scholarly journals Combining the Photocatalysis and Absorption Properties of Core-Shell Cu-BTC@TiO2 Microspheres: Highly Efficient Desulfurization of Thiophenic Compounds from Fuel

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2209 ◽  
Author(s):  
Jing Liu ◽  
Xiao-Min Li ◽  
Jing He ◽  
Lu-Ying Wang ◽  
Jian-Du Lei
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Photocatalytic Oxidation ◽  
Uv Light ◽  
Sulfur Removal ◽  
Oxidation Products ◽  
Core Shell ◽  
Adsorptive Desulfurization ◽  
X Ray ◽  
Tio2 Microspheres

A core-shell Cu-benzene-1,3,5-tricarboxylic acid (Cu-BTC)@TiO2 was successfully synthesized for photocatalysis-assisted adsorptive desulfurization to improve adsorptive desulfurization (ADS) performance. Under ultraviolet (UV) light irradiation, the TiO2 shell on the surface of Cu-BTC achieved photocatalytic oxidation of thiophenic S-compounds, and the Cu-BTC core adsorbed the oxidation products (sulfoxides and sulfones). The photocatalyst and adsorbent were combined using a distinct core-shell structure. The morphology and structure of the fabricated Cu-BTC@TiO2 microspheres were verified by scanning electron microscopy, high-resolution transmission electron microscopy, energy-dispersive x-ray spectroscopy, X-ray powder diffraction, nitrogen adsorption-desorption and X-ray photoelectron spectroscopy analyses. A potential formation mechanism of Cu-BTC@TiO2 is proposed based on complementary experiments. The sulfur removal efficiency of the microspheres was evaluated by selective adsorption of benzothiophene (BT) and dibenzothiophene (DBT) from a model fuel with a sulfur concentration of 1000 ppmw. Within a reaction time of 20 min, the BT and DBT conversion reached 86% and 95%, respectively, and achieved ADS capacities of 63.76 and 59.39 mg/g, respectively. The BT conversion and DBT conversion obtained using Cu-BTC@TiO2 was 6.5 and 4.6 times higher, respectively, than that obtained using Cu-BTC. A desulfurization mechanism was proposed, the interaction between thiophenic sulfur compounds and Cu-BTC@TiO2 microspheres was discussed, and the kinetic behavior was analyzed.

Enhanced ofloxacin degradation efficiency on porous CeTi2O6 photocatalyst-CTAB induced porosity

2020 ◽  
Vol 16 ◽  
Author(s):  
Lili Yang ◽  
Chuanguo Li ◽  
Wenjie Zhang
Keyword(s):  
Electron Microscopy ◽  
Porous Structure ◽  
Photocatalytic Degradation ◽  
Surface Area ◽  
Organic Pollutants ◽  
Photoelectron Spectroscopy ◽  
Photocatalytic Oxidation ◽  
Uv Light ◽  
Light Illumination ◽  
X Ray

BACKGROUND: Photocatalytic oxidation of organic pollutants in the environment has been studied for more than half a century. Titanate has the activity on degradation of organic pollutants under UV light illumination. Template directed sol-gel method is capable of producing porous structure in titanate during high temperature thermal treatment. METHODS: The materials were characterized using X-ray powder diffraction, transmission electron microscopy, scanning electron microscopy, surface area and pore size analyses, UV-Visible spectrometry, and X-ray photoelectron spectroscopy. Photocatalytic activity of the CeTi2O6 material was evaluated through ofloxacin degradation. RESULTS: Brannerite structured CeTi2O6 was the major component in the samples, and the addition of CTAB caused a slight growth of CeTi2O6 crystals. Porous structure formed in the porous sample after the removal of CTAB template, and the surface area and pore volume were greatly enlarged. The first order reaction rate constant for photocatalytic degradation of ofloxacin was 9.60×10-3 min-1 on the nonporous CeTi2O6 sample, and it was as large as 2.44×10-2 min-1 on the porous CeTi2O6 sample. The addition of CTAB can influence the physico-chemical properties of the porous CeTi2O6, such as the improved activity on photocatalytic degradation of ofloxacin. CONCLUSION: The CeTi2O6 samples were composed of majority brannerite CeTi2O6, and CeTi2O6 crystallite sizes for the nonporous and porous samples were 38.1 and 43.2 nm. The burning up of CTAB during calcination produced abundant pores in the porous material. After 50 min of reaction, photocatalytic degradation efficiencies on the nonporous and porous CeTi2O6 samples were 38.1% and 70.5%.

