scholarly journals Amine-Grafted Mesoporous Carbons as Benzocaine-Delivery Platforms

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2188
Author(s):  
Joanna Goscianska ◽  
Aleksander Ejsmont ◽  
Anita Kubiak ◽  
Dominika Ludowicz ◽  
Anna Stasiłowicz ◽  
...  
Keyword(s):  
Release Kinetics ◽  
The Body ◽  
Therapeutic Drug ◽  
Mesoporous Carbons ◽  
Precise Control ◽  
Pharmaceutical Ingredients ◽  
Sorption Ability ◽  
Porous Carriers ◽  
Textural Parameters ◽  
Amine Groups

Smart porous carriers with defined structure and physicochemical properties are required for releasing the therapeutic drug with precise control of delivery time and location in the body. Due to their non-toxicity, ordered structure, and chemical and thermal stability, mesoporous carbons can be considered modern carriers for active pharmaceutical ingredients whose effectiveness needs frequent dosing algorithms. Here, the novel benzocaine delivery systems based on ordered mesoporous carbons of the cubic structure were obtained with the use of a hard template method and functionalization with amine groups at 40 °C for 8 h. It has been shown that amine grafting strongly modifies the surface chemistry and textural parameters of carbons. All samples indicated good sorption ability towards benzocaine, with evident improvement following the functionalization with the amine groups. The sorption capacity and drug release kinetics were strongly affected by the porosity of carbon carriers and the surface functional groups. The smallest amount of benzocaine (~12%) was released from pristine mesoporous carbon, which could be correlated with strong API–carrier interactions. Faster and more efficient release of the drug was observed in the case of triethylenetetramine modified carbon (~62%). All benzocaine delivery platforms based on amine-grafted mesoporous carbons revealed high permeability through the artificial membrane.

scholarly journals Trapping liquid drugs inside crystals

2014 ◽  
Vol 70 (a1) ◽  
pp. C984-C984
Author(s):  
Alessia Bacchi ◽  
Davide Capucci ◽  
Paolo Pelagatti
Keyword(s):  
Human Health ◽  
Crystal Engineering ◽  
Room Temperature ◽  
The Body ◽  
New Materials ◽  
Active Molecule ◽  
Crystalline Materials ◽  
Pharmaceutical Ingredients ◽  
Solid Dosage ◽  
Intellectual Properties

The objective of this work is to embed liquid or volatile pharmaceuticals inside crystalline materials, in order to tune their delivery properties in medicine or agrochemistry, and to explore new regulatory and intellectual properties issues. Liquid or volatile formulations of active pharmaceutical ingredients (APIs) are intrinsically less stable and durable than solid forms; in fact most drugs are formulated as solid dosage because they tend to be stable, reproducible, and amenable to purification. Most drugs and agrochemicals are manufactured and distributed as crystalline materials, and their action involves the delivery of the active molecule by a solubilization process either in the body or on the environment. However some important compounds for the human health or for the environment occur as liquids at room temperature. The formation of co-crystals has been demonstrated as a means of tuning solubility properties of solid phases, and therefore it is widely investigated by companies and by solid state scientists especially in the fields of pharmaceuticals, agrochemicals, pigments, dyestuffs, foods, and explosives. In spite of this extremely high interest towards co-crystallization as a tool to alter solubility, practically no emphasis has been paid to using it as a means to stabilize volatile or labile or low-melting products. In this work we trap and stabilize volatile and liquid APIs and agrochemicals in crystalline matrices by engineering suitable co-crystals. These new materials alter the physic state of the active ingredients allowing to expand the phase space accessible to manufacturing and delivery. We have defined a benchmark of molecules relevant to human health and environment that have been combined with suitable partners according to the well known methods of crystal engineering in order to obtain cocrystals. The first successful results will be discussed; the Figure shows a cocrystal of propofol, a worldwide use anesthetic.

scholarly journals Novel Hydrogels of Chitosan and Poly (vinyl alcohol) Reinforced with Inorganic Particles of Bioactive Glass

