scholarly journals Recommendation System for Major University Determination Based on Student’s Profile and Interest

2017 ◽  
Vol 2 (1) ◽  
pp. 21-28 ◽  
Author(s):  
Desi Purwanti Kusumaningrum ◽  
Noor Ageng Setiyanto ◽  
Erwin Yudi Hidayat ◽  
Khafiizh Hastuti
Keyword(s):  
Recommendation System ◽  
Dropping Out ◽  
Prospective Students ◽  
National Education ◽  
Academic System ◽  
New Students ◽  
Education Statistics ◽  
Academic Information ◽  
The Relationship ◽  
Selection Of

Failure study on university students is one of the serious problems we face today. Data from the Centre for Education Statistics Research and Development of the Ministry of National Education Republic of Indonesia showed that the percentage of students graduate on time from 2001 to 2011 only reached 51.97%. In addition, cases of students dropping out at the beginning of the semester is also quite significant. One of the causes of failure of this study was the selection of major’s errors when applying to university. This study offers a selection subject recommendation system that builds on the profile data and student’s interest using the technique of Association Rule. Results of the rules of the relationship will then be matched with prospective students using questionnaires dynamic, so expect new students get recommendations more valid subject fit the profile and interest respectively. The system built on this research utilizes student data stored on the academic system of Dian Nuswantoro University. This model however can be adapted by all the universities that has a system of academic information. At the end of this system is expected to be used to minimize failures caused students study majors election mistakes

scholarly journals Sistem Seleksi Penerimaan Siswa Baru Menggunakan Metode Weighted Product

2017 ◽  
Vol 2 (2) ◽  
pp. 25-32
Author(s):  
Bella Mayhendra ◽  
Petrus Sokibi
Keyword(s):  
Junior High School ◽  
Report Cards ◽  
Fast Time ◽  
Final Examination ◽  
Selection System ◽  
Prospective Students ◽  
Advantages And Disadvantages ◽  
New Students ◽  
Range Of Values ◽  
Selection Of

The Acceptance of new students in SMA Negeri 1 Rajagaluh is done by choosing alternate prospective students who qualify based on predetermined variables. The problem faced by the team of selectors is how to determine the best students from a number of prospective students who have advantages and disadvantages of each with a very fast time so often mistakes in the selection of new students in SMA Negeri 1 Rajagaluh and less objective in providing an assessment for selected. In this thesis built a new decision support selection system using the method of Weighted Product (WP). The variables used in the selection of admissions in SMA Negeri 1 Rajagaluh are the national final examination scores, the final examination score of the school, the value of junior high school report cards. This system is designed using PHP programming language (Hypertext Processor File) as well as MySQL database as a database server. This system generates rankings of prospective new students in accordance with the procedure of admission of students in SMA Negeri 1 Rajagaluh, where the result is in the form of student ranking. This system has several advantages that variable and a weight value of variables used in this system is dynamic. This system also has a shortage of the range of values on the variable is still static

scholarly journals SISTEM REKOMENDASI PENERIMAAN MAHASISWA BARU MENGGUNAKAN NAIVE BAYES CLASSIFIER DI INSTITUT PENDIDIKAN INDONESIA

JOUTICA ◽  
2018 ◽  
Vol 3 (2) ◽  
pp. 171
Author(s):  
Andri Suryadi ◽  
Erwin Harahap
Keyword(s):  
Recommendation System ◽  
Naive Bayes ◽  
Selection Process ◽  
Naïve Bayes ◽  
Naive Bayes Classifier ◽  
Bayes Classifier ◽  
Prospective Students ◽  
Naïve Bayes Classifier ◽  
New Student ◽  
Selection Of

The quality of a university in creating qualified graduates is determined by the prospective students who enter the college. One of the things that can determine the quality is how the selection process of candidates for good student acceptance. However, the selection process of admissions in every college of course is different. Often the input of prospective students who enter the university is not in accordance with the expected so that the impact of graduate results. Therefore it is necessary for a system that can support the decision in the selection of new student candidates in order to get a good student input. This research builds a Recommendation System that will assist in the selection process of universities for the selection team of new student candidates. This recommendation system uses the naïve Bayes classifier method where the test scores of incoming selection of students who have been accepted will be used as training data and then classified based on the value of ipk that has been obtained. The value of the ipk will be a benchmark for the formation of classes - classes that are recommendations to the selection team. The classes that are formed are classes whose ipk value is at the accepted point and the class whose ipk value is not accepted. Then given a new student data, if the prospective student enters the safe class then it will be recommended to be accepted but otherwise it will be recommended to be rejected

