scholarly journals Advancement of Khadi Textile: Textile Glummer of India

2019 ◽  
Vol 2 (2) ◽  
Author(s):  
M. Das ◽  
S. Basak
Keyword(s):  
Screen Printing ◽  
Low Cost ◽  
Fire Retardant ◽  
Natural Fibre ◽  
The Other ◽  
Synthetic Dyes ◽  
Mosquito Repellent ◽  
Value Addition ◽  
Special Effect ◽  
Printing Techniques

Khadi fabric is the textile glummer of India and has been started to use in India from at least ten decades ago (from 1920s). Normally it consist of cotton, wool, silk like natural fibre etc. and the concern fabric is made by hand made (by charka spinning technology) yarn and in the traditional handloom process. Normally, different kind of natural dyes (vegetable based, wastage material based, tannin based colour) and the eco-friendly synthetic dyes are used for the coloration of the khadi textile. In addition some traditional printing techniques like hand screen printing, block printing is used for the special effect on the khadi textile. Concerning the value addition, only stiff khadi fabric is marketed which is made by adding starch. However, some special low cost other value addition of the khadi fabric will make it more acceptable to the consumers of the India and also in the other countries. In this respect, bioactive based finish and the mosquito repellent khadi textile is very much important. This kind of functionality will make the fabric hygienic in terms of attack by deadly mosquitoes and also some harmful microorganisms. Apart from it, if it is possible to make UV protective and the fire retardant khadi textile, it will increase its popularity and also gain the socio economic importancy to the consumers and the handloom weavers of India and the other subcontinental countries.

Characterization on Surface Modification of Kenaf Biomass via Microbial Fermentation

2012 ◽  
Vol 576 ◽  
pp. 268-271 ◽  
Author(s):  
M.I. Ahmad Fitrie ◽  
Hazleen Anuar ◽  
M.N. Nur Aisyah ◽  
M.N. Nur Aimi ◽  
Seeni Mohamed Nurhafizah ◽  
...  
Keyword(s):  
Surface Modification ◽  
Low Cost ◽  
Chemical Properties ◽  
Natural Fibre ◽  
The Other ◽  
Microbial Fermentation ◽  
Low Density ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

Kenaf is categorized as one of the natural fibre which is used as replacement to man-made fibre due to its various advantages. It is a natural fibre of low density, low cost, recyclable and biodegradable. This paper presents the surface modification of kenaf biomass in terms of its morphology, chemical properties and crystallinity, as observed under scanning electron microscope (SEM), Fourier transform infrared (FTIR) and X-ray diffraction (XRD), respectively. Peak at 1600 cm-1 to 1200 cm-1 FTIR shows the disappearance of lignin in the treated kenaf. On the other hand, crystallinity indexes (CI) for untreated and treated kenaf are determined by XRD that show 83.3 % and 67.7 % accordingly.

scholarly journals Implementation of Radiating Elements for Radiofrequency Front-Ends by Screen-Printing Techniques for Internet of Things Applications

Sensors ◽  
2019 ◽  
Vol 19 (16) ◽  
pp. 3626 ◽  
Author(s):  
Imanol Picallo ◽  
Hicham Klaina ◽  
Peio Lopez-Iturri ◽  
Aitor Sánchez ◽  
Leire Méndez-Giménez ◽  
...  
Keyword(s):  
Internet Of Things ◽  
Screen Printing ◽  
Low Cost ◽  
Cost Effective ◽  
Wireless Transceivers ◽  
Test Environment ◽  
Angular Deflection ◽  
Wide Range ◽  
Flexible Antenna ◽  
Printing Techniques

The advent of the Internet of Things (IoT) has led to embedding wireless transceivers into a wide range of devices, in order to implement context-aware scenarios, in which a massive amount of transceivers is foreseen. In this framework, cost-effective electronic and Radio Frequency (RF) front-end integration is desirable, in order to enable straightforward inclusion of communication capabilities within objects and devices in general. In this work, flexible antenna prototypes, based on screen-printing techniques, with conductive inks on flexible low-cost plastic substrates is proposed. Different parameters such as substrate/ink characteristics are considered, as well as variations in fabrication process or substrate angular deflection in device performance. Simulation and measurement results are presented, as well as system validation results in a real test environment in wireless sensor network communications. The results show the feasibility of using screen-printing antenna elements on flexible low-cost substrates, which can be embedded in a wide array of IoT scenarios.

