scholarly journals Analysis and Mapping of Detailed Inner Information of Crystalline Grain by Wavelength-Resolved Neutron Transmission Imaging with Individual Bragg-Dip Profile-Fitting Analysis

2021 ◽  
Vol 11 (11) ◽  
pp. 5219
Author(s):  
Yosuke Sakurai ◽  
Hirotaka Sato ◽  
Nozomu Adachi ◽  
Satoshi Morooka ◽  
Yoshikazu Todaka ◽  
...  
Keyword(s):  
Crystal Orientation ◽  
Perfect Crystal ◽  
Imaging Method ◽  
Transmission Imaging ◽  
Profile Fitting ◽  
Imaging Results ◽  
Integrated Intensity ◽  
Small Change ◽  
Integrated Intensities ◽  
Pulsed Neutron

As a new method for evaluating single crystals and oligocrystals, pulsed neutron Bragg-dip transmission analysis/imaging method is being developed. In this study, a single Bragg-dip profile-fitting analysis method was newly developed, and applied for analyzing detailed inner information in a crystalline grain position-dependently. In the method, the spectrum profile of a single Bragg-dip is analyzed at each position over a grain. As a result, it is expected that changes in crystal orientation, mosaic spread angle and thickness of a perfect crystal can be evaluated from the wavelength, the width and the integrated intensity of the Bragg-dip, respectively. For confirming this effectiveness, the method was applied to experimental data of position-dependent Bragg-dip transmission spectra of a Si-steel plate consisting of oligocrystals. As a result, inner information of multiple crystalline grains could be visualized and evaluated. The small change in crystal orientation in a grain, about 0.4°, could be observed by imaging the Bragg-dip wavelengths. By imaging the Bragg-dip widths, both another grain and mosaic block in a grain were detected. Furthermore, imaging results of the integrated intensities of Bragg-dips were consistent with the results of Bragg-dip width imaging. These small crystallographic changes have not been observed and visualized by previous Bragg-dip analysis methods.

scholarly journals Bragg-edge attenuation spectra at voxel level from 4D wavelength-resolved neutron tomography

2020 ◽  
Vol 53 (1) ◽  
pp. 188-196 ◽  
Author(s):  
Chiara Carminati ◽  
Markus Strobl ◽  
Triestino Minniti ◽  
Pierre Boillat ◽  
Jan Hovind ◽  
...  
Keyword(s):  
Reference Sample ◽  
Polycrystalline Materials ◽  
Imaging Method ◽  
Neutron Tomography ◽  
Nickel Iron ◽  
Transmission Imaging ◽  
Reconstructed Volume ◽  
Quantitative Results ◽  
Tomography Reconstruction ◽  
Pulsed Neutron

4D wavelength-resolved neutron tomography of a reference sample made of several polycrystalline materials, namely nickel, iron, titanium, lead, copper and aluminium, is presented. Data were acquired using the time-of-flight transmission imaging method at the IMAT beamline at the ISIS pulsed neutron source. Wavelength-dispersive tomography reconstruction was computed using filtered back projection, allowing wavelength-resolved total-cross-section retrieval for each voxel in the reconstructed volume of the sample. The need for background correction to enable quantitative results and analysis is discussed, and the achieved 3D spatial resolution with respect to the obtained Bragg-edge pattern quality is investigated.

Preoperative identification of the facial nerve in patients with large cerebellopontine angle tumors using high-density diffusion tensor imaging

2012 ◽  
Vol 116 (4) ◽  
pp. 697-702 ◽  
Author(s):  
Neil Roundy ◽  
Johnny B. Delashaw ◽  
Justin S. Cetas
Keyword(s):  
Diffusion Tensor Imaging ◽  
Facial Nerve ◽  
Cerebellopontine Angle ◽  
Diffusion Tensor ◽  
Tumor Resection ◽  
High Density ◽  
Imaging Method ◽  
Study Objective ◽  
Nerve Preservation ◽  
Imaging Results

