scholarly journals Study of the Impact of Graphite Orientation and Ion Transport on EDLC Performance

Materials ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 155
Author(s):  
Joseph M. Gallet de St Aurin ◽  
Jonathan Phillips
Keyword(s):  
Ion Transport ◽  
Surface Area ◽  
Power Density ◽  
Series Resistance ◽  
Salt Bridge ◽  
Orientation Degree ◽  
Model Study ◽  
Double Layer Capacitor ◽  
The Impact ◽  
Energy And Power Density

A model study of electric double layer capacitor (EDLC)-style capacitors in which the electrodes were composed of low surface area-oriented flakes of graphite that compressed to form a paper-like morphology has suggested that ion transport rates significantly impact EDLC energy and power density. Twelve capacitors were constructed, each using the same model electrode material and the same aqueous NaCl electrolyte, but differing in relative electrode orientation, degree of electrode compression, and presence/absence of an ionic transport salt bridge. All were tested with a galvanostat over a range of discharge currents. Significant differences in energy and power density and estimated series resistance were found as a function of all the factors listed, indicating that capacitor performance is not simply a function of the electrode surface area. This simple postulation was advanced and tested against data: net ion (Na+, Cl−) ‘velocity’ during both charge and discharge significantly impacts capacitive performance.

scholarly journals The Effect of Increasing Surface Area of Graphite Electrode on the Performance of Dual Chamber Microbial Fuel Cells

2017 ◽  
Vol 1 ◽  
pp. 137-140
Author(s):  
Pedy Artsanti ◽  
Sudarlin Sudarlin ◽  
Eka Fadzillah Kirana
Keyword(s):  
Fuel Cells ◽  
Surface Area ◽  
Power Density ◽  
Microbial Fuel Cells ◽  
Textile Industry ◽  
Graphite Electrode ◽  
Salt Bridge ◽  
Anode Chamber ◽  
Dual Chamber ◽  
Real Wastewater

The effect of increasing surface area of graphite electrode on the performance of dual chamber Microbial Fuel Cells (MFC) was observed. The surface area of graphite electrode (anode and cathode) that was using in this experiment was 29.5cm2 and 44.5cm2 for the A and B reactor, respectively. The anode chamber contained mixed microorganism culture from real wastewater of textile industry and the cathode chamber contained 0.1M potassium permanganate electrolyte solution. The salt bridge was required to stabilize the charge between the anode and cathode chambers, and the electrodes attached to the anode and cathode chambers as the electron catcher. Both, the A and B reactor were observed for 72 hours of running time. The voltage and power density were found to increase with the increase in surface area of the graphite electrode. The highest power density was 93.93mWm-2 and 197.23mWm-2 that obtained at 36 hours and 48 hours on the A and B reactor, respectively. At the end of experiment, these MFCs system could also reduce COD by 28.6% and 15.6% on A and B reactor, respectively.

scholarly journals EFFECT OF BALL MILLING ON PEAK CURRENT AND EQUIVALENT SERIES RESISTANCE OF METAL OXIDE BASED ELECTROCHEMICAL DOUBLE LAYER CAPACITOR

2014 ◽  
pp. 270-273
Author(s):  
ATUL KUMAR SINGH ◽  
ANKIT DHIMAN ◽  
ANAM KAMAL
Keyword(s):  
Low Power ◽  
Ball Milling ◽  
Power Density ◽  
Double Layer ◽  
Series Resistance ◽  
Equivalent Series Resistance ◽  
Peak Current ◽  
Double Layer Capacitor ◽  
Electrochemical Double Layer Capacitor ◽  
Electrochemical Double Layer

Recently, advances have been made in improving both energy and power density of energy storing devices. Electrochemical Double Layer capacitor (EDLC) is one of the technologies that we are looking forward to fulfill the low power- low energy applications such as memory back up. ELDC is mainly a pulse power device even though it is seen as a replacement to battery in low power applications. At present EDLC technology is under development stage. Power density, energy density, specific capacitance, internal resistances are required to be improved. Electrochemistry plays a crucial role in the storage as well as in the generation of energy. Hence, the particles size and distribution are need to be optimized. Ball milling is the tool for optimizing the size of the components used to make the EDLCs. Ball milling has significant effect on the various parameters of the EDLC. It was found that as we increase the time of ball milling the Equivalent Series Resistance (ESR) decreases and the peak current increases. But he changes are significant for higher time of ball milling.