Opening up a New Field of Modern Medical Research 1

2020 ◽  
Author(s):  
Xiaoguang Li
Keyword(s):  
Chinese Medicine ◽  
Traditional Chinese Medicine ◽  
Human Body ◽  
Low Cost ◽  
Acupuncture Point ◽  
Modern Medicine ◽  
Body Structure ◽  
Special Effect ◽  
Special Knowledge ◽  
Opening Up

Modern medicine tells us that the human body is an organism composed of heart, lung, liver, kidney, spleen, stomach, brain, nerves, muscles, bones, blood vessels, blood and so on, while traditional Chinese medicine believes that besides these tissues and organs, the human body still has another part of the structure, traditional Chinese medicine calls them Jing Luo and Shu Xue. Jing Luo means the longitudinal line of the human body and the accompanying net, translated into English Meridians and Collaterals. Shu Xue means holes distributed on Jing Luo and outside Jing Luo, because stimulating Shu Xue's position by acupuncture, massage and other methods can cure diseases, so Shu Xue is translated into English acupuncture point, abbreviated as acupoint or point. Meridians and acupoints are the special knowledge of human body structure in traditional Chinese medicine. Traditional Chinese medicine not only draws the distribution map of the meridians and acupoints in the human body, but also has been using them to treat diseases for thousands of years. There are hundreds of these acupoints, stimulating each one by acupuncture, massage or other methods will have a special effect on the human body and can treat various diseases. But what effect does stimulating every acupoint have on the human body so that it can treat various diseases? The discussion of traditional Chinese medicine is vague and incomprehensible, and can not be proved by experiments. According to the author's research for more than 30 years, this paper makes a clear and accurate exposition of the effects on the human body and diseases that can be treated with acupoint massage. These statements can be proved by experiments, so they are believed to be reliable. It is hoped that meridians, acupoints and massage therapy can be incorporated into modern medicine and become a part of modern medicine after being proved by others through experiments. Massaging acupoints can not only treat many diseases that are difficult to be treated with drugs, but also have simple methods and low cost.

The Tradition of Religious Books (Kitabs) Printing: Case Study of the Production and Reproduction of Religious Books (Kitabs) in Cianjur and Sukabumi, West Java, Indonesia

2020 ◽  
Vol 17 (2) ◽  
pp. 291-320
Author(s):  
Asep Saefullah
Keyword(s):  
Data Collection ◽  
Screen Printing ◽  
The Other ◽  
West Java ◽  
Simple Method ◽  
Original Essays ◽  
Printed Books ◽  
Religious Books ◽  
Living Tradition

