PROVISION OF SOIL TREATMENT TECHNOLOGIES WITH INTELLIGENT TOOLS AND CONTROL METHODS

2020 ◽  
Keyword(s):  
New Technologies ◽  
Economic Assessment ◽  
Energy Assessment ◽  
Industry Standards ◽  
Treatment Technologies ◽  
Environmental Requirements ◽  
Intelligent Tools ◽  
Almost All ◽  
Favorable Conditions ◽  
And Control

Increasing productivity in agriculture is unthinkable without the use of digital technologies based on the Internet and advanced technologies. Analysis of agrotechnical and environmental requirements for various technologies of tillage, both traditional and promising means of mechanization, shows that the timely registration, preservation and transmission of this data to the head computer requires using the most modern instruments and equipment. Devices designed for testing and operation of tillage machines and software for calculating operational and technological indicators, currently produced in small batches, meet the tasks set for them, meet the current domestic industry standards, but their high cost and narrow specialization limits their use . The use of devices is carried out during the tests of tillage equipment during technical expertise, agrotechnical and operational - technological types of assessments, during energy assessment, reliability assessment, safety and economic assessment of the structure, the use of universal controls, also used in testing almost all agricultural machinery and tractors. Similar equipment of foreign production requires knowledge of a foreign language, necessary experience with foreign computing equipment and software. Creating favorable conditions for growing crops during the entire growing season, observing all the necessary tillage techniques, including tools with elements of digital control and regulation, taking into account the physical properties of the soil, its debris, mechanical composition and erosion, predecessors and features of new technologies of cultivation, will allow to achieve high results without additional investment.

Auto Markets in the World and Strategy of Japan’s Companies

2019 ◽  
Vol 10 (10) ◽  
pp. 1003-1008
Author(s):  
Hiroyuki Matsuoka ◽  
Keyword(s):  
Saudi Arabia ◽  
Electric Vehicle ◽  
New Technologies ◽  
Auto Industry ◽  
Domestic Market ◽  
Automatic Driving ◽  
The World ◽  
Almost All ◽  
Made In

In the world auto market, top three companies are VW(Volkswagen), Runault-Nissan-Mistubishi, and Toyota. About some selected countries and areas, China, England, Italy, Australia, Germany, Turkey, Russia, Sweden, USA, Brazil, UAE, Japan, Vietnam and Thailand are more competitive. However, the situation is different. Seeing monopolistic market countries and areas, Saudi Arabia, Taiwan, Korea, Malaysia, France, India, and Pakistan, in particular, the influence of Japan to Taiwan, India, and Pakistan is very big. But in Korea and France, their own companies’ brands occupy the market. In Japan domestic market, the overall situation is competitive. Almost all vehicles made in Japan are Japanese brand. From now on, we have to note the development of electric vehicle (EV) and other new technologies such as automatic driving and connected car. That is because they will give a great impact on the auto industry and market of Japan. Now Japan’s auto industry is going to be consolidated into three groups, Honda, Toyota group, and Renault-Nissan-Mitsubishi group for seeking the scale merit of economy. Therefore, I will pay attention to the worldwide development of EV and other new technologies and the reorganization of auto companies groups.

Changes in the Population Density of Pathogenic Microorganisms in Response to the Allelopathic Effect of Thypha Latifolia

2014 ◽  
Vol 1 (1) ◽  
pp. 31-36 ◽  
Author(s):  
O. Zhukorskiy ◽  
O. Gulay ◽  
V. Gulay ◽  
N. Tkachuk
Keyword(s):  
Cell Density ◽  
Allelopathic Effect ◽  
Pathogenic Microorganisms ◽  
Sterile Water ◽  
Erysipelothrix Rhusiopathiae ◽  
Pathogenic Leptospira ◽  
Favorable Conditions ◽  
And Control ◽  
The Impact ◽  
Control Samples

