of their parameters.

Knowledge management implementation in Indian automobile ancillary industries

2016 ◽  
Vol 11 (3) ◽  
pp. 802-810 ◽  
Author(s):  
Nitin Yashwant Patil ◽  
Ravi M. Warkhedkar
Keyword(s):  
Knowledge Management ◽  
Industrial Area ◽  
Total Quality ◽  
Limited Data ◽  
Interpretive Structural Modeling ◽  
Content Type ◽  
Relationship Of ◽  
Power And Dependence ◽  
The Relationship

Purpose In the past decade, much has been written about knowledge management (KM) in the manufacturing; however, less attention has been paid to the Indian automobile ancillary industries located in Chinchwad, Pune. It is suitable to find out the relationship of the factors of the study. It helps in identifying the hierarchy of factors to be taken, and interlinking of production department with KM improves the productivity of the industries. Categorization of these principles based on their driving power (principles which hold other principles) and dependence (principles which are dependent on other principles) has also been examined for KM implementation to study the driving power and dependence power of these principles. This paper aims to determine the roadmap of KM implementation and categorize KM principles based on their driving power for manufacturing industries with the use of the interpretive structural modeling (ISM)-based model. The results indicate that the principles possessing higher driving power, such as KM, inventory control, quality control, productivity and scheduling and their interlinking. The major contribution of this research lies in the development of contextual relationship among various identified factors of KM and determination of their driving and dependence power through a single systemic framework. Design/methodology/approach In this paper, author find out the suitability ISM for Indian Automobile industries to find the relation among the variables. Findings ISM model has been developed for the hierarchy of the identified KM. As ISM model results a hypothetical hierarchy which needs a proper quantitative analysis to evaluate their percentage effectiveness in the hierarchy. Research limitations/implications It is applied to automobile industries with limited number of variables that will show the dependence variable and driving variables and their interrelations. It can be applied other fields to fine the relationship of variables. Practical implications The ISM may be used in supply chain management and total quality management to find interlinking between the variables. Originality/value The limited data collected from Pimpri Chinchwad industrial area of Pune from Maharashtra state (India).

scholarly journals Comparison of Three Solid Phase Materials for the Extraction of Carboxylic Acids from River Water Followed by 2D GC × GC-TOFMS Determination

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
G. O. Bosire ◽  
J. C. Ngila ◽  
H. Parshotam
Keyword(s):  
Carboxylic Acid ◽  
Carboxylic Acids ◽  
Natural Organic Matter ◽  
Solid Phase ◽  
Cooling Water ◽  
Raw Water ◽  
Aliphatic Carboxylic Acid ◽  
Hydrophobic Nature ◽  
Relationship Of

The extraction and determination of aliphatic and aromatic carboxylic acids as well as their influence on the aromaticity and molecularity relationship of natural organic matter (NOM) in water are reported in this study. Three solid phase extraction (SPE) sorbents were used and their extraction efficiencies evaluated after chromatographic determinations (using gas chromatography with a time of flight mass spectrometer (GC × GC-TOFMS) and liquid chromatography with organic carbon detector (LC-OCD)). More than 42 carboxylic acids were identified in raw water from the Vaal River, which feeds the Lethabo Power Generation Station, South Africa, with cooling water. The aromatic carboxylic acid efficiency (28%) was achieved by using Strata™X SPE while the highest aliphatic carboxylic acid efficiency (92.08%) was achieved by silica SPE. The hydrophobic nature of NOM in water depends on the nature of organic compounds in water, whether aromatic or aliphatic. The LC-OCD was used to assess the hydrophobicity levels of NOM as a function of these carboxylic acids in cooling water. The LC-OCD results showed that the aromatic nature of NOM in SPE filtered water followed the order Silica>Strata X>C-18. From the results, the hydrophobicity degree of the samples depended on the type and number of carboxylic acids that were removed by the SPE cartridges.

