New method for Handling of Infrastructural Constraints for Integrated Modeling in Steady Case

2021 ◽  
Author(s):  
Dmitry Moiseevich Olenchikov
Keyword(s):  
Optimal Solution ◽  
Field Development ◽  
Flow Models ◽  
Second Stage ◽  
Operation Modes ◽  
Reservoir Flow ◽  
Terminal Constraints ◽  
Surface Network ◽  
Two Stages ◽  
And Control

Abstract Recently, more and more reservoir flow models are being extended to integrated ones to consider the influence of the surface network on the field development. A serious numerical problem is the handling of constraints in the form of inequalities. It is especially difficult in combination with optimization and automatic control of well and surface equipment. Traditional numerical methods solve the problem iteratively, choosing the operation modes for network elements. Sometimes solution may violate constraints or not be an optimal. The paper proposes a new flexible and relatively efficient method that allows to reliably handle constraints. The idea is to work with entire set of all possible operation modes according to constraints and control capabilities. Let's call this set an operation modes domain (OMD). The problem is solved in two stages. On the first stage (direct course) the OMD are calculated for all network elements from wells to terminal. Constraints are handled by narrowing the OMD. On the second stage (backward course) the optimal solution is chosen from OMD.

scholarly journals Awareness of COVID-19 Before and After Quarantine Based on Crowdsourced Data From Rabigh City, Saudi Arabia: A Cross-Sectional and Comparative Study

2021 ◽  
Vol 9 ◽  
Author(s):  
Mai Aldhahri ◽  
Rana Alghamdi
Keyword(s):  
Saudi Arabia ◽  
Online Survey ◽  
Control Measures ◽  
Infection Prevention And Control ◽  
Cross Sectional ◽  
Second Stage ◽  
Before And After ◽  
Prevention And Control Measures ◽  
Two Stages ◽  
And Control

Background: Infection prevention and control measures are critical for the prevention of the spread of COVID-19.Aim: In this study, we aimed to measure and evaluate the level of awareness and knowledge of the prevention, symptoms, and transmission control of COVID-19 before and after quarantine among the residents of Rabigh city and adjacent villages in Saudi Arabia.Methods: A cross-sectional online survey was conducted in two stages: the first stage took place before quarantine and the second stage took place after quarantine. The survey was filled out electronically.Results: A total of 448 participants responded and filled out the questionnaires. Females (73.70%) formed the largest number of participants for both stages. The majority of the participants were <30 years old (50.90%) and had a high education level in various sectors and levels (97.1%). It was noticeable that during the first stage, the participants' awareness of COVID-19 symptoms was not very high: 13.62% did not know about the symptoms. However, by the second stage, awareness about symptoms had increased (9.6%).Conclusion: The residents of Rabigh city and the surrounding villages had good levels of knowledge about COVID-19.

Features and measures to improve the efficiency of development of a perspective small oil field

2020 ◽  
pp. 31-43
Author(s):  
T. K. Apasov ◽  
G. T. Apasov ◽  
E. E. Levitina ◽  
E. I. Mamchistova ◽  
N. V. Nazarova ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Oil Field ◽  
Oil Fields ◽  
Transport Infrastructure ◽  
Field Analysis ◽  
Field Development ◽  
Oil Reserves ◽  
Second Stage ◽  
Recoverable Reserves ◽  
Two Stages

Despite the current political and economic situation in Russia, mining in small oil fields is important and topical issue. We have conducted a geological and field analysis of the development of one of such small oil fields from setting into operation to shut down and have identified the reasons for the low production of oil reserves and the failure to achieve the design oil recovery factor. At the same time, the field has sufficient reserves of recoverable reserves, and there is an available transport infrastructure, which proves the necessity to consider rerun it for the development. For this purpose, geological and technical actions have been developed and are being proposed for implementation to improve the efficiency of field development. These actions envisage implementation in two stages: the first with minimal costs and the second with higher costs. At the first stage, at the existing reservoir pressure, we recommend to perform forced fluid withdrawals with an increase in depression on the reservoir. At the second stage, we offer actions at a higher cost, such as hydraulic fracturing, sidetracking. As a result of the analysis, actions have been developed to increase selection from initial recoverable reserves and increase the economic efficiency when the field is rerun.