Aim. To determine the response of the populations of Erysipelothrix rhusiopathiae and Leptospira interrogans pathogenic microorganisms to the impact of broadleaf cattail (Thypha latifolia) root diffusates. Methods. Aqueous solutions of T. latifolia root diffusates were sterilized by vacuum fi ltration through the fi lters with 0.2-micron pore diameter. The experimental samples contained cattail secretions, sterile water, and cultures of E. rhusiopathiae or L. interrogans. The same amount of sterile water, as in the experimental samples, was used for the purpose of control, and the same quantity of microbial cultures was added in it. After exposure, the density of cells in the experimental and control samples was determined. Results. Root diffusates of T. latifolia caused an increase in cell density in the populations of E. rhusiopathiae throughout the whole range of the studied dilutions (1:10–1:10000). In the populations of the 6 studied serological variants of L. interrogans spirochetes (pomona, grippotyphosa, copenhageni, kabura, tarassovi, canicola), the action of broadleaf cattail root diffusates caused the decrease in cell density. A stimulatory effect was marked in the experimental samples of the pollonica serological variant of leptospira. Conclusions. The populations of E. rhusiopathiae and L. interrogans pathogenic microorganisms respond to the allelopathic effect of Thypha latifolia by changing the cell density. The obtained results provide the background to assume that broadleaf cattail thickets create favorable conditions for the existence of E. rhusiopathiae pathogen bacteria. The reduced cell density of L. interrogans in the experimental samples compared to the control samples observed under the infl uence of T. latifolia root diffusates suggests that reservoirs with broadleaf cattail thickets are marked by the unfavorable conditions for the existence of pathogenic leptospira (except L. pollonica).

Convergence in norming and control of modern wireless technologies electromagnetic fields

2020 ◽  
Vol 60 (9) ◽  
pp. 610-613
Author(s):  
Michail Yu. Maslov ◽  
Yuri M. Spodobaev
Keyword(s):  
Wireless Communication ◽  
Electromagnetic Fields ◽  
Communication Systems ◽  
Communication Technologies ◽  
Telecommunications Industry ◽  
High Tech ◽  
Wireless Technologies ◽  
Almost All ◽  
Network Technologies ◽  
And Control

Telecommunications industry evolution shows the highest rates of transition to high-tech systems and is accompanied by a trend of deep mutual penetration of technologies - convergence. The dominant telecommunication technologies have become wireless communication systems. The widespread use of modern wireless technologies has led to the saturation of the environment with technological electromagnetic fields and the actualization of the problems of protecting the population from them. This fundamental restructuring has led to a uniform dense placement of radiating fragments of network technologies in the mudflow areas. The changed parameters of the emitted fields became the reason for the revision of the regulatory and methodological support of electromagnetic safety. A fragmented structural, functional and parametric analysis of the problem of protecting the population from the technological fields of network technologies revealed uncertainty in the interpretation of real situations, vulnerability, weakness and groundlessness of the methodological basis of sanitary-hygienic approaches. It is shown that this applies to all stages of the electromagnetic examination of the emitting fragments of network technologies. Distrust arises on the part of specialists and the population in not only the system of sanitary-hygienic control, but also the safety of modern network technologies is being called into question. Growing social tensions and radio phobia are everywhere accompanying the development of wireless communication technologies. The basis for solving almost all problems of protecting the population can be the transfer of subjective methods and means of monitoring and sanitary-hygienic control of electromagnetic fields into the field of IT.

U.S. Regulatory Approaches: A Critical Appraisal

1992 ◽  
Vol 25 (3) ◽  
pp. 13-21
Author(s):  
R. L. Williamson
Keyword(s):  
Decision Making ◽  
Command And Control ◽  
Regulatory System ◽  
Federal Agencies ◽  
Toxic Substances ◽  
Use Of Technology ◽  
Treatment Technologies ◽  
New Treatment ◽  
And Control ◽  
The Impact

The American approach to environmental regulation is characterized by fragmentation of responsibilities, primary reliance on command and control regulations, extraordinary complexity, a preference for identifiable standards, and heavy resort to litigation. This system has provided important benefits, including significant reduction of environmental contamination, substantial use of science in decision-making, broad participatory rights, and the stimulation of new treatment technologies. However, these gains have been achieved at excessive cost. Too much reliance is placed on command and control methods and especially on technology-based standards. There is too much resort to litigation, and inadequate input from science. Participatory rights are being undermined, and there is a poor allocation of decision-making among the federal agencies and the states. Over-regulation sometimes leads to under-regulation, and insufficient attention is given to the impact on small entities. The responsibility for these difficulties rests with everyone, including the federal agencies, the Congress, the general public and the courts. Changes in the regulatory system are needed. We should abandon the use of technology-based standards to control toxic substances under the Clean Water Act in favor of strong health- and environmentally based standards, coupled with taxes on toxic substances in wastewater.