Evaluation of Nanotechniques and Conventional Techniques for the Removal of Dioxins

2018 ◽  
Vol 9 (1) ◽  
pp. 79-84
Author(s):  
Vaishali V. Shahare ◽  
Rajni Grover ◽  
Suman Meena
Keyword(s):  
Soil Sample ◽  
Human Health ◽  
Surface Area ◽  
Contaminated Soil ◽  
Conventional Treatment ◽  
Volume Ratio ◽  
Soil Samples ◽  
Dioxins And Furans ◽  
Palladized Iron ◽  
The Impact

Background: The persistent dioxins/furans has caused a worldwide concern as they influence the human health. Recent research indicates that nonmaterial may prove effective in the degradation of Dioxins/furans. The nanomaterials are very reactive owing to their large surface area to volume ratio and large number of reactive sites. However, nanotechnology applications face both the challenges and the opportunities to influence the area of environmental protection. Objective: i) To study the impact of oil mediated UV-irradiations on the removal of 2,3,7,8-TCDD, 2,3,7,8-TCDF, OCDD and OCDF in simulated soil samples. ii) To compare the conventional treatment methods with the modern available nanotechniques for the removal of selected Dioxins/furans from soil samples. Methods: The present work has investigated an opportunity of the degradation of tetra and octachlorinated dioxins and furans by using oil mediated UV radiations with subsequent extraction of respective dioxins/furans from soils. The results have been compared with the available nanotechniques. Results: The dioxin congeners in the simulated soil sample showed decrease in concentration with the increase in the exposure time and intensity of UV radiations. The dechlorination of PCDD/Fs using palladized iron has been found to be effective. Conclusion: Both the conventional methods and nanotechnology have a dramatic impact on the removal of Dioxins/furans in contaminated soil. However, the nanotechniques are comparatively costlier and despite the relatively high rates of PCDDs dechlorination by Pd/nFe, small fraction of the dioxins are recalcitrant to degradation over considerable exposure times.

Thermal-aware Output Polarity Selection Based on And-Inverter Graph Manipulation

2019 ◽  
Vol 12 (1) ◽  
pp. 30-39 ◽  
Author(s):  
Apangshu Das ◽  
Sambhu Nath Pradhan
Keyword(s):  
Integrated Circuits ◽  
Power Density ◽  
Logic Synthesis ◽  
Programmable Logic Arrays ◽  
Power Switching ◽  
Nsga Ii ◽  
Multi Level ◽  
Search Approach ◽  
Efficient Power ◽  
The Impact

Background: Output polarity of the sub-function is generally considered to reduce the area and power of a circuit at the two-level realization. Along with area and power, the power-density is also one of the significant parameter which needs to be consider, because power-density directly converges to circuit temperature. More than 50% of the modern day integrated circuits are damaged due to excessive overheating. Methods: This work demonstrates the impact of efficient power density based logic synthesis (in the form of suitable polarity selection of sub-function of Programmable Logic Arrays (PLAs) for its multilevel realization) for the reduction of temperature. Two-level PLA optimization using output polarity selection is considered first and compared with other existing techniques and then And-Invert Graphs (AIG) based multi-level realization has been considered to overcome the redundant solution generated in two-level synthesis. AIG nodes and associated power dissipation can be reduced by rewriting, refactoring and balancing technique. Reduction of nodes leads to the reduction of the area but on the contrary increases power and power density of the circuit. A meta-heuristic search approach i.e., Nondominated Sorting Genetic Algorithm-II (NSGA-II) is proposed to select the suitable output polarity of PLA sub-functions for its optimal realization. Results: Best power density based solution saves up to 8.29% power density compared to ‘espresso – dopo’ based solutions. Around 9.57% saving in area and 9.67% saving in power (switching activity) are obtained with respect to ‘espresso’ based solution using NSGA-II. Conclusion: Suitable output polarity realized circuit is converted into multi-level AIG structure and synthesized to overcome the redundant solution at the two-level circuit. It is observed that with the increase in power density, the temperature of a particular circuit is also increases.

