scholarly journals Wastewater Treatment Using Alkali-Activated-Based Sorbents Produced from Blast Furnace Slag

2021 ◽  
Vol 11 (7) ◽  
pp. 2985
Author(s):  
Saverio Latorrata ◽  
Riccardo Balzarotti ◽  
Maria Isabella Adami ◽  
Bianca Marino ◽  
Silvia Mostoni ◽  
...  
Keyword(s):  
Low Cost ◽  
Steel Production ◽  
Metallurgical Industry ◽  
High Alumina ◽  
Ambient Conditions ◽  
Good Opportunity ◽  
Metal Capture ◽  
Mine Effluent ◽  
Alkaline Component ◽  
Alkali Activated

Currently, slags from secondary steel production, foundries, and blast furnaces represent a major environmental problem since they end up mainly in landfills, and their valorization would bring undeniable advantages both to environment and economy. Moreover, the removal of heavy metal ions from mines wastewater is one of the challenges of the last decades, and adsorption has been proposed as one of the most promising techniques for this purpose. In this context, the use of alkali-activated slags as sorbent can be a good opportunity to develop low cost, environmentally friendly, and sustainable materials. Accordingly, wastewater decontamination by adsorption over a porous monolithic bed made of alkali-activated hydraulic binders is proposed. Alkali-activated materials were prepared using slags from the metallurgical industry and reacted with an alkaline component (high alumina calcium aluminate cement, CAC 80) at ambient conditions. The obtained monolithic foams were tested to evaluate the uptake efficiency towards metal capture. Solutions containing Cu(II), Fe(III), Ni(II), Mn(II), and simulating the metal concentrations of a real mine effluent were tested, both in single- and multi-ion solutions. Promising capture efficiency, values of 80–100% and of 98–100% in the case of the single ion and of the multi-ion solutions were obtained, respectively.

scholarly journals Green Transforming Metallurgical Residue into Alkali-Activated Silicomanganese Slag-Based Cementitious Material as Photocatalyst

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1773 ◽  
Author(s):  
Yao Zhang ◽  
Pan He ◽  
Hao Chen ◽  
Li Liu
Keyword(s):  
Photocatalytic Degradation ◽  
Separation Efficiency ◽  
Low Cost ◽  
Critical Role ◽  
Metallurgical Industry ◽  
Cementitious Material ◽  
Cementitious Composite ◽  
Silicomanganese Slag ◽  
Electron Transfers ◽  
Alkali Activated

Silicomanganese slag is a solid waste in metallurgical industry and can be transformed into an alkali-activated silicomanganese slag-based cementitious-material (ASSC) for the first time. The ASSC shows quite low electro-conductivity and can be raised dramatically by incorporated carbon black (CB) in the matrix of ASSC to create an electro-conductive alkali-activated silicomanganese slag-based cementitious-composite (EASSC), served as a low cost and environmentally-friendly photocatalyst for the removal of dye pollutant in the paper. The interrelationships of mechanical, optical, electroconductive, microstructural, and photocatalytic properties are evaluated. The network of CB plays a critical role in the electron transfers. The electrical conductivity of EASSC doped 4.5% CB drastically increases by 594.2 times compared to that of ASSC. The FESEM, XRD, and XPS results indicated that the EASSC with mean grain size about 50 nm is composed of amorphous calcium silicate hydrate (CSH), alabandite (α-MnS) and CB. The UV–vis DRS and PL exhibit that the absorption edges of electro-conductive alkali-activated silicomanganese slag-based cementitious-composite EASSC samples are gradually blue-shifted and the photoluminescence intensities progressively decrease with increasing CB content. The activities of photocatalytic degradation of basic violet 5BN dye are positive correlated to the electro-conductivities. The separation efficiency of photo-generated electron-hole pairs is enhanced due to the electron transfers from α-MnS to the network of CB. The photocatalytic degradation of dye pollutant belongs to the second order kinetics via a reaction mechanism of superoxide radical (•O2−) intermediate.

scholarly journals Preparation and Characterization of High-Efficiency Magnetic Heavy Metal Capture Flocculants

Water ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 1732
Author(s):  
Yuanyuan Yu ◽  
Yongjun Sun ◽  
Jun Zhou ◽  
Aowen Chen ◽  
Kinjal J. Shah
Keyword(s):  
Heavy Metal ◽  
Reaction Time ◽  
High Efficiency ◽  
Removal Rate ◽  
Low Cost ◽  
Monomer Concentration ◽  
Synthesis Process ◽  
Response Surface Optimization ◽  
Metal Capture ◽  
Total Monomer Concentration