Sistem Pendukung Keputusan SNMPTN Jalur Undangan Dengan Metode Electre

2018 ◽  
Vol 3 ◽  
pp. 14
Author(s):  
Lidia K Simanjuntak ◽  
Tessa Y M Sihite ◽  
Mesran Mesran ◽  
Nuning Kurniasih ◽  
Yuhandri Yuhandri
Keyword(s):  
Decision Making ◽  
Decision Support ◽  
Decision Support System ◽  
Support System ◽  
Action Selection ◽  
Multi Criteria Decision Making ◽  
Prospective Students ◽  
College Entrance ◽  
Electre Method ◽  
Selection Of

All colleges each year organize the selection of new admissions. Acceptance of prospective students in universities as education providers is done by selecting prospective students based on achievement in school and college entrance selection. To select the best student candidates based on predetermined criteria, then use Multi-Criteria Decision Making (MCDM) or commonly called decision support system. One method in MCDM is the Elimination Et Choix Traduisant la Reality (ELECTRE). The ELECTRE method is the best method of action selection. The ELECTRE method to obtain the best alternative by eliminating alternative that do not fit the criteria and can be applied to the decision SNMPTN invitation path.

IMPROVEMENT OF SPRING DURUM WHEAT SELECTION METHODOLOGIES UNDER CLIMATE CHANGE CONDITIONS

1970 ◽  
pp. 33-36
Author(s):  
А. I. Grabovets ◽  
V. P. Kadushkina ◽  
S. А. Kovalenko
Keyword(s):  
Grain Yield ◽  
Durum Wheat ◽  
Correlation Coefficient ◽  
Harvest Index ◽  
Unit Area ◽  
Correlation Coefficients ◽  
Chemical Mutagenesis ◽  
Main Method ◽  
The Relationship ◽  
Selection Of

With the growing aridity of the climate on the Don, it became necessary to improve the methodology for conducting the  breeding of spring durum wheat. The main method of obtaining the source material remains intraspecific step hybridization. Crossings were performed between genetically distant forms, differing in origin and required traits and properties. The use of chemical mutagenesis was a productive way to change the heredity of genotypes in terms of drought tolerance. When breeding for productivity, both in dry years of research and in favorable years, the most objective markers were identified — the size of the aerial mass, the mass of grain per plant, spike, and harvest index. The magnitude of the correlation coefficients between the yield per unit area and the elements of its structure is established. It was most closely associated with them in dry years, while in wet years it decreased. Power the correlation of the characteristics of the pair - the grain yield per square meter - the aboveground biomass averaged r = 0.73, and in dry years it was higher (0.91) than in favorable ones (0.61 - 0.70) , between the harvest and the harvest index - r = 0.81 (on average). In dry years, the correlation coefficient increased to 0.92. Research data confirms the greatest importance of the mass of grain from one ear and the plant in the formation of grain yield per unit area in both dry and wet years. In dry years, the correlation coefficient between yield and grain mass per plant was on average r = 0.80; in favorable years, r = 0.69. The relationship between yield and grain mass from the ear was greater — r = 0.84 and r = 0.82, respectively. Consequently, the breeding significance of the aboveground mass and the productivity of the ear, as a criterion for the selection of the crop, especially increases in the dry years. They were basic in the selection.

Pengembangan Aplikasi Pendukung Keputusan Pemilihan Program Studi dengan Metode Fuzzy Logic (Studi Kasus: Universitas Multimedia Nusantara)

2016 ◽  
Vol 7 (1) ◽  
pp. 12-18
Author(s):  
Joko Haryanto ◽  
Seng Hansun
Keyword(s):  
Decision Making ◽  
Fuzzy Logic ◽  
Decision Support ◽  
Decision Support System ◽  
Support System ◽  
System Application ◽  
Prospective Students ◽  
Fuzzy Logic Method ◽  
Index Terms ◽  
Selection Of

