scholarly journals Heat Processing and Change of Proper Indicators of Basalts

Land Science ◽  
2020 ◽  
Vol 2 (2) ◽  
pp. p1
Author(s):  
Rashidova R K ◽  
Kurbanov Abdirakhim Ahmedovich ◽  
Aliyev T ◽  
Jiyanov A B ◽  
Turdieva O J ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Chemical Composition ◽  
Raw Materials ◽  
Practical Interest ◽  
Heat Processing ◽  
High Quality ◽  
Mineral Raw Materials ◽  
Different Color ◽  
Basalt Rock

This paper presents the results of the analysis of the quality of basalts, their heat treatment and studies of changes in the chemical composition of basalts, which leads to a change in the external color of partially processed basalt raw materials (hereinafter referred to as semi-finished product). The results of a study of purified basalt from slime, impurities and hydroxides, changes in the chemical composition of basalt rock are presented. The prospects of heat treatment of a semi-finished product and obtaining multi-colored products from mineral raw materials is shown. It was found that the optimal firing temperature of the semi-finished product, the possible options for changing the external color and the criterion points of the thermal effect at which the basalt semi-finished product changes the external shade. These statements are of great scientific and practical interest in the fact that during the heat treatment of a semifinished product, basalt easily overheats and gradually acquires a different color, which occurs to a liquids temperature and allows the future to plan to obtain high-quality multi-colored products from basalts, for example, products for design.

TECHNOLOGICAL ASPECTS OF HIGH QUALITY RAW MATERIAL OBTAINING FOR PECTIN PRODUCTION

1970 ◽  
pp. 47-50
Author(s):  
I. A. Ilina ◽  
I. A. Machneva ◽  
E. S. Bakun
Keyword(s):  
Raw Materials ◽  
Thermal Characteristics ◽  
Environmental Safety ◽  
Raw Material ◽  
High Quality ◽  
Temperature Conductivity ◽  
Drying Temperature ◽  
Plant Raw Materials ◽  
Gel Forming Ability

  The article is devoted to the study of the chemical composition, physical and thermal-pfysical characteristics of damp apple pomaces and the identifying patterns of influence of drying temperature the functional composition and gel-forming ability of pectin. The research is aimed at obtaining initial data for the subsequent calculation of the main technological, hydro-mechanical, thermal, structural and economic characteristics of devices for drying the plant raw materials, ensuring the environmental safety and high quality of pectin-containing raw materials, the reducing heat and energy costs. As a result of the study of the thermal characteristics of apple pomaces, the critical points (temperature conductivity – 16.5 x 10-8 m2/s, thermal conductivity – 0.28 W/m K, heat capacity – 1627 j/(kg K)) at a humidity of 56 % are determined, which characterizing the transition from the extraction of weakly bound moisture to the extraction of moisture with strong bonds (colloidal, adsorption). It was found that the pomaces obtained from apples of late ripening have a higher content of solids (21-23 %), soluble pectin and protopectin (2.5-4.5 %). Dried pomaces obtained from apple varieties of late ripening contain up to 25 % pectin, which allow us to recommend them as a source of raw materials for the production of pectin. The optimum modes of preliminary washing of raw materials are offered, allowing to the remove the ballast substances as much as possible. It is established that when the drying temperature increases, the destructive processes are catalyzed: the strength of the pectin jelly and the uronide component and the degree of pectin esterification are reduced. The optimum drying temperature of damp apple pomaces is 80 0C, at which the quality of pectin extracted from the dried raw materials is maintained as much as possible. It is shown that the most effective for the pectin production is a fraction with a particle size of 3-5 mm, which allow us to extract up to 71 % of pectin from raw materials.

BÖHLER W403 VMR

Alloy Digest ◽  
2013 ◽  
Vol 62 (9) ◽  
Keyword(s):  
Heat Treatment ◽  
Chemical Composition ◽  
Physical Properties ◽  
Tool Steel ◽  
Raw Materials ◽  
Heat Treating ◽  
Diffusion Annealing ◽  
Selection Of

Abstract Böhler (or Boehler) W403 VMR is a tool steel with outstanding properties, based not only on a modified chemical composition, but on the selection of highly clean raw materials for melting, remelting under vacuum (VMF), optimized diffusion annealing, and a special heat treatment. This datasheet provides information on composition, physical properties, and elasticity. It also includes information on forming and heat treating. Filing Code: TS-721. Producer or source: Böhler Edelstahl GmbH.