In this study, a high-efficiency magnetic heavy metal flocculant MF@AA was prepared based on carboxymethyl chitosan and magnetic Fe3O4. It was characterized by SEM, FTIR, XPS, XRD and VSM, and the Cu(II) removal rate was used as the evaluation basis for the preparation process. The effects of AMPS content, total monomer concentration, photoinitiator concentration and reaction time on the performance of MF@AA flocculation to remove Cu(II) were studied. The characterization results show that MF@AA has been successfully prepared and exhibits good magnetic induction characteristics. The synthesis results show that under the conditions of 10% AMPS content, 35% total monomer concentration, 0.04% photoinitiator concentration, and 1.5 h reaction time, the best yield of MF@AA is 77.69%. The best removal rate is 87.65%. In addition, the response surface optimization of the synthesis process of MF@AA was performed. The optimal synthesis ratio was finally determined as iron content 6.5%, CMFS: 29.5%, AM: 53.9%, AMPS: 10.1%. High-efficiency magnetic heavy metal flocculant MF@AA shows excellent flocculation performance in removing Cu(II). This research provides guidance and ideas for the development of efficient and low-cost flocculation technology to remove Cu(II) in wastewater.

scholarly journals Lifetime Analysis of Rubber Gasket Composed of Methyl Vinyl Silicone Rubber with Low-Temperature Resistance

2015 ◽  
Vol 2015 ◽  
pp. 1-9
Author(s):  
Young-Doo Kwon ◽  
Seong-Hwa Jun ◽  
Ji-Min Song
Keyword(s):  
Silicone Rubber ◽  
Mechanical Load ◽  
Low Cost ◽  
Accelerated Life Test ◽  
Parameter Method ◽  
Ambient Conditions ◽  
Methyl Vinyl ◽  
Accelerated Life ◽  
Elastomeric Materials ◽  
Lifetime Analysis

Most machines and instruments constantly require elastomeric materials like rubber for the purposes of shock absorption, noise attenuation, and sealing. The material properties and accurate lifetime prediction of rubber are closely related to the quality of machines, especially their durability and reliability. The properties of rubber-like elastomers are influenced by ambient conditions, such as temperature, environment, and mechanical load. Moreover, the initial properties of rubber gaskets must be sustained under working conditions to satisfy their required function. Because of its technical merits, as well as its low cost, the highly accelerated life test (HALT) is used by many researchers to predict the long-term lifetime of rubber materials. Methyl vinyl silicone rubber (VMQ) has recently been adopted to improve the lifetime of automobile radiator gaskets. A four-parameter method of determining the recovery ability of the gaskets was recently published, and two revised methods of obtaining the recovery were proposed for polyacrylate (ACM) rubber. The recovery rate curves for VMQ were acquired using the successive zooming genetic algorithm (SZGA). The gasket lifetime for the target recovery (60%) of a compressed gasket was computed somewhat differently depending on the selected regression model.

scholarly journals Magnetic biochar from alkali-activated rice straw for removal of rhodamine B from aqueous solution

2019 ◽  
Vol 25 (4) ◽  
pp. 536-544 ◽  
Author(s):  
Zhaogang Ren ◽  
Fang Chen ◽  
Bin Wang ◽  
Zhongxian Song ◽  
Ziyu Zhou ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Rice Straw ◽  
Rhodamine B ◽  
Electrostatic Interactions ◽  
Organic Dyes ◽  
Low Cost ◽  
Magnetic Biochar ◽  
Other Substances ◽  
Initial Ph ◽  
Alkali Activated

To address organic dye wastewater, economic and effective adsorbents are required. Here, magnetic biochar from alkali-activated rice straw (AMBC) was successfully synthesized using one-step magnetization and carbonization method. The alkaline activation caused the large specific surface area, high pore volume and abundant oxygen-containing groups of the AMBC, and the magnetization gave the AMBC a certain degree of electropositivity and fast equilibrium characteristics. These characteristics collectively contributed to a relative high adsorption capacity of 53.66 mg g<sup>−1</sup> for this adsorbent towards rhodamine B (RhB). In brief, RhB can spontaneously adsorb onto the heterogeneous surface of the AMBC and reach the equilibrium in 60 min. Although the initial pH, ionic strength and other substances of the solution affected the adsorption performance of the AMBC, it could be easily regenerated and reused with considerable adsorption content. Based on the results, H-bonds, π–π stacking and electrostatic interactions were speculated as the primary mechanisms for RhB adsorption onto the AMBC, which was also demonstrated by the FTIR analysis. With the advantageous features of low cost, easy separation, considerable adsorption capacity and favorable stability and reusability, the AMBC would be a potential adsorbent for removing organic dyes from wastewater.

scholarly journals The efficiency of plasticizing surfactants in alkali-activated cement mortars and concretes

