scholarly journals Study of influence of the charge granulometric composition on the quality of burned anodes

Author(s):  
A.S Akizhayeva ◽  

Many factors affect the quality of produced anodes: composition and grade of raw materials, recipe, technology, operating parameters, the granulometric composition of charge materials etc. The most significant influence is from the last factor. The article provides research results on the effect of fine fractions on the quality of anodes. The research object is charge of different granulometric composition used to produce anodes at the Kazakhstan Electrolysis plant in Pavlodar. Six types of anode mass with different granulometric composition were prepared for the experiment. The anode mass was made of petroleum coke, pitch, recycled anodes, and dust from filters and grinder produced during coke treatment. Several properties of the specimens were studied. In total, six specimens were made and, specimen № 4 drew particular attention. Its granulometric composition is as following: coarse fractions – 25 %, medium fractions – 20%, fine fractions (grinder dust) – 50 %, and filter dust – 5 %. The results showed that some specifications of anodes, like gas permeability and apparent density that affect anode consumption, are improved as the fineness of dust grinding. For instance, the addition of dust fraction in the charge increases anode density from 1.542 to 1.639 kilogram per cubic decimeters and decreases gas permeability from 1.01 to 0.78 nPm. In addition, the presence of dust fraction minimizes the porosity of the anode block. The results of the investigation help adjust the optimal recipe of anode mass to obtain high-quality anodes.

Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.


2021 ◽  
Vol 1028 ◽  
pp. 365-370
Author(s):  
Diba G Auliya ◽  
Soni Setiadji ◽  
Zulfi Mofa Agasa ◽  
Fitrilawati ◽  
Norman Syakir ◽  
...  

Polydimethylsiloxane (PDMS) has been widely used as a vitreous humour substitution in vitreoretinal surgery. Due to its limited availability and increasing domestic needs, the price of PDMS in Indonesia became very expensive. Previously, we reported the synthesized of PDMS from a high grade of monomer of 98% of Octamethylcyclotetrasiloxane (D4) and found that all PDMS samples produced high quality samples similar to that of commercial one. However, by considering the ease of obtaining raw materials and also the production costs, the synthesis of PDMS using monomer which easy to be found in Indonesia and low production costs is needed to be developed. Here, we reported the synthesis of PDMS using low grade of 96% of D4 in order to produce high quality of PDMS with low viscosity that can be used for vitreous humous substitution in vitreoretinal surgery. PDMS samples with low viscosity value of 0.94-1.35 Pa.s have been successfully synthesized from low grade of D4 and MM using ring-opening polymerization method. The yields of PDMS resulted in this research were in the range between 67.27% and 76.26%. From FTIR spectroscopy, it is found that all synthesized samples have structure and functional groups similar to PDMS using high grade of monomer of 98% Octamethylcyclotetrasiloxane (D4). From refractometer and surfgauge measurements, all samples have refractive index in the range of 1,4034-1,4040 and the value surface tension was 21 m.N/m.


2021 ◽  
Vol 5 (2) ◽  
pp. 714-722
Author(s):  
Noverita Sprinse Vinolina ◽  
Antonio Marro Sipayung ◽  
Dardanila ◽  
Sondang Pintauli

This program is conducted to assist Siponjot Village while empowering the people of Siponjot Village to be able to utilize and maximize the benefit of the village forest. Village forest might support the availability of raw materials required for making musical instruments, such as high quality of wood, including how to process wood waste from making musical instruments to be used as creative souvenirs and improve the economic value. The raw material for production determined its results of the production of wood-based musical instruments. Thus, in order to produce a high quality tanginang, hasapi, and gondang, which previously began to be produced by arts crafts in the Sitangkubang area of ​​Siponjot Village, a high quality of raw materials is needed. The community service team surveyed the location of planting seeds for village forest restoration, provided socialization related to the importance of village forest cultivation and the suitability of the Siponjot Village area for the cultivation of these plants. Village forest restoration aims to maintain the beauty and beauty of the village. Implementation of village reforestation activities starting from socializing forest tourism and the strength of village forests to the community, followed by a discussion about village forest management and its economic benefits. Handover of a thousand units of forest plant seedlings given to the villagers of Siponjot as part of the forest restoration program in the area.