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 691
Author(s):  
O. Sánchez-Aguinagalde ◽  
Ainhoa Lejardi ◽  
Emilio Meaurio ◽  
Rebeca Hernández ◽  
Carmen Mijangos ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Drug Release ◽  
Bioactive Glass ◽  
Vinyl Alcohol ◽  
Release Kinetics ◽  
The Body ◽  
Poly Vinyl Alcohol ◽  
X Ray Diffraction ◽  
Inorganic Particles ◽  
Release Studies

Chitosan (CS) and poly (vinyl alcohol) (PVA) hydrogels, a polymeric system that shows a broad potential in biomedical applications, were developed. Despite the advantages they present, their mechanical properties are insufficient to support the loads that appear on the body. Thus, it was proposed to reinforce these gels with inorganic glass particles (BG) in order to improve mechanical properties and bioactivity and to see how this reinforcement affects levofloxacin drug release kinetics. Scanning electron microscopy (SEM), X-ray diffraction (XRD), swelling tests, rheology and drug release studies characterized the resulting hydrogels. The experimental results verified the bioactivity of these gels, showed an improvement of the mechanical properties and proved that the added bioactive glass does affect the release kinetics.

The relevance of therapeutic drug monitoring in plasma and erythrocytes in anti-cancer drug treatment

2004 ◽  
Vol 42 (11) ◽  
Author(s):  
Herlinde Dumez ◽  
Gunther Guetens ◽  
Gert De Boeck ◽  
Martin S. Highley ◽  
Robert A. A. Maes ◽  
...  
Keyword(s):  
Therapeutic Drug Monitoring ◽  
Drug Monitoring ◽  
Drug Transport ◽  
Free Fraction ◽  
The Body ◽  
Cancer Drug ◽  
Therapeutic Drug ◽  
Anti Cancer ◽  
Plasma Compartment ◽  
Made In

AbstractTherapeutic drug monitoring generally focuses on the plasma compartment only. Differentiation between the total plasma concentration and the free fraction (plasma water) has been described for a number of limited drugs. Besides the plasma compartment, blood has also a cellular fraction which has by far the largest theoretical surface and volume for drug transport. It is with anti-cancer drugs that major progress has been made in the study of partition between the largest cellular blood compartment, i.e., erythrocytes, and the plasma compartment. The aim of the present review is to detail the progress made in predicting what a drug does in the body, i.e., pharmacodynamics including toxicity and plasma and/or red blood cell concentration monitoring. Furthermore, techniques generally used in anti-cancer drug monitoring are highlighted. Data for complex Bayesian statistical approaches and population kinetics studies are beyond the scope of this review, since this is generally limited to the plasma compartment only.

Indian medicinal plants with antidiabetic potential: An overview

2021 ◽  
pp. 2328-2335
Author(s):  
Monika Sahu ◽  
Vinod Kumar ◽  
Veenu Joshi
Keyword(s):  
Diabetes Mellitus ◽  
Medicinal Plants ◽  
The Body ◽  
Therapeutic Drug ◽  
Major Health ◽  
Synthetic Drugs ◽  
Comprehensive Information ◽  
Chronic Disorders ◽  
The Rich ◽  
Indian Medicinal Plants

Diabetes Mellitus is the most prevalent metabolic disorder which has made it a major health threat worldwide. The available synthetic drugs for the cure of Diabetes mellitus are associated with high cost, various side effects and several limitations. Medicinal plants are the rich depots of the phytochemicals which can be useful for the treatment of chronic disorders. These plants are the better alternative to chemical drugs causing less or no harm to the body. Several plants are traditionally known for their antidiabetic properties but the detail investigation of their active molecules is required in order to be developed as therapeutic drug. Therefore, the present review aims to provide comprehensive information on various Indian medicinal plants, their constituents and mechanism of action for the cure of diabetes mellitus.

