scholarly journals Biocompatibility Computation of Muscle Cells on Polyhedral Oligomeric Silsesquioxane-Grafted Polyurethane Nanomatrix

Nanomaterials ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 2966
Author(s):  
Touseef Amna ◽  
Mallick Shamshi Hassan ◽  
Mohamed H. El-Newehy ◽  
Tariq Alghamdi ◽  
Meera Moydeen Abdulhameed ◽  
...  
Keyword(s):  
Fiber Diameter ◽  
Polyhedral Oligomeric Silsesquioxane ◽  
Cellular Responses ◽  
X Ray Diffraction ◽  
X Ray ◽  
Physicochemical Investigation ◽  
Biomimetic Scaffolds ◽  
Myoblast Cell ◽  
Oligomeric Silsesquioxane

This study was performed to appraise the biocompatibility of polyhedral oligomeric silsesquioxane (POSS)-grafted polyurethane (PU) nanocomposites as potential materials for muscle tissue renewal. POSS nanoparticles demonstrate effectual nucleation and cause noteworthy enhancement in mechanical and thermal steadiness as well as biocompatibility of resultant composites. Electrospun, well-aligned, POSS-grafted PU nanofibers were prepared. Physicochemical investigation was conducted using several experimental techniques, including scanning electron microscopy, energy dispersive X-ray spectroscopy, electron probe microanalysis, Fourier transform infrared spectroscopy, and X-ray diffraction pattern. Adding POSS molecules to PU did not influence the processability and morphology of the nanocomposite; however, we observed an obvious mean reduction in fiber diameter, which amplified specific areas of the POSS-grafted PU. Prospective biomedical uses of nanocomposite were also appraised for myoblast cell differentiation in vitro. Little is known about C2C12 cellular responses to PU, and there is no information regarding their interaction with POSS-grafted PU. The antimicrobial potential, anchorage, proliferation, communication, and differentiation of C2C12 on PU and POSS-grafted PU were investigated in this study. In conclusion, preliminary nanocomposites depicted superior cell adhesion due to the elevated free energy of POSS molecules and anti-inflammatory potential. These nanofibers were non-hazardous, and, as such, biomimetic scaffolds show high potential for cellular studies and muscle regeneration.

Studies of Cell Growth on TiO2 Nanotubes

2012 ◽  
Vol 620 ◽  
pp. 325-329 ◽  
Author(s):  
Nur Hidayati Ahmad Barudin ◽  
Srimala Sreekantan ◽  
Ong Ming Thong ◽  
Lam Kit Lay
Keyword(s):  
Cancer Cell Line ◽  
Cellular Responses ◽  
Cell Interaction ◽  
Electrochemical Anodization ◽  
X Ray Diffraction ◽  
Cell Adherence ◽  
Anodization Voltage ◽  
X Ray ◽  
Mcf 7

The in vitro cell response was investigated on flat Ti surface vs nanostructured TiO2 nanotube surface. The titanium dioxide nanotube layers were prepared by electrochemical anodization of Ti in ethylene glycol, 5 wt% NH4F and 1ml H2O2. The nanotube layered structure and morphology were characterized using X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). The diameter and the length of the nanotubes are found to increase with anodization voltage. Hs27 and breast cancer cell line MCF-7 were used for cell interaction studies. Different surfaces of titanium show variation in term of growth and viability of cells. Different cell type also show different cellular responses to these surfaces. Titanium nanotube with tube diameter 90 nm promoted normal cell adherence and spreading but killed the cancer cells. The detail of the observation is discussed thoroughly in this paper.

Influence of Functionality of Polyhedral Oligomeric Silsesquioxane (POSS) Dispersed in Epoxy Resin for Application in Hybrid Coating

2017 ◽  
Vol 899 ◽  
pp. 278-282 ◽  
Author(s):  
Marielen Longhi ◽  
Vinicius Pistor ◽  
Lucas Pandolphi Zini ◽  
Sandra Raquel Kunst ◽  
Ademir José Zattera
Keyword(s):  
Epoxy Resin ◽  
Polyhedral Oligomeric Silsesquioxane ◽  
Xrd Analysis ◽  
Mechanical Analysis ◽  
Diglycidyl Ether ◽  
Hybrid Coating ◽  
X Ray Diffraction ◽  
Characteristic Peak ◽  
X Ray ◽  
Oligomeric Silsesquioxane

The present study aimed to characterize the structure of nanocomposites obtained from the incorporation of three different polyhedral oligomeric silsesquioxane (POSS) in an epoxy resin. glycidylisobutyl-POSS, triglycidylisobutyl-POSS and glycidyl-POSS were added (5% by weight) in an epoxy matrix, diglycidyl ether of bisphenol-A (DGEBA), through a sonication process. The nanocomposites were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and dynamic mechanical analysis (DMA). The XRD analysis presented a characteristic peak of POSS. The incorporation of glycidylisobutyl-POSS showed a significant increase in the value of glass transition temperature (Tg), being also the most effective in terms of dispersion. It should also be noted that glycidyl-POSS presented a greater influence on the thermal stability.

