Treatment of Industrial Wastewaters

1986 ◽  
Vol 18 (3) ◽  
pp. 5-16 ◽  
Author(s):  
H. Kiestra ◽  
E. Eggers
Keyword(s):  
Wastewater Treatment ◽  
Industrial Wastewater ◽  
Energy Demand ◽  
Biological Treatment ◽  
Anaerobic Treatment ◽  
Current Treatment ◽  
Oil Refinery ◽  
Treatment Processes ◽  
Physico Chemical ◽  
Operational Aspects

A general analysis is made of the current treatment methods for industrial wastewater. Mechanical, physico-chemical and biological treatment processes are discussed and the pros and contras of aerobic versus anaerobic treatment are listed, in terms of BOD and COD reduction, energy demand, operational aspects, land use, sensitivity and sludge production. In general, anaerobic treatment is attractive in cases where wastewater with high BOD concentrations has to be treated while aerobic treatment is less sensitive and allows (de) nitrification in the same reactor. The latest developments in wastewater treatment, such as the ANAMET and the Gist-Brocades systems, are presented. Three cases of industrial wastewater treatment are elaborated, concerning effluents from a tannery, a slaughterhouse and an oil refinery.

Elimination of micropollutants and hazardous substances at the source in the chemical and pharmaceutical industry

2007 ◽  
Vol 56 (12) ◽  
pp. 119-123 ◽  
Author(s):  
C. Blöcher
Keyword(s):  
Waste Water ◽  
Wastewater Treatment ◽  
Pharmaceutical Industry ◽  
Industrial Wastewater ◽  
Biological Treatment ◽  
Treatment Plant ◽  
Hazardous Substances ◽  
Advantages And Disadvantages ◽  
Treatment Processes ◽  
Pharmaceutical Production

Industrial wastewater, especially from chemical and pharmaceutical production, often contains substances that need to be eliminated before being discharged into a biological treatment plant and following water bodies. This can be done within the production itself, in selected waste water streams or in a central treatment plant. Each of these approaches has certain advantages and disadvantages. Furthermore, a variety of wastewater treatment processes exist that can be applied at each stage, making it a challenging task to choose the best one in economic and ecological terms. In this work a general approach for that and examples from practice are discussed.

Изучение отклика дегидрогеназной активности ила на изменение технологических параметров работы аэротенка

2020 ◽  
Author(s):  
N. Zaletova ◽  
S. Zaletov
Keyword(s):  
Wastewater Treatment ◽  
Dehydrogenase Activity ◽  
Biological Treatment ◽  
Biological Process ◽  
Organic Load ◽  
Treatment Processes ◽  
Mode Of Operation ◽  
Concentrated Solution ◽  
Available Information ◽  
Complicated Mechanism

Биологический метод очистки сточных вод представляет собой сложный многокомпонентный процесс, ключевой составляющей которого является работа ферментной системы. Известно, что одним из важнейших ферментов, обеспечивающих биологический процесс, являются дегидрогеназы. Полностью сложнейший механизм действия ферментов до конца пока не раскрыт, однако в практике контроля процессов биологической очистки используется показатель дегидрогеназной активности ила. Результаты исследований позволили дополнить имеющуюся информацию фактическими данными о взаимообусловленности уровня дегидрогеназной активности ила и показателей отдельных технологических параметров биологической очистки. Показано, что режим работы аэротенков (нагрузка на ил, доза активного ила и др.) и величина показателей исходной дегидрогеназной активности и дегидрогеназной активности этого же образца ила со слабо концентрированным раствором (ДАИН2О) связаны между собой и зависят от нагрузки на ил по органическим веществам. Полученные результаты исследования могут быть использованы для контроля биологического процесса очистки сточных вод.The biological method of wastewater treatment is a comprehensive multicomponent process the activities of the enzyme system being the key component of it. It is known that dehydrogenases have been one of the most important enzymes the ensure the biological process. The complicated mechanism of the action of enzymes has not been fully described so far however, in the practice of monitoring biological treatment processes, an indicator of the dehydrogenase activity of sludge is used. The research results provided for supplementing the available information with actual data on the interdependence of the level of dehydrogenase activity of sludge and indicators of individual process parameters of biological treatment. It was shown that the mode of operation of aeration tanks (organic matter load on sludge, dose of activated sludge, etc.) and the values of the initial dehydrogenase activity and dehydrogenase activity of the same sludge sample with weakly concentrated solution (DASН2О) are interconnected and depend on the organic load on sludge. The results of the study can be used to control the biological process of wastewater treatment.The biological method of wastewater treatment is a comprehensive multicomponent process the activities of the enzyme system being the key component of it. It is known that dehydrogenases have been one of the most important enzymes the ensure the biological process. The complicated mechanism of the action of enzymes has not been fully described so far however, in the practice of monitoring biological treatment processes, an indicator of the dehydrogenase activity of sludge is used. The research results provided for supplementing the available information with actual data on the interdependence of the level of dehydrogenase activity of sludge and indicators of individual process parameters of biological treatment. It was shown that the mode of operation of aeration tanks (organic matter load on sludge, dose of activated sludge, etc.) and the values of the initial dehydrogenase activity and dehydrogenase activity of the same sludge sample with weakly concentrated solution (DASН2О) are interconnected and depend on the organic load on sludge. The results of the study can be used to control the biological process of wastewater treatment.