Synthesis of Low Viscosity Polydimethylsiloxane Using Low Grade of Octamethylcyclotetrasiloxane

2021 ◽  
Vol 1028 ◽  
pp. 365-370
Author(s):  
Diba G Auliya ◽  
Soni Setiadji ◽  
Zulfi Mofa Agasa ◽  
Fitrilawati ◽  
Norman Syakir ◽  
...  
Keyword(s):  
Ring Opening ◽  
Raw Materials ◽  
Vitreoretinal Surgery ◽  
Production Costs ◽  
Low Grade ◽  
High Grade ◽  
High Quality ◽  
Low Viscosity ◽  
Polymerization Method

Polydimethylsiloxane (PDMS) has been widely used as a vitreous humour substitution in vitreoretinal surgery. Due to its limited availability and increasing domestic needs, the price of PDMS in Indonesia became very expensive. Previously, we reported the synthesized of PDMS from a high grade of monomer of 98% of Octamethylcyclotetrasiloxane (D4) and found that all PDMS samples produced high quality samples similar to that of commercial one. However, by considering the ease of obtaining raw materials and also the production costs, the synthesis of PDMS using monomer which easy to be found in Indonesia and low production costs is needed to be developed. Here, we reported the synthesis of PDMS using low grade of 96% of D4 in order to produce high quality of PDMS with low viscosity that can be used for vitreous humous substitution in vitreoretinal surgery. PDMS samples with low viscosity value of 0.94-1.35 Pa.s have been successfully synthesized from low grade of D4 and MM using ring-opening polymerization method. The yields of PDMS resulted in this research were in the range between 67.27% and 76.26%. From FTIR spectroscopy, it is found that all synthesized samples have structure and functional groups similar to PDMS using high grade of monomer of 98% Octamethylcyclotetrasiloxane (D4). From refractometer and surfgauge measurements, all samples have refractive index in the range of 1,4034-1,4040 and the value surface tension was 21 m.N/m.

IMPACT OF INNOVATIVE METHOD OF PREPARING TOBACCO LEAVES FOR DRYING ON THE BASIC PARAMETERS OF QUALITY OF TOBACCO RAW MATERIAL

2019 ◽  
Author(s):  
Е.Е. Ульянченко
Keyword(s):  
Chemical Composition ◽  
Quality Indicators ◽  
Raw Materials ◽  
Raw Material ◽  
Tobacco Leaves ◽  
Commercial Grade ◽  
Innovative Method ◽  
Main Indicator ◽  
Basic Parameters