Altered Fine Structure of B Lymphocytes Correlated with Defective Terminal Differentiation

1973 ◽  
Vol 31 ◽  
pp. 386-387
Author(s):  
Dale E. Bockman ◽  
L. Y. Frank Wu ◽  
Alexander R. Lawton ◽  
Max D. Cooper
Keyword(s):  
Immune Deficiency ◽  
B Lymphocytes ◽  
Plasma Cells ◽  
Present Report ◽  
Specific Antigen ◽  
Terminal Differentiation ◽  
Second Stage ◽  
Two Stages ◽  
Deficiency Diseases ◽  
Cell Line Generation

B-lymphocytes normally synthesize small amounts of immunoglobulin, some of which is incorporated into the cell membrane where it serves as receptor of antigen. These cells, on contact with specific antigen, proliferate and differentiate to plasma cells which synthesize and secrete large quantities of immunoglobulin. The two stages of differentiation of this cell line (generation of B-lymphocytes and antigen-driven maturation to plasma cells) are clearly separable during ontogeny and in some immune deficiency diseases. The present report describes morphologic aberrations of B-lymphocytes in two diseases in which second stage differentiation is defective.

Interference mitigation in point to point wireless sensor networks using LSP protocol and time division multiplexing approach

2020 ◽  
Vol 39 (4) ◽  
pp. 5449-5458
Author(s):  
A. Arokiaraj Jovith ◽  
S.V. Kasmir Raja ◽  
A. Razia Sulthana
Keyword(s):  
Energy Consumption ◽  
Large Scale ◽  
Control Parameter ◽  
Interference Mitigation ◽  
Wireless Sensor ◽  
Point To Point ◽  
A Minor ◽  
Two Stages ◽  
Time Division ◽  
And Control

Interference in Wireless Sensor Network (WSN) predominantly affects the performance of the WSN. Energy consumption in WSN is one of the greatest concerns in the current generation. This work presents an approach for interference measurement and interference mitigation in point to point network. The nodes are distributed in the network and interference is measured by grouping the nodes in the region of a specific diameter. Hence this approach is scalable and isextended to large scale WSN. Interference is measured in two stages. In the first stage, interference is overcome by allocating time slots to the node stations in Time Division Multiple Access (TDMA) fashion. The node area is split into larger regions and smaller regions. The time slots are allocated to smaller regions in TDMA fashion. A TDMA based time slot allocation algorithm is proposed in this paper to enable reuse of timeslots with minimal interference between smaller regions. In the second stage, the network density and control parameter is introduced to reduce interference in a minor level within smaller node regions. The algorithm issimulated and the system is tested with varying control parameter. The node-level interference and the energy dissipation at nodes are captured by varying the node density of the network. The results indicate that the proposed approach measures the interference and mitigates with minimal energy consumption at nodes and with less overhead transmission.

Distributed Entropy Energy-Efficient Clustering algorithm for cluster head selection (DEEEC)

2020 ◽  
Vol 39 (6) ◽  
pp. 8139-8147
Author(s):  
Ranganathan Arun ◽  
Rangaswamy Balamurugan
Keyword(s):  
Energy Efficient ◽  
Clustering Algorithm ◽  
Cluster Head ◽  
Residual Energy ◽  
Energy Utilization ◽  
Sensor Nodes ◽  
Second Stage ◽  
Energy Efficient Clustering ◽  
Two Stages ◽  
Ch Selection

In Wireless Sensor Networks (WSN) the energy of Sensor nodes is not certainly sufficient. In order to optimize the endurance of WSN, it is essential to minimize the utilization of energy. Head of group or Cluster Head (CH) is an eminent method to develop the endurance of WSN that aggregates the WSN with higher energy. CH for intra-cluster and inter-cluster communication becomes dependent. For complete, in WSN, the Energy level of CH extends its life of cluster. While evolving cluster algorithms, the complicated job is to identify the energy utilization amount of heterogeneous WSNs. Based on Chaotic Firefly Algorithm CH (CFACH) selection, the formulated work is named “Novel Distributed Entropy Energy-Efficient Clustering Algorithm”, in short, DEEEC for HWSNs. The formulated DEEEC Algorithm, which is a CH, has two main stages. In the first stage, the identification of temporary CHs along with its entropy value is found using the correlative measure of residual and original energy. Along with this, in the clustering algorithm, the rotating epoch and its entropy value must be predicted automatically by its sensor nodes. In the second stage, if any member in the cluster having larger residual energy, shall modify the temporary CHs in the direction of the deciding set. The target of the nodes with large energy has the probability to be CHs which is determined by the above two stages meant for CH selection. The MATLAB is required to simulate the DEEEC Algorithm. The simulated results of the formulated DEEEC Algorithm produce good results with respect to the energy and increased lifetime when it is correlated with the current traditional clustering protocols being used in the Heterogeneous WSNs.