Automated reverse engineering control system model

2020 ◽  
pp. 39-43
Author(s):  
A. V. Vinnichenko ◽  
S. A. Nazarevich ◽  
I. R. Karpova
Keyword(s):  
Control System ◽  
Reverse Engineering ◽  
Flaw Detection ◽  
Production Capacity ◽  
Speed Up ◽  
Environmental Requirements ◽  
Traditional Technologies ◽  
The Moment ◽  
Control System Model ◽  
Favorable Conditions

The article deals with the task of simplifying the reverse design process by implementing three-point 3D scanning, which allows you to speed up the technological stages of reverse design to the moment of product manufacture, as well as simplify the procedure for defecating finished products and create favorable conditions for the implementation of the principles of unification. The model of the control system in this article refers to the structuring of elements of the technological organization of the process of creating 3D prototyping of existing copies created by the use of reverse engineering. For this purpose, the problems of traditional technologies that do not allow timely coping with changes in the technical system under the influence of in accordance with the requirements of regulatory documents and environmental requirements were considered. We also analyzed not only the principles of operation of traditional technologies, but also the zone of reverse engineering, which allows you to achieve an increased level of production capacity by identifying a group of key defects based on the process of flaw detection and statistical analysis.

Drug policy and control at the international level

2018 ◽  
Author(s):  
Thomas F. Babor ◽  
Jonathan Caulkins ◽  
Benedikt Fischer ◽  
David Foxcroft ◽  
Keith Humphreys ◽  
...  
Keyword(s):  
Low Income ◽  
Low Income Countries ◽  
Drug Control ◽  
Prescription Medications ◽  
Access To Treatment ◽  
Illicit Markets ◽  
Pain Medications ◽  
Almost All ◽  
And Control ◽  
Illicit Trafficking

International drug control efforts are designed to coordinate domestic laws with international activities that regulate or limit the supply of psychoactive substances. These efforts are organized around three main drug control treaties that almost all countries have ratified in order to prevent illicit trafficking and other drug-related crime, while at the same time allowing access to prescription medications. The effects of the system have been evaluated mostly in terms of the ability to eliminate illicit markets and supply. The gross imbalance in world consumption of legal opiates is a pointer to the limited availability of effective pain medications in many low-income countries, with 80% of the world’s population having either no or inadequate access to treatment for moderate or severe pain.

scholarly journals Membrane condenser as emerging technology for water recovery and gas pre-treatment: current status and perspectives

2019 ◽  
Vol 1 (1) ◽  
Author(s):  
Adele Brunetti ◽  
Francesca Macedonio ◽  
Giuseppe Barbieri ◽  
Enrico Drioli
Keyword(s):  
Current Status ◽  
Innovative Technology ◽  
Water Recovery ◽  
Treatment Unit ◽  
Treatment Stage ◽  
Treatment Technologies ◽  
Pre Treatment ◽  
And Control

Abstract The recent roadmap of SPIRE initiative includes the development of “new separation, extraction and pre-treatment technologies” as one of the “key actions” for boosting sustainability, enhancing the availability and quality of existing resources. Membrane condenser is an innovative technology that was recently investigated for the recovery of water vapor for waste gaseous streams, such as flue gas, biogas, cooling tower plumes, etc. Recently, it has been also proposed as pre-treatment unit for the reduction and control of contaminants in waste gaseous streams (SOx and NOx, VOCs, H2S, NH3, siloxanes, halides, particulates, organic pollutants). This perspective article reports recent progresses in the applications of the membrane condenser in the treatment of various gaseous streams for water recovery and contaminant control. After an overview of the operating principle, the membranes used, and the main results achieved, the work also proposes the role of this technology as pre-treatment stage to other separation technologies. The potentialities of the technology are also discussed aspiring to pave the way towards the development of an innovative technology where membrane condenser can cover a key role in redesigning the whole upgrading process.

scholarly journals Effect of Integrated Neuromuscular Exercise in Physical Education Class on Health-Related Fitness in Female Children

Healthcare ◽  
2021 ◽  
Vol 9 (3) ◽  
pp. 312
Author(s):  
Marijana Sinđić ◽  
Draženka Mačak ◽  
Nikola Todorović ◽  
Bianka Purda ◽  
Maja Batez
Keyword(s):  
Physical Education ◽  
Muscular Fitness ◽  
Female Children ◽  
Before And After ◽  
Health Related ◽  
The Republic ◽  
Almost All ◽  
And Control ◽  
Cardiorespiratory Endurance ◽  
Health Related Fitness