This paper describes the development of decision support system application to assist students who want to enter college so that no one choose the majors incorrectly. This application uses fuzzy logic method because fuzzy logic is very flexible in data which are vague and can be represented as a linguistic variable. The purpose of this application is to assist students to choose available majors at University Multimedia Nusantara which are appropriate with his/her capabilities. This application accepts five kinds of input values i.e. Mathematics, Indonesian, English, Physics, and TIK. Received input will be processed by the calculation of the system for decision-making and the application will generate output that shows how great a match for each majors. With this application, prospective students can find out where the majors that match his/her capabilities. This application has ninety nine percentage of match result accuracy. Index Terms—fuzzy logic, decision support system, UMN, selection of major

Analisa Pemilihan Moda Transportasi Umum Rute Tanjung Karang – Bandara Radin Inten II Dengan Stated Preference dan Uji Crame’s V

2018 ◽  
Vol 2 (2) ◽  
pp. 137
Author(s):  
Muhammad Abi Berkah Nadi
Keyword(s):  
Regression Analysis ◽  
Utility Function ◽  
Stated Preference ◽  
Technical Analysis ◽  
Chi Square ◽  
Time Headway ◽  
Independent Variable ◽  
The Relationship ◽  
Selection Of

Radin Inten II Airport is a national flight in Lampung Province. In this study using the technical analysis stated preference which is the approach by conveying the choice statement in the form of hypotheses to be assessed by the respondent. By using these techniques the researcher can fully control the hypothesized factors. To determine utility function for model forecasting in fulfilling request of traveler is used regression analysis with SPSS program. The analysis results obtained that the passengers of the dominant airport in the selection of modes of cost attributes than on other attributes. From the result of regression analysis, the influence of independent variable to the highest dependent variable is when the five attributes are used together with the R square value of 8.8%. The relationship between cost, time, headway, time acces and service with the selection of modes, the provision that states whether or not there is a decision. The significance of α = 0.05 with chi-square. And the result of Crame's V test average of 0.298 is around the middle, then the relationship is moderate enough.

A Biomarker Combining Imaging and Neuropsychological Assessment for Tracking Early Alzheimer's Disease in Clinical Trials

2018 ◽  
Vol 15 (5) ◽  
pp. 429-442 ◽  
Author(s):  
Nishant Verma ◽  
S. Natasha Beretvas ◽  
Belen Pascual ◽  
Joseph C. Masdeu ◽  
Mia K. Markey ◽  
...  
Keyword(s):  
Alzheimer’S Disease ◽  
Alzheimer's Disease ◽  
Clinical Trials ◽  
Cognitive Impairment ◽  
Latent Variable ◽  
Brain Regions ◽  
Disease Assessment ◽  
Latent Variable Analysis ◽  
The Relationship ◽  
Selection Of

Background: Combining optimized cognitive (Alzheimer's Disease Assessment Scale- Cognitive subscale, ADAS-Cog) and atrophy markers of Alzheimer's disease for tracking progression in clinical trials may provide greater sensitivity than currently used methods, which have yielded negative results in multiple recent trials. Furthermore, it is critical to clarify the relationship among the subcomponents yielded by cognitive and imaging testing, to address the symptomatic and anatomical variability of Alzheimer's disease. Method: Using latent variable analysis, we thoroughly investigated the relationship between cognitive impairment, as assessed on the ADAS-Cog, and cerebral atrophy. A biomarker was developed for Alzheimer's clinical trials that combines cognitive and atrophy markers. Results: Atrophy within specific brain regions was found to be closely related with impairment in cognitive domains of memory, language, and praxis. The proposed biomarker showed significantly better sensitivity in tracking progression of cognitive impairment than the ADAS-Cog in simulated trials and a real world problem. The biomarker also improved the selection of MCI patients (78.8±4.9% specificity at 80% sensitivity) that will evolve to Alzheimer's disease for clinical trials. Conclusion: The proposed biomarker provides a boost to the efficacy of clinical trials focused in the mild cognitive impairment (MCI) stage by significantly improving the sensitivity to detect treatment effects and improving the selection of MCI patients that will evolve to Alzheimer’s disease.

Excessive Belching: a Separate Syndrome or Another Symptom of Functional Dyspepsia?