Object Facial nerve paresis can be a devastating complication following resection of large (> 2.5 cm) cerebellopontine angle (CPA) tumors. The authors have developed and used a new high-density diffusion tensor imaging (HD-DT imaging) method, aimed at preoperatively identifying the location and course of the facial nerve in relation to large CPA tumors. Their study objective was to preoperatively identify the facial nerve in patients with large CPA tumors and compare their HD-DT imaging method with a traditional standard DT imaging method and correlate with intraoperative findings. Methods The authors prospectively studied 5 patients with large (> 2.5 cm) CPA tumors. All patients underwent preoperative traditional standard- and HD-DT imaging. Imaging results were correlated with intraoperative findings. Results Utilizing their HD-DT imaging method, the authors positively identified the location and course of the facial nerve in all patients. In contrast, using a standard DT imaging method, the authors were unable to identify the facial nerve in 4 of the 5 patients. Conclusions The HD-DT imaging method that the authors describe and use has proven to be a powerful, accurate, and rapid method for preoperatively identifying the facial nerve in relation to large CPA tumors. Routine integration of HD-DT imaging in preoperative planning for CPA tumor resection could lead to improved facial nerve preservation.

scholarly journals Phaseless Imaging by Reverse Time Migration: Acoustic Waves

2017 ◽  
Vol 10 (1) ◽  
pp. 1-21 ◽  
Author(s):  
Zhiming Chen ◽  
Guanghui Huang
Keyword(s):  
Acoustic Waves ◽  
Numerical Experiments ◽  
Cross Correlation ◽  
Scattering Data ◽  
Imaging Method ◽  
Total Field ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Time Migration ◽  
Imaging Results

AbstractWe propose a reliable direct imaging method based on the reverse time migration for finding extended obstacles with phaseless total field data. We prove that the imaging resolution of the method is essentially the same as the imaging results using the scattering data with full phase information when the measurement is far away from the obstacle. The imaginary part of the cross-correlation imaging functional always peaks on the boundary of the obstacle. Numerical experiments are included to illustrate the powerful imaging quality

scholarly journals A 3-D SAR Imaging Method Based on Back Projection Algorithm

2021 ◽  
Vol 2083 (3) ◽  
pp. 032050
Author(s):  
Qian Han ◽  
Pengbo Wang ◽  
Xinkai Zhou ◽  
Xinchang Hu ◽  
Yanan Guo
Keyword(s):  
3D Imaging ◽  
Bp Algorithm ◽  
Projection Algorithm ◽  
Imaging Method ◽  
Back Projection ◽  
Imaging Processing ◽  
Imaging Algorithm ◽  
Imaging Results ◽  
2D Imaging ◽  
Low Efficiency

Abstract 3D back projection (BP) algorithm is an imaging algorithm based on time domain echo data, which effectively solves the overlapping mask problem existing in 2D SAR. It can complete the imaging processing of echo signal under any geometry configuration, and has the advantages of high target focusing accuracy and high phase preservation. However, the high complexity and low efficiency of 3D BP imaging algorithm limit its application and development. In this paper, a 3d imaging method based on improved back projection algorithm is proposed. Aiming at the problem that existing imaging algorithms need 2D imaging first and then 3D imaging, an improved 3D BP algorithm is proposed to directly 3D imaging, which avoids 2d imaging processing. The proposed method simplifies the steps of the traditional 3D BP algorithm and improves the efficiency of the algorithm. The validity and effectiveness of the proposed method are verified by the 3d imaging results of simulated lattice targets.

Laser Monitors for High Speed Imaging of Plasma, Beam and Discharge Processes

2016 ◽  
Vol 712 ◽  
pp. 303-307 ◽  
Author(s):  
Maxim V. Trigub ◽  
Stanislav N. Torgaev ◽  
Gennadiy S. Evtushenko ◽  
Vitaliy V. Drobchik
Keyword(s):  
High Speed ◽  
Metal Vapor ◽  
Optical Systems ◽  
Imaging Method ◽  
High Speed Imaging ◽  
Destructive Testing ◽  
Copper Bromide ◽  
Imaging Results ◽  
High Pulse ◽  
Non Destructive