Synthesis of a phosphorus-containing trisilanol POSS and its application in RTV composites

e-Polymers ◽  
2018 ◽  
Vol 18 (3) ◽  
pp. 237-245 ◽  
Author(s):  
Ding Yaoke ◽  
Zhanglin Yuan ◽  
Jincheng Wang
Keyword(s):  
Tensile Strength ◽  
Room Temperature ◽  
Polyhedral Oligomeric Silsesquioxane ◽  
Fire Retardant ◽  
X Ray Diffraction ◽  
Elongation At Break ◽  
X Ray ◽  
H Nmr ◽  
Phosphorus Containing ◽  
Oligomeric Silsesquioxane

AbstractA novel trisilanol polyhedral oligomeric silsesquioxane-containing phosphorus (DPCP-TPOSS) was synthesized from trisilanolphenyl polyhedral oligomeric silsesquioxane (TPOSS) and diphenyl chlorophosphate. DPCP-TPOSS was characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), hydrogen nuclear magnetic resonance (1H-NMR), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). Then a novel type of room-temperature vulcanized silicone rubber (RTV)/DPCP-TPOSS composite was prepared. Properties such as swelling behavior, tensile strength, elongation at break, thermal stability and flame retardance were researched and compared. Results showed that RTV/DPCP-TPOSS-3 and RTV/DPCP-TPOSS-5 composites exhibited the best tensile strength and elongation at break, 4.5 MPa and 427%, which was 25% and 32% higher than that of pure RTV. TGA tests demonstrated that RTV/DPCP-TPOSS-3 owned the highest char residues, 39.7%. Tmax of RTV composites was increased from 531.9°C to 557°C with the incorporation of DPCP-TPOSS. Moreover, the addition of DPCP-TPOSS led to considerably increase of the fire-retardant performance.

A study on using expanded perlite with hydroxyapatite: Reinforced bio-composites

2021 ◽  
pp. 095441192199656
Author(s):  
Erdoğan Karip ◽  
Mehtap Muratoğlu
Keyword(s):  
Body Fluid ◽  
Xrd Analysis ◽  
Cold Isostatic Pressing ◽  
Expanded Perlite ◽  
X Ray Diffraction ◽  
Pressing Method ◽  
X Ray ◽  
Infra Red ◽  
Ft Ir

People are exposed to different kinds of diseases or various accidents in life. Hydroxyapatite (HA) has been widely employed for bone treatment applications. In this study, HA was extracted from sheep bones. Bio-composites were doped with 1, 5, and 10 wt.% of expanded perlite and 5 wt.% of ZrO2–MgO-P2O5. The bio-composites were prepared by the cold isostatic pressing method (250 MPa) and sintered at 900°C for 1 h. In order to evaluate the characteristics of the bio-composites, microhardness, density, X-ray diffraction (XRD), Fourier transform infra-red spectroscopy (FT-IR), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS) analyses were carried out on them. Additionally, the specimens whose characteristics were determined were kept in synthetic body fluid (SBF), and their in vitro behavior was examined. As a result, it was observed that microhardness increased as both the weight and the grain size of the expanded perlite were increased. Calcium silicate, tri-calcium phosphate, and hydroxyapatite were observed in the XRD analysis of all samples, and the formation of apatite structures was increased by addition of ZrO2–MgO–P2O5.

scholarly journals Electrospun Membranes Based on Polycaprolactone, Nano-Hydroxyapatite and Metronidazole

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 931
Author(s):  
Ioana-Codruţa Mirică ◽  
Gabriel Furtos ◽  
Ondine Lucaciu ◽  
Petru Pascuta ◽  
Mihaela Vlassa ◽  
...  
Keyword(s):  
Fiber Diameter ◽  
Maximum Load ◽  
Guided Bone Regeneration ◽  
Attenuated Total Reflectance ◽  
X Ray Diffraction ◽  
Sem Images ◽  
Total Reflectance ◽  
X Ray ◽  
Electrospun Membranes