Analisis Kebutuhan Petunjuk Praktikum Berbasis Keterampilan Proses Sains untuk Mencapai Kemampuan Merancang Eksperimen

2019 ◽  
Vol 2 (2) ◽  
Author(s):  
Fitriah Khoirunnisa ◽  
Friska Septiani Silitonga ◽  
Veri Firmansyah
Keyword(s):  
Core Competence ◽  
Process Skills ◽  
Learning Materials ◽  
Science Process Skills ◽  
Second Stage ◽  
The Core ◽  
The Core Competence ◽  
Two Stages ◽  
Practical Instruction ◽  
Design Experiments

Penelitian ini bertujuan menganalisis kebutuhan petunjuk praktikum berbasis Keterampilan Proses Sains (KPS) untuk mencapai kemampuan merancang eksperimen pada materi kalor reaksi kalorimetri. Penelitian dilakukan terhadap peserta didik kelas XI SMA Negeri 2 Kota Tanjungpinang. Variabel penelitian mencakup analisis kebutuhan bahan ajar dan analisis kesesuaian Kompetensi Inti (KI) dan Kompetensi Dasar (KD). Jenis penelitian yang dilakukan adalah penelitian deskriptif kualitatif. Tahapan pertama dalam penelitian ini adalah menganalisis kebutuhan bahan ajar dengan cara membandingkan dua petunjuk praktikum yang selama ini telah digunakan di sekolah tersebut, ditinjau dari aspek struktur format penulisan, aspek kreativitas, dan aspek keterampilan proses sains yang terdapat dalam petunjuk praktikum. Sehingga didapatkan kesimpulan bahwa petunjuk praktikum yang selama ini digunakan tidak memberikan kesempatan kepada peserta didiknya untuk merancang eksperimen yang telah ditentukan. Tahapan kedua yaitu menganalisis kesesuaian kompetensi inti dan kompetensi dasar, yang bertujuan untuk menentukan indikator pencapaian kompetensi (IPK) yang akan menjadi acuan dalam mengembangkan petunjuk praktikum berbasis keterampilan proses sains. Dari kedua tahapan yang telah dilakukan maka dapat disimpulkan bahwa peserta didik memerlukan petunjuk praktikum yang mampu mengonstruksi pikiran dan mengaktifkan kinerja mereka, sehingga pendekatan Keterampilan Proses Sains menjadi pilihan dalam mengembangkan petunjuk praktikum yang sesuai dengan karakteristik kurikulum 2013.   This research aims to analyze the needs of Science Process Skills based Practical Instruction to achieve the ability to design experiments on the calor of reaction. This research was done to the students of class XI SMA Negeri 2 Tanjungpinang City. Research Variable includes the analysis of the needs of the learning materials and analysis of the suitability of the Core Competence (KI) and Basic Competence (KD). The type of research conducted is descriptive qualitative research. The first stages in this research is to analyze the needs of learning materials by comparing two practical instructions that had been implementing in the school, from the aspects of the structure of writing format, creativity, and science process skills embedded in practical instructions. The conclusion of this research that current practical instructions does not give an opportunity to the participants to design determined experiments. The second stage, namely analyzing the suitability of core competence and basic competence, which aims to determine the indicators of achievement of the competencies (GPA) which will be a reference in developing process skills-based teaching instructions science. Of the two stages that has been done then it can be concluded that learners need practical instructions to construct  thinking and and their performance, so the Science Process Skills approach is an option in developing practical instruction suitable for the characteristics of the curriculum of 2013.

Drought stress and osmo-priming effects on physiological and biochemical characteristics of Ocimum basilicum

2016 ◽  
Vol 6 (1) ◽  
pp. 905-913
Author(s):  
Bahram Majd Nassiry ◽  
Neda Mohammadi
Keyword(s):  
Drought Stress ◽  
Total Protein ◽  
Catalase Activity ◽  
Seedling Emergence ◽  
Seed Priming ◽  
Ocimum Basilicum ◽  
Field Development ◽  
Physiological And Biochemical Characteristics ◽  
Germination Characteristics ◽  
And Control

    One of the effects of reducing water content on soil is reduction of growth and development of seedlings and variation of field development. Seed priming technique has been known as a challenge to improve germination and seedling emergence under different environmental stresses. The objectives of this research were to evaluate the effects of osmo-priming on germination characteristics and changes of proline, protein and catalase activity of Ocimum basilicum seeds. Results showed that drought stress reduced the germination characteristics and drought stress in -8 bar was the critical stress.  Priming treatments were include KNO3, PEG and NaCl by 0, -4 and -8 bar concentrations. The seeds were primed with those materials for 8 and 16 hours. The highest germination characteristics were obtained from nitrate potassium in -8 bar for 16 hours priming. Therefore the best seed treatment under drought stress during germination was obtained from the osmo-primed with -8 bar nitrate potassium for 16 hours. The drought stress increased proline and catalase activity but reduced total protein. Priming treatment increases proline, total protein and catalase activity under drought and control conditions. It is concluded that priming results in improvement in germination components of Ocimum basilicum in drought stress conditions and increases the resistance to drought stress with improvement of proline, protein and catalase activity in germination phase.