scholarly journals Integrated Approach for Wastewater Treatment and Biofuel Production in Microalgae Biorefineries

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2282
Author(s):  
Sanjeet Mehariya ◽  
Rahul Kumar Goswami ◽  
Pradeep Verma ◽  
Roberto Lavecchia ◽  
Antonio Zuorro
Keyword(s):  
Wastewater Treatment ◽  
Energy Demand ◽  
Energy Production ◽  
Effective Means ◽  
Integrated Approach ◽  
Biofuel Production ◽  
World Population ◽  
Treatment Processes ◽  
Current Scenario ◽  
Valuable Compounds

The increasing world population generates huge amounts of wastewater as well as large energy demand. Additionally, fossil fuel’s combustion for energy production causes the emission of greenhouse gases (GHG) and other pollutants. Therefore, there is a strong need to find alternative green approaches for wastewater treatment and energy production. Microalgae biorefineries could represent an effective strategy to mitigate the above problems. Microalgae biorefineries are a sustainable alternative to conventional wastewater treatment processes, as they potentially allow wastewater to be treated at lower costs and with lower energy consumption. Furthermore, they provide an effective means to recover valuable compounds for biofuel production or other applications. This review focuses on the current scenario and future prospects of microalgae biorefineries aimed at combining wastewater treatment with biofuel production. First, the different microalgal cultivation systems are examined, and their main characteristics and limitations are discussed. Then, the technologies available for converting the biomass produced during wastewater treatment into biofuel are critically analyzed. Finally, current challenges and research directions for biofuel production and wastewater treatment through this approach are outlined.

Modeling Mass Transfer in Biological Wastewater Treatment Processes

1986 ◽  
Vol 18 (6) ◽  
pp. 35-45 ◽  
Author(s):  
John C. Kissel
Keyword(s):  
Mass Transfer ◽  
Computer Simulation ◽  
Wastewater Treatment ◽  
Biological Treatment ◽  
Process Models ◽  
High Rate ◽  
Biological Wastewater Treatment ◽  
Trickling Filter ◽  
Treatment Processes ◽  
Individual Effects

Parameters characterizing intrasolid, liquid/solid, and gas/liquid mass transport phenomena in biological treatment systems are required if mass transfer is to be included in process models. Estimates of such parameters are presented and discussed. Collective and individual effects of mass transfer resistances are illustrated by computer simulation of a high-rate trickling filter.

scholarly journals Short investigation on occurrence and removal of semivolatiles during wastewater treatment processes

2021 ◽  
Vol 3 (2) ◽  
pp. 130-140
Author(s):  
Maria Diana Puiu ◽  
Keyword(s):  
Wastewater Treatment ◽  
Organic Contaminants ◽  
Biological Treatment ◽  
Organic Matter Content ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Matter Content ◽  
Physical Treatment ◽  
Dissolved Air Flotation ◽  
Treatment Processes

The food industry wastewater is known to present a high organic matter content, due to specific raw materials and processing activities. Even if these compounds are not directly toxic to the environment, high concentrations in effluents could represent a source of pollution as discharges of high biological oxygen demand may impact receiving river's ecosystems. Identifying the main organic contaminants in wastewater samples represents the first step in establishing the optimum treatment method. The sample analysis for the non-target compounds through the GC-MS technique highlights, along with other analytical parameters, the efficiency of the main physical and biological treatment steps of the middle-size Wastewater Treatment Plant (WWTP). Long-chain fatty acids and their esters were the main abundant classes of non-target identified compounds. The highest intensity detection signal was reached by n-hexadecanoic acid or palmitic acid, a component of palm oil, after the physical treatment processes with dissolved air flotation, and by 1-octadecanol after biological treatment.

scholarly journals Methanogenic Microorganisms in Industrial Wastewater Anaerobic Treatment

Processes ◽  
2020 ◽  
Vol 8 (12) ◽  
pp. 1546
Author(s):  
Monika Vítězová ◽  
Anna Kohoutová ◽  
Tomáš Vítěz ◽  
Nikola Hanišáková ◽  
Ivan Kushkevych
Keyword(s):  
Wastewater Treatment ◽  
Industrial Wastewater ◽  
Methanogenic Archaea ◽  
High Strength ◽  
Anaerobic Treatment ◽  
Microbiome Composition ◽  
Anaerobic Wastewater Treatment ◽  
The Past ◽  
Anaerobic Reactors ◽  
Anaerobic Environment

