scholarly journals Mussel-Inspired Catechol Functionalisation as a Strategy to Enhance Biomaterial Adhesion: A Systematic Review

Polymers ◽  
2021 ◽  
Vol 13 (19) ◽  
pp. 3317
Author(s):  
Pedro M. Costa ◽  
David A. Learmonth ◽  
David B. Gomes ◽  
Mafalda P. Cautela ◽  
Ana C. N. Oliveira ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Physicochemical Properties ◽  
Selection Criteria ◽  
Biological Tissues ◽  
Clinical Use ◽  
Natural Polymers ◽  
Ample Evidence ◽  
Adhesion Properties ◽  
Poor Adhesion ◽  
Carbodiimide Coupling

Biomaterials have long been explored in regenerative medicine strategies for the repair or replacement of damaged organs and tissues, due to their biocompatibility, versatile physicochemical properties and tuneable mechanical cues capable of matching those of native tissues. However, poor adhesion under wet conditions (such as those found in tissues) has thus far limited their wider application. Indeed, despite its favourable physicochemical properties, facile gelation and biocompatibility, gellan gum (GG)-based hydrogels lack the tissue adhesiveness required for effective clinical use. Aiming at assessing whether substitution of GG by dopamine (DA) could be a suitable approach to overcome this problem, database searches were conducted on PubMed® and Embase® up to 2 March 2021, for studies using biomaterials covalently modified with a catechol-containing substituent conferring improved adhesion properties. In this regard, a total of 47 reports (out of 700 manuscripts, ~6.7%) were found to comply with the search/selection criteria, the majority of which (34/47, ~72%) were describing the modification of natural polymers, such as chitosan (11/47, ~23%) and hyaluronic acid (6/47, ~13%); conjugation of dopamine (as catechol “donor”) via carbodiimide coupling chemistry was also predominant. Importantly, modification with DA did not impact the biocompatibility and mechanical properties of the biomaterials and resulting hydrogels. Overall, there is ample evidence in the literature that the bioinspired substitution of polymers of natural and synthetic origin by DA or other catechol moieties greatly improves adhesion to biological tissues (and other inorganic surfaces).

scholarly journals Is Dialdehyde Chitosan a Good Substance to Modify Physicochemical Properties of Biopolymeric Materials?

2021 ◽  
Vol 22 (7) ◽  
pp. 3391
Author(s):  
Sylwia Grabska-Zielińska ◽  
Alina Sionkowska ◽  
Ewa Olewnik-Kruszkowska ◽  
Katarzyna Reczyńska ◽  
Elżbieta Pamuła
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Physicochemical Properties ◽  
Silk Fibroin ◽  
Three Dimensional ◽  
Microscopy Imaging ◽  
Maximum Deformation ◽  
One Step ◽  
Chitosan Blends ◽  
Fourier Transfer Infrared Spectroscopy

The aim of this work was to compare physicochemical properties of three dimensional scaffolds based on silk fibroin, collagen and chitosan blends, cross-linked with dialdehyde starch (DAS) and dialdehyde chitosan (DAC). DAS was commercially available, while DAC was obtained by one-step synthesis. Structure and physicochemical properties of the materials were characterized using Fourier transfer infrared spectroscopy with attenuated total reflectance device (FTIR-ATR), swelling behavior and water content measurements, porosity and density observations, scanning electron microscopy imaging (SEM), mechanical properties evaluation and thermogravimetric analysis. Metabolic activity with AlamarBlue assay and live/dead fluorescence staining were performed to evaluate the cytocompatibility of the obtained materials with MG-63 osteoblast-like cells. The results showed that the properties of the scaffolds based on silk fibroin, collagen and chitosan can be modified by chemical cross-linking with DAS and DAC. It was found that DAS and DAC have different influence on the properties of biopolymeric scaffolds. Materials cross-linked with DAS were characterized by higher swelling ability (~4000% for DAS cross-linked materials; ~2500% for DAC cross-linked materials), they had lower density (Coll/CTS/30SF scaffold cross-linked with DAS: 21.8 ± 2.4 g/cm3; cross-linked with DAC: 14.6 ± 0.7 g/cm3) and lower mechanical properties (maximum deformation for DAC cross-linked scaffolds was about 69%; for DAS cross-linked scaffolds it was in the range of 12.67 ± 1.51% and 19.83 ± 1.30%) in comparison to materials cross-linked with DAC. Additionally, scaffolds cross-linked with DAS exhibited higher biocompatibility than those cross-linked with DAC. However, the obtained results showed that both types of scaffolds can provide the support required in regenerative medicine and tissue engineering. The scaffolds presented in the present work can be potentially used in bone tissue engineering to facilitate healing of small bone defects.