ESTIMATING GAS AND ROCK OUTBURST RISK ON THE BASIS OF KNOWLEDGE AND EXPERIENCE – THE EXPERT SYSTEM BASED ON FUZZY LOGIC

2014 ◽  
Vol 59 (1) ◽  
pp. 41-52 ◽  
Author(s):  
Norbert Skoczylas
Keyword(s):  
Fuzzy Logic ◽  
Expert System ◽  
Mining Industry ◽  
Automatic Assessment ◽  
Science Field ◽  
Second Stage ◽  
Two Stages ◽  
Outburst Hazard

Abstract The Author endeavored to consult some of the Polish experts who deal with assessing and preventing outburst hazards as to their knowledge and experience. On the basis of this knowledge, an expert system, based on fuzzy logic, was created. The system allows automatic assessment of outburst hazard. The work was completed in two stages. The first stage involved researching relevant sources and rules concerning outburst hazard, and, subsequently, determining a number of parameters measured or observed in the mining industry that are potentially connected with the outburst phenomenon and can be useful when estimating outburst hazard. Then, the Author contacted selected experts who are actively involved in preventing outburst hazard, both in the industry and science field. The experts were anonymously surveyed, which made it possible to select the parameters which are the most essential in assessing outburst hazard. The second stage involved gaining knowledge from the experts by means of a questionnaire-interview. Subjective opinions on estimating outburst hazard on the basis of the parameters selected during the first stage were then systematized using the structures typical of the expert system based on fuzzy logic.

AUTOMATED SYNTHESIS OF BROADBAND MATCHING AND FILTERING DEVICES

2018 ◽  
pp. 48-52
Author(s):  
S. V. Popov ◽  
G. N. Devyatkov
Keyword(s):  
Transmission Lines ◽  
Synthesis Method ◽  
Optimal Solution ◽  
Complex Problem ◽  
Matching Problem ◽  
Engineering Product ◽  
Second Stage ◽  
Automated Method ◽  
Broadband Matching ◽  
Element Base

When designing radioelectronic devices, that are included in the composition of various systems, it is important to solve broadband matching problem and filtering problem. However, usually these problems are separated and not considered together. Moreover, the synthesis of filters does not take into account the behavior of impedances of the generator and the load in the stopbands. The solution of the complex problem is actual, since it allows expanding the functionality of the device, which can greatly simplify the construction of the radio engineering product. It should be noted that in the known literature solution of this problem in such a formulation is not considered. The aim of the work is to develop a synthesis method and algorithm of broadband devices that connect arbitrary immitances of the generator and the load, and these devices should perform simultaneously functions of both matching and filtering in reactive lumped electric element base and in distributed electric element base, limited only by transmission lines with T-waves. In this paper, a two-stage automated method of synthesis presented here stage allows at the first to adequately find a good initial solution to the posed problem (determining structure and parameters of the broadband matching and filtering quadrupole), in the second stage this approach allows to find the optimal solution to the complex problem, taking into account the constraints on physical and circuit realizability. In this work, the synthesis of broadband matching and filtering devices in lumped and distributed electrical element basis is carried out, and these devices connect complex impedances of the source and the load. The characteristics of the devices obtained after the synthesis show that the solution of the complex problem of matching and filtering gives a significant improvement in filtering properties with small losses in the level of transmitted power.

Integrated assessment and mapping of the environmental situation in the Russian Federation regions

2017 ◽  
Vol 924 (6) ◽  
pp. 6-16
Author(s):  
V.S. Tikunov ◽  
O.Yu. Chereshnia
Keyword(s):  
Russian Federation ◽  
Pollution Index ◽  
Pollution Level ◽  
Anthropogenic Pressure ◽  
Environmental Capacity ◽  
Environmental Friendliness ◽  
Second Stage ◽  
Environmental Situation ◽  
The Russian Federation ◽  
Two Stages

The article presents a methodology for a comprehensive assessment of the environmental situation in Russian Federation regions based on the pollution index and the index of the ecological tension. The evaluation was carried out in two stages. At the first stage, the degree of pollution of the atmosphere, hydrosphere and lithosphere of the regions was estimated on the basis of the emission of pollutants into the atmosphere, departing from stationary sources, the formation of solid domestic wastes (SDW) and the discharge of contaminated wastewater. Based on these three indicators, a pollution index was constructed that estimates aggregate pollution level. In the second stage, the authors made the estimation of loads generated by atmospheric emissions, solid waste and waste water discharged into the territory of each region, per capita and in relation to the environmental capacity of the economy. This allows us to take into account the area of pollution, anthropogenic pressure and environmental responsibility of the population, as well as the environmental friendliness of production. On the basis of relative indicators, the index of ecological tension was created.

Sign in / Sign up

Export Citation Format

Share Document