The imaging results of different processes blocked from the observation by the intense background light are presented in this paper. Active optical systems based on high-frequency brightness amplifier are used to decrease the negative factor of the glare. The experimental and modeling results on obtaining high pulse repetition frequencies (PRF) (more than 100 kHz) of copper bromide vapor brightness amplifiers operating in a low input energy mode are shown. The use of metal vapor brightness amplifiers for visual non-destructive testing of fast processes obscured by the glare is also discussed. It has been shown that the imaging method proposed in this paper proves to be the most reliable to obtain the information about objects or processes in a real time mode using high PRF CuBr active media.

scholarly journals CIST: An Improved ISAR Imaging Method Using Convolution Neural Network

2020 ◽  
Vol 12 (16) ◽  
pp. 2641
Author(s):  
Shunjun Wei ◽  
Jiadian Liang ◽  
Mou Wang ◽  
Xiangfeng Zeng ◽  
Jun Shi ◽  
...  
Keyword(s):  
Neural Network ◽  
Computational Cost ◽  
Convolution Neural Network ◽  
Imaging Method ◽  
Sampled Data ◽  
High Quality ◽  
Imaging Methods ◽  
Adaptive Parameter ◽  
Imaging Results ◽  
Isar Imaging

Compressive sensing (CS) has been widely utilized in inverse synthetic aperture radar (ISAR) imaging, since ISAR measured data are generally non-completed in cross-range direction, and CS-based imaging methods can obtain high-quality imaging results using under-sampled data. However, the traditional CS-based methods need to pre-define parameters and sparse transforms, which are tough to be hand-crafted. Besides, these methods usually require heavy computational cost with large matrices operation. In this paper, inspired by the adaptive parameter learning and rapidly reconstruction of convolution neural network (CNN), a novel imaging method, called convolution iterative shrinkage-thresholding (CIST) network, is proposed for ISAR efficient sparse imaging. CIST is capable of learning optimal parameters and sparse transforms throughout the CNN training process, instead of being manually defined. Specifically, CIST replaces the linear sparse transform with non-linear convolution operations. This new transform and essential parameters are learnable end-to-end across the iterations, which increases the flexibility and robustness of CIST. When compared with the traditional state-of-the-art CS imaging methods, both simulation and experimental results demonstrate that the proposed CIST-based ISAR imaging method can obtain imaging results of high quality, while maintaining high computational efficiency. CIST-based ISAR imaging is tens of times faster than other methods.

Numerical and experimental investigation of damage severity estimation using Lamb wave–based imaging methods

2018 ◽  
Vol 30 (4) ◽  
pp. 618-635 ◽  
Author(s):  
Asaad Migot ◽  
Yeasin Bhuiyan ◽  
Victor Giurgiutiu
Keyword(s):  
Lamb Wave ◽  
Lamb Waves ◽  
Wave Interaction ◽  
Crack Size ◽  
Imaging Method ◽  
Size Estimation ◽  
Local Approach ◽  
Imaging Methods ◽  
Imaging Results ◽  
Scattering Wave

In this article, estimation of crack size, shape, and orientation was investigated numerically and experimentally using Lamb waves. A hybrid global–local approach was used in conjunction with the imaging methods for the numerical simulation. The hybrid global–local approach allowed fast and efficient prediction of scattering wave signals for Lamb wave interaction with crack from various incident directions. The simulation results showed the directionality effect of the scattering wave signals and suggested an optimum transmitter–sensor configuration. Two imaging methods were used: one involves the synthetic time reversal concept and the other involves Gaussian distribution function. Both imaging methods show very good agreement during simulations. Experiments were designed and conducted based on the simulated results. A network of eight piezoelectric wafer active sensors was used to capture the scattering waves from the crack. Both the pitch-catch and pulse-echo experimental modes were used. The directionality effect of incident Lamb waves on the imaging results was studied. The effect of summation, multiplication, and combined algorithms for each imaging method was studied. It was found that both methods can successfully predict the crack size and orientation. An attempt was made to use these imaging methods for detecting and sizing smaller sized damage (1- to 3-mm-diameter hole). It was found that these methods can successfully localize the hole, but size estimation was a bit challenging because of the smaller dimensions. The scattering waves for various hole sizes were studied.