Исследовано влияние приема прорезания средней жилки на основные качественные показатели табачного сырья. Исследования проводили на листьях основных сортотипов табака Трапезонд и Остролист по массовым ломкам. Прорезание жилки осуществляли на инновационном оборудовании экспериментальном образце линии подготовки листьев табака к сушке ЛПТС360 (ВНИИТТИ, Краснодар). Качество табачного сырья с прорезанной жилкой определяли по товарным сортам, технологическим и курительным свойствам, химическому составу по методикам лабораторного контроля ВНИИТТИ. Инновационный способ подготовки табака к сушке в едином потоке с применением технологического оборудования, включающего прорезатель, выявил положительный технологический результат. Установлена эффективность приема прорезания средней жилки: срок естественной сушки листьев с прорезанной жилкой сократился в 2,5 раза выход 1го товарного сорта сырья составил 74,60 87,93 выход волокна сырья с прорезанной жилкой превышает минимальное значение технологических норм (75) в 1,15 1,26 раз условный расход сырья на единицу курительных изделий меньше норматива на 6 25 улучшен основной показатель химического состава табачного сырья (число Шмука) в 1,6 4,6 раза у сортотипа Трапезонд, в 1,2 1,5 раза у сортотипа Остролист дегустационные свойства сырья не ухудшились. Инновационный способ подготовки листьев табака к сушке, включающий прием прорезания средней жилки, рекомендуется для применения в производстве табачного сырья. The influence of middle vein cutting method on the main quality indicators of tobacco raw materials is studied. Studies were carried out on the leaves of the main varieties of tobacco Trapezond and Ostrolist, on mass breakdowns. Vein cutting was carried out on the innovative equipment of the line of preparation of tobacco leaves for drying LPTS360 (GNU VNIITTI RAA, Krasnodar). The quality of tobacco raw materials with a cut vein was determined by commercial grades, technological and Smoking properties, chemical composition in accordance with the methods VNIITTI. An innovative method of preparing tobacco for drying in a single stream with the use of technological equipment, including a cutter, revealed a positive technological result. The period of natural drying of leaves with cut veins decreased by 2,5 times. The yield of the 1st commercial grade of raw materials was 74,60 87,93. The output of the fiber raw material with cut vein exceeds the minimum value of technological norms (75) in 1,15 1,26 times. Conditional consumption of raw materials per unit of Smoking products is less than the norm by 6 25. The method of cutting the middle vein of the leaves improves the main indicator in the chemical composition of tobacco raw materials (Schmuck ratio) 1,6 4,6 times in the variety Trapezond and 1,2 1,5 times in the variety Ostrolist. The tasting properties of raw materials have not deteriorated. Analysis of raw material quality indicators showed that the innovative method of cutting the middle vein is effective and recommended for use in the production of tobacco raw materials.

scholarly journals Reforestation of ‘Village Forest’ to Improve Sustaiability Creative Industries in Desa Siponjot

2021 ◽  
Vol 5 (2) ◽  
pp. 714-722
Author(s):  
Noverita Sprinse Vinolina ◽  
Antonio Marro Sipayung ◽  
Dardanila ◽  
Sondang Pintauli
Keyword(s):  
Forest Restoration ◽  
Raw Materials ◽  
Economic Value ◽  
Economic Benefits ◽  
Musical Instruments ◽  
Creative Industries ◽  
Raw Material ◽  
High Quality ◽  
The Village

This program is conducted to assist Siponjot Village while empowering the people of Siponjot Village to be able to utilize and maximize the benefit of the village forest. Village forest might support the availability of raw materials required for making musical instruments, such as high quality of wood, including how to process wood waste from making musical instruments to be used as creative souvenirs and improve the economic value. The raw material for production determined its results of the production of wood-based musical instruments. Thus, in order to produce a high quality tanginang, hasapi, and gondang, which previously began to be produced by arts crafts in the Sitangkubang area of ​​Siponjot Village, a high quality of raw materials is needed. The community service team surveyed the location of planting seeds for village forest restoration, provided socialization related to the importance of village forest cultivation and the suitability of the Siponjot Village area for the cultivation of these plants. Village forest restoration aims to maintain the beauty and beauty of the village. Implementation of village reforestation activities starting from socializing forest tourism and the strength of village forests to the community, followed by a discussion about village forest management and its economic benefits. Handover of a thousand units of forest plant seedlings given to the villagers of Siponjot as part of the forest restoration program in the area.

Durability and Permanence in the Quality – Contemporary Parameters, Defining the Papers and Cardboards for Printing Art

2019 ◽  
Vol 3 (2) ◽  
Author(s):  
Denitsa Ivanova-Alexandrova ◽  
◽  
◽  
Keyword(s):  
Chemical Composition ◽  
Quality Parameters ◽  
High Quality ◽  
Graphic Art ◽  
Long Period ◽  
External Influences ◽  
Two Factors ◽  
Composition Properties ◽  
The Impact

The long lifecycle, also known as durability and the permanence / invariability in the quality of papers and cardbords for graphic art, are today the basic requirements, imposed by printed art in terms of high quality parameters. These two factors are a manifestation, depending on different internal chemical-composition properties of the paper consistency and external influences of the ambience. Longevity and permanence are perceived as a function of aging and are actually observed at a later point in time. It is important to clarify that they are terms with different contents where „durability” is perceived as the ability of the paper or cardboard to resist the impact of wear during use, and the „permanence” is the possibility of product to remain chemically and physically stable for a long period of time.