Encapsulation of lipid-based formulations in porous carriers for controlled drug delivery

2021 ◽  
Vol 28 ◽  
Author(s):  
Phuong H.L. Tran ◽  
Thao T.D. Tran
Keyword(s):  
Porous Materials ◽  
Controlled Drug Release ◽  
Water Soluble ◽  
Solid Dosage Forms ◽  
Pharmaceutical Ingredients ◽  
Solid Dosage ◽  
Water Soluble Drugs ◽  
Porous Carriers ◽  
Poorly Water Soluble ◽  
And Control

: Lipid-based formulations have recently been investigated as a promising approach to enhance the bioavailability of drugs, especially poorly water-soluble drugs. The encapsulation of lipid-based formulations in porous materials can result in a transformation of liquids or semisolid forms to solid dosage forms. Moreover, the specific structure of porous carriers could offer an enhanced ability to load and control active pharmaceutical ingredients. Although there have been prominent reports on lipid-based formulations and porous materials as promising technologies for controlled drug release, the overall methods of encapsulating lipid-based formulations need to be discussed for further formulation investigations. This review aims to present the key strategies used for producing porous carriers containing lipid-based formulations. We also discuss methods that enhance the encapsulation efficiency of loaded drugs within porous structures (instead of lipid-based formulations). Moreover, the critical factors that affect tablet formation are outlined. This overview of lipid-based formulations encapsulated within porous materials provides a summary of the technical methods used in the development of these formulations and their clinical translation.

A Wnt5a pathway underlies outgrowth of multiple structures in the vertebrate embryo

Development ◽  
1999 ◽  
Vol 126 (6) ◽  
pp. 1211-1223 ◽  
Author(s):  
T.P. Yamaguchi ◽  
A. Bradley ◽  
A.P. McMahon ◽  
S. Jones
Keyword(s):  
Progenitor Cells ◽  
Primitive Streak ◽  
The Body ◽  
Loss Of Function ◽  
Proliferating Cells ◽  
Precise Control ◽  
Cellular Processes ◽  
Cell Proliferation And Differentiation ◽  
Primary Body ◽  
Multiple Structures

Morphogenesis depends on the precise control of basic cellular processes such as cell proliferation and differentiation. Wnt5a may regulate these processes since it is expressed in a gradient at the caudal end of the growing embryo during gastrulation, and later in the distal-most aspect of several structures that extend from the body. A loss-of-function mutation of Wnt5a leads to an inability to extend the A-P axis due to a progressive reduction in the size of caudal structures. In the limbs, truncation of the proximal skeleton and absence of distal digits correlates with reduced proliferation of putative progenitor cells within the progress zone. However, expression of progress zone markers, and several genes implicated in distal outgrowth and patterning including Distalless, Hoxd and Fgf family members was not altered. Taken together with the outgrowth defects observed in the developing face, ears and genitals, our data indicates that Wnt5a regulates a pathway common to many structures whose development requires extension from the primary body axis. The reduced number of proliferating cells in both the progress zone and the primitive streak mesoderm suggests that one function of Wnt5a is to regulate the proliferation of progenitor cells.

scholarly journals Applications of Nanomaterials for Theranostics of Melanoma

2020 ◽  
Vol 1 (1) ◽  
pp. 39-55
Author(s):  
Guanqiao Jin ◽  
Pohlee Cheah ◽  
Jing Qu ◽  
Lijuan Liu ◽  
Yongfeng Zhao
Keyword(s):  
Drug Delivery ◽  
Molecular Imaging ◽  
Early Diagnosis ◽  
Real Time ◽  
Treatment Plan ◽  
Chemotherapeutic Agents ◽  
The Body ◽  
Diagnostic Methods ◽  
Therapeutic Drug

Melanoma is an aggressive form of skin cancer with a very high mortality rate. Early diagnosis of the disease, the utilization of more potent pharmacological agents, and more effective drug delivery systems are essential to achieve an optimal treatment plan. The applications of nanotechnology to improve therapeutic efficacy and early diagnosis for melanoma treatment have received great interest among researchers and clinicians. In this review, we summarize the recent progress of utilizing various nanomaterials for theranostics of melanoma. The key importance of using nanomaterials for theranostics of melanoma is to improve efficacy and reduce side effects, ensuring safe implementation in clinical use. As opposed to conventional in vitro diagnostic methods, in vivo medical imaging technologies have the advantages of being a type of non-invasive, real-time monitoring. Several common nanoparticles, including ultrasmall superparamagnetic iron oxide nanoparticles, silica nanoparticles, and carbon-based nanoparticles, have been applied to deliver chemotherapeutic agents for the theranostics of melanoma. The application of nanomaterials for theranostics in molecular imaging (MRI, PET, US, OI, etc.) plays an important role in targeting drug delivery of melanoma, by monitoring the distribution site of the molecular imaging probe and the therapeutic drug in the body in real-time. Hence, it is worthwhile to anticipate the approval of these nanomaterials for theranostics in molecular imaging by the US Food and Drug Administration in clinical trials.