scholarly journals Towards explicit regulating-ion-transport: nanochannels with only function-elements at outer-surface

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Qun Ma ◽  
Yu Li ◽  
Rongsheng Wang ◽  
Hongquan Xu ◽  
Qiujiao Du ◽  
...  
Keyword(s):  
Ion Transport ◽  
Numerical Simulations ◽  
Power Density ◽  
Outer Surface ◽  
Internal Resistance ◽  
Porous Membranes ◽  
Two Dimensional ◽  
Ionic Selectivity ◽  
Key Features ◽  
Energy Conversion Devices

AbstractFunction elements (FE) are vital components of nanochannel-systems for artificially regulating ion transport. Conventionally, the FE at inner wall (FEIW) of nanochannel−systems are of concern owing to their recognized effect on the compression of ionic passageways. However, their properties are inexplicit or generally presumed from the properties of the FE at outer surface (FEOS), which will bring potential errors. Here, we show that the FEOS independently regulate ion transport in a nanochannel−system without FEIW. The numerical simulations, assigned the measured parameters of FEOS to the Poisson and Nernst-Planck (PNP) equations, are well fitted with the experiments, indicating the generally explicit regulating-ion-transport accomplished by FEOS without FEIW. Meanwhile, the FEOS fulfill the key features of the pervious nanochannel systems on regulating-ion-transport in osmotic energy conversion devices and biosensors, and show advantages to (1) promote power density through concentrating FE at outer surface, bringing increase of ionic selectivity but no obvious change in internal resistance; (2) accommodate probes or targets with size beyond the diameter of nanochannels. Nanochannel-systems with only FEOS of explicit properties provide a quantitative platform for studying substrate transport phenomena through nanoconfined space, including nanopores, nanochannels, nanopipettes, porous membranes and two-dimensional channels.

scholarly journals Suitability of Bronchoscopic Biopsy Tissue Samples for Next-Generation Sequencing

Diagnostics ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 391
Author(s):  
Shuji Murakami ◽  
Tomoyuki Yokose ◽  
Daiji Nemoto ◽  
Masaki Suzuki ◽  
Ryou Usui ◽  
...  
Keyword(s):  
Next Generation Sequencing ◽  
Success Rate ◽  
Rna Sequencing ◽  
Surface Area ◽  
Endobronchial Ultrasound ◽  
Next Generation ◽  
Endobronchial Ultrasonography ◽  
Tissue Surface ◽  
The Impact ◽  
Generation Sequencing

A sufficiently large tissue sample is required to perform next-generation sequencing (NGS) with a high success rate, but the majority of patients with advanced non-small-cell lung cancer (NSCLC) are diagnosed with small biopsy specimens. Biopsy samples were collected from 184 patients with bronchoscopically diagnosed NSCLC. The tissue surface area, tumor cell count, and tumor content rate of each biopsy sample were evaluated. The impact of the cut-off criteria for the tissue surface area (≥1 mm2) and tumor content rate (≥30%) on the success rate of the Oncomine Dx Target Test (ODxTT) was evaluated. The mean tissue surface area of the transbronchial biopsies was 1.23 ± 0.85 mm2 when small endobronchial ultrasonography with a guide sheath (EBUS-GS) was used, 2.16 ± 1.49 mm2 with large EBUS-GS, and 1.81 ± 0.75 mm2 with endobronchial biopsy (EBB). The proportion of samples with a tissue surface area of ≥1 mm2 was 48.8% for small EBUS-GS, 79.2% for large EBUS-GS, and 78.6% for EBB. Sixty-nine patients underwent ODxTT. The success rate of DNA sequencing was 84.1% and that of RNA sequencing was 92.7% over all patients. The success rate of DNA (RNA) sequencing was 57.1% (71.4%) for small EBUS-GS (n = 14), 93.4% (96.9%) for large EBUS-GS (n = 32), 62.5% (100%) for EBB (n = 8), and 100% (100%) for endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA) (n = 15). Regardless of the device used, a tissue surface area of ≥ 1 mm2 is adequate for samples to be tested with NGS.