ROOM TEMPERATURE PHOTOLUMINESCENCE OF POLYCRYSTALLINE SIC PREPARED FROM CARBON-SATURATED SI MELT

2002 ◽  
Vol 16 (06n07) ◽  
pp. 1047-1051
Author(s):  
JIANPING MA ◽  
ZHIMING CHEN ◽  
GANG LU ◽  
MINGBIN YU ◽  
LIANMAO HANG ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Uv Light ◽  
X Ray Diffraction ◽  
X Ray ◽  
Room Temperature Photoluminescence ◽  
Composition And Structure ◽  
Light Excitation ◽  
Scanning Electron

Intense photoluminescence (PL) has been observed at room temperature from the polycrystalline SiC samples prepared from carbon-saturated Si melt at a temperature ranging from 1500 to 1650°C. Composition and structure of the samples have been confirmed by means of X-ray photoelectron spectroscopy, X-ray diffraction and scanning electron microscopy. PL measurements with 325 nm UV light excitation revealed that the room temperature PL spectrum of the samples consists of 3 luminescent bands, the peak energies of which are 2.38 eV, 2.77 eV and 3.06 eV, respectively. The 2.38 eV band is much stronger than the others. It is suggested that some extrinsic PL mechanisms associated with defect or interface states would be responsible to the intensive PL observed at room temperature.

scholarly journals Lead-Free BNT–BT0.08/CoFe2O4 Core–Shell Nanostructures with Potential Multifunctional Applications

Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 672
Author(s):  
Marin Cernea ◽  
Roxana Radu ◽  
Harvey Amorín ◽  
Simona Gabriela Greculeasa ◽  
Bogdan Stefan Vasile ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Molar Ratio ◽  
Transmission Electron Microscopy Data ◽  
Core Shell ◽  
Shell Nanoparticles ◽  
Two Phase ◽  
X Ray ◽  
Shell Nanostructures

Herein we report on novel multiferroic core–shell nanostructures of cobalt ferrite (CoFe2O4)–bismuth, sodium titanate doped with barium titanate (BNT–BT0.08), prepared by a two–step wet chemical procedure, using the sol–gel technique. The fraction of CoFe2O4 was varied from 1:0.5 to 1:1.5 = BNT–BT0.08/CoFe2O4 (molar ratio). X–ray diffraction confirmed the presence of both the spinel CoFe2O4 and the perovskite Bi0.5Na0.5TiO3 phases. Scanning electron microscopy analysis indicated that the diameter of the core–shell nanoparticles was between 15 and 40 nm. Transmission electron microscopy data showed two–phase composite nanostructures consisting of a BNT–BT0.08 core surrounded by a CoFe2O4 shell with an average thickness of 4–7 nm. Cole-Cole plots reveal the presence of grains and grain boundary effects in the BNT–BT0.08/CoFe2O4 composite. Moreover, the values of the dc conductivity were found to increase with the amount of CoFe2O4 semiconductive phase. Both X-ray photoelectron spectroscopy (XPS) and Mössbauer measurements have shown no change in the valence of the Fe3+, Co2+, Bi3+ and Ti4+ cations. This study provides a detailed insight into the magnetoelectric coupling of the multiferroic BNT–BT0.08/CoFe2O4 core–shell composite potentially suitable for magnetoelectric applications.

scholarly journals Fabrication and Characterization of Porous Core–Shell Graphene/SiO2 Nanocomposites for the Removal of Cationic Neutral Red Dye

2020 ◽  
Vol 10 (23) ◽  
pp. 8529
Author(s):  
Junyi Wang ◽  
Tianlu Chen ◽  
Biao Xu ◽  
Yueqiu Chen
Keyword(s):  
Electron Microscopy ◽  
Water Vapor ◽  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Neutral Red ◽  
Water Vapor Adsorption ◽  
Core Shell ◽  
X Ray ◽  
Adsorption Sites ◽  
Sio2 Nanocomposites

