scholarly journals MEMS Design Techniques and Performance Estimation in Connected Cars

2019 ◽  
Vol 9 (2) ◽  
pp. 1734-1739
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
Complex Structure ◽  
Optimal Solution ◽  
Learning Technologies ◽  
Performance Estimation ◽  
Automotive Electronics ◽  
Mems Sensor ◽  
Private And Public ◽  
And Performance

In order to design the complex structure, devices , systems of electronic products under the level micrometers the micro-electromechanical and micromachining system (MEMS) are mostly preferred. Micro machining techniques are initially lent directly from electronic integrated circuit (IC) industry. But now there were many techniques proposed with wide variety of transduction directly. Ample variety of MEMS transduction process can be used to convert real-world signal from one to another form. The process of conversion can be can be enabled by combining different sensors, actuators and Microsystems. Due to the process of partial consistency and a growing technology, the complex designs of sophisticated MEMS are produced. The combination of integrated circuits with MEMS can improve performance, but at the rate of development cost, complexity and time. With the fact & fast development and growth in the area of automotive electronics, IoT, cloud computing, artificial intelligence and machine learning technologies prompted us to have higher potential market to make the successful products which can impact the social and economic growth. In addition to this, MEMS are well appropriate for automation, medical electronics, and agriculture and space exploration. Thus will play an important and major role in future mission both in private and public sectors. The major problem in India and other developing countries are safety and security. This paper describes the optimal solution & design methodology to control the user end application using MEMS senso., where the controlling of the machineries can be done by MEMS sensor to control communicate via wireless communication

Enhancements of Non-contact Measurements of Electrical Waveforms on the Proximity of a Signal Surface Using Groups of Pulses

2002 ◽  
Author(s):  
Fenglei Du ◽  
Greg Bridges ◽  
D.J. Thomson ◽  
Rama R. Goruganthu ◽  
Shawn McBride ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
Signal To Noise Ratio ◽  
Electrostatic Force ◽  
Single Pulse ◽  
Electric Signal ◽  
Measurement Instruments ◽  
Cycle Times ◽  
Force Microscopy ◽  
And Performance

Abstract With the ever-increasing density and performance of integrated circuits, non-invasive, accurate, and high spatial and temporal resolution electric signal measurement instruments hold the key to performing successful diagnostics and failure analysis. Sampled electrostatic force microscopy (EFM) has the potential for such applications. It provides a noninvasive approach to measuring high frequency internal integrated circuit signals. Previous EFMs operate using a repetitive single-pulse sampling approach and are inherently subject to the signal-to-noise ratio (SNR) problems when test pattern duty cycle times become large. In this paper we present an innovative technique that uses groups of pulses to improve the SNR of sampled EFM systems. The approach can easily provide more than an order-ofmagnitude improvement to the SNR. The details of the approach are presented.

Automotive Approach to Obtaining Quality Integrated Circuits

1985 ◽  
Vol 28 (6) ◽  
pp. 24-26
Author(s):  
Michael Bustamante ◽  
Garrett Hicks
Keyword(s):  
Integrated Circuits ◽  
Case History ◽  
Integrated Circuit ◽  
Field Performance ◽  
Automotive Electronics ◽  
Electronic Feature ◽  
Performance Requirements ◽  
Reliability Characteristics

This paper describes the methods used by Chrysler Huntsville Automotive Electronics to obtain the quality, durability and reliability characteristics needed to fulfill the 193,200-km (120,000 mile) field performance requirements for Chrysler engine controls, radios and other electronic feature products. The paper will describe a case history, including the steps taken by both Chrysler Huntsville Automotive Electronics plant and one of their integrated circuit suppliers to attain certain quality levels.

scholarly journals High Temperature Silicon Integrated Circuits and Passive Components for Commercial and Military Applications