scholarly journals In-Situ Measurement of Power Loss for Crystalline Silicon Modules Undergoing Thermal Cycling and Mechanical Loading Stress Testing

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 72
Author(s):  
Sergiu Spataru ◽  
Peter Hacke ◽  
Dezso Sera
Keyword(s):  
Thermal Cycling ◽  
Power Loss ◽  
Stress Testing ◽  
Series Resistance ◽  
Short Circuit ◽  
In Situ Measurement ◽  
Mechanical Degradation ◽  
Model Parameters ◽  
The Impact

An in-situ method is proposed for monitoring and estimating the power degradation of mc-Si photovoltaic (PV) modules undergoing thermo-mechanical degradation tests that primarily manifest through cell cracking, such as mechanical load tests, thermal cycling and humidity freeze tests. The method is based on in-situ measurement of the module’s dark current-voltage (I-V) characteristic curve during the stress test, as well as initial and final module flash testing on a Sun simulator. The method uses superposition of the dark I-V curve with final flash test module short-circuit current to account for shunt and junction recombination losses, as well as series resistance estimation from the in-situ measured dark I-Vs and final flash test measurements. The method is developed based on mc-Si standard modules undergoing several stages of thermo-mechanical stress testing and degradation, for which we investigate the impact of the degradation on the modules light I-V curve parameters, and equivalent solar cell model parameters. Experimental validation of the method on the modules tested shows good agreement between the in-situ estimated power degradation and the flash test measured power loss of the modules, of up to 4.31 % error (RMSE), as the modules experience primarily junction defect recombination and increased series resistance losses. However, the application of the method will be limited for modules experiencing extensive photo-current degradation or delamination, which are not well reflected in the dark I-V characteristic of the PV module.

scholarly journals Effect of Secondary Carbon Nanofillers on the Electrical, Thermal, and Mechanical Properties of Conductive Hybrid Composites Based on Epoxy Resin and Graphite

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4169
Author(s):  
Marcel Zambrzycki ◽  
Krystian Sokolowski ◽  
Maciej Gubernat ◽  
Aneta Fraczek-Szczypta
Keyword(s):  
Mechanical Properties ◽  
Specific Surface ◽  
Epoxy Resin ◽  
Surface Area ◽  
Specific Surface Area ◽  
Hybrid Composites ◽  
Department Of Energy ◽  
Carbon Nanofillers ◽  
The Impact ◽  
Secondary Carbon

In this work, we present a comparative study of the impact of secondary carbon nanofillers on the electrical and thermal conductivity, thermal stability, and mechanical properties of hybrid conductive polymer composites (CPC) based on high loadings of synthetic graphite and epoxy resin. Two different carbon nanofillers were chosen for the investigation—low-cost multi-layered graphene nanoplatelets (GN) and carbon black (CB), which were aimed at improving the overall performance of composites. The samples were obtained by a simple, inexpensive, and effective compression molding technique, and were investigated by the means of, i.a., scanning electron microscopy, Raman spectroscopy, electrical conductivity measurements, laser flash analysis, and thermogravimetry. The tests performed revealed that, due to the exceptional electronic transport properties of GN, its relatively low specific surface area, good aspect ratio, and nanometric sizes of particles, a notable improvement in the overall characteristics of the composites (best results for 4 wt % of GN; σ = 266.7 S cm−1; λ = 40.6 W mK−1; fl. strength = 40.1 MPa). In turn, the addition of CB resulted in a limited improvement in mechanical properties, and a deterioration in electrical and thermal properties, mainly due to the too high specific surface area of this nanofiller. The results obtained were compared with US Department of Energy recommendations regarding properties of materials for bipolar plates in fuel cells. As shown, the materials developed significantly exceed the recommended values of the majority of the most important parameters, indicating high potential application of the composites obtained.

Sign in / Sign up

Export Citation Format

Share Document