scholarly journals Waste Electrical and Electronic Fund Policy: Current Status and Evaluation of Implementation in China

2021 ◽  
Vol 18 (24) ◽  
pp. 12945
Author(s):  
Xiao-Shan Yang ◽  
Xiao-Xue Zheng ◽  
Tian-Yu Zhang ◽  
Ying Du ◽  
Fengru Long
Keyword(s):  
Life Cycle ◽  
Circular Economy ◽  
Cost Management ◽  
Assessment Method ◽  
Ecological Environment ◽  
Current Status ◽  
Initial Stage ◽  
Funding Policies ◽  
The World ◽  
Extended Analysis

With the accelerated iteration of global electronic and electrical product updates, the demand for electronic and electrical products presents a new trend in which the life cycle of electronic and electrical products is shortened. Waste electrical and electronic equipment (WEEE) products pose a great threat to the global ecological environment, and solving this problem is urgent. Therefore, governments around the world have formulated funding policies for WEEE products, which has led to continuous improvements in such policies. Along these lines, we adopt the circular economy concept, extended producer responsibility theory and life cycle assessment method to comparatively analyse and compare the different fund operation modes in China, Germany, Japan and The Netherlands. In addition, based on the data related to fund policy implementation, we point out the problems in the development of the WEEE industry in China. The analysis results show that although China is the largest WEEE market, it is still in the initial stage and lags behind Western countries in efficiency and cost management. Then, taking as an example ‘Go Green’, an O2O classified recycling platform launched in 2005, this paper performs an extended analysis of the “Internet +” recycling model, which was proposed as a WEEE fund operation solution in China. Finally, we discuss the economic impact of this study on the future implementation and valuation of WEEE fund policy.

Introduction to an Approach to Performing Sustainability Quantification of Concrete Structures

2018 ◽  
Vol 272 ◽  
pp. 273-279 ◽  
Author(s):  
Břetislav Teplý ◽  
Tomáš Vymazal ◽  
Pavla Rovnaníková
Keyword(s):  
Life Cycle ◽  
Circular Economy ◽  
Mineral Resources ◽  
Waste Recycling ◽  
Point Of View ◽  
Raw Material ◽  
Load Bearing Capacity ◽  
Sustainability Management ◽  
The World ◽  
Whole Life Cycle

Efficient sustainability management requires the use of tools that enable the quantification, measurement or comparison of material, technological and construction variants. Tools of this kind which have been developed around the world in recent years include various indicators, indexes, etc. Generally, technical, economic, ecological and socio-cultural areas must all be included. Such a tool can be used as a powerful marketing aid and as support for the transition to the “circular economy”. Life Cycle Assessment (LCA) procedures are also used, alongside other approaches. LCA is a method that evaluates the life cycle of a structure from the point of view of its effect on the environment. Processes starting with the mining of mineral resources and including their transport, production and use up to their final processing as waste (recycling) are all taken into account. In addition, consideration is given to energy and raw material costs, and to environmental impact throughout the whole life cycle – e.g. through emissions. The presented contribution focuses on the quantification of sustainability connected with the use of various types of concrete with regard to their resistance against the effect of degrading influences. Sustainability factors are also determined using information regarding service life and “eco-costs”. The aim is to present a suitable methodology which can simplify decision-making concerning the design and choice of concrete mixes from a wider perspective, i.e. not only from the aspects of load-bearing capacity or durability.

scholarly journals Circular Economy: A milestone for Zero Waste Municipality

2021 ◽  
Vol 58 (1) ◽  
pp. 1418-1424
Author(s):  
Chainarong Khaw-ngern
Keyword(s):  
Life Cycle ◽  
Waste Management ◽  
Solid Waste ◽  
Circular Economy ◽  
Product Life Cycle ◽  
New Products ◽  
Repair Service ◽  
Zero Waste ◽  
The World