1998 ◽  
Author(s):  
Richard R. Grzybowski ◽  
Ben Gingrich
Keyword(s):  
High Temperature ◽  
Integrated Circuits ◽  
Integrated Circuit ◽  
Elevated Temperatures ◽  
Silicon On Insulator ◽  
Passive Component ◽  
Oil Well ◽  
Automotive Electronics ◽  
Passive Components ◽  
Silicon Integrated Circuits

Advances in silicon-on-insulator (SOI) integrated circuit technology and the steady development of wider band gap semiconductors like silicon carbide are enabling the practical deployment of high temperature electronics. High temperature civilian and military electronics applications include distributed controls for aircraft, automotive electronics, electric vehicles and instrumentation for geothermal wells, oil well logging and nuclear reactors. While integrated circuits are key to the realization of complete high temperature electronic systems, passive components including resistors, capacitors, magnetics and crystals are also required. This paper will present characterization data obtained from a number of silicon high temperature integrated evaluated over a range of elevated temperatures and aged at a selected high temperature. This paper will also present a representative cross section of high temperature passive component characterization data for device types needed by many applications. Device types represented will include both small signal and power resistors and capacitors. Specific problems encountered with the employment of these devices in harsh environments will be discussed for each family of components. The goal in presenting this information is to demonstrate the viability of a significant number of commercially available silicon integrated circuits and passive components that operate at elevated temperatures as well as to encourage component suppliers to continue to optimize a selection of their product offerings for operation at higher temperatures. In addition, systems designers will be encouraged to view this information with an eye toward the conception and implementation of reliable and affordable high temperature systems.

High Temperature CMOS Circuits on Silicon Carbide

2015 ◽  
Vol 821-823 ◽  
pp. 859-862 ◽  
Author(s):  
E. Ramsay ◽  
James Breeze ◽  
David T. Clark ◽  
A. Murphy ◽  
D. Smith ◽  
...  
Keyword(s):  
Silicon Carbide ◽  
Integrated Circuits ◽  
Integrated Circuit ◽  
Power Dissipation ◽  
Cmos Process ◽  
Low Leakage ◽  
Current Path ◽  
Pulse Width Modulator ◽  
Wide Range ◽  
And Performance

This paper presents the characteristics and performance of a range of Silicon Carbide (SiC) CMOS integrated circuits fabricated using a process designed to operate at temperatures of 300°C and above. The properties of Silicon carbide enable both n-channel and p-channel MOSFETS to operate at temperatures above 400°C [1] and we are developing a CMOS process to exploit this capability [4]. The operation of these transistors and other integrated circuit elements such as resistors and contacts is presented across a temperature range of room temperature to +400°C. We have designed and fabricated a wide range of test and demonstrator circuits. A set of six simple logic parts, such as a quad NAND and NOR gates, have been stressed at 300°C for extended times and performance results such as propagation delay drive levels, threshold levels and current consumption versus stress time are presented. Other circuit implementations, with increased logic complexity, such as a pulse width modulator, a configurable timer and others have also been designed, fabricated and tested. The low leakage characteristics of SiC has allowed the implementation of a very low leakage analogue multiplexer showing less than 0.5uA channel leakage at 400°C. Another circuit implemented in SiC CMOS demonstrates the ability to drive SiC power switching devices. The ability of CMOS to provide an active pull up and active pull down current can provide the charging and discharging current required to drive a power MOSFET switch in less than 100ns. Being implemented in CMOS, the gate drive buffer benefits from having no direct current path from the power rails, except during switching events. This lowers the driver power dissipation. By including multiple current paths through independently switched transistors, the gate drive buffer circuit can provide a high switching current and then a lower sustaining current as required to minimize power dissipation when driving a bipolar switch.