Over the past decades, anaerobic biotechnology is commonly used for treating high-strength wastewaters from different industries. This biotechnology depends on interactions and co-operation between microorganisms in the anaerobic environment where many pollutants’ transformation to energy-rich biogas occurs. Properties of wastewater vary across industries and significantly affect microbiome composition in the anaerobic reactor. Methanogenic archaea play a crucial role during anaerobic wastewater treatment. The most abundant acetoclastic methanogens in the anaerobic reactors for industrial wastewater treatment are Methanosarcina sp. and Methanotrix sp. Hydrogenotrophic representatives of methanogens presented in the anaerobic reactors are characterized by a wide species diversity. Methanoculleus sp., Methanobacterium sp. and Methanospirillum sp. prevailed in this group. This work summarizes the relation of industrial wastewater composition and methanogen microbial communities present in different reactors treating these wastewaters.

scholarly journals Combined Chemical-Biological Treatment of Effluents from Soil Remediation Processes by Surfactants Solutions Flushing

2012 ◽  
Vol 19 (1) ◽  
pp. 9-18 ◽  
Author(s):  
Elżbieta Hallmann ◽  
Renata Tomczak-Wandzel ◽  
Krystyna Mędrzycka
Keyword(s):  
Wastewater Treatment ◽  
Soil Remediation ◽  
Biological Treatment ◽  
Aerobic Degradation ◽  
Fenton Process ◽  
Cod Reduction ◽  
Treatment Processes ◽  
Oil In Water ◽  
Wastewater Samples ◽  
Surfactant Removal

Combined Chemical-Biological Treatment of Effluents from Soil Remediation Processes by Surfactants Solutions Flushing In recent years combined chemical-biological wastewater treatment processes have received increasing interest. In the present study wastewater from soil remediation processes were treated by means of 1-step processes like Fenton, aerobic degradation and 2-steps combined method. The effluents resulting from soil remediation processes consist of high surfactant concentration solutions, mobilized oils and oil-in-water (o/w) emulsions. The effectiveness of wastewater treatment was evaluated by COD reduction and surfactant removal. The application of Fenton process alone showed around 80% of COD and surfactant removal, and in case of aerobic process only 60% of COD and 50% of surfactant removal was accomplished. However, the maximum COD reduction and surfactant removal from wastewater samples, above 90%, was obtained in aerobic degradation with Fenton process as pretreatment. Thus, the Fenton process could be effectively applied as a pretreatment step to improve the reduction of both COD and surfactant from wastewater resulting from soil remediation.

Ozone and UV – a tool for multi-barrier concepts in water treatment

2006 ◽  
Vol 6 (4) ◽  
pp. 17-25 ◽  
Author(s):  
A. Ried ◽  
J. Mielcke
Keyword(s):  
Drinking Water ◽  
Wastewater Treatment ◽  
Activated Carbon ◽  
Water Treatment ◽  
Biological Treatment ◽  
Municipal Wastewater ◽  
Drinking Water Treatment ◽  
Additional Treatment ◽  
Municipal Wastewater Treatment ◽  
Treatment Processes

The use of ozone and/or UV for water treatment processes is often a combination of an ozone and/or UV-step with additional treatment steps, e.g. biological treatment, flocculation, filtration and activated carbon. Therefore, it is necessary to develop an optimized combination of these different steps. This article will demonstrate the advantages presenting two examples for drinking water treatment and two examples for municipal wastewater treatment.

scholarly journals Advances in Studies on Microbiota Involved in Nitrogen Removal Processes and Their Applications in Wastewater Treatment

2021 ◽  
Vol 12 ◽  
Author(s):  
Wenning Mai ◽  
Jiamin Chen ◽  
Hai Liu ◽  
Jiawei Liang ◽  
Jinfeng Tang ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Nitrogen Removal ◽  
Industrial Wastewater ◽  
Pollutant Removal ◽  
Engineering Technology ◽  
Removal Process ◽  
Treatment Processes ◽  
Initial Stage ◽  
Ecological Problems ◽  
Removal Processes

The discharge of excess nitrogenous pollutants in rivers or other water bodies often leads to serious ecological problems and results in the collapse of aquatic ecosystems. Nitrogenous pollutants are often derived from the inefficient treatment of industrial wastewater. The biological treatment of industrial wastewater for the removal of nitrogen pollution is a green and efficient strategy. In the initial stage of the nitrogen removal process, the nitrogenous pollutants are converted to ammonia. Traditionally, nitrification and denitrification processes have been used for nitrogen removal in industrial wastewater; while currently, more efficient processes, such as simultaneous nitrification-denitrification, partial nitrification-anammox, and partial denitrification-anammox processes, are used. The microorganisms participating in nitrogen pollutant removal processes are diverse, but information about them is limited. In this review, we summarize the microbiota participating in nitrogen removal processes, their pathways, and associated functional genes. We have also discussed the design of efficient industrial wastewater treatment processes for the removal of nitrogenous pollutants and the application of microbiome engineering technology and synthetic biology strategies in the modulation of the nitrogen removal process. This review thus provides insights that would help in improving the efficiency of nitrogen pollutant removal from industrial wastewater.

Sign in / Sign up

Export Citation Format

Share Document