Tulisan ini membahas fenomena penyebaran kitab-kitab cetak keaga­maan di Jawa Barat, khususnya di Sukabumi dan Cianjur. Jenis kitab ini biasanya menggunakan tulisan Arab dengan bahasa Sunda dan menggu­nakan aksara Pegon. Kitab-kitab cetak dari jenis-jenis itu diproduksi dan direproduksi, dan masih digunakan sampai hari ini. Oleh karena itu, fenomena ini dapat disebut sebagai “living tradition”. Pengumpulan data dilakukan dengan melacak dan merekam kitab-kitab yang diproduksi (disalin atau dikarang) dan direproduksi (dicetak atau digandakan) dengan metode seder­hana, yakni fotocopi dan pencetakan tradisional seperti stensil, sablon, dan "cetak toko". Tulisan ini bertujuan untuk memetakan dan merevisi kategorisasi kitab-kitab tersebut dari kajian terdahulu berdasarkan jenis karya, seperti karangan asli, tuqilan, terjemahan, syarḥ (penjelasan), khulasah (ringkasan) yang lain, dan juga berdasarkan bahasa dan aksara yang digunakan. Selain itu, tulisan ini juga mengamati lembaga-lembaga atau individu-individu yang masih mereproduksi buku-buku (kitab-kitab) keagamaan sederhana seperti perusahaan percetakan atau pesantren yang menerbitkan kitab-kitab tersebut. Pada akhir artikel ini, ada beberapa saran dalam upaya untuk melestarikan kitab-kitab cetak dan karya-karya tersebut.Kata kunci: kitab, jenis karya, pencetakan tradisional, Sunda, Pegon, Jawa Barat This paper discusses the phenomenon of the spreading of religious printed books (kitabs) in West Java, especially in Sukabumi and Cianjur, which are characterized by the use of Arabic writing in Sundanese (or known as Pegon script). The printed books (Kitabs) of those types are produced and reproduced, and are still used to this day. Therefore, this phenomenon can be called as a “living tradition”. Data collection was conducted by tracing and recording religious books (kitabs) that are pro-duced (rewritten or compossed) and reproduced (printed or duplicated) with a simple method, known as photocopying and traditional printing such as stencils, screen printing, and “shop printing”. This paper aims to map and revise the categorization of these Kitabs from previous studies based on the types of works including original essays, tuqilan (quotations), translation, sharh (explanation), khulaṣah (summary), or the other, and also based on the language and the script used. In addition, this paper also observes the institutions or individuals that are still reproducing these printed religious books such as the printing company or pesantren that publish such kitabs. At the end of this article, there are some suggestions in attempts to preserve those printed kitabs and the works.Keywords: Kitabs, type of work, traditional printing, Sunda, Pegon, West Java

SAE 1039

Alloy Digest ◽  
1977 ◽  
Vol 26 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Low Cost ◽  
Manganese Content ◽  
Heat Treating ◽  
General Purpose ◽  
Carbon Steels ◽  
The Other ◽  
Steel Mills ◽  
Medium Strength ◽  
Hot Rolled

Abstract SAF 1039 steel can be used in the hot-rolled, normalized, oil-quenched-and-tempered or water-quenched-and-tempered condition for general-purpose construction and engineering. Its manganese content is a little higher than some of the other standard carbon steels with comparable carbon levels; this gives it slightly higher hardenability and hardness. It provides medium strength and toughness at low cost. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: CS-66. Producer or source: Carbon steel mills.

Using Low Temperature, Cost-effective and Green Methods to Carbon Nanohorn Synthesis

2019 ◽  
Vol 9 (2) ◽  
pp. 157-160
Author(s):  
Ali Hasani
Keyword(s):  
Laser Ablation ◽  
Melting Point ◽  
Palm Olein ◽  
Arc Discharge ◽  
Low Cost ◽  
The Other ◽  
High Yield ◽  
Reaction Field ◽  
Carbon Nanohorns ◽  
Graphite Rod

Background: Laser ablation method has high-yield and pure SWCNHs. On the other hand, arc discharge methods have low-cost production of SWCNHs. However, these techniques have more desirable features, they need special expertness to use high power laser or high current discharge that either of them produces very high temperature. As for the researches, the temperatures of these techniques are higher than 4727°C to vaporize the graphite. So, to become aware of the advantages of SWCNHs, it is necessary to find a new way to synthesize SWCNHs at a lower temperature. In other words, reaction field can be expandable at a moderate temperature. This paper reports a new way to synthesize SWCNHs at an extremely reduced temperature. Methods: According to this study, the role of N2 is the protection of the copper holder supporting the graphite rod by increasing heat transfer from the holder. After the current of 70 A was supplied to the system, the temperature of graphite rod was raised to 1600°C. It is obvious that this temperature is somehow higher than the melting point of palladium, 1555°C, and much lower than graphite melting point, 3497°C. Results: Based on the results, there are transitional precursors simultaneous with the SWCNHs. This composition can be created by distortion of the primary SWCNTs at the higher temperature. Subsequently, each SWCNTs have a tendency to be broken into individual horns. With increasing the concentration of the free horns, bud-like SWCNHs can be produced. Moreover, there are individual horns almost separated from the mass of single wall carbon nanohorns. This structure is not common in SWCNHs synthesized by the usual method such as arc discharge or laser ablation. Through these regular techniques, SWCNHs are synthesized as cumulative particles with diameters about 30-150 nm. Conclusion: A simple heating is needed for SWCNTs transformation to SWCNHs with the presence of palladium as catalyst. The well-thought-out mechanism for this transformation is that SWCNTs were initially changed to highly curled shape, and after that were formed into small independent horns. The other rout to synthesize SWCNHs is the pyrolysis of palm olein at 950°C with the assistance of zinc nitrate and ferrocene. Palm olein was used as a promising, bio-renewable and inexpensive carbon source for the production of carbon nanohorns.