Feasible strategies to promote the sensing performances of spinel MCo2O4 (M = Ni, Fe, Mn, Cu and Zn) based electrochemical sensors: A review

2021 ◽  
Author(s):  
Josué M. Gonçalves ◽  
Diego Pessoa Rocha ◽  
Murillo N.T. Silva ◽  
Paulo Roberto Martins ◽  
Edson Nossol ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Physicochemical Properties ◽  
Electrochemical Sensors ◽  
Combined Effects ◽  
Cu And Zn

Spinel MCo2O4 (M = Ni, Fe, Mn, Cu and Zn) demonstrates excellent physicochemical properties due to combined effects of M2+ and Co2+ cations. Their inimitable optical, electronic, and mechanical properties...

scholarly journals Protein Hydrogels: The Swiss Army Knife for Enhanced Mechanical and Bioactive Properties of Biomaterials

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1656
Author(s):  
Carla Huerta-López ◽  
Jorge Alegre-Cebollada
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Polymer Networks ◽  
Biological Tissues ◽  
Modern Medicine ◽  
Body Parts ◽  
Biomedical Sciences ◽  
Protein Hydrogels ◽  
Large Water ◽  
Design Options

Biomaterials are dynamic tools with many applications: from the primitive use of bone and wood in the replacement of lost limbs and body parts, to the refined involvement of smart and responsive biomaterials in modern medicine and biomedical sciences. Hydrogels constitute a subtype of biomaterials built from water-swollen polymer networks. Their large water content and soft mechanical properties are highly similar to most biological tissues, making them ideal for tissue engineering and biomedical applications. The mechanical properties of hydrogels and their modulation have attracted a lot of attention from the field of mechanobiology. Protein-based hydrogels are becoming increasingly attractive due to their endless design options and array of functionalities, as well as their responsiveness to stimuli. Furthermore, just like the extracellular matrix, they are inherently viscoelastic in part due to mechanical unfolding/refolding transitions of folded protein domains. This review summarizes different natural and engineered protein hydrogels focusing on different strategies followed to modulate their mechanical properties. Applications of mechanically tunable protein-based hydrogels in drug delivery, tissue engineering and mechanobiology are discussed.

scholarly journals Concomitant control of mechanical properties and degradation in resorbable elastomer-like materials using stereochemistry and stoichiometry for soft tissue engineering

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Mary Beth Wandel ◽  
Craig A. Bell ◽  
Jiayi Yu ◽  
Maria C. Arno ◽  
Nathan Z. Dreger ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Drug Delivery ◽  
Soft Tissue ◽  
Tissue Regeneration ◽  
Biological Tissues ◽  
Soft Tissue Regeneration ◽  
Soft Tissue Engineering ◽  
Degradation Properties ◽  
Enhance Cell Adhesion

AbstractComplex biological tissues are highly viscoelastic and dynamic. Efforts to repair or replace cartilage, tendon, muscle, and vasculature using materials that facilitate repair and regeneration have been ongoing for decades. However, materials that possess the mechanical, chemical, and resorption characteristics necessary to recapitulate these tissues have been difficult to mimic using synthetic resorbable biomaterials. Herein, we report a series of resorbable elastomer-like materials that are compositionally identical and possess varying ratios of cis:trans double bonds in the backbone. These features afford concomitant control over the mechanical and surface eroding degradation properties of these materials. We show the materials can be functionalized post-polymerization with bioactive species and enhance cell adhesion. Furthermore, an in vivo rat model demonstrates that degradation and resorption are dependent on succinate stoichiometry in the elastomers and the results show limited inflammation highlighting their potential for use in soft tissue regeneration and drug delivery.