2020 ◽  
Vol 30 (3) ◽  
pp. 55-60 ◽  
Author(s):  
A. A. Sheptulin ◽  
O. A. Storonova
Keyword(s):  
Functional Dyspepsia ◽  
Functional Gastrointestinal Disorders ◽  
High Resolution Manometry ◽  
Published Evidence ◽  
Key Points ◽  
Dyspeptic Symptoms ◽  
The Relationship ◽  
Rome Iv ◽  
Selection Of ◽  
Optimal Treatment Strategy

Aim of review. Interpretation of published evidence on the relationship between the excessive belching syndrome and functional dyspepsia (FD) and their management in patient care.Key points. According to the Rome IV criteria of functional gastrointestinal disorders (FGID), excessive belching in the absence of other dyspeptic symptoms is to be considered a manifestation of the excessive belching syndrome, which can be of gastric or supragastric nature. Combination of high-resolution manometry and impedancemetry allows an accurate diagnosis of belching and selection of optimal treatment strategy. Belching complicated by other symptoms of dyspepsia is to be considered yet another FD symptom according to the Rome IV criteria of FGID. Prokinetics are recommended to relieve belching in such cases.Conclusion. Understanding the relationship between the excessive belching syndrome and FD requires further research.

scholarly journals The Impact of Alkaloid-Producing Epichloë Endophyte on Forage Ryegrass Breeding: A New Zealand Perspective

Toxins ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 158
Author(s):  
Colin Eady
Keyword(s):  
Seed Production ◽  
Health Issues ◽  
Abiotic Stressors ◽  
Livestock Health ◽  
The Right ◽  
The Impact ◽  
The Relationship ◽  
And Storage ◽  
Selection Of ◽  
Epichloë Endophyte

For 30 years, forage ryegrass breeding has known that the germplasm may contain a maternally inherited symbiotic Epichloë endophyte. These endophytes produce a suite of secondary alkaloid compounds, dependent upon strain. Many produce ergot and other alkaloids, which are associated with both insect deterrence and livestock health issues. The levels of alkaloids and other endophyte characteristics are influenced by strain, host germplasm, and environmental conditions. Some strains in the right host germplasm can confer an advantage over biotic and abiotic stressors, thus acting as a maternally inherited desirable ‘trait’. Through seed production, these mutualistic endophytes do not transmit into 100% of the crop seed and are less vigorous than the grass seed itself. This causes stability and longevity issues for seed production and storage should the ‘trait’ be desired in the germplasm. This makes understanding the precise nature of the relationship vitally important to the plant breeder. These Epichloë endophytes cannot be ‘bred’ in the conventional sense, as they are asexual. Instead, the breeder may modulate endophyte characteristics through selection of host germplasm, a sort of breeding by proxy. This article explores, from a forage seed company perspective, the issues that endophyte characteristics and breeding them by proxy have on ryegrass breeding, and outlines the methods used to assess the ‘trait’, and the application of these through the breeding, production, and deployment processes. Finally, this article investigates opportunities for enhancing the utilisation of alkaloid-producing endophytes within pastures, with a focus on balancing alkaloid levels to further enhance pest deterrence and improving livestock outcomes.

Selection of Materials and Sensors for Health Monitoring of Composite Structures

2003 ◽  
Vol 785 ◽  
Author(s):  
Seth S. Kessler ◽  
S. Mark Spearing
Keyword(s):  
Health Monitoring ◽  
Lamb Wave ◽  
Composite Structures ◽  
Structural Damage ◽  
Performance Metrics ◽  
Full Range ◽  
Transportation Systems ◽  
Health Monitoring Systems ◽  
The Relationship ◽  
Selection Of

ABSTRACTEmbedded structural health monitoring systems are envisioned to be an important component of future transportation systems. One of the key challenges in designing an SHM system is the choice of sensors, and a sensor layout, which can detect unambiguously relevant structural damage. This paper focuses on the relationship between sensors, the materials of which they are made, and their ability to detect structural damage. Sensor selection maps have been produced which plot the capabilities of the full range of available sensor types vs. the key performance metrics (power consumption, resolution, range, sensor size, coverage). This exercise resulted in the identification of piezoceramic Lamb wave transducers as the sensor of choice. Experimental results are presented for the detailed selection of piezoceramic materials to be used as Lamb wave transducers.

Sign in / Sign up

Export Citation Format

Share Document