Diffraction imaging for fault-karst structure by least-squares reverse time migration

2020 ◽  
pp. 1-40
Author(s):  
Xinru Mu ◽  
Jianping Huang ◽  
Liyun Fu ◽  
Shikai Jian ◽  
Bing Hu ◽  
...  
Keyword(s):  
Least Squares ◽  
Western China ◽  
Small Scale ◽  
Imaging Method ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Time Migration ◽  
Imaging Results ◽  
Heterogeneous Structures ◽  
Karst Reservoir

The fault-karst reservoir, which evolved from the deformation and karstification of carbonate rock, is one of the most important reservoir types in western China. Along the deep-seated fault zones, there are a lot widely spread and densely distributed fractures and vugs. The energy of the diffractions generated by heterogeneous structures, such as faults, fractures and vugs, are much weaker than that of the reflections produced by continuous formation interface. When using conventional full wavefield imaging method, the imaging results of continuous layers usually cover small-scale heterogeneities. Given that, we use plane-wave destruction (PWD) filter to separate the diffractions from the full data and image the separated diffractions using least-squares reverse time migration (LSRTM) method. We use several numerical examples to demonstrate that the newly developed diffractions LSRTM (D-LSRTM) can improve the definition of the heterogeneous structures, characterize the configuration and internal structure of the fault-karst structure well and enhance the interpretation accuracy for fault-karst reservoir.

Defect Imaging via Chirp Signal Excitation in Plate

2013 ◽  
Vol 846-847 ◽  
pp. 826-830
Author(s):  
Hong Lei Chen ◽  
Fei Deng ◽  
Xi Zhang
Keyword(s):  
Detection System ◽  
Tone Burst ◽  
Wave Mode ◽  
Guided Wave ◽  
Imaging Method ◽  
Chirp Signal ◽  
Imaging Results ◽  
Exciting Frequency ◽  
Hole Defect ◽  
Defect Imaging

The chirp signal can bring some useful information for structural non-destructive evaluation (NDE) applications due to its broad frequency components with different sensitivity to defects that exist in test pieces. This paper introduces a defect imaging method based on the chirp signal. When a chirp signal is used as excitation in the guided wave detection system, tone burst results can be gotten from the response easily. Numerical simulation results show that this method simplifies the procedure to find the best exciting frequency and guided wave mode for the hole defect detection, and yields more accurate defect imaging results with arc imaging algorithm.

Effect of Hydrogen Radical on Properties of Hydrogen in Hydrogenated Microcrystalline Silicon

2000 ◽  
Vol 609 ◽  
Author(s):  
Takashi Itoh ◽  
Noriyuki Yamana ◽  
Hiroki Inouchi ◽  
Norimitsu Yoshida ◽  
Hidekuni Harada ◽  
...  
Keyword(s):  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
Volume Fraction ◽  
Chemical Vapor ◽  
Hot Wire ◽  
Crystalline Volume Fraction ◽  
Microcrystalline Silicon ◽  
Integrated Intensity ◽  
Hydrogen Radical ◽  
Integrated Intensities

ABSTRACTHydrogenated microcrystalline silicon (μc-Si:H) films are prepared by hot-wire assisted plasma enhanced chemical vapor deposition, which controls the hydrogen radical density by filament temperatures, Tf, without changing other conditions. The effect of hydrogen radical on the properties of incorporated hydrogen into μc-Si:H films is studied using infrared absorption and gas effusion spectroscopies. The hydrogen concentration decreases with increasing Tf. The crystalline volume fraction, Xc, increases with Tf and shows a peak at Tf of 1850 °C. Integrated intensities of the modes near 2000 and 2100 cm-1 decrease with increasing Tf. Integrated intensity of the mode near 880 cm-1 shows almost same tendency of Xc. The effect of hydrogen radical on the properties of incorporated hydrogen into μc-Si:H films is discussed.

Sign in / Sign up

Export Citation Format

Share Document