scholarly journals Enhancing the mechanical properties and cytocompatibility of magnesium potassium phosphate cement by incorporating oxygen-carboxymethyl chitosan

2020 ◽  
Author(s):  
Changtian Gong ◽  
Shuo Fang ◽  
Kezhou Xia ◽  
Jingteng Chen ◽  
Liangyu Guo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Physicochemical Properties ◽  
Bone Cement ◽  
Ph Value ◽  
Setting Time ◽  
Potassium Phosphate ◽  
Carboxymethyl Chitosan ◽  
Bioactive Substances ◽  
Magnesium Potassium Phosphate Cement

Abstract Incorporating bioactive substances into synthetic bioceramic scaffolds is challenging. In this work, oxygen-carboxymethyl chitosan (O-CMC), a natural biopolymer that is nontoxic, biodegradable and biocompatible, was introduced into magnesium potassium phosphate cement (K-struvite) to enhance its mechanical properties and cytocompatibility. This study aimed to develop O-CMC/magnesium potassium phosphate composite bone cement (OMPC), thereby combining the optimum bioactivity of O-CMC with the extraordinary self-setting properties and mechanical intensity of the K-struvite. Our results indicated that O-CMC incorporation increased the compressive strength and setting time of K-struvite and decreased its porosity and pH value. Furthermore, OMPC scaffolds remarkably improved the proliferation, adhesion and osteogenesis related differentiation of MC3T3-E1 cells. Therefore, O-CMC introduced suitable physicochemical properties to K-struvite and enhanced its cytocompatibility for use in bone regeneration.

A Review of Water-Resistant Cellulose-Based Materials in Pharmaceutical and Biomedical Application

2021 ◽  
Vol 28 ◽  
Author(s):  
Bei He ◽  
Xinxin Liu ◽  
Shi Qi ◽  
Run Zheng ◽  
Minmin Chang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Biomedical Application ◽  
Drug Loading ◽  
Cellulose Fibers ◽  
Dip Coating ◽  
Wound Dressings ◽  
Attractive Alternative ◽  
Natural Polymers ◽  
Insoluble Drugs ◽  
Good Biocompatibility

Background: Cellulose, huge reserves of natural polymers, have been widely applied in pharmaceutical and biomedicine fields due to its good biocompatibility, biodegradability, non-toxicity and excellent mechanical properties. At present, water-resistant metal-based and petroleum-based materials applied in medical field exists obvious problems of poor biocompatibility and high cost. Therefore, water-resistant cellulose-based materials with good biocompatibility and low price will become an attractive alternative. This review aims to summarize the preparation of water-resistant cellulose-based materials and their potential application in pharmaceutical and biomedical in recent years. Methods: Common hydrophobic treatments of cellulose fibers or paper were overviewed. The preparation, properties and applications of water-resistant cellulose-based materials in the pharmaceutical and biomedical fields were summarized. Results: Common hydrophobic treatments of cellulose fibers or paper were divided into chemical modification (graft polymerization, crosslinking, solution casting or dip-coating), physico-chemical surface modifications (plasma treatments, surface patterning, electrostatic spraying and electrowetting) and physical processing (electrostatic spinning, SAS process and 3D EHD printing). These hydrophobically processed cellulose fibers or paper could be prepared into various water-resistant cellulose-based materials and applied in pharmaceutical excipients, drug-loaded amphiphilic micelles, drug-loaded composite fibers, hydrophobic biocomposite film/coatings and paper-based detectors. They presented excellent water resistance and biocompatibility, low cytotoxicity and high drug loading ability, and stable drug release rate, etc., which could be used for water-insoluble drugs carriers, wound dressings, and medical testing equipment. Conclusion: Currently, water-resistant cellulose-based materials were mainly applied in water-insoluble drugs delivery carriers, wound dressing and medical diagnosis and presented great application prospects. However, the contradiction between hydrophobicity and mechanical properties of these reported water-resistant cellulose-based materials limited their wider application in biomedicine such as tissue engineering. In the future, attention will be focused on the higher hydrophobicity of water-resistant cellulose-based materials with excellent mechanical properties. In addition, clinical medical research of water-resistant cellulose-based materials should be strengthened.