Integrated neuromuscular training (INT) showed benefits for improving fundamental movement skills (FMS). However, the INT health-related fitness (HRF) effects are lacking. The current study aimed to determine the effects of INT implemented during physical education (PE) in a primary school in the Republic of Serbia on HRF in female children. The sample consisted of 72 healthy girls who were divided into the intervention (EG: n = 37; mean ± SD: age = 8.17 ± 0.31) and control (CG: n = 35; age = 8.11 ± 0.31) groups. The EG and CG performed the INT program and traditional PE activities two times per week within the first ~15 min of PE class, respectively. The Fitnessgram battery tests assessed the HRF (body composition, cardiorespiratory endurance, muscular fitness, and flexibility) before and after the program. After eight weeks, the EG significantly reduced all fat measures, while the CG decreased only triceps skinfold but to a smaller extent (F = 5.92, p < 0.02, ŋ2 = 0.09). Both groups significantly improved the performance of almost all muscular fitness tests (curl-ups, trunk lift, push-ups); however, the EG increased the push-ups more than the CG (F = 9.01, p < 0.01, ŋ2 = 0.14). The EG additionally improved the modified pull-ups (F = 14.09, p < 0.01, ŋ2 = 0.19) and flexed arm hang (F = 28.82, p < 0.01, ŋ2 = 0.33) tests. The flexibility and cardiorespiratory endurance of both groups did not significantly change after eight weeks. This approach of exercise showed positive acceptance and relatively good results after only eight weeks.

scholarly journals Phony peach disease: past and present impact on the peach industry in the southeastern U.S.A

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Kendall A. Johnson ◽  
Clive H. Bock ◽  
Phillip M. Brannen
Keyword(s):  
New Technologies ◽  
Current Knowledge ◽  
Future Research ◽  
Management Options ◽  
Disease Epidemiology ◽  
Pathogen Diversity ◽  
Foundational Research ◽  
Global Threat ◽  
And Control ◽  
The Impact

Abstract Background Phony peach disease (PPD) is caused by the plant pathogenic bacterium Xylella fastidiosa subsp. multiplex (Xfm). Historically, the disease has caused severe yield loss in Georgia and elsewhere in the southeastern United States, with millions of PPD trees being removed from peach orchards over the last century. The disease remains a production constraint, and management options are few. Limited research has been conducted on PPD since the 1980s, but the advent of new technologies offers the opportunity for new, foundational research to form a basis for informed management of PPD in the U.S. Furthermore, considering the global threat of Xylella to many plant species, preventing import of Xfm to other regions, particularly where peach is grown, should be considered an important phytosanitary endeavor. Main topics We review PPD, its history and impact on peach production, and the eradication efforts that were conducted for 42 years. Additionally, we review the current knowledge of the pathogen, Xfm, and how that knowledge relates to our understanding of the peach—Xylella pathosystem, including the epidemiology of the disease and consideration of the vectors. Methods used to detect the pathogen in peach are discussed, and ramifications of detection in relation to management and control of PPD are considered. Control options for PPD are limited. Our current knowledge of the pathogen diversity and disease epidemiology are described, and based on this, some potential areas for future research are also considered. Conclusion There is a lack of recent foundational research on PPD and the associated strain of Xfm. More research is needed to reduce the impact of this pathogen on peach production in the southeastern U.S., and, should it spread internationally, wherever peaches are grown.

scholarly journals Is There a Predisposition towards the Use of New Technologies within the Traffic Field of Emerging Countries? The Case of the Dominican Republic

Electronics ◽  
2021 ◽  
Vol 10 (10) ◽  
pp. 1208
Author(s):  
Francisco Alonso ◽  
Mireia Faus ◽  
Cristina Esteban ◽  
Sergio A. Useche
Keyword(s):  
Dominican Republic ◽  
Road Safety ◽  
New Technologies ◽  
Technological Development ◽  
Personal Data ◽  
Emerging Countries ◽  
Level Of Knowledge ◽  
One Year ◽  
The One ◽  
And Control

Technological devices are becoming more and more integrated in the management and control of traffic in big cities. The population perceives the benefits provided by these systems, and, therefore, citizens usually have a favorable opinion of them. However, emerging countries, which have fewer available infrastructures, could present a certain lack of trust. The objective of this work is to detect the level of knowledge and predisposition towards the use of new technologies in the transportation field of the Dominican Republic. For this study, the National Survey on Mobility was administered to a sample of Dominican citizens, proportional to the ONE census and to sex, age and province. The knowledge of ITS topics, as well as the use of mobile applications for mobility, are scarce; however, there was a significant increase that can be observed in only one year. Moreover, technology is, in general, positively assessed for what concerns the improvement of the traffic field, even though there is a lack of predisposition to provide one’s personal data, which is necessary for these devices. The process of technological development in the country must be backed up by laws that protect the citizens’ privacy. Thus, technologies that can improve road safety, mobility and sustainability can be implemented in the country.

Sign in / Sign up

Export Citation Format

Share Document