Effects of different size of fly ash as cement replacement on self-compacting concrete properties

2019 ◽  
Vol 1 (2) ◽  
pp. 180-186
Author(s):  
Dilan Rantung ◽  
Steve W.M. Supit ◽  
Seska Nicolaas
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Fly Ash ◽  
Building Construction ◽  
Particle Sizes ◽  
Self Compacting Concrete ◽  
Cement Replacement ◽  
Concrete Mixtures ◽  
Water Curing ◽  
Passing Ability

This paper aims to investigate experimentally the influence of replacing cement with different fineness of fly ash based on flowability, passing ability, compressive strength, tensile strength (splitting). Concretes with 15% fly ash (passed a number 100 sieve) and fine fly ash (passed a number 200 sieve) as cement replacement were cast and tested at 7, 14, 28 days after water curing. A superplasticizer in the form of viscocrete 3115 N was constantly used for each concrete mixtures as much as 1% by weight of cement. The results show that the use of fly ash does not significantly increased the compressive strength and tensile strength of SCC mixtures. However, concrete with 15% fine fly ash its self and combined 7.5% fly ash with 7.5% fine fly ash show better flowability and passing ability when compared to concrete with cement only indicating the performance of using smaller particle sizes of fly ash could lead better properties of SCC that can be potentially used for building construction application.

scholarly journals Performance of sustainable self-compacting fiber reinforced concrete with substitution of marble waste (MW) and coconut fibers (CFs)

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jawad Ahmad ◽  
Fahid Aslam ◽  
Rebeca Martinez-Garcia ◽  
Mohamed Hechmi El Ouni ◽  
Khalid Mohamed Khedher
Keyword(s):  
Experimental Investigation ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
High Strength ◽  
Fiber Reinforced Concrete ◽  
Self Compacting Concrete ◽  
Pozzolanic Materials ◽  
Passing Ability ◽  
Marble Waste

AbstractSelf compacting concrete (SCC) is special type of concrete which is highly flowable and non-segregated and by its own mass, spreads into the formwork without any external vibrators, even in the presence of thick reinforcement. But SSC is also brittle nature like conventional concrete, which results in abrupt failure without giving any deformation (warning), which is undesirable for any structural member. Thus, self-compacting concrete (SCC) needs some of tensile reinforcement to enhance tensile strength and prevent the unsuitable abrupt failure. But fiber increased tensile strength of concrete more effectively than compressive strength. Hence, it is essential to add pozzolanic materials into fiber reinforced concrete to achieve high strength, durable and ductile concrete. This study is conducted to assess the performance of SCC with substitutions of marble waste (MW) and coconut fiber (CFs) into SCC. MW utilized as cementitious (pozzolanic) materials in percentage of 5.0 to 30% in increment of 5.0% by weight of binder and concrete is reinforced with CFs in proportion of 0.5 to 3.0% in increment of 0.5% by weight of binder. Rheological characteristics were measured through its filling and passing ability by using Slump flow, Slump T50, L-Box, and V-funnel tests while mechanical characteristics were measured through compressive strength, split tensile strength, flexure strength and bond strength (pull out) tests. Experimental investigation show that MW and CFs decrease the passing ability and filling ability of SCC. Additionally, Experimental investigation show that MW up to 20% and CFs addition 2.0% by weight of binder tend to increase the mechanical performance of SCC. Furthermore, statistical analysis (RSM) was used to optimize the combined dose of MW and CFs into SCC to obtain high strength self-compacting concrete.

Effect of Fly Ash on Compressive Strength and Porosity of Self-Compacting Concrete

2015 ◽  
Vol 754-755 ◽  
pp. 447-451 ◽  
Author(s):  
Sunarmasto ◽  
Stefanus Adi Kristiawan
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Replacement Level ◽  
Self Compacting Concrete ◽  
Cement Replacement ◽  
Vacuum Saturation ◽  
Saturation Method ◽  
Hardened Properties

Self-compacting concrete has been produced incorporating fly ash as cement replacement. The hardened properties of this concrete in term of compressive strength and porosity are investigated. The main goal of this investigation is to observe the effect of fly ash on those properties. The range of fly ash replacement level is 50%-70% by weight of the total binder. The compressive strength self-compacting concrete is reduced when fly ash replacement level is increased. The decrease in strength is more distinctive at 28 days of age compared to that of earlier or later age. Porosity as measured by vacuum saturation method tends to increase as fly ash replacement level is increased. A good correlation exists between porosity and compressive strength.

scholarly journals The Effect of Fine and Coarse Recycled Aggregates on Fresh and Mechanical Properties of Self-Compacting Concrete

Materials ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1120 ◽  
Author(s):  
Mahmoud Nili ◽  
Hossein Sasanipour ◽  
Farhad Aslani
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Energy Absorption ◽  
Silica Fume ◽  
The Self ◽  
Recycled Aggregates ◽  
Self Compacting Concrete ◽  
Concrete Mixtures ◽  
Natural Aggregates ◽  
Recycled Material

