scholarly journals Silver-decorated gel-shell nanobeads: physicochemical characterization and evaluation of antibacterial properties

2020 ◽  
Vol 11 ◽  
pp. 620-630 ◽  
Author(s):  
Marta Bartel ◽  
Katarzyna Markowska ◽  
Marcin Strawski ◽  
Krystyna Wolska ◽  
Maciej Mazur
Keyword(s):  
Silver Nanoparticles ◽  
Sodium Borohydride ◽  
Staphylococcus Epidermidis ◽  
Photoelectron Spectroscopy ◽  
Antibacterial Properties ◽  
Physicochemical Characterization ◽  
Silver Ions ◽  
X Ray ◽  
Gel Layer ◽  
Lower Oxidation

We report on the synthesis of composite nanobeads with antibacterial properties. The particles consist of polystyrene cores that are surrounded by sulfonic gel shells with embedded silver nanoparticles. The nanocomposite beads are prepared by sulfonation of polystyrene particles followed by accumulation of silver ions in the shell layer and subsequent reduction with sodium borohydride. The resulting material has been characterized by electron microscopy, vibrational and X-ray photoelectron spectroscopy and several other experimental techniques. It was shown that sodium borohydride reduces silver ions embedded in the gel layer producing silver nanoparticles but also transforms a fraction of sulfonic groups in the polymer to moieties with sulfur in a lower oxidation state, likely thiols. It is hypothesized that the generated thiol groups are anchoring the nanoparticles in the gel shell of the nanobeads stabilizing the whole structure. The silver-decorated nanobeads appear to be a promising material with considerable antimicrobial activity and were tested against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Staphylococcus epidermidis. The determined minimum inhibitory (MIC) and minimum biofilm inhibitory (MBIC) concentrations are comparable to those of non-incorporated silver nanoparticles.

scholarly journals Plasmon Resonance of Silver Nanoparticles as a Method of Increasing Their Antibacterial Action

Antibiotics ◽  
2018 ◽  
Vol 7 (3) ◽  
pp. 80 ◽  
Author(s):  
Alexander Vasil’kov ◽  
Ruslan Dovnar ◽  
Siarhei Smotryn ◽  
Nikolai Iaskevich ◽  
Alexander Naumkin
Keyword(s):  
Staphylococcus Aureus ◽  
Silver Nanoparticles ◽  
Plasmon Resonance ◽  
Photoelectron Spectroscopy ◽  
Antibacterial Properties ◽  
Petri Dish ◽  
Aureus Strain ◽  
Gram Positive ◽  
Gram Negative ◽  
X Ray

In this article, a series of silver-containing dressings are prepared by metal-vapor synthesis (MVS), and their antibacterial properties are investigated. The antibacterial activity of the dressings containing silver nanoparticles (AgNPs) against some Gram-positive, and Gram-negative microorganisms (Staphylococcus aureus, Staphylococcus haemolyticus, Pseudomonas aeruginosa, Klebsiella pneumoniae, Escherichia coli, Moraxella spp.) has been determined. Based on the plasmon resonance frequency of these nanoparticles, the frequency of laser irradiation of the dressing was chosen. The gauze bandage examined showed pronounced antibacterial properties, especially to Staphylococcus aureus strain. When 470 nm laser radiation, with a power of 5 mW, was applied for 5 min, 4 h after inoculating the Petri dish, and placing a bandage containing silver nanoparticles on it, the antibacterial effect of the latter significantly increased—both against Gram-positive and Gram-negative microorganisms. The structure and chemical composition of the silver-containing nanocomposite were studied by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and extended X-ray absorption fine structure (EXAFS). The synthesized AgNPs demonstrate narrow and monomodal particle size distribution with an average size of 1.75 nm. Atoms of metal in Ag/bandage system are mainly in Ag0 state, and the oxidized atoms are in the form of Ag-Ag-O groups.

scholarly journals Optimization of ZnO Nanorods Growth on Polyetheresulfone Electrospun Mats to Promote Antibacterial Properties

Molecules ◽  
2020 ◽  
Vol 25 (7) ◽  
pp. 1696
Author(s):  
Mario Salmeri ◽  
Giulia Ognibene ◽  
Lorena Saitta ◽  
Cinzia Lombardo ◽  
Carlo Genovese ◽  
...  
Keyword(s):  
Staphylococcus Epidermidis ◽  
Photoelectron Spectroscopy ◽  
Zno Nanorods ◽  
Antibacterial Properties ◽  
Antimicrobial Properties ◽  
Compositional Analysis ◽  
Process Conditions ◽  
Electrospun Fibers ◽  
X Ray ◽  
Colony Forming Units