Еarly diagnosis of multiple sclerosis: experience with the use of class G oligoclonal immunoglobulin

2021 ◽  
Vol 26 (3) ◽  
pp. 34-39
Author(s):  
Z. A. Goncharova ◽  
Y. Y. Pogrebnova ◽  
N. M. Yarosh ◽  
S. M.M. Sehweil
Keyword(s):  
Multiple Sclerosis ◽  
Early Diagnosis ◽  
Literature Review ◽  
Demyelinating Disease ◽  
Mcdonald Criteria ◽  
Mri Features ◽  
Oligoclonal Igg ◽  
Relationship Of ◽  
The Relationship

The article presents the literature review and our experience in early diagnosis of multiple sclerosis based on the updated McDonald criteria of 2017. The study included 256 patients with clinic symptoms of probable idiopathic infl ammatory demyelinating disease, including rare and atypical forms of demyelination. As a result of the study the sensitivity and specifi city of the determination of oligoclonal immunoglobulin G in the population of Rostov-on-Don was described for the fi rst time, including dependence of the duration of the disease. The relationship of clinical and MRI features of the fi rst attack of the disease with the probability of determining oligoclonal IgG in the cerebrospinal fl uid is refl ected

Moment-tensor solutions for the 24 November 1987 Superstition Hills, California, earthquakes

1989 ◽  
Vol 79 (2) ◽  
pp. 493-499
Author(s):  
Stuart A. Sipkin
Keyword(s):  
Main Shock ◽  
Moment Tensor ◽  
Time Dependent ◽  
Origin Time ◽  
Data Set ◽  
Filter Theory ◽  
Long Period ◽  
Seismograph Network ◽  
Scalar Moment

Abstract The teleseismic long-period waveforms recorded by the Global Digital Seismograph Network from the two largest Superstition Hills earthquakes are inverted using an algorithm based on optimal filter theory. These solutions differ slightly from those published in the Preliminary Determination of Epicenters Monthly Listing because a somewhat different, improved data set was used in the inversions and a time-dependent moment-tensor algorithm was used to investigate the complexity of the main shock. The foreshock (origin time 01:54:14.5, mb 5.7, Ms 6.2) had a scalar moment of 2.3 × 1025 dyne-cm, a depth of 8 km, and a mechanism of strike 217°, dip 79°, rake 4°. The main shock (origin time 13:15:56.4, mb 6.0, Ms 6.6) was a complex event, consisting of at least two subevents, with a combined scalar moment of 1.0 × 1026 dyne-cm, a depth of 10 km, and a mechanism of strike 303°, dip 89°, rake −180°.

A Comparative Analysis of the Power of Selected European Countries. The Economic Determinants

2021 ◽  
Vol 37 (37) ◽  
pp. 22-42
Author(s):  
Alicja Paluch ◽  
Henryk Spustek
Keyword(s):  
Czech Republic ◽  
Comparative Analysis ◽  
European Countries ◽  
Economic Power ◽  
Strongly Correlated ◽  
The Czech Republic ◽  
Independent Variables ◽  
Economic Sphere ◽  
National Power

The ever-increasing need for in-depth analysis and quantification of the national power, in particular ‘hard’ and ‘soft’ power-generating factors as well as difficulties in identifying a comprehensive and effective method for scientific determination of the national power, have given rise to research in the indicated scientific issues within this article. The presented considerations aim to define the assumptions for a descriptive sub-model that would enable a comparison of Poland’s power in the economic sphere (which is a component of the non-military sphere) with the power of selected European countries. The research hypothesis is that, among the variety of descriptive variables in the economic sphere of the national power, there is a subset of mutually independent variables, at the same time strongly correlated with the national power, which make it possible to define assumptions for the sub-model of the national power. The steps of the research procedure were carried out using the method of system analysis (multi-criteria comparative analysis) and statistical analysis. The research activities undertaken have shown that the factors that are strongly correlated with the national power in the economic area of the European countries adopted for the analysis are: dynamics of industrial production, private sector credit flows and economic freedom index. The comparative analysis carried out demonstrates that the greatest increase in the economic power in the analysed period took place in Germany (0.68). Slightly smaller growth was recorded in the Czech Republic (0.62) and Poland (0.60), while the lowest value of increase was in Romania (0.23). The conducted qualitative comparative analysis of the economic power of selected European countries allowed to conclude that the independent variables identified are crucial for the formation of the economic power of the analysed countries. At the same time, a fairly strong position of the Czech Republic and Poland in relation to the economic power of Germany was found. The performed quantification of the economic power of the European countries provides a basis for the correct determination of changes in the power distribution of political units, assessment of the power and resources held by the state.

Sign in / Sign up

Export Citation Format

Share Document