scholarly journals A Local Oscillator Phase Compensation Technique for Ultra-Wideband Stepped-Frequency Continuous Wave Radar Based on a Low-Cost Software-Defined Radio

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 780
Author(s):  
Kazunori Takahashi ◽  
Takashi Miwa
Keyword(s):  
Software Defined Radio ◽  
Initial Phase ◽  
Continuous Wave ◽  
Low Cost ◽  
Local Oscillator ◽  
The Other ◽  
Ultra Wideband ◽  
Single Frequency ◽  
Wave Radar ◽  
Stepped Frequency

The paper discusses a way to configure a stepped-frequency continuous wave (SFCW) radar using a low-cost software-defined radio (SDR). The most of high-end SDRs offer multiple transmitter (TX) and receiver (RX) channels, one of which can be used as the reference channel for compensating the initial phases of TX and RX local oscillator (LO) signals. It is same as how commercial vector network analyzers (VNAs) compensate for the LO initial phase. These SDRs can thus acquire phase-coherent in-phase and quadrature (I/Q) data without additional components and an SFCW radar can be easily configured. On the other hand, low-cost SDRs typically have only one transmitter and receiver. Therefore, the LO initial phase has to be compensated and the phases of the received I/Q signals have to be retrieved, preferably without employing an additional receiver and components to retain the system low-cost and simple. The present paper illustrates that the difference between the phases of TX and RX LO signals varies when the LO frequency is changed because of the timing of the commencement of the mixing. The paper then proposes a technique to compensate for the LO initial phases using the internal RF loopback of the transceiver chip and to reconstruct a pulse, which requires two streaming: one for the device under test (DUT) channel and the other for the internal RF loopback channel. The effect of the LO initial phase and the proposed method for the compensation are demonstrated by experiments at a single frequency and sweeping frequency, respectively. The results show that the proposed method can compensate for the LO initial phases and ultra-wideband (UWB) pulses can be reconstructed correctly from the data sampled by a low-cost SDR.

scholarly journals Effects of water absorption on the mechanical properties of hybrid natural fibre/phenol formaldehyde composites

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Sekar Sanjeevi ◽  
Vigneshwaran Shanmugam ◽  
Suresh Kumar ◽  
Velmurugan Ganesan ◽  
Gabriel Sas ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Impact Strength ◽  
Water Absorption ◽  
Hybrid Composites ◽  
Phenol Formaldehyde ◽  
Natural Fibre ◽  
The Other ◽  
Fibre Reinforcement ◽  
Dry Conditions

AbstractThis investigation is carried out to understand the effects of water absorption on the mechanical properties of hybrid phenol formaldehyde (PF) composite fabricated with Areca Fine Fibres (AFFs) and Calotropis Gigantea Fibre (CGF). Hybrid CGF/AFF/PF composites were manufactured using the hand layup technique at varying weight percentages of fibre reinforcement (25, 35 and 45%). Hybrid composite having 35 wt.% showed better mechanical properties (tensile strength ca. 59 MPa, flexural strength ca. 73 MPa and impact strength 1.43 kJ/m2) under wet and dry conditions as compared to the other hybrid composites. In general, the inclusion of the fibres enhanced the mechanical properties of neat PF. Increase in the fibre content increased the water absorption, however, after 120 h of immersion, all the composites attained an equilibrium state.