Modeling the Large Deformation and Microstructure Evolution of Nonwoven Polymer Fiber Networks

2018 ◽  
Vol 86 (1) ◽  
Author(s):  
Mang Zhang ◽  
Yuli Chen ◽  
Fu-pen Chiang ◽  
Pelagia Irene Gouma ◽  
Lifeng Wang
Keyword(s):  
Mechanical Properties ◽  
Aspect Ratio ◽  
Mechanical Behavior ◽  
Large Deformation ◽  
Biological Tissues ◽  
High Porosity ◽  
Polymer Fiber ◽  
Fiber Networks ◽  
Fiber Aspect Ratio ◽  
Network Microstructure

The electrospinning process enables the fabrication of randomly distributed nonwoven polymer fiber networks with high surface area and high porosity, making them ideal candidates for multifunctional materials. The mechanics of nonwoven networks has been well established for elastic deformations. However, the mechanical properties of the polymer fibrous networks with large deformation are largely unexplored, while understanding their elastic and plastic mechanical properties at different fiber volume fractions, fiber aspect ratio, and constituent material properties is essential in the design of various polymer fibrous networks. In this paper, a representative volume element (RVE) based finite element model with long fibers is developed to emulate the randomly distributed nonwoven fibrous network microstructure, enabling us to systematically investigate the mechanics and large deformation behavior of random nonwoven networks. The results show that the network volume fraction, the fiber aspect ratio, and the fiber curliness have significant influences on the effective stiffness, effective yield strength, and the postyield behavior of the resulting fiber mats under both tension and shear loads. This study reveals the relation between the macroscopic mechanical behavior and the local randomly distributed network microstructure deformation mechanism of the nonwoven fiber network. The model presented here can also be applied to capture the mechanical behavior of other complex nonwoven network systems, like carbon nanotube networks, biological tissues, and artificial engineering networks.

Selection Criteria for the Clinical Use of the Newer Antiepileptic Drugs

CNS Drugs ◽  
2003 ◽  
Vol 17 (6) ◽  
pp. 405-421 ◽  
Author(s):  
Charles L P Deckers ◽  
P D Knoester ◽  
G J de Haan ◽  
A Keyser ◽  
W O Renier ◽  
...  
Keyword(s):  
Antiepileptic Drugs ◽  
Selection Criteria ◽  
Clinical Use

The Influence of Factors of a Biological and Physical Nature on the Biodegradation and Physicochemical Properties of Composites Based on Polyvinyl Chloride and Natural Polymers

2018 ◽  
Vol 45 (6) ◽  
pp. 283-288
Author(s):  
V.F. Smirnov ◽  
A.A. Glagoleva ◽  
A.E. Mochalova ◽  
L.A. Smirnova ◽  
N.A. Anikina
Keyword(s):  
Physicochemical Properties ◽  
Polyvinyl Chloride ◽  
Polymeric Material ◽  
Starch Content ◽  
Physical Nature ◽  
Physical Factors ◽  
Microscopic Fungi ◽  
Natural Polymers ◽  
Properties Of Composites

It has been established that the degree of biodegradation of composites based on polyvinyl chloride and natural polymers by microscopic fungi changes as a function of the chitosan and starch content in the composites. Biodegradation of polymeric material is accompanied with change in its physicochemical properties. A number of physical factors result in an increase in the degree of biodegradation of the materials investigated.

Sign in / Sign up

Export Citation Format

Share Document