The aim of this research was to develop new electrospun membranes (EMs) based on polycaprolactone (PCL) with or without metronidazole (MET)/nano-hydroxyapatite (nHAP) content. New nHAP with a mean diameter of 34 nm in length was synthesized. X-ray diffraction (XRD) and attenuated total reflectance Fourier transform infrared spectroscopy (FTIR-ATR) were used for structural characterization of precursors and EMs. The highest mechanical properties (the force at maximum load, Young’s modulus and tensile strength) were found for the PCL membranes, and these properties decreased for the other samples in the following order: 95% PCL + 5% nHAP > 80% PCL + 20% MET > 75% PCL + 5% nHAP + 20% MET. The stiffness increased with the addition of 5 wt.% nHAP. The SEM images of EMs showed randomly oriented bead-free fibers that generated a porous structure with interconnected macropores. The fiber diameter showed values between 2 and 16 µm. The fiber diameter increased with the addition of nHAP filler and decreased when MET was added. New EMs with nHAP and MET could be promising materials for guided bone regeneration or tissue engineering.

Fabrication and evaluation of calcium phosphate cement scaffold with controlled internal channel architecture and complex shape

2007 ◽  
Vol 221 (8) ◽  
pp. 951-958 ◽  
Author(s):  
X Li ◽  
D Li ◽  
B Lu ◽  
L Wang ◽  
Z Wang
Keyword(s):  
Tissue Engineering ◽  
Calcium Phosphate ◽  
Calcium Phosphate Cement ◽  
Complex Shape ◽  
X Ray Diffraction ◽  
X Ray ◽  
Precise Control ◽  
Internal Channel ◽  
Channel Architecture

The ability to have precise control over internal channel architecture, porosity, and external shape is essential for tissue engineering. The feasibility of using indirect stereo-lithography (SL) to produce scaffolds from calcium phosphate cement materials for bone tissue engineering has been investigated. The internal channel architecture of the scaffolds was created by removal of the negative resin moulds made with SL. Scanning electron microscopy (SEM) showed highly open, well-interconnected channel architecture. The X-ray diffraction examination revealed that the hydroxyapatite phase formed at room temperature in the cement was basically stable up to 850 °C. There was no phase decomposition of hydroxyapatite, although the crystallinity and grain size were different. The ability of resulting structure to support osteoblastic cells culture was tested in vitro. Cells were evenly distributed on exterior surfaces and grew into the internal channels of scaffolds. To exploit the ability of this technique, anatomically shaped femoral supracondylar scaffolds with 300-800 μm interconnected channels were produced and characterized.

A Novel Missense Mutation (p.P52R) in Amelogenin Gene Causing X-linked Amelogenesis Imperfecta

2007 ◽  
Vol 86 (1) ◽  
pp. 69-72 ◽  
Author(s):  
M. Kida ◽  
Y. Sakiyama ◽  
A. Matsuda ◽  
S. Takabayashi ◽  
H. Ochi ◽  
...  
Keyword(s):  
Novel Mutation ◽  
Dental Enamel ◽  
Fluorescence Analysis ◽  
Hereditary Disease ◽  
Amelogenesis Imperfecta ◽  
X Ray Diffraction ◽  
Japanese Family ◽  
X Ray ◽  
Amelogenin Gene

Amelogenesis imperfecta (AI) is a hereditary disease with abnormal dental enamel formation. Here we report a Japanese family with X-linked AI transmitted over at least four generations. Mutation analysis revealed a novel mutation (p.P52R) in exon 5 of the amelogenin gene. The mutation was detected as heterozygous in affected females and as hemizygous in their affected father. The affected sisters exhibited vertical ridges on the enamel surfaces, whereas the affected father had thin, smooth, yellowish enamel with distinct widening of inter-dental spaces. To study the pathological cause underlying the disease in this family, we synthesized the mutant amelogenin p.P52R protein and evaluated it in vitro. Furthermore, we studied differences in the chemical composition between normal and affected teeth by x-ray diffraction analysis and x-ray fluorescence analysis. We believe that these results will greatly aid our understanding of the pathogenesis of X-linked AI.