Zinc oxide (ZnO) nanorods grown by chemical bath deposition (CBD) on the surface of polyetheresulfone (PES) electrospun fibers confer antimicrobial properties to the obtained hybrid inorganic–polymeric PES/ZnO mats. In particular, a decrement of bacteria colony forming units (CFU) is observed for both negative (Escherichia coli) and positive (Staphylococcus aureus and Staphylococcus epidermidis) Grams. Since antimicrobial action is strictly related to the quantity of ZnO present on surface, a CBD process optimization is performed to achieve the best results in terms of coverage uniformity and reproducibility. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) provide morphological and compositional analysis of PES/ZnO mats while thermogravimetric analysis (TGA) is useful to assess the best process conditions to guarantee the higher amount of ZnO with respect to PES scaffold. Biocidal action is associated to Zn2+ ion leaching in solution, easily indicated by UV–Vis measurement of metallation of free porphyrin layers deposited on glass.

scholarly journals Lactoferrin/Calcium Phosphate-Modified Porous Ti by Biomimetic Mineralization: Effective Infection Prevention and Excellent Osteoinduction

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 992
Author(s):  
Song Chen ◽  
Yuanli He ◽  
Linna Zhong ◽  
Wenjia Xie ◽  
Yiyuan Xue ◽  
...  
Keyword(s):  
Calcium Phosphate ◽  
Photoelectron Spectroscopy ◽  
Antibacterial Properties ◽  
Biomimetic Mineralization ◽  
Matrix Mineralization ◽  
X Ray ◽  
Porous Ti ◽  
Potential Applications ◽  
Modification Of Titanium

The surface modification of titanium (Ti) can enhance the osseointegration and antibacterial properties of implants. In this study, we modified porous Ti discs with calcium phosphate (CaP) and different concentrations of Lactoferrin (LF) by biomimetic mineralization and examined their antibacterial effects and osteogenic bioactivity. Firstly, scanning electron microscopy (SEM), the fluorescent tracing method, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and the releasing kinetics of LF were utilized to characterize the modified Ti surface. Then, the antibacterial properties against S. sanguis and S. aureus were investigated. Finally, in vitro cytological examination was performed, including evaluations of cell adhesion, cell differentiation, extracellular matrix mineralization, and cytotoxicity. The results showed that the porous Ti discs were successfully modified with CaP and LF, and that the LF-M group (200 μg/mL LF in simulated body fluid) could mildly release LF under control. Further, the LF-M group could effectively inhibit the adhesion and proliferation of S. sanguis and S. aureus and enhance the osteogenic differentiation in vitro with a good biocompatibility. Consequently, LF-M-modified Ti may have potential applications in the field of dental implants to promote osseointegration and prevent the occurrence of peri-implantitis.

Immobilization of Silver Nanoparticles on Chitosan-Coated Silica-Gel-Beads and the Antibacterial Activity

2021 ◽  
Vol 892 ◽  
pp. 36-42
Author(s):  
Muhammad Iqbal Hidayat ◽  
Muhammad Adlim ◽  
Ilham Maulana ◽  
Muhammad Zulfajri
Keyword(s):  
Silver Nanoparticles ◽  
Silica Gel ◽  
Low Cost ◽  
Antibacterial Properties ◽  
Chitosan Film ◽  
Silver Ions ◽  
Filter Material ◽  
Silver Ion ◽  
Gel Beads ◽  
Metal Colloid

Silver nanoparticles (Ag0) have attracted the most attention due to their broad antimicrobial application and outstanding activity. The silver nanoparticles are usually in colloidal form, then immobilization the colloid onto solid support is still interesting to explore. In this work, a new method for silver colloidal nanoparticle immobilization on silica gel beads (SiG), which was then symbolized as Ag0-[chi-SiG] was conducted and characterized successfully. The finding proved that SiG must be coated with three chitosan film layers to give stable support for silver nanoparticles. This coating method caused the chitosan completely covered SiG, and the chitosan film provides coordination bonding for silver ions. The most appropriate solvent for silver ion impregnation on the surface of chi-SiG is methanol compared to other solvents. Tungsten lamp as the photo-irradiation, which is low cost and environmentally friendly has been proven effective for silver ion reduction, as shown by silver metal colloid UV-Vis surface plasmon resonance at 400-700 nm. Ag0-[chi-SiG] showed the antibacterial properties of inhibiting the growth Staphylococcus aureus and Escherichia coli; then it provides the potential application for antibacterial filter material. According to the weight comparison between antibacterial standard and Ag content, then Ag0-[chi-SiG] has two and five times higher of exhibiting zone for each bacteria.