Today, the use of recycled aggregates as a substitute for a part of the natural aggregates in concrete production is increasing. This approach is essential because the resources for natural aggregates are decreasing in the world. In the present study, the effects of recycled concrete aggregates as a partial replacement for fine (by 50%) and coarse aggregates (by 100%) were examined in the self-compacting concrete mixtures which contain air-entraining agents and silica fumes. Two series of self-compacting concrete mixes have been prepared. In the first series, fine and coarse recycled mixtures respectively with 50% and 100% replacement with air entraining agent were used. In the second series, fine recycled (with 50% replacement) and coarse recycled (with 100% replacement) were used with silica fume. The rheological properties of the self-compacting concrete (SCC) were determined using slump-flow and J-ring tests. The tests of compressive strength, tensile strength, and compressive stress-strain behavior were performed on both series. The results indicated that air-entraining agent and silica fume have an important role in stabilization of fresh properties of the mixtures. The results of tests indicated a decrease in compressive strength, modulus of elasticity, and energy absorption of concrete mixtures containing air entrained agent. Also, the results showed that complete replacement (100%) with coarse recycled material had no significant effect on mechanical strength, while replacement with 50% fine recycled material has reduced compressive strength, tensile strength, and energy absorption.

scholarly journals Early strength of various fly ash based concrete in peat environment

2019 ◽  
Vol 276 ◽  
pp. 01022 ◽  
Author(s):  
Monita Olivia ◽  
Gunawan Wibisono ◽  
Edy Saputra
Keyword(s):  
Tensile Strength ◽  
Fly Ash ◽  
High Volume ◽  
Organic Content ◽  
Target Strength ◽  
Acid Attack ◽  
Cement Replacement ◽  
Concrete Mixtures ◽  
High Volume Fly Ash ◽  
Early Strength

Fly ash is a by-product of coal combustion in a power station and usually used as additive or cement replacement material to improve properties of concrete in aggressive environments such as acid, chloride, and sulphate. Peatland is one of acidic environment that is common in Riau province with high organic content and low pH that is damaging for concrete, especially when exposed to concrete at an early age. This paper aims to study the early compressive and tensile strength of the various type of fly ash based concrete subjected to peat water. Seven fly ash-based concrete mixtures investigate were, i.e., geopolymer hybrid using 15% of Ordinary Portland Cement (OPC) as an additive, high volume fly ash using 25%, 50% and 75% of fly ash as cement replacement material, and blended OPC with fly ash with different grade of 15, 21 and 29 MPa. The OPC concrete with a target strength of 20 MPa was a control mix. The OPC based-specimens were cast and cured in water for 28 days before placed in peat water for another 28 days before the testing date. Compressive strength and tensile strength values of the concrete at 7 and 28 days were taken. Results show the type of concrete, fly ash content, and concrete grade significantly influence the early strength properties and resistance of the concrete to the acid attack. Four concrete mixtures with decreasing vulnerability to the attack were distinguished: OPC, high volume fly ash, geopolymer hybrid and blended cement concrete.

scholarly journals Effect of Morphologically Controlled Hematite Nanoparticles on the Properties of Fly Ash Blended Cement

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 1003
Author(s):  
Pantharee Kongsat ◽  
Sakprayut Sinthupinyo ◽  
Edgar A. O’Rear ◽  
Thirawudh Pongprayoon
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Size Distribution ◽  
Cement Hydration ◽  
Blended Cement ◽  
Spherical Shape ◽  
Particle Sizes ◽  
Fe2o3 Nanoparticles ◽  
Structure And Properties ◽  
Hematite Nanoparticles

Several types of hematite nanoparticles (α-Fe2O3) have been investigated for their effects on the structure and properties of fly ash (FA) blended cement. All synthesized nanoparticles were found to be of spherical shape, but of different particle sizes ranging from 10 to 195 nm depending on the surfactant used in their preparation. The cement hydration with time showed 1.0% α-Fe2O3 nanoparticles are effective accelerators for FA blended cement. Moreover, adding α-Fe2O3 nanoparticles in FA blended cement enhanced the compressive strength and workability of cement. Nanoparticle size and size distribution were important for optimal filling of various size of pores within the cement structure.

scholarly journals Kajian Karakteristik Beton Memadat Sendiri yang Menggunakan Serat Ijuk (Hal. 54-65)

2018 ◽  
Vol 4 (4) ◽  
pp. 54
Author(s):  
Iis Nurjamilah ◽  
Abinhot Sihotang
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Flexural Strength ◽  
Coarse Aggregate ◽  
Fresh Concrete ◽  
High Strength ◽  
Self Compacting Concrete ◽  
Palm Fiber ◽  
Fiber Concrete ◽  
Dilute Mixture