2018 ◽  
Vol 230 ◽  
pp. 03016 ◽  
Author(s):  
Raisa Runova ◽  
Volodymyr Gots ◽  
Igor Rudenko ◽  
Oleksandr Konstantynovskyi ◽  
Oles’ Lastivka
Keyword(s):  
Compressive Strength ◽  
Blast Furnace Slag ◽  
Chemical Nature ◽  
Granulated Blast Furnace Slag ◽  
Cement Mortars ◽  
Alkaline Component ◽  
Property Modification ◽  
Furnace Slag ◽  
Alkali Activated ◽  
Strength In Bending

Functionality of mortar and concrete mixes is regulated by surfactants, which act as plasticizers. The molecular structure of these admixtures can be changed during hydration of alkali-activated cements (AAC). The objective was to determine the chemical nature of plasticizers effective for property modification of mortars and concretes based on AACs with changing content of granulated blast furnace slag from 0 to 100 %. The admixtures without ester links become more effective than polyesters when content of alkaline component increase. The admixtures effective in high alkaline medium were used in dry mixes for anchoring (consistency of mortar 150 mm by Vicat cone; 1 d tensile strength in bending / compressive strength of mortar 6.6 /30.6 MPa) and in ready-mixed concretes (consistency class changed from S1 to S3, S4 with consistency safety during 60 min; 3 d compressive strength of modified concrete was not less than the reference one without admixtures).

scholarly journals Comparing the Use of High- to Low-Cost Black Carbon and Carbon Dioxide Sensors for Characterizing On-Road Diesel Truck Emissions

Sensors ◽  
2020 ◽  
Vol 20 (23) ◽  
pp. 6714
Author(s):  
Rebecca A. Sugrue ◽  
Chelsea V. Preble ◽  
Thomas W. Kirchstetter
Keyword(s):  
Carbon Dioxide ◽  
Black Carbon ◽  
Emission Factor ◽  
Lower Cost ◽  
Low Cost ◽  
Ambient Air ◽  
Source Characterization ◽  
Ambient Conditions ◽  
Heavy Duty Diesel ◽  
Carbon Dioxide Co2

The exhaust plume capture method is a commonly used approach to measure pollutants emitted by in-use heavy-duty diesel trucks. Lower cost sensors, if used in place of traditional research-grade analyzers, could enable wider application of this method, including use as a monitoring tool to identify high-emitting trucks that may warrant inspection and maintenance. However, low-cost sensors have for the most part only been evaluated under ambient conditions as opposed to source-influenced environments with rapidly changing pollutant concentrations. This study compared black carbon (BC) emission factors determined using different BC and carbon dioxide (CO2) sensors that range in cost from $200 to $20,000. Controlled laboratory experiments show that traditional zero and span steady-state calibration checks are not robust indicators of sensor performance when sampling short duration concentration peaks. Fleet BC emission factor distributions measured at two locations at the Port of Oakland in California with 16 BC/CO2 sensor pairs were similar, but unique sensor pairs identified different high-emitting trucks. At one location, the low-cost PP Systems SBA-5 agreed on the classification of 90% of the high emitters identified by the LI-COR LI-7000 when both were paired with the Magee Scientific AE33. Conversely, lower cost BC sensors when paired with the LI-7000 misclassified more than 50% of high emitters when compared to the AE33/LI-7000. Confidence in emission factor quantification and high-emitter identification improves with larger integrated peak areas of CO2 and especially BC. This work highlights that sensor evaluation should be conducted under application-specific conditions, whether that be for ambient air monitoring or source characterization.

Facile, cost-effective plasma synthesis of self-supportive FeSx on Fe foam for efficient electrochemical reduction of N2 under ambient conditions

2019 ◽  
Vol 7 (34) ◽  
pp. 19977-19983 ◽  
Author(s):  
Wei Xiong ◽  
Zheng Guo ◽  
Shijun Zhao ◽  
Qian Wang ◽  
Qiyong Xu ◽  
...  
Keyword(s):  
Plasma Treatment ◽  
Electrochemical Reduction ◽  
Production Rate ◽  
Low Cost ◽  
Cost Effective ◽  
Plasma Synthesis ◽  
Ambient Conditions ◽  
Faradaic Efficiency

A non-precious, self-supportive FeSx NRR electrocatalyst was synthesized by a simple H2S-plasma treatment on low-cost Fe foam, which shows a remarkable NH3 production rate of 4.13 × 10−10 mol s−1 cm−2 and a high faradaic efficiency of 17.6%.