THE STUDY ON GRANTING BIOACTIVITY OF Ti ALLOY BY SURFACE TREATMENT

2010 ◽  
Vol 17 (02) ◽  
pp. 153-157 ◽  
Author(s):  
N. R. HA ◽  
Z. X. YANG ◽  
G. C. KIM ◽  
K. H. HWANG ◽  
D. S. SEO ◽  
...  
Keyword(s):  
Surface Treatment ◽  
Body Fluid ◽  
Surface Effect ◽  
In Vitro Test ◽  
Ti Alloy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Chemical Surface ◽  
Vitro Test

Titanium alloys are superior of biocompatibility, mechanical properties and chemical stability. The biocompatibility of Ti alloy is related to the surface effect between human tissue and implant. Therefore, the purpose of this study is to investigate the bioactivity of Ti alloy by alkali and acid chemical surface treatment; and the biocompatibility of Ti alloy was evaluated by in vitro test. Higher bone-bonding ability and bioactivity of the substrate were obtained by the formation of apatite layers on the Ti alloy in simulated body fluid. The microstructures of apatite layer were investigated by scanning electron microscope (SEM) and the formed phases were analyzed with X-ray diffraction (XRD).

Mesenchymal Stem Cell Response to Surface Altered Porous Ti

2015 ◽  
Vol 638 ◽  
pp. 67-72
Author(s):  
Ana Maria Salantiu ◽  
Florin Popa ◽  
Petru Pascuta ◽  
Olga Soritau ◽  
Noemi Dirzu ◽  
...  
Keyword(s):  
Stem Cell ◽  
X Ray Diffraction ◽  
X Ray ◽  
Chemically Modified ◽  
Porous Ti ◽  
Average Porosity ◽  
Ft Ir ◽  
Cell Testing ◽  
Scanning Electron

This work aims to investigate the influence of surface conditioning of porous Ti for enhancing its biological activity, as assessed by in vitro stem cell testing. Porous Ti samples with an average porosity of 32% were processed by Powder Metallurgy with dextrin as a space holder. The samples were subjected to H2O2 treatment to form an enhanced TiO2 film, followed by a heat treatment at 400°C and 600°C aiming to the crystallization of the as-formed amorphous titanium oxide. Samples characterization was performed by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FT-IR) and X-Ray Diffraction (XRD). The treated surfaces revealed to be made of both anatase and rutile TiO2, with groove–shaped structure and cracks on the surface of the TiO2 film. The intrinsic biocompatibility of the chemically modified porous Ti surfaces was assessed in vitro. In our cell culture tests, stem cells were found to attach and proliferate better on the chemically treated Ti surfaces compared to the control untreated Ti surfaces.

Potent Anticancer Activities of Beauvericin against KB cells In Vitro by Inhibiting the Expression of ACAT1 and Exploring Binding Affinity

2021 ◽  
Vol 21 ◽  
Author(s):  
Haiming Zhou ◽  
Jing Zhang ◽  
Xiaoqing Chen ◽  
Shili Guo ◽  
Huimei Lin ◽  
...  
Keyword(s):  
Molecular Docking ◽  
Cell Line ◽  
Binding Affinity ◽  
X Ray Diffraction ◽  
Kb Cells ◽  
Anticancer Activities ◽  
Monoclinic Crystal ◽  
X Ray ◽  
Multiple Tumor

Background and Objective: Beauvericin (BEA), a cyclic hexadepsipeptide mycotoxin, is a potent inhibitor of the acyl-CoA: cholesterol acyltransferase enzyme 1 (ACAT1) which involved in multiple tumor-correlated pathways. However, the binding mechanisms between BEA and ACAT1 were not elucidated. Methods: BEA was purified from a mangrove entophytic Fusarium sp. KL11. Single-crystal X-ray diffraction was used to determine the structure of BEA. Wound healing assays of BEA against KB cell line and MDA-MB-231 cell line were evaluated. Inhibitory potency of BEA against ACAT1 was determined by ELISA assays. Molecular docking was carried out to illuminate the bonding mechanism between BEA and ACAT1. Results: The structure of BEA was confirmed by X-ray diffraction, indicating a monoclinic crystal system with P21 space group (α = 90°, β = 92.2216(9)o, γ= 90o). BEA displayed migration-inhibitory activities against KB cells and MDA-MB-231 cells in vitro. ELISA assays revealed the protein expression level of ACAT1 in KB cells was significantly decreased after BEA treatment (P ＜0.05). Molecular docking demonstrated that BEA formed hydrogen bond with His425 and pi-pi staking with Tyr429 in ACAT1. Conclusions: BEA sufficiently inhibited the proliferation and migration of KB cells and MDA-MB-231 cells by downregulating ACAT1 expression. In addition, BEA potentially possessed a strong binding affinity with ACAT1. BEA may serve as a potential lead compound for the development of a new ACAT1-targeted anticancer drug.

Sign in / Sign up

Export Citation Format

Share Document