Programmable Release of Berberine Chloride Hydrate from Shape Memory Fibers Prepared from Core-Sheath Wet-Spinning Technology

2019 ◽  
Vol 15 (7) ◽  
pp. 1432-1442 ◽  
Author(s):  
Jiamin Tang ◽  
Ruifang Zhao ◽  
Xueqian Yin ◽  
Ya Wen ◽  
Yidong Shi ◽  
...  
Keyword(s):  
Shape Memory ◽  
Release Kinetics ◽  
Drug Carrier ◽  
Wet Spinning ◽  
Therapeutic Drug ◽  
Composite Fibers ◽  
Practical Applications ◽  
Berberine Chloride ◽  
Chloride Hydrate

Smart wet-spun fibers for highly programmable release of therapeutic drug have been rarely reported. Herein, thermalresponsive composite fibers were successfully prepared by core-sheath wet-spinning technology in present study. They consisted of a model drug of natural antibacterial berberine chloride hydrate (BCH) and a drug carrier of temperature responsive shape memory polyurethane (SMPU). The obtained composite fibers featured with well-controlled microscopic morphologies, exhibiting significantly enhanced thermal stability and superb mechanical properties. In vitro drug release test and corresponding release kinetics study were performed for investigation of BCH's release behavior. Results demonstrated that the release behaviors of BCH from the core-sheath fibers were pH-dependent, influenced by both diffusion from pore channels and the solubility of BCH in the release mediums, and BCH imbedded only in core part showed a longer release period compared with that in both core and sheath parts of the composite fibers. More importantly, the release rate of BCH can be simply controlled by changing the initial shapes of fibers through stretching and fixation of the stretched deformations. Furthermore, the antibacterial durability of the smart composites fibers was demonstrated and tracked according to the growth inhibition against both negative E. coli and positive S. aureus bacteria strains. All these results suggest that the developed composite fibers can be promising candidates as smart drug delivery vehicles for highly adjustable doses of target drugs towards practical applications.

Synthesis and SEM Analysis of Ketoprofen-Hidroxipropil-β-Cyclodextrin Microparticles for Medical Applications as Drug-Release System with a High Bioavailability

2013 ◽  
Vol 325-326 ◽  
pp. 106-110
Author(s):  
Monica Stamate Cretan ◽  
Corneliu Munteanu ◽  
Eliza Gafitanu ◽  
Andreea Carmen Barbinta ◽  
Ciprian Stamate
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Sem Analysis ◽  
The Body ◽  
Basic Unit ◽  
Therapeutic Drug ◽  
Release System ◽  
Drug Release System

Drug-release systems are studied lately for increasing absorption in the body and improve the therapeutic effectiveness is key objective. Whatever form it may take a drug release system: tablet, implant, injectable suspension or transdermal system, the basic unit on which effective therapeutic drug particle. Knowledge of particle size distribution in a disperse system is of great importance in pharmaceutical technology. The size, surface area and volume-surface particle may be relevant to the physical, chemical and pharmacological drug toxicities. Stability and speed of dissolution of ketoprofen are much reduced in pure and coupled with a solubility promoter, enhances the bioavailability and particle size distribution depends. In order to improve absorption properties of ketoprofen were synthesized drug microparticles containing ketoprofen and hydroxypropyl beta cyclodextrin. Drug microparticles were studied by SEM microscopy and the results correlated with solubility properties. It was found that microparticles obtained are more easily soluble than pure ketoprofen and small size increases bioavailability.

Sign in / Sign up

Export Citation Format

Share Document