scholarly journals Thermoelectricity Modeling with Cold Dipole Atoms in Aubry Phase of Optical Lattice

2020 ◽  
Vol 10 (6) ◽  
pp. 2090
Author(s):  
Oleg Zhirov ◽  
José Lages ◽  
Dima Shepelyansky
Keyword(s):  
Thermoelectric Properties ◽  
Optical Lattice ◽  
Figure Of Merit ◽  
Cold Atoms ◽  
Periodic Potential ◽  
Cold Atom ◽  
Critical Amplitude ◽  
Dipole Interactions ◽  
Symplectic Map ◽  
A Chain

We study analytically and numerically the thermoelectric properties of a chain of cold atoms with dipole-dipole interactions placed in an optical periodic potential. At small potential amplitudes the chain slides freely that corresponds to the Kolmogorov-Arnold-Moser phase of integrable curves of a symplectic map. Above a certain critical amplitude the chain is pinned by the lattice being in the cantori Aubry phase. We show that the Aubry phase is characterized by exceptional thermoelectric properties with the figure of merit Z T = 25 being 10 times larger than the maximal value reached in material science experiments. We show that this system is well accessible for magneto-dipole cold atom experiments that opens new prospects for investigations of thermoelectricity.

scholarly journals Detecting a many-body mobility edge with quantum quenches

2016 ◽  
Vol 1 (1) ◽  
Author(s):  
Piero Naldesi ◽  
Elisa Ercolessi ◽  
Tommaso Roscilde
Keyword(s):  
Periodic Potential ◽  
Cold Atom ◽  
Many Body ◽  
Mobility Edge ◽  
Scaling Properties ◽  
Quasi Stationary State ◽  
Quantum Quenches ◽  
A Chain ◽  
The Many ◽  
Practical Scheme

The many-body localization (MBL) transition is a quantum phase transition involving highly excited eigenstates of a disordered quantum many-body Hamiltonian, which evolve from “extended/ergodic" (exhibiting extensive entanglement entropies and fluctuations) to “localized" (exhibiting area-law scaling of entanglement and fluctuations). The MBL transition can be driven by the strength of disorder in a given spectral range, or by the energy density at fixed disorder – if the system possesses a many-body mobility edge. Here we propose to explore the latter mechanism by using “quantum-quench spectroscopy", namely via quantum quenches of variable width which prepare the state of the system in a superposition of eigenstates of the Hamiltonian within a controllable spectral region. Studying numerically a chain of interacting spinless fermions in a quasi-periodic potential, we argue that this system has a many-body mobility edge; and we show that its existence translates into a clear dynamical transition in the time evolution immediately following a quench in the strength of the quasi-periodic potential, as well as a transition in the scaling properties of the quasi-stationary state at long times. Our results suggest a practical scheme for the experimental observation of many-body mobility edges using cold-atom setups.

scholarly journals Out-of-Equilibrium Dynamics of the Bose-Hubbard Model

2013 ◽  
Vol 2013 ◽  
pp. 1-39 ◽  
Author(s):  
Malcolm P. Kennett
Keyword(s):  
Hubbard Model ◽  
Optical Lattice ◽  
Cold Atoms ◽  
Cold Atom ◽  
Future Directions ◽  
Experimental Realization ◽  
Equilibrium Dynamics ◽  
Open Questions ◽  
Quantum Quenches ◽  
Insulating Phase

The Bose-Hubbard model is the simplest model of interacting bosons on a lattice. It has recently been the focus of much attention due to the realization of this model with cold atoms in an optical lattice. The ability to tune parameters in the Hamiltonian as a function of time in cold atom systems has opened up the possibility of studying out-of-equilibrium dynamics, including crossing the quantum critical region of the model in a controlled way. In this paper, I give a brief introduction to the Bose Hubbard model, and its experimental realization and then give an account of theoretical and experimental efforts to understand out-of-equilibrium dynamics in this model, focusing on quantum quenches, both instantaneous and of finite duration. I discuss slow dynamics that have been observed theoretically and experimentally for some quenches from the superfluid phase to the Mott insulating phase and the picture of two timescales, one for fast local equilibration and another for slow global equilibration, that appears to characterize this situation. I also discuss the theoretical and experimental observation of the Lieb-Robinson bounds for a variety of quenches and the Kibble-Zurek mechanism in quenches from the Mott insulator to superfluid. I conclude with a discussion of open questions and future directions.