Pretreated Lignocellulosic Waste Mediated Biosynthesis of Silver Nanoparticles Under Room Temperature

2016 ◽  
Vol 15 (05n06) ◽  
pp. 1660001 ◽  
Author(s):  
V. P. Manjamadha ◽  
Karuppan Muthukumar
Keyword(s):  
Silver Nanoparticles ◽  
Silver Nitrate ◽  
Room Temperature ◽  
Nitrate Solution ◽  
Silver Ions ◽  
Silver Nitrate Solution ◽  
Morphological Characterization ◽  
Alternative Source ◽  
X Ray ◽  
Antibacterial Performance

The current work elucidates the utilization of biowaste as a valuable reducing agent for the synthesis of silver nanoparticles. In this study, the wastewater generated during the alkaline pretreatment of lignocellulosic wastes (APLW) was used as a bioreductant to reduce silver nitrate under room temperature. Synthesis of stable silver nanoparticles (AgNPs) was achieved rapidly on addition of APLW into the silver nitrate solution (1[Formula: see text]mM). The morphological characterization of AgNPs was performed using field emission scanning electron microscopy (FESEM). The micrograph clearly depicted the presence of spherical AgNPs. The presence of elemental silver along with biomoilties was determined using energy dispersive X-ray spectroscopy (EDAX) analysis. The X-ray diffraction (XRD) study proved the crystalline form of stable AgNPs. The AgNPs exhibited excellent antibacterial performance against Gram negative organism. The immediate bioreduction of silver ions using APLW was well illustrated in the present study. Thus, APLW serve as an alternative source for reducing agents instead of utilizing valuable medicinal plants for nanoparticles synthesis.

scholarly journals Green Synthesis of Silver Nanoparticles using Salacca zalacca Extract as Reducing Agent and It’s Antibacterial Activity

2019 ◽  
Vol 31 (12) ◽  
pp. 2804-2810
Author(s):  
Anti Kolonial Prodjosantoso ◽  
Oktanio Sigit Prawoko ◽  
Maximus Pranjoto Utomo ◽  
Lis Permana Sari
Keyword(s):  
Escherichia Coli ◽  
Silver Nanoparticles ◽  
Antibacterial Activity ◽  
Staphylococcus Epidermidis ◽  
Silver Ions ◽  
Reduction Reaction ◽  
Face Centered Cubic ◽  
Gram Positive Bacteria ◽  
Transmission Electron ◽  
Face Centered

In this article, the synthesis of silver nanoparticles through a reduction reaction process using Salacca zalacca extract is reported. The AgNPs were characterized using X-ray diffraction, transmission electron microscopy, Fourier transform infrared and UV-visible spectrophotometry methods. The AgNPs antibacterial activity was determined against of Gram-positive bacteria (Staphylococcus epidermidis) and Gram-negative bacteria (Escherichia coli). The main functional groups contained in Salacca zalacca extract are carbonyl, hydroxyl and nitrile groups, which are believed to reduce the silver ions to metal. The surface plasmon resonance values of brownish red AgNPs are in the range of 410 nm to 460 nm. The structure of AgNPs is face centered cubic (FCC). The diameter of silver nanoparticles crystallite is 14.2 ± 2.6 nm. The AgNPs growth inhibition zones of Escherichia coli and Staphylococcus epidermidis are 9.6 mm and 9.2 mm, respectively.