High Temperature Silicon Integrated Circuits and Passive Components for Commercial and Military Applications

1999 ◽  
Vol 121 (4) ◽  
pp. 622-628 ◽  
Author(s):  
R. R. Grzybowski ◽  
B. Gingrich
Keyword(s):  
High Temperature ◽  
Integrated Circuits ◽  
Integrated Circuit ◽  
Elevated Temperatures ◽  
Silicon On Insulator ◽  
Passive Component ◽  
Oil Well ◽  
Automotive Electronics ◽  
Passive Components ◽  
Silicon Integrated Circuits

Advances in silicon-on-insulator (SOI) integrated circuit technology and the steady development of wider band gap semiconductors like silicon carbide are enabling the practical deployment of high temperature electronics. High temperature civilian and military electronics applications include distributed controls for aircraft, automotive electronics, electric vehicles and instrumentation for geothermal wells, oil well logging, and nuclear reactors. While integrated circuits are key to the realization of complete high temperature electronic systems, passive components including resistors, capacitors, magnetics, and crystals are also required. This paper will present characterization data obtained from a number of silicon high temperature integrated evaluated over a range of elevated temperatures and aged at a selected high temperature. This paper will also present a representative cross section of high temperature passive component characterization data for device types needed by many applications. Device types represented will include both small signal and power resistors and capacitors. Specific problems encountered with the employment of these devices in harsh environments will be discussed for each family of components. The goal in presenting this information is to demonstrate the viability of a significant number of commercially available silicon integrated circuits and passive components that operate at elevated temperatures as well as to encourage component suppliers to continue to optimize a selection of their product offerings for operation at higher temperatures. In addition, systems designers will be encouraged to view this information with an eye towards the conception and implementation of reliable and affordable high temperature systems.

Experimental Measurement of the Thermal Performance of a Two-Die 3D Integrated Circuit (3D IC)

2013 ◽  
Author(s):  
Leila Choobineh ◽  
Nick Vo ◽  
Trent Uehling ◽  
Ankur Jain
Keyword(s):  
Integrated Circuits ◽  
Thermal Performance ◽  
Integrated Circuit ◽  
Three Dimensional ◽  
Electrical Current ◽  
Thermal Design ◽  
3D Ic ◽  
Thermal Models ◽  
3D Ics ◽  
And Performance

Accurate measurement of the thermal performance of vertically-stacked three-dimensional integrated circuits (3D ICs) is critical for optimal design and performance. Experimental measurements also help validate thermal models for predicting the temperature field in a 3D IC. This paper presents results from thermal measurements on a two-die 3D IC. The experimental setup and procedure is described. Transient and steady-state measurements are made while heating the top die or the bottom die. Results indicate that passage of electrical current through the heaters in top/bottom die induces a measureable temperature rise. There appears to be a unique asymmetry in thermal performance between the top die and the bottom die. The top die is found to heat up faster and more than the bottom die. Results presented in this paper are expected to play a key role in validation of simulation-based and analytical thermal models for 3D ICs, and lead to a better fundamental understanding of heat transport in stacked systems. This is expected to lead to effective thermal design and characterization tools for 3D ICs.

Scanning Electron Microscopy in Hybrid Microelectronics

1976 ◽  
Vol 34 ◽  
pp. 456-457
Author(s):  
S. Khadpe ◽  
R. Faryniak
Keyword(s):  
Integrated Circuits ◽  
Thick Film ◽  
Integrated Circuit ◽  
Failure Modes ◽  
Three Dimensional ◽  
Circuit Components ◽  
Hybrid Microcircuit ◽  
Electrical Connections ◽  
Scanning Electron

The Scanning Electron Microscope (SEM) is an important tool in Thick Film Hybrid Microcircuits Manufacturing because of its large depth of focus and three dimensional capability. This paper discusses some of the important areas in which the SEM is used to monitor process control and component failure modes during the various stages of manufacture of a typical hybrid microcircuit.Figure 1 shows a thick film hybrid microcircuit used in a Motorola Paging Receiver. The circuit consists of thick film resistors and conductors screened and fired on a ceramic (aluminum oxide) substrate. Two integrated circuit dice are bonded to the conductors by means of conductive epoxy and electrical connections from each integrated circuit to the substrate are made by ultrasonically bonding 1 mil aluminum wires from the die pads to appropriate conductor pads on the substrate. In addition to the integrated circuits and the resistors, the circuit includes seven chip capacitors soldered onto the substrate. Some of the important considerations involved in the selection and reliability aspects of the hybrid circuit components are: (a) the quality of the substrate; (b) the surface structure of the thick film conductors; (c) the metallization characteristics of the integrated circuit; and (d) the quality of the wire bond interconnections.