People around the world generate billion tons of waste. Over two billion tons of solid waste was produced in 2016 and it is estimated to rise to 3.4 billion tons by 2050. The world’s trash amount is reaching crisis and seems to getting bigger and bigger unless we take a systematic action to deal with it. The purpose of this article is to study a methodology for zero waste municipalities, examine the role of a community in addressing municipal waste and moving towards zero waste, and to evaluate how circular economy can contribute in achieving zero waste municipality. Zero waste is likely adopted as a mechanism for waste management, but circular economy is a mechanism for industries and businesses in both eliminating waste and promoting resource efficiency as products are intentionally designed and manufactured to be repurposed and recycled. The result showed that with the circular economy concept, the waste can be reduced at the first stage of prevention as products are designed to use regenerative materials and designing technic to make them last longer and repairable in the light of designing out waste. Also, waste can be getting less and less due to the practices of reuse and repair service which extends product life cycle. Recycling is another practice that contributes to waste elimination as the component parts and materials will be used for manufacturing new products.

scholarly journals A life cycle assessment of reprocessing face masks during the Covid-19 pandemic

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Bart van Straten ◽  
S. Ligtelijn ◽  
L. Droog ◽  
E. Putman ◽  
J. Dankelman ◽  
...  
Keyword(s):  
Climate Change ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Carbon Footprint ◽  
Circular Economy ◽  
Climate Change Impact ◽  
Assessment Method ◽  
Medical Products ◽  
Change Impact ◽  
Circular Design

AbstractThe Covid-19 pandemic led to threatening shortages in healthcare of medical products such as face masks. Due to this major impact on our healthcare society an initiative was conducted between March and July 2020 for reprocessing of face masks from 19 different hospitals. This exceptional opportunity was used to study the costs impact and the carbon footprint of reprocessed face masks relative to new disposable face masks. The aim of this study is to conduct a Life Cycle Assessment (LCA) to assess and compare the climate change impact of disposed versus reprocessed face masks. In total 18.166 high quality medical FFP2 face masks were reprocessed through steam sterilization between March and July 2020. Greenhouse gas emissions during production, transport, sterilization and end-of-life processes were assessed. The background life cycle inventory data were retrieved from the ecoinvent database. The life cycle impact assessment method ReCiPe was used to translate emissions into climate change impact. The cost analysis is based on actual sterilization as well as associated costs compared to the prices of new disposable face masks. A Monte Carlo sampling was used to propagate the uncertainty of different inputs to the LCA results. The carbon footprint appears to be 58% lower for face masks which were reused for five times compared to new face masks which were used for one time only. The sensitivity analysis indicated that the loading capacity of the autoclave and rejection rate of face masks has a large influence on the carbon footprint. The estimated cost price of a reprocessed mask was €1.40 against €1.55. The Life Cycle Assessment demonstrates that reprocessed FFP2 face masks from a circular economy perspective have a lower climate change impact on the carbon footprint than new face masks. For policymakers it is important to realize that the carbon footprint of medical products such as face masks may be reduced by means of circular economy strategies. This study demonstrated a lower climate change impact and lower costs when reprocessing and reusing disposable face masks for five times. Therefore, this study may serve as an inspiration for investigating reprocessing of other medical products that may become scarce. Finally, this study advocates that circular design engineering principles should be taken into account when designing medical devices. This will lead to more sustainable products that have a lower carbon footprint and may be manufactured at lower costs.

scholarly journals Using Life Cycle Assessment Method for Selecting Optimal Waste Management System in Tehran City

2019 ◽  
Author(s):  
Fahimeh Rahimi ◽  
Farideh Atabi ◽  
Jafar Nouri ◽  
GhasemAli Omrani
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Waste Management ◽  
Assessment Method ◽  
Phase Iii ◽  
Current Status ◽  
Second Phase ◽  
The Third ◽  
Third Phase

Introduction: In Tehran with a population of 9 million currently, about 2.5 million tons municipal solid waste have been producing annually. Materials and Models: In this study by using Life Cycle Assessment (LCA) model an optimal system of waste management of Tehran was recommended. Based on the quantity and quality of waste in Tehran in 2013 and facilities, three scenarios were selected. First, current status (15% compost, 5% recycling and 80% landfill), second, the maximum use of the capabilities of waste of Tehran (70% compost, 20% recycled and 10% landfill ) and third, the optimal scenario according to conditions of Tehran (55% compost, 10% recycling, 5% energy recovery and 30% landfill). The IWM model and WRATE model was used for Phase II and Phase III, respectively. Results: Results of the conducting second Phase showed in compared to the first scenario by the second and third scenario, the amount of emissions was decreased 64% and 72%, respectively. The third phase results showed the third scenario has the lowest environmental impact in chosen six impact groups. Conclusion: Considering the quality and quantity of wastes in Tehran and also the current facilities, conducting the third scenario could be useful for reducing emissions, the external costs and environmental impacts.