Preparation of PCL/PVP/Ag Nanofiber Membranes by Electrospinning Method

2012 ◽  
Vol 268-270 ◽  
pp. 580-583 ◽  
Author(s):  
Yong Tang Jia ◽  
Cui Wu ◽  
Feng Chun Dong ◽  
Gang Huang ◽  
Xian Hua Zeng
Keyword(s):  
Silver Nanoparticles ◽  
Photoelectron Spectroscopy ◽  
Composite Nanofibers ◽  
Average Diameter ◽  
Vinyl Pyrrolidone ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electrospinning Method ◽  
Nanofiber Membranes ◽  
Poly Vinyl Pyrrolidone

The composite nanofiber membranes of poly (ε-caprolactone)/poly(vinyl pyrrolidone) (PCL/PVP) containing silver nanoparticles were prepared by electrospinning method. The morphology of composite nanofibers was characterized by scanning electron microscopy (SEM). The silver nanoparticles on the electrospun fibers were characterized by X-Ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The contact angle and water uptake of PCL/PVP/Ag nanofiber membranes were measured. The SEM photos indicated that the average diameter of the fibers was significantly decreased with the addition of silver nanoparticles. The X-Ray images showed that Ag nanoparticles were distributed on the surface of nanofiber membranes. When the PVP mole ratio was higher than 15%, the nanofiber membranes showed good hydrophilic property. The PCL/PVP/Ag nanofiber membranes could be applied to prepare wound dressing.

scholarly journals One-Step Reinforcement and Deacidification of Paper Documents: Application of Lewis Base—Chitosan Nanoparticle Coatings and Analytical Characterization

Coatings ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1226
Author(s):  
Zhihui Jia ◽  
Chun Yang ◽  
Fangnan Zhao ◽  
Xiaolian Chao ◽  
Yuhu Li ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Chitosan Nanoparticles ◽  
Antibacterial Properties ◽  
Interaction Mechanism ◽  
Accelerated Aging ◽  
Natural Aging ◽  
Lewis Base ◽  
X Ray ◽  
Chitosan Nanoparticle ◽  
One Step

To delay acidification and deterioration during natural aging, deacidification and reinforcement of paper manuscripts have been the most important technologies to prolong the life of objects. Herein, a novel approach for the conservation of paper manuscripts is proposed using chitosan nanoparticles as Lewis base that leads to both deacidification and strengthening of paper in one-step. Chitosan nanoparticles were prepared through physical ball grinding method and characterized via scanning electron microscopy (SEM), X-ray diffraction (XRD), laser particle size analyzer (LPSA), Fourier transform infrared spectroscopy (FTIR), and atomic force microscope (AFM). To evaluate the resistance of chitosan nanoparticle coating, the mechanical properties of paper after artificial aging were evaluated using dry heat and hygrothermal accelerated aging methods. The SEM, EDX, and X-ray Photoelectron Spectroscopy (XPS) were used to analyze the interaction mechanism between chitosan and Shuxuan paper. The results show that the coated paper had superior durability with respect to pH, tensile strength, and folding endurance. There was a presence of protonated amines in the form of ammonium salts due to ionic bindings with free H+ in the acidified paper, and the remaining –NH2 could be used as a base reserve. Finally, the resulting coated papers displayed good antibacterial properties.

scholarly journals Degradation of Methylene Blue Using Biologically Synthesized Silver Nanoparticles

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
M. Vanaja ◽  
K. Paulkumar ◽  
M. Baburaja ◽  
S. Rajeshkumar ◽  
G. Gnanajobitha ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Silver Nanoparticles ◽  
Leaf Extract ◽  
Nitrate Solution ◽  
Reaction Medium ◽  
Silver Ions ◽  
Silver Nitrate Solution ◽  
X Ray ◽  
Synthesis Of Nanoparticles ◽  
Aqueous Leaf Extract

Nowadays plant mediated synthesis of nanoparticles has great interest and achievement due to its eco-benign and low time consuming properties. In this study silver nanoparticles were successfully synthesized by usingMorinda tinctorialeaf extract under different pH. The aqueous leaf extract was added to silver nitrate solution; the color of the reaction medium was changed from pale yellow to brown and that indicates reduction of silver ions to silver nanoparticles. Thus synthesized silver nanoparticles were characterized by UV-Vis spectrophotometer. Dispersity and morphology was characterized by scanning electron microscope (SEM); crystalline nature and purity of synthesized silver nanoparticles were revealed by X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX). FTIR spectrum was examined to identify the effective functional molecules responsible for the reduction and stabilization of silver nanoparticles synthesized by leaf extract. The photocatalytic activity of the synthesized silver nanoparticles was examined by degradation of methylene blue under sunlight irradiation. Green synthesized silver nanoparticles were effectively degrading the dye nearly 95% at 72 h of exposure time.

scholarly journals Heat Treatment Effect on Eu3+ Doped TeO2-BaO-Bi2O3 Glass Systems with Ag Nanoparticles

2017 ◽  
Vol 2017 ◽  
pp. 1-12 ◽  