Porous rGO/SiO2 nanocomposites with a “core-shell” structure were prepared as an efficient adsorbent for the liquid-phase adsorption of cationic neutral red (NR) dye. The samples were characterized with powder X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TG), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and N2 and water vapor adsorption/desorption methods. The NR removal ability and kinetics of the adsorption process of SiO2 and the rGO/SiO2 nanocomposites were investigated at 298 K. The rGO/SiO2 nanocomposite SG 0.30 showed a superior adsorption of NR dye. In regard to NR at pH 5, we measured a superior adsorption capacity of 66.635 mg/g at an initial NR concentration of 50 mg/L. The experimental adsorption capacity of SG 0.30 was 3.791 times higher than that of SiO2. Then, we compared the results with similar materials used for NR removal. Moreover, the water adsorption sites provided by the nitrogen- and oxygen-containing groups might be one of the reasons for the increased adsorption of water vapor. The broad range of properties of the rGO/SiO2 nanocomposite, including its simple synthesis, ability to be mass prepared, and strong adsorption properties, makes it a truly novel adsorbent that can be industrially produced, and shows potential application in the treatment of wastewater-containing dyes.

Photocatalytic Oxidation of Alcohols Over Magnetically Recoverable Gold Supported Iron Oxide Nanoparticles

2019 ◽  
Vol 11 (12) ◽  
pp. 1731-1738 ◽  
Author(s):  
Ma Hui ◽  
Wu Juzhen ◽  
Zhao Li ◽  
Zhou Zheng ◽  
Guo Jiahu
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Photocatalytic Oxidation ◽  
Organic Dyes ◽  
Atomic Emission ◽  
One Pot ◽  
X Ray ◽  
Inductively Coupled ◽  
Oxidation Of Alcohols

A one-pot simple and efficient synthetic route for the synthesis of Au-loaded Fe2O3 nanoparticles was developed, and this material's photocatalytic activity for visible light assisted oxidation of alcohols and degradation of organic dye were studied. As-synthesized nanostructured catalyst was characterised by powder X-ray diffraction (XRD), transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), SEM-mapping, X-ray photoelectron spectroscopy (XPS), N2 adsorption–desorption isotherm (BET), and inductively coupled plasma-atomic emission spectroscopy (ICP-AES). It was observed that 5–10 nm Au-nanoparticles supported on 10–80 nm Fe2O3 shows boomerang-shaped nanoparticle. Gold loading of 1 wt% shows high conversion and selectivity towards the target product aldehyde. The synthesized nanomaterial also proved to be an excellent photocatalyst for degradation of organic dyes such as methylene blue (MB) and rhodamine B (RhB). The catalyst proved to be noteworthy as it does not loss in its catalytic activity even after five cycles of reuse.

Synthesis and Characterization of SiO2@Y2MoO6:Eu3+ Core–Shell Structured Spherical Phosphors by Sol–Gel Process

2016 ◽  
Vol 16 (4) ◽  
pp. 3914-3920 ◽  
Author(s):  
G. Z Li ◽  
F. H Liu ◽  
Z. S Chu ◽  
D. M Wu ◽  
L. B Yang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Annealing Temperature ◽  
Uv Light ◽  
Sol Gel ◽  
Spherical Shape ◽  
Core Shell ◽  
X Ray ◽  
Transmission Electron ◽  
Sol Gel Process ◽  
Average Size

SiO2@Y2MoO6:Eu3+ core–shell phosphors were prepared by the sol–gel process. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectra (EDS), transmission electron microscopy (TEM), photoluminescence (PL) spectra as well as kinetic decays were used to characterize the resulting SiO2@Y2MoO6:Eu3+ core–shell phosphors. The XRD results demonstrated that the Y2MoO6:Eu3+ layers on the SiO2 spheres crystallized after being annealed at 700 °C and the crystallinity increased with raising the annealing temperature. The obtained core–shell phosphors have spherical shape with narrow size distribution (average size ca. 640 nm), non-agglomeration, and smooth surface. The thickness of the Y2MoO6:Eu3+ shells on the SiO2 cores could be easily tailored by varying the number of deposition cycles (70 nm for four deposition cycles). The Eu3+ shows a strong PL emission (dominated by 5D0–7F2 red emission at 614 nm) under the excitation of 347 nm UV light. The PL intensity of Eu3+ increases with increasing the annealing temperature and the number of coating cycles.