PERSPECTIVE DEVELOPMENT OF WORLD PRODUCTION OF FEEDS FOR AQUACULTURE: ALTERNATIVE SOURCES OF RAW MATERIALS

2017 ◽  
pp. 67-78
Author(s):  
Lina Yurievna Lagutkina
Keyword(s):  
Raw Materials ◽  
Limiting Factors ◽  
Current Status ◽  
Feed Production ◽  
The World ◽  
Market Trends ◽  
Alternative Sources ◽  
World Industry ◽  
First Time ◽  
A Current

The author of the article discloses the prospects of development of the world feed production for aquaculture based on the analysis of key innovative technological and market trends. The author specifies that shortage, high cost, low ecological compatibility of traditional raw materials - fish flour - are among major limiting factors in the development of production of feeds for aquaculture. This fact, in turn, limits sustainable development of aquaculture both in Russia, and in the world in general. The article presents the overview of a current status of the world industry of feed production in aquaculture, where the regional situation is studied, as well. For the first time, there is given the outlook of innovative technologies in feed production based on the alternative sources of protein (on the example of projects of leading aquabiotechnological companies) which will determine industry’s objectives for the mid-term perspective.

New challenges to the economic security of Russia and the world and counteraction methods

2020 ◽  
Vol 16 (7) ◽  
pp. 1246-1263
Author(s):  
S.B. Zainullin ◽  
O.A. Zainullina
Keyword(s):  
Economic Development ◽  
Economic Crisis ◽  
Economic Security ◽  
Economic Policies ◽  
Economic Decline ◽  
Current Crisis ◽  
Initial Stage ◽  
The World ◽  
Analysis And Synthesis ◽  
Global Threat

Subject. The 2020 economic crisis has become a global threat to the economic security of States, corporations and households. The elimination of this threat to economic security is a key priority of the State. Objectives. The article is dedicated to factors of the current crisis, both individually and in aggregate, as well as forecasts of the economic development during the crisis. Methods. The study is based on the scientific knowledge as dialectic, a combination of historical and logical unity, structural analysis, traditional methods of economic analysis and synthesis. Results. We carried out the comparative analysis of crisis theories, forecasted the economic development of the IMF, the World Bank, the Audit Chamber, and considered analytical agencies in dynamics, taking into account adjustments when the crisis manifests itself. Counteraction methods are reviewed from theoretical and practical perspectives. The article also analyzed the international expertise in crisis management. Conclusions and Relevance. The economic crisis was found to be at its initial stage, with negative scenarios being more probable. Proposed and implemented, local measures can mitigate the economic decline, prevent massive bankruptcies and a social explosion. Meanwhile, measures to restructure the economic policy may contribute to overcoming the crisis. The findings can be used by federal government bodies to adjust economic policies, develop programs and strategies for the socio-economic development of regions, and economic security strategies for corporations.

Intervenções de carreira ao longo da vida: perspectivas e desafios

2020 ◽  
Author(s):  
Iúri Novaes Luna ◽  
Valéria De Bettio Mattos
Keyword(s):  
Life Cycle ◽  
Human Development ◽  
National Literature ◽  
Research And Practice ◽  
Career Interventions ◽  
The World ◽  
Psychosocial Processes ◽  
Diversity Of Life ◽  
Professional Guidance ◽  
Central Purpose

This book, comprised of 13 chapters, presents papers which discuss the processes related to the career along one’s life cycle, from adolescents’ professional choices until processes of retirement. Notwithstanding the diversity of life and work contexts, present in the different chapters, they all somewhat correspond in their central purpose, presenting both perspectives and challenges related to contemporary career interventions. Some chapters address themes that are still seldom explored in national literature, while others discuss subjects that are long established in the area, however they are innovative. The authors study them in the context of changes in the world of work in the second decade of the 21st century, of the new career models and psychosocial processes that are linked to human development throughout life. The studies and practices in vocational guidance, career development and retirement, included in this book, are the results of research and practice in recent years carried out by professionals, professors and academics that in different ways have collaborated with the activities of LIOP - Laboratory of Information and Professional Guidance, at the Federal University of Santa Catarina.