2020 ◽  
Vol 117 (1) ◽  
pp. 108 ◽  
Author(s):  
Bing Dai ◽  
Hong-ming Long ◽  
Yong-cai Wen ◽  
Yi-long Ji ◽  
Yun-cai Liu

This article has reviewed the production status, total reductant consumption, raw materials and operation principle indexes of large blast furnaces in China from 2015 to 2016. The developing actuality of Chinese large BFs has been quantitatively analyzed and the existing problems have been proposed clearly. Based on that, maintaining production stable, enhancing the quality of raw materials and improving the operation principles are suggested. Large BFs take advantages of high-quality hot metal, energy saving, cost-cutting, high mechanization and automation levels and are sufficient to meet the challenges of economic crisis, environmental pressure and security risk form the future. Thus, the number of large BFs in China will continue to increase in the future.


2020 ◽  
Vol 161 ◽  
pp. 01056
Author(s):  
Magomed Akhmetov ◽  
Amiiat Demirova ◽  
Vladimir Piniaskin ◽  
R.A. Rakhmanova

Perfection of technological processes, both in preliminary preparation of raw materials and during the final mandatory step of pasteurization, plays a key role in ensuring the quality of finished products, which is important in the production of canned dietary products. The aim of the research was to develop a more efficient way of blanching raw materials with its hardware and soft pasteurization modes, which will allow the production of high quality and competitive compotes for functional nutrition. We have developed and proposed a method of pulse-steam blanching of raw materials directly in glass jars with saturated water vapor, instead of the traditional method using hot water. The essence of the method is as follows. Fruits stacked in jars are pulse heated for 100–160 seconds (depending on the volume of the container) with saturated water vapor with temperature of 105–110 °C, and then fed into jars with cycles of 10 and 10 seconds respectively. The use of pulsed supply of saturated water vapor contributes to achieving more even heating of the fruit, which are characterized by a relatively large internal thermal resistance, causing overheating of the surface layers, and also provides an increase in the temperature of the product, which allows to pour into the jars syrup at relatively high temperature (97–98 °C), while the traditional technology accounts for the temperature of only 80–85 °C. Implementation of this method ensures the temperature level of the product entering the pasteurization stage being 78–80 °C, as opposed to the traditional method, where the temperature of the product is 45–48 °C. After that, the jars will be filled with syrup with a temperature of 97–98 °C, sealed and sent for pasteurization on accelerated modes. To implement the new method of blanching, the design of the device for pulse-steam blanching of fruits in glass jars has been developed. New thermal sterilization regimes have been developed, taking into account the increased temperature of the product after sealing and improved technology for the production of pear compote. The results of physical and chemical testing confirm the high quality of the finished product.


2020 ◽  
Vol 1 (1) ◽  
pp. 95-102
Author(s):  
Felicia Tutulescu ◽  
Aurel Popa

The Dragasani vineyard is one of the most ancient existing in Romania being famous for obtaining red and white wines of the highest quality. The present study has performed during five years (2005-2009), focusing on the anthocyanin profiles of the autochthonous Novac grapevine cultivar, in comparison with Cabernet Sauvignon cultivar which, also provides wines of high quality. The obtained results put into evidence, a special potential and chromatic structure in case of the grapes and wines characteristics for these autochthonous cultivars, which are very closed to those shown by the Cabernet Sauvignon. For all the cultivars studied, the amounts of cationical flavidium within the anthocyanin matter do keep continuously was growing, while acidity decreased and glucides was accumulated. However, at some moment, these synthesis indices of the cromatical structure’s quality begin to decline. Depending of the viticultural year it is the genetical nature of the respective anthocyanin pigments to differentiate through the involvements of each of the 3 categories of pigments (yellow, red or blue). During the wine’s evolution (maturation and aging), due to the modification of its cromatical structure, the ratio between the yellow and red pigments does confer to the wine a colour nuance which continues to increase, significantly improving the wine’s visual attraction. For the autochthonous grapevine cultivars for red wines, their antocyanins potential their respective qualities do enable us to state that on the basis of the quality of the raw materials, wine types of high qualities could be created, being so endowed that they could bear as well an origin denomination.


2018 ◽  
Vol 64 ◽  
Author(s):  
N.V. Bespalova ◽  
M.M. Gomola ◽  
T.I. Yakovleva

The article is devoted to the urgent theoretical and practical problems of the quality control of the chocolate confectionery products in cafes and restaurants. The authors analyze the modern approaches to the quality control of the chocolate confectionery products. The practical recommendations can be useful for the process of selection of the high quality raw materials. The criteria for the quality control of the chocolate confectionery products have been given. Some ways to improve the quality of he chocolate confectionery products have been discussed.


2020 ◽  
Author(s):  
Aleksander Litovchenko

The book presents the path of production development of honey wine, from the times of Kievan Rus to the present. A deep analysis of culture, honey winemaking, one of the best in its time in world practice, shows what heights were achieved, and how more than a century ago this art was lost. There were many different unsubstantiated sentences, primitive literature, in no way restoring the glory of our great ancestors and not meeting modern requirements for making wines in general. In the last century, as in the entire post-Soviet space, and in Ukraine, the use of honey in winemaking was prohibited and there were ao standard documents on its use for this purpose. The author, with the support of the country's government, while fulfilling the task of the Cabinet of Ministers of Ukraine to improve the quality of fruit and berry wines, produced at that time, it was possible to convince the country's leadership of the need to use honey for the preparation of high-quality honey fruit and berry wines. For this purpose, technical conditions TUU 202.13.022-99 were proposed, developed, and approved "Fruit and berry dessert wines with aromatic additives", where, in addition to the use of fruit and berry, spicy, aromatic, and medicinal raw materials, the use of honey was first laid. For the first time according to TUU, a number of honey wines were developed, approved, and mastered in produccion. At international competicions, such wines have received the highest awards, gold medals, and Grand Prix cups. Subsequently, with the participation of the largest scientific centers, GOST (DSTU 6036: 2008) was prepared. Fruit and berry wines, general technical conditions, in which the production of honey wines arc separated into another group. These regulatory documents fully regulate the production, release, and quality control of honey wines in Ukraine. The author offers a broad overview of the basic terrns and designations necessary for the production of high-quality fruit and berry honey wines. Provides and explains the modem requirements for the classification of honey wines, measures on safety, sanitation, and hygiene are seriously discussed, analyzes the main conditions and factors that detennine the quality of the necessary components, and the preparation of honey wines in general. Since honey wines can only be prepared using fruit and berry wines, including grape juices, the book provides the necessary overview in the processing of fruits, berries, grapes, the reception and quality control of raw materials, and the preparation of juices. Very important and inforrnative material is presented in the chapters on the selection and procurement of honey, for the preparation of honey fruit and berry and honey grape wines. Important sections on the impact of wine on the health and culn,re of wine consumption. The most common diseases and disadvantages of honey wines are described. A very informative and impressive list of honey wines, first developed in Ukraine under the guidance of the author, professor, doctor, technical sciences, Laureate of the State Prize of Ukraine in the field of science and technology Litovchentko A.M., in the amount of 48 items, practically from all raw materials available in Ukraine. To facilitate the work on the preparation of high-quality honey wines, 12 additional applications are presented, providing the main technological process of production. The book is of important practical, theoretical, and scientific interest.


Land Science ◽  
2020 ◽  
Vol 2 (2) ◽  
pp. p1
Author(s):  
Rashidova R K ◽  
Kurbanov Abdirakhim Ahmedovich ◽  
Aliyev T ◽  
Jiyanov A B ◽  
Turdieva O J ◽  
...  

This paper presents the results of the analysis of the quality of basalts, their heat treatment and studies of changes in the chemical composition of basalts, which leads to a change in the external color of partially processed basalt raw materials (hereinafter referred to as semi-finished product). The results of a study of purified basalt from slime, impurities and hydroxides, changes in the chemical composition of basalt rock are presented. The prospects of heat treatment of a semi-finished product and obtaining multi-colored products from mineral raw materials is shown. It was found that the optimal firing temperature of the semi-finished product, the possible options for changing the external color and the criterion points of the thermal effect at which the basalt semi-finished product changes the external shade. These statements are of great scientific and practical interest in the fact that during the heat treatment of a semifinished product, basalt easily overheats and gradually acquires a different color, which occurs to a liquids temperature and allows the future to plan to obtain high-quality multi-colored products from basalts, for example, products for design.


World Science ◽  
2020 ◽  
Vol 1 (4(56)) ◽  
pp. 45-47
Author(s):  
Бералиева Э. Б. ◽  
Керимбек Ж. С.

The article discusses the ways to solve the problems of low levels of active biological substances in the bakery product, with medicinal properties. In the process of the preparation of buns, the optimal dosages of the additives were calculated in order to determine an acceptable ratio of vegetable raw materials components and expand the range of bakery products with therapeutic and prophylactic effects. The article proposes new recipe for making buns with the addition of herbal additives such as stevia and licorice root. In addition, the study was conducted on the influence of licorice root and stevia additives on the rheological properties of the dough and the quality of the finished product. As a result, high-quality buns with the necessary consumer properties were obtained.


Sign in / Sign up

Export Citation Format

Share Document