scholarly journals Investigation of Fuel Properties of Tea Seed Oil Biodiesel and Diesel Fuel Mixture

Author(s):  
Fatih AYDIN ◽  
Sena ÇALIŞKAN
Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5597
Author(s):  
Michal Obergruber ◽  
Vladimír Hönig ◽  
Jan Jenčík ◽  
Jiří Hájek ◽  
Dominik Schlehöfer ◽  
...  

In this paper, the fuel properties of mixtures of diesel fuel and ethanol and diesel fuel and butanol in the ratio of 2.5% to 30% were investigated. The physicochemical properties of the blends such as the cetane number, cetane index, density, flash point, kinematic viscosity, lubricity, CFPP, and distillation characteristics were measured, and the effect on fuel properties was evaluated. These properties were compared with the current EN 590+A1 standard to evaluate the suitability of the blends for use in unmodified engines. The alcohols were found to be a suitable bio-component diesel fuel additive. For most physicochemical properties, butanol was found to have more suitable properties than ethanol when used in diesel engines. The results show that for some properties, a butanol–diesel fuel mixture can be mixed up to a ratio of 15%. Other properties would meet the standard by a suitable choice of base diesel.


2018 ◽  
Vol 24 (1) ◽  
pp. 53-59
Author(s):  
Jong Min Kim ◽  
Seon Kyeong Park ◽  
Jin Yong Kang ◽  
Seong-kyeong Bae ◽  
Ga-Hee Jeong ◽  
...  

2014 ◽  
Vol 3 (10) ◽  
pp. 3419
Author(s):  
Mohan Reddy Nalabolu* ◽  
Varaprasad Bobbarala ◽  
Mahesh Kandula

At the present moment worldwide waning fossil fuel resources as well as the tendency for developing new renewable biofuels have shifted the interest of the society towards finding novel alternative fuel sources. Biofuels have been put forward as one of a range of alternatives with lower emissions and a higher degree of fuel security and gives potential opportunities for rural and regional communities. Biodiesel has a great potential as an alternative diesel fuel. In this work, biodiesel was prepared from waste cooking oil it was converted into biodiesel through single step transesterification. Methanol with Potassium hydroxide as a catalyst was used for the transesterification process. The biodiesel was characterized by its fuel properties including acid value, cloud and pour points, water content, sediments, oxidation stability, carbon residue, flash point, kinematic viscosity, density according to IS: 15607-05 standards. The viscosity of the waste cooking oil biodiesel was found to be 4.05 mm2/sec at 400C. Flash point was found to be 1280C, water and sediment was 236mg/kg, 0 % respectively, carbon residue was 0.017%, total acid value was 0.2 mgKOH/g, cloud point was 40C and pour point was 120C. The results showed that one step transesterification was better and resulted in higher yield and better fuel properties. The research demonstrated that biodiesel obtained under optimum conditions from waste cooking oil was of good quality and could be used as a diesel fuel.


Sign in / Sign up

Export Citation Format

Share Document