Using Response Surface Methodology in Synthesis of Ultrafine Copper Nanoparticles by Electrolysis

2016 ◽  
Vol 15 (01n02) ◽  
pp. 1650001 ◽  
Author(s):  
A. Tamilvanan ◽  
K. Balamurugan ◽  
K. Ponappa ◽  
B. Madhan Kumar
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Process Parameters ◽  
Low Cost ◽  
Cu Nanoparticles ◽  
Ambient Conditions ◽  
X Ray Diffraction ◽  
Electrode Gap ◽  
Average Size ◽  
Ultrafine Copper

Electrolysis is a method used for producing copper (Cu) nanoparticles at faster rate and at low cost in ambient conditions. The property of Cu nanoparticles prepared by electrolysis depends on their process parameters. The influence of selected process parameters such as copper sulfate (CuSo4) concentration, electrode gap and electrode potential difference on particle size was investigated. To optimize these parameters response surface methodology (RSM) was used. Cu nanoparticles prepared by electrolysis were characterized by using X-ray diffraction (XRD) and scanning electron microscope (SEM). After reviewing the results of analysis of variance (ANOVA), mathematical equation was created and optimized parameters for producing Cu nanoparticles were determined. The results confirm that the average size of Cu particle at the optimum condition was found to be 17[Formula: see text]nm and they are hexagonal in shape.

scholarly journals Long-term evaluation of air sensor technology under ambient conditions in Denver, Colorado

2018 ◽  
Vol 11 (8) ◽  
pp. 4605-4615 ◽  
Author(s):  
Stephen Feinberg ◽  
Ron Williams ◽  
Gayle S. W. Hagler ◽  
Joshua Rickard ◽  
Ryan Brown ◽  
...  
Keyword(s):  
Air Pollution ◽  
Wind Direction ◽  
Low Cost ◽  
Geographic Location ◽  
Field Evaluation ◽  
Time Of Day ◽  
Sensor Technology ◽  
Ambient Conditions ◽  
Data Completeness ◽  
Sampling Campaign

Abstract. Air pollution sensors are quickly proliferating for use in a wide variety of applications, with a low price point that supports use in high-density networks, citizen science, and individual consumer use. This emerging technology motivates the assessment under real-world conditions, including varying pollution levels and environmental conditions. A seven-month, systematic field evaluation of low-cost air pollution sensors was performed in Denver, Colorado, over 2015–2016; the location was chosen to evaluate the sensors in a high-altitude, cool, and dry climate. A suite of particulate matter (PM), ozone (O3), and nitrogen dioxide (NO2) sensors were deployed in triplicate and were collocated with federal equivalent method (FEM) monitors at an urban regulatory site. Sensors were evaluated for their data completeness, correlation with reference monitors, and ability to reproduce trends in pollution data, such as daily concentration values and wind-direction patterns. Most sensors showed high data completeness when data loggers were functioning properly. The sensors displayed a range of correlations with reference instruments, from poor to very high (e.g., hourly-average PM Pearson correlations with reference measurements varied from 0.01 to 0.86). Some sensors showed a change in response to laboratory audits/testing from before the sampling campaign to afterwards, such as Aeroqual, where the O3 response slope changed from about 1.2 to 0.6. Some PM sensors measured wind-direction and time-of-day trends similar to those measured by reference monitors, while others did not. This study showed different results for sensor performance than previous studies performed by the U.S. EPA and others, which could be due to different geographic location, meteorology, and aerosol properties. These results imply that continued field testing is necessary to understand emerging air sensing technology.

scholarly journals Selective Oxofunctionalization of Cyclohexene over Titanium Dioxide-Based and Bismuth Oxyhalide Photocatalysts by Visible Light Irradiation

Catalysts ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1448
Author(s):  
Adolfo Henríquez ◽  
Héctor D. Mansilla ◽  
Azael Martínez-de la Cruz ◽  
Lorena Cornejo-Ponce ◽  
Eduardo Schott ◽  
...  
Keyword(s):  
Titanium Dioxide ◽  
Visible Light ◽  
Molecular Oxygen ◽  
Low Cost ◽  
Ambient Conditions ◽  
Metal Halide Lamp ◽  
Relevant Role ◽  
Bismuth Oxyhalide ◽  
Potential Use ◽  
Oxygenated Products

Photocatalysis driven under visible light allows us to carry out hydrocarbon oxofunctionalization under ambient conditions, using molecular oxygen as a sacrificial reagent, with the absence of hazardous subproducts and the potential use of the Sun as a clean and low-cost source of light. In this work, eight materials—five based on titanium dioxide and three based on bismuth oxyhalides—were used as photocatalysts in the selective oxofunctionalization of cyclohexene. The cyclohexane oxofunctionalization reactions were performed inside of a homemade photoreactor equipped with a 400 W metal halide lamp and injected air as a source of molecular oxygen. In all assayed systems, the main oxygenated products, identified by mass spectrometry, were 1,2-epoxycyclohexane, 2-cyclohexen-1-ol, and 2-cyclohexen-1-one. Titanium dioxide-based materials exhibited higher selectivities for 1,2-epoxycyclohexane than bismuth oxyhalide-based materials. In addition to this, titanium dioxide doped with iron exhibited the best selectivity for 1,2-epoxycyclohexane, demonstrating that iron plays a relevant role in the cyclohexene epoxidation process.

Sign in / Sign up

Export Citation Format

Share Document