Probing Bloch oscillations using a slow-light sensor

2020 ◽  
Vol 9 (5) ◽  
pp. 243-246
Author(s):  
Pei-Chen Kuan ◽  
Chang Huang ◽  
Shau-Yu Lan
Keyword(s):  
Phase Shift ◽  
Optical Lattice ◽  
Cold Atoms ◽  
Slow Light ◽  
Internal State ◽  
Electromagnetically Induced Transparency ◽  
Bloch Oscillations ◽  
Bloch Oscillation ◽  
Induced Transparency ◽  
Transparency Condition

AbstractWe implement slow-light under electromagnetically induced transparency condition to measure the motion of cold atoms in an optical lattice undergoing Bloch oscillation. The motion of atoms is mapped out through the phase shift of light without perturbing the external and internal state of the atoms. Our results can be used to construct a continuous motional sensor of cold atoms.

Influence of multi-sintering on the thermoelectric properties of Bi2Sr2Co2Oy ceramics

2019 ◽  
Vol 34 (02) ◽  
pp. 2050019 ◽  
Author(s):  
Y. Zhang ◽  
M. M. Fan ◽  
C. C. Ruan ◽  
Y. W. Zhang ◽  
X.-J. Li ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Phonon Scattering ◽  
Sintered Sample ◽  
Thermoelectric Figure Of Merit ◽  
Thermoelectric Figure ◽  
The Third ◽  
Ceramic Samples ◽  
Optimum Formula

[Formula: see text] ceramic samples have a structure similar to phonon glass electronic crystals, and their thermoelectric properties can be effectively adjusted through repeated grinding and sintering. The results show that multi-sintering can make their grain refined and increase their grain boundary, which will effectively increase density and phonon scattering. Finally, multi-sintering can reduce the resistivity and thermal conductivity, thus obviously improve thermoelectric figure of merit [Formula: see text] of [Formula: see text]. The optimum [Formula: see text] value of 0.26 is achieved at 923 K by the third sintered sample.

scholarly journals Mechanosynthesis and Thermoelectric Properties of Fe, Zn, and Cd-Doped P-Type Tetrahedrite: Cu12-xMxSb4S13

Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3448
Author(s):  
Francisco Arturo López Cota ◽  
José Alonso Díaz-Guillén ◽  
Oscar Juan Dura ◽  
Marco Antonio López de la Torre ◽  
Joelis Rodríguez-Hernández ◽  
...  
Keyword(s):  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Powder Processing ◽  
High Energy ◽  
Secondary Phases ◽  
Ambient Conditions ◽  
Cadmium Sulfate ◽  
Electrical Conductivities ◽  
Compositional Changes ◽  
P Type

This contribution deals with the mechanochemical synthesis, characterization, and thermoelectric properties of tetrahedrite-based materials, Cu12-xMxSb4S13 (M = Fe2+, Zn2+, Cd2+; x = 0, 1.5, 2). High-energy mechanical milling allows obtaining pristine and substituted tetrahedrites, after short milling under ambient conditions, of stoichiometric mixtures of the corresponding commercially available binary sulfides, i.e., Cu2S, CuS, Sb2S3, and MS (M = Fe2+, Zn2+, Cd2+). All the target materials but those containing Cd were obtained as single-phase products; some admixture of a hydrated cadmium sulfate was also identified by XRD as a by-product when synthesizing Cu10Cd2Sb4S13. The as-obtained products were thermally stable when firing in argon up to a temperature of 350–400 °C. Overall, the substitution of Cu(II) by Fe(II), Zn(II), or Cd(II) reduces tetrahedrites’ thermal and electrical conductivities but increases the Seebeck coefficient. Unfortunately, the values of the thermoelectric figure of merit obtained in this study are in general lower than those found in the literature for similar samples obtained by other powder processing methods; slight compositional changes, undetected secondary phases, and/or deficient sintering might account for some of these discrepancies.

Effects of Ce filling fraction and Fe content on the thermoelectric properties of Co-rich CeyFexCo4−xSb12

2001 ◽  
Vol 16 (3) ◽  
pp. 837-843 ◽  
Author(s):  
Xinfeng Tang ◽  
Lidong Chen ◽  
Takashi Goto ◽  
Toshio Hirai
Keyword(s):  
Thermal Conductivity ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Single Phase ◽  
Lattice Thermal Conductivity ◽  
Hole Concentration ◽  
Thermoelectric Figure Of Merit ◽  
Thermoelectric Figure ◽  
Filling Fraction ◽  
Fe Content