ABSTRAKKajian karakteristik beton memadat sendiri yang menggunakan serat ijuk merupakan sebuah kajian yang dilakukan untuk mengetahui pengaruh penambahan serat ijuk terhadap karakteristik beton memadat sendiri (SCC). Beton memadat sendiri yang menggunakan serat ijuk (PFSCC) didesain memiliki campuran yang encer, bermutu tinggi (= 40 MPa) dan memiliki persentase kekuatan lentur yang lebih baik. PFSCC  didapatkan dari hasil pencampuran antara semen sebanyak 85%, fly ash 15%, superplastizicer 1,5%, serat ijuk 0%, 0,5%; 1%; 1,5%; 2% dan 3% dari berat binder (semen + fly ash), kadar air 190 kg/m3, agregat kasar 552,47 kg/m3 dan pasir 1.063 kg/m3. Semakin banyak persentase penambahan serat ijuk ke dalam campuran berdampak terhadap menurunnya workability beton segar. Penambahan serat ijuk yang paling baik adalah sebanyak 1%, penambahan tersebut dapat meningkatkan kekuatan tekan beton sebesar 13% dan lentur sebesar 1,8%.Kata kunci: beton memadat sendiri (SCC), beton berserat, beton memadat sendiri yang menggunakan serat ijuk (PFSCC), serat ijuk ABSTRACTThe study of characteristics self compacting concrete using palm fibers is a study conducted to determine the effect of adding palm fibers to characteristics of self compacting concrete (SCC). palm fibers self compacting concrete (PFSCC) is designed to have a dilute mixture, high strength (= 40 MPa), and have better precentage flexural strength. PFSCC was obtained from mixing of 85% cement, 15% fly ash, 1.5% superplastizicer, 0%, 0.5%, 1%, 1.5%, 2% and 3% palm fibers from the weight of binder  (cement + fly ash), water content 190 kg/m3, coarse aggregate 552.47 kg/m3 and sand 1,063 kg/m3. The more persentage palm fibers content added to the mixture makes workability of fresh concrete decreases. The best addition of palm fiber is 1%, this addition can increases the compressive strength 13% and flexural strength 1.8%.Keywords: self compacting concrete (SCC), fiber concrete, Palm fiber self compacting concrete (PFSCC), palm fiber

scholarly journals Influence of Partial Replacement of Micro-Silica by Fly-Ash on Strength Properties of Reactive Powder Concrete

2020 ◽  
Vol 9 (3) ◽  
pp. 2932-2937
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Fly Ash ◽  
Mechanical Performance ◽  
Cementitious Materials ◽  
Partial Replacement ◽  
Reactive Powder Concrete ◽  
Experimental Investigations ◽  
Reactive Powder ◽  
Micro Silica

Reactive powder concrete (RPC) is the ultra-high strength concrete made by cementitious materials like silica fumes, cement etc. The coarse aggregates are completely replaced by quartz sand. Steel fibers which are optional are added to enhance the ductility. Market survey has shown that micro-silica is not so easily available and relatively costly. Therefore an attempt is made to experimentally investigate the reduction of micro-silica content by replacing it with fly-ash and mechanical properties of modified RPC are investigated. Experimental investigations show that compressive strength decreases gradually with addition of the fly ash. With 10 per cent replacement of micro silica, the flexural and tensile strength showed 40 and 46 per cent increase in the respective strength, though the decrease in the compressive strength was observed to be about 20 per cent. For further percentage of replacement, there was substantial drop in compressive, flexural as well as tensile strength. The experimental results thereby indicates that utilisation of fly-ash as a partial replacement to micro silica up to 10 per cent in RPC is feasible and shows quite acceptable mechanical performance with the advantage of utilisation of fly-ash in replacement of micro-silica.

scholarly journals Mechanical Effect of Steel Fiber on the Cement Replacement Materials of Self-Compacting Concrete

Fibers ◽  
2019 ◽  
Vol 7 (4) ◽  
pp. 36 ◽  
Author(s):  
Hisham Alabduljabbar ◽  
Rayed Alyousef ◽  
Fahed Alrshoudi ◽  
Abdulaziz Alaskar ◽  
Ahmed Fathi ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Silica Fume ◽  
Steel Fiber ◽  
Mechanical Effect ◽  
Splitting Tensile Strength ◽  
Self Compacting Concrete ◽  
Cement Replacement ◽  
Filling Ability ◽  
Concrete Mix

The behaviors of the fresh and mechanical properties of self-compacting concrete (SCC) are different from those of normal concrete mix. Previous research has investigated the benefits of this concrete mix by incorporating different constituent materials. The current research aims to develop a steel fiber reinforcement (SFR)‒SCC mixture and to study the effectiveness of different cement replacement materials (CRMs) on the fresh and mechanical properties of the SFR‒SCC mixtures. CRMs have been used to replace cement content, and the use of different water/cement ratios may lower the cost of CRMs, which include microwave-incinerated rice husk ash, silica fume, and fly ash. Fresh behavior, such as flow and filling ability and capacity segregation, was examined by a special test in SCC on the basis of their specifications. Moreover, compressive and splitting tensile strength tests were determined to simulate the hardened behavior for the concrete specimens. Experimental findings showed that, the V-funnel and L-box were within the accepted range for SCC. Tensile and flexural strength increases upon the use of 10% silica fume were found when compared with other groups; the ideal percentage of steel fiber that should be combined in this hybrid was 2% of the total weight of the binder. Overall, steel fibers generated a heightened compressive and splitting tensile strength in the self-compacting concrete mixes.

Sign in / Sign up

Export Citation Format

Share Document