Hydrothermal Synthesis and Photocatalytic Properties of Flower-Like CdS Nanostructures

2011 ◽  
Vol 335-336 ◽  
pp. 460-463 ◽  
Author(s):  
Hong Mei Wang ◽  
Da Peng Zhou ◽  
Yuan Lian ◽  
Ming Pang ◽  
Dan Liu
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Uv Light ◽  
Sulfur Source ◽  
X Ray Diffraction ◽  
Facile Hydrothermal Method ◽  
X Ray ◽  
Transmission Electron ◽  
Cds Nanostructures

Hexagonal flower-like CdS nanostructures were successfully synthesized through a facile hydrothermal method with thiourea as sulfur source. By combining the results of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), the structural and morphological characterizations of the products were performed. The photocatalytic activity of CdS nanostructures had been tested by degradation of Rhodamine B (RB) under UV light compared to commercial CdS powders, which indicated that the as-syntherized CdS nanostructures exhibited enhanced photocatalytic activity for degradation of RB. The possible growth mechanism of CdS nanostructures was proposed in the end.

ZnS NANOFLOWERS ON GRAPHENE FOR USE AS A HIGH-PERFORMANCE PHOTOCATALYST

NANO ◽  
2014 ◽  
Vol 09 (08) ◽  
pp. 1450097 ◽  
Author(s):  
ZENG BIN ◽  
LONG HUI
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
High Performance ◽  
Dye Degradation ◽  
Uv Light ◽  
Xps Spectra ◽  
X Ray ◽  
Transmission Electron ◽  
Photocatalytic Activities ◽  
Potential Applications

The nanocomposites of graphene loaded– ZnS nanoflowers (GR– ZnS ) had been successfully prepared. Materials were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectra (FTIR), photoluminescence (PL) and X-ray photoelectron spectroscopy (XPS) spectra. A possible formation mechanism of this architecture was proposed. The experimental results revealed that these nanoflowers exhibited excellent UV-light photocatalytic activities for pollutant methyl orange (MO) dye degradation. These new nanostructures were expected to show considerable potential applications in the water treatment.

Platinum Reduction Study on Pt/C Electro-catalysts for PEMFC

2013 ◽  
Vol 16 (3) ◽  
pp. 141-145
Author(s):  
M.L. Hernandez-Pichardo ◽  
R. Gonzalez-Huerta ◽  
P. del Angel ◽  
E. Palacios-Gonzalez ◽  
M. Tufiño-Velazquez ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Uv Light ◽  
Reducing Agents ◽  
Impregnation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Synthesis Conditions ◽  
Platinum Species ◽  
Scanning Electron

Platinum reduction on Pt/C catalysts was studied on samples prepared by the impregnation method using different Pt precursors and reducing agents such as ethanol, sodium borohydride and ethanol-UV light (photo-assisted reduction), in order to compare the efficiency of the different reducing agents. The influence of the reduction level of the platinum species on the electrochemical behavior of these catalysts has been determined. The catalysts were characterized by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and linear and cyclic voltammetry. The results show that the reduction level depends mainly on the platinum precursor. Moreover, it was found that the higher electrochemical activity was found using catalysts reduced with ethanol, whereas by using NaBH4 as the reducing agent, the total reduction of the platinum precursor is very difficult in same synthesis conditions. The analysis of the XPS results shows that samples reduced with ethanol presented the lower PtOx/Pt reduction ratio.

Characterization of Highly Luminescent LaPO4:Eu3+/LaPO4 One-Dimensional Core/Shell Heterostructures

2008 ◽  
Vol 8 (3) ◽  
pp. 1266-1271 ◽  
Author(s):  
Wenbo Bu ◽  
Jianlin Shi
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Core Shell ◽  
Trap States ◽  
Hydrothermal Conditions ◽  
One Dimensional ◽  
X Ray ◽  
Luminescence Efficiency ◽  
Transmission Electron

Highly luminescent LaPO4:Eu3+/LaPO4 one-dimensional (1D) core/shell heterostructures were successfully synthesized by a mild and simple self-aggregation process under refluxing or hydrothermal conditions. The resulting 1D core/shell heterostructures were characterized using a variety of techniques including X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), and X-ray photoelectron spectroscopy (XPS) to demonstrate successful coating by the crystalline LaPO4. In addition, a possible formation mechanism for this core/shell heterostructure was proposed. Finally, the photoluminescence property of the LaPO4:Eu3+/LaPO4 1D core/shell heterostructures was investigated in detail, which illustrates that the core/shell heterostructures remarkably increase the luminescence efficiency because the LaPO4 shells effectively eliminate surface trap-states and suppress the energy quenching in the energy-transfer processes.

Sign in / Sign up

Export Citation Format

Share Document