Single-phase filled skutterudite compounds, CeyFexCo4−xSb12 (x = 0 to 3.0, y = 0 to 0.74), were synthesized by a melting method. The effects of Fe content and Ce filling fraction on the thermoelectric properties of CeyFexCo4−xSb12 were investigated. The lattice thermal conductivity of Ce-saturated CeyFexCo4−xSb12, y being at the maximum corresponding to x, decreased with increasing Fe content (x) and reached its minimum at about x = 1.5. When x was 1.5, lattice thermal conductivity decreased with increasing Ce filling fraction till y = 0.3 and then began to increase after reaching the minimum at y = 0.3. Hole concentration and electrical conductivity of Cey Fe1.5Co2.5Sb12 decreased with increasing Ce filling fraction. The Seebeck coefficient increased with increasing Ce filling fraction. The greatest dimensionless thermoelectric figure of merit T value of 1.1 was obtained at 750 K for the composition of Ce0.28Fe1.52Co2.48Sb12.

Effects of Nb doping on thermoelectric properties of Zn4Sb3 at high temperatures

2009 ◽  
Vol 24 (2) ◽  
pp. 430-435 ◽  
Author(s):  
D. Li ◽  
H.H. Hng ◽  
J. Ma ◽  
X.Y. Qin
Keyword(s):  
Thermal Conductivity ◽  
Electrical Resistivity ◽  
High Temperatures ◽  
Thermoelectric Properties ◽  
Figure Of Merit ◽  
Thermoelectric Performance ◽  
Temperature Range ◽  
A Value ◽  
Nb Doping ◽  
Thermal Conductivities

The thermoelectric properties of Nb-doped Zn4Sb3 compounds, (Zn1–xNbx)4Sb3 (x = 0, 0.005, and 0.01), were investigated at temperatures ranging from 300 to 685 K. The results showed that by substituting Zn with Nb, the thermal conductivities of all the Nb-doped compounds were lower than that of the pristine β-Zn4Sb3. Among the compounds studied, the lightly substituted (Zn0.995Nb0.005)4Sb3 compound exhibited the best thermoelectric performance due to the improvement in both its electrical resistivity and thermal conductivity. Its figure of merit, ZT, was greater than the undoped Zn4Sb3 compound for the temperature range investigated. In particular, the ZT of (Zn0.995Nb0.005)4Sb3 reached a value of 1.1 at 680 K, which was 69% greater than that of the undoped Zn4Sb3 obtained in this study.

The Influence of Silicon Dopant and Processing on Thermoelectric Properties of B4C Ceramics

1998 ◽  
Vol 545 ◽  
Author(s):  
Ke-Feng Cai ◽  
Ce-Wen Nan ◽  
Xin-Min Min
Keyword(s):  
Electrical Conductivity ◽  
Seebeck Coefficient ◽  
Thermoelectric Properties ◽  
Hot Pressing ◽  
Figure Of Merit ◽  
Room Temperature ◽  
A Value ◽  
Si Doped

AbstractB4C ceramics doped with various content of Si (0 to 2.03 at%) are prepared via hot pressing. The composition and microstructure of the ceramics are characterized by means of XRD and EPMA. Their electrical conductivity and Seebeck coefficient of the samples are measured from room temperature up to 1500K. The electrical conductivity increases with temperature, and more rapidly after 1300K; the Seebeck coefficient of the ceramics also increases with temperature and rises to a value of about 320μVK−1. The value of the figure of merit of Si-doped B4C rises to about 4 × 10−4K−1 at 1500K.

Fabrication of Bi-Te Based Thermoelectric Semiconductors by Using Hybrid Powders

2005 ◽  
Vol 297-300 ◽  
pp. 875-880
Author(s):  
Cheol Ho Lim ◽  
Ki Tae Kim ◽  
Yong Hwan Kim ◽  
Dong Choul Cho ◽  
Young Sup Lee ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Single Crystals ◽  
Thermoelectric Properties ◽  
Thermoelectric Materials ◽  
Figure Of Merit ◽  
Bending Strength ◽  
Mixing Ratio ◽  
Plasma Sintering ◽  
Spark Plasma ◽  
P Type

P-type Bi0.5Sb1.5Te3 compounds doped with 3wt% Te were fabricated by spark plasma sintering and their mechanical and thermoelectric properties were investigated. The sintered compounds with the bending strength of more than 50MPa and the figure-of-merit 2.9×10-3/K were obtained by controlling the mixing ratio of large powders (PL) and small powders (PS). Compared with the conventionally prepared single crystal thermoelectric materials, the bending strength was increased up to more than three times and the figure-of-merit Z was similar those of single crystals. It is expected that the mechanical properties could be improved by using hybrid powders without degradation of thermoelectric properties.

Sign in / Sign up

Export Citation Format

Share Document