TEM study of phosphorus-implanted pseudomorphic Si0.88Ge0.12 on Si(100)

1995 ◽  
Vol 53 ◽  
pp. 468-469
Author(s):  
N. David Theodore ◽  
Donald Y.C Lie ◽  
J. H. Song ◽  
Peter Crozier
Keyword(s):  
Integrated Circuits ◽  
Heterojunction Bipolar Transistors ◽  
Integrated Circuit ◽  
High Speed ◽  
Room Temperature ◽  
Strain Relaxation ◽  
Bipolar Transistors ◽  
Sige Hbt ◽  
Integrated Circuit Manufacturing ◽  
Microstructural Behavior

SiGe is being extensively investigated for use in heterojunction bipolar-transistors (HBT) and high-speed integrated circuits. The material offers adjustable bandgaps, improved carrier mobilities over Si homostructures, and compatibility with Si-based integrated-circuit manufacturing. SiGe HBT performance can be improved by increasing the base-doping or by widening the base link-region by ion implantation. A problem that arises however is that implantation can enhance strain-relaxation of SiGe/Si.Furthermore, once misfit or threading dislocations result, the defects can give rise to recombination-generation in depletion regions of semiconductor devices. It is of relevance therefore to study the damage and anneal behavior of implanted SiGe layers. The present study investigates the microstructural behavior of phosphorus implanted pseudomorphic metastable Si0.88Ge0.12 films on silicon, exposed to various anneals.Metastable pseudomorphic Si0.88Ge0.12 films were grown ~265 nm thick on a silicon wafer by molecular-beam epitaxy. Pieces of this wafer were then implanted at room temperature with 100 keV phosphorus ions to a dose of 1.5×1015 cm-2.

Corporate Governance and Performance of Organizations

2018 ◽  
Vol 9 (5) ◽  
pp. 439-446
Author(s):  
Hamid Ait lemqeddem ◽  
◽  
Mounya Tomas ◽  
Keyword(s):  
Corporate Governance ◽  
Agency Theory ◽  
Theoretical Foundation ◽  
Quantitative Approach ◽  
Governance Practices ◽  
Deductive Method ◽  
Private And Public ◽  
Is Theory ◽  
And Performance ◽  
Do So

There is renewed interest in the need to focus on corporate governance in an environment where it is a performance imperative for all small and large organizations, private and public, beginner or established.The purpose of this study is to demonstrate the place of corporate governance practices in organizations to ensure that the board, officers, and directors take action to protect shareholder interests and all stakeholders. It is important to focus on the effect of these practices on improving performance and competitiveness. To do so, we opted for the hypothetico-deductive method with a quantitative approach. Our theoretical foundation is theory is agency theory.

Micromechanics Measurements Applied to Integrated Circuit Microelectronics

1997 ◽  
Vol 473 ◽  
Author(s):  
David R. Clarke
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
Fracture Resistance ◽  
Interface Fracture ◽  
New Techniques ◽  
Fracture Properties ◽  
Engineered Structures ◽  
Mechanical And Fracture Properties ◽  
Interconnect Lines ◽  
Metallic Interconnect

ABSTRACTAs in other engineered structures, fracture occasionally occurs in integrated microelectronic circuits. Fracture can take a number of forms including voiding of metallic interconnect lines, decohesion of interfaces, and stress-induced microcracking of thin films. The characteristic feature that distinguishes such fracture phenomena from similar behaviors in other engineered structures is the length scales involved, typically micron and sub-micron. This length scale necessitates new techniques for measuring mechanical and fracture properties. In this work, we describe non-contact optical techniques for probing strains and a microscopic “decohesion” test for measuring interface fracture resistance in integrated circuits.

Sign in / Sign up

Export Citation Format

Share Document