scholarly journals Development and Characterization of a Novel Low-Cost Water-Level and Water Quality Monitoring Sensor by Using Enhanced Screen Printing Technology with PEDOT:PSS

Micromachines ◽  
2020 ◽  
Vol 11 (5) ◽  
pp. 474 ◽  
Author(s):  
Bei Wang ◽  
Manuel Baeuscher ◽  
Xiaodong Hu ◽  
Markus Woehrmann ◽  
Katharina Becker ◽  
...  
Keyword(s):  
Water Quality ◽  
Water Level ◽  
Sheet Resistance ◽  
Screen Printing ◽  
Low Cost ◽  
Conductive Polymer ◽  
Water Quality Monitoring ◽  
Physical Treatment ◽  
Printing Technology ◽  
Screen Printing Technology

A novel capacitive sensor for measuring the water-level and monitoring the water quality has been developed in this work by using an enhanced screen printing technology. A commonly used environment-friendly conductive polymer poly(3,4-ethylenedioxythiophene):poly (styrenesulfonate) (PEDOT:PSS) for conductive sensors has a limited conductivity due to its high sheet resistance. A physical treatment performed during the printing process has reduced the sheet resistance of printed PEDOT:PSS on polyethylenterephthalat (PET) substrate from 264.39 Ω/sq to 23.44 Ω/sq. The adhesion bonding force between printed PEDOT:PSS and the substrate PET is increased by using chemical treatment and tested using a newly designed adhesive peeling force test. Using the economical conductive ink PEDOT:PSS with this new physical treatment, our capacitive sensors are cost-efficient and have a sensitivity of up to 1.25 pF/mm.

A comparative study of qualitative immunochemical screening assays for the combined measurement of T-2/HT-2 in cereals and cereal-based products

2011 ◽  
Vol 4 (4) ◽  
pp. 385-394 ◽  
Author(s):  
J. Meneely ◽  
F. Ricci ◽  
S. Vesco ◽  
M. Abouzied ◽  
M. Sulyok ◽  
...  
Keyword(s):  
Sample Preparation ◽  
Low Cost ◽  
Ease Of Use ◽  
The Other ◽  
Accuracy And Precision ◽  
Cost Implications ◽  
Electrochemical Array ◽  
The Cost ◽  
Preparation Techniques ◽  
Speed Of Analysis

Many different immunochemical platforms exist for the screening of naturally occurring contaminants in food from the low cost enzyme linked immunosorbent assays (ELISA) to the expensive instruments such as optical biosensors based on the phenomenon of surface plasmon resonance (SPR). The primary aim of this study was to evaluate and compare a number of these platforms to assess their accuracy and precision when applied to naturally contaminated samples containing HT-2/T-2 mycotoxins. Other important factors considered were the speed of analysis, ease of use (sample preparation techniques and use of the equipment) and ultimately the cost implications. The three screening procedures compared included an SPR biosensor assay, a commercially available ELISA and an enzymelinked immunomagnetic electrochemical array (ELIME array). The qualitative data for all methods demonstrated very good overall agreements with each other, however on comparison with mass spectrometry confirmatory results, the ELISA and SPR assay performed slightly better than the ELIME array, exhibiting an overall agreement of 95.8% compared to 91.7%. Currently, SPR is more costly than the other two platforms and can only be used in the laboratory whereas in theory both the ELISA and ELIME array are portable and can be used in the field, but ultimately this is dependent on the sample preparation techniques employed. Sample preparative techniques varied for all methods evaluated, the ELISA was the most simple to perform followed by that of the SPR method. The ELIME array involved an additional clean-up step thereby increasing both the time and cost of analysis. Therefore in the current format, field use would not be an option for the ELIME array. In relation to speed of analysis, the ELISA outperformed the other methods.

Sign in / Sign up

Export Citation Format

Share Document