Heterocycles in the Treatment of Neglected Tropical Diseases

2020 ◽  
Vol 27 ◽  
Author(s):  
Kush K. Maheshwari ◽  
Debasish Bandyopadhyay
Keyword(s):  
Developing Countries ◽  
Heterocyclic Compounds ◽  
Neglected Tropical Diseases ◽  
World Health ◽  
Current Status ◽  
Poor People ◽  
Tropical Diseases ◽  
Concise Review ◽  
The World ◽  
Health Organization

Background: Neglected tropical diseases (NTDs) affect a huge population of the world and majority of the victims belong to the poor community of the developing countries. Until now, the World Health Organization (WHO) has identified 20 tropical diseases as NTDs that must be addressed with high priority. However, many heterocyclic scaffolds have demonstrated potent therapeutic activity against several NTDs. Objective: There are three major objectives: (1) To discuss the causes, symptoms, and current status of all the 20 NTDs; (2) To explore the available heterocyclic drugs, and their mechanism of actions (if known) that are being used to treat NTDs; (3) To develop general awareness on NTDs among the medicinal/health research community and beyond. Methods: The 20 NTDs have been discussed according to their alphabetic orders along with the possible heterocyclic remedies. Current status of treatment with an emphasis on the heterocyclic drugs (commercially available and investigational) has been outlined. In addition, brief discussion of the impacts of NTDs on socio-economic condition is included. Results: NTDs are often difficult to diagnose and the problem is worsened by the unhealthy hygiene, improper awareness, and inadequate healthcare in the developing countries where these diseases primarily affect poor people. The statistics include duration of suffering, numbers affected, and access to healthcare and medication. The mechanism of actions of various heterocyclic drugs, if reported, have been briefly summarized. Conclusion: Scientists and pharmaceutical corporations should allocate more resources to reveal the in-depth mechanism of actions of many heterocyclic drugs that are currently being used for the treatment of NTDs. Analysis of current heterocyclic compounds and development of new medications can help in the fight to reduce/remove the devastating effects of NTDs. An opinion-based concise review has been presented. Based on available literature, this is the first effect to present all the 20 NTDs and related heterocyclic compounds under the same umbrella.

The chronicle of COVID-19: possible strategies to curb the pandemic

2020 ◽  
Vol 27 ◽  
Author(s):  
Rajesh Kumar ◽  
Seetha Harilal ◽  
Abdullah G. Al-Sehemi ◽  
Githa Elizabeth Mathew ◽  
Simone Carradori ◽  
...  
Keyword(s):  
Life Cycle ◽  
Research And Development ◽  
Vaccine Development ◽  
Therapeutic Strategies ◽  
Antiviral Drugs ◽  
Limited Data ◽  
Social Distancing ◽  
The World ◽  
Novel Virus ◽  
Day By Day

: COVID-19, an epidemic that emerged in Wuhan, has become a pandemic affecting worldwide and is in a rapidly evolving condition. Day by day, the confirmed cases and deaths are increasing many folds. SARS-CoV-2 is a novel virus; therefore, limited data are available to curb the disease. Epidemiological approaches, isolation, quarantine, social distancing, lockdown, and curfew are being employed to halt the spread of the disease. Individual and joint efforts all over the world are producing a wealth of data and information which are expected to produce therapeutic strategies against COVID-19. Current research focuses on the utilization of antiviral drugs, repurposing strategies, vaccine development as well as basic to advanced research about the organism and the infection. The review focuses on the life cycle, targets, and possible therapeutic strategies, which can lead to further research and development of COVID-19 therapy.

Sign in / Sign up

Export Citation Format

Share Document