Development and production of large blast furnaces from 2015 to 2016 in China

2020 ◽  
Vol 117 (1) ◽  
pp. 108 ◽  
Author(s):  
Bing Dai ◽  
Hong-ming Long ◽  
Yong-cai Wen ◽  
Yi-long Ji ◽  
Yun-cai Liu
Keyword(s):  
Raw Materials ◽  
Blast Furnaces ◽  
Security Risk ◽  
Hot Metal ◽  
High Quality ◽  
Large Blast ◽  
Existing Problems ◽  
Cost Cutting ◽  
The Future

This article has reviewed the production status, total reductant consumption, raw materials and operation principle indexes of large blast furnaces in China from 2015 to 2016. The developing actuality of Chinese large BFs has been quantitatively analyzed and the existing problems have been proposed clearly. Based on that, maintaining production stable, enhancing the quality of raw materials and improving the operation principles are suggested. Large BFs take advantages of high-quality hot metal, energy saving, cost-cutting, high mechanization and automation levels and are sufficient to meet the challenges of economic crisis, environmental pressure and security risk form the future. Thus, the number of large BFs in China will continue to increase in the future.

scholarly journals Characteristics and Influence to Fruit Distillates Quality of Rapid Induction of Ageing Character in the Presence of Mulberry Tree (Morus alba L.) Wooden Chips

2016 ◽  
Vol 73 (2) ◽  
pp. 165
Author(s):  
Elena MUDURA ◽  
Teodora COLDEA ◽  
Timea HORVATH ◽  
Carmen Rodica POP
Keyword(s):  
Heat Treatment ◽  
Chemical Composition ◽  
Volatile Compounds ◽  
Control Sample ◽  
Polyphenolic Compounds ◽  
Chemical Parameters ◽  
Rapid Induction ◽  
Factors Influencing ◽  
Mulberry Tree

Research on rapid induction of ageing character to double distilled traditional fruit brandies, from Transylvania region was conducted. Mulberry tree chips were used as an alternative to traditional ageing in wooden barrels. The aim of this study was to highlight the factors influencing the chemical composition of fruit brandies, both depending on the type of the wood used and the transformations occurred during the heat treatment. Fruit distillates were produced after the traditional method – double distillation in copper alambic. The evaluation of the brandies consisted in analyzing the chemical parameters and the phenolic compounds after two months of ageing with wood chips. Results were compared with a control sample (unaged distillate), and found that during the ageing process volatile and non-volatile compounds were extracted significantly. The heat treatment influenced the chemical composition of the wooden chips. The chemical composition of finished products varied due to the composition of the wooden chips used and to the heat treatment applied. Evaluation of volatile and non-volatile compounds formed was carried out by comparison with the samples of the unaged distillate. It was demonstrated the improvement of chemical characteristics and polyphenolic compounds content, by rapidly inducing of the ageing character.

scholarly journals Research into special technological effects for formation of wear resistant coatings using mineral raw materials of the far eastern region

2018 ◽  
Vol 56 ◽  
pp. 03027
Author(s):  
Viktor Makienko ◽  
Igor Romanov ◽  
Pavel Sokolov ◽  
Alexander Atenyaev ◽  
Dmitry Pervakov
Keyword(s):  
Mechanical Properties ◽  
Raw Materials ◽  
Experimental Studies ◽  
Eastern Region ◽  
Mineral Raw Materials ◽  
Wear Resistant Coatings ◽  
Thermal Fields ◽  
Additional Influence ◽  
Far Eastern

The results of the study of the possibility of using additional technological influence in the formation of doped coatings are presented. The distribution of thermal fields has been calculated, which makes it possible to estimate and predict the influence of additional influence on the formation of the coating in a simplified manner. Experimental studies have shown that additional technological influence promotes mixing of the melt, leading to an increase in the transition of alloying elements, as well as an increase in the mechanical properties and quality of the weld metal.

Sign in / Sign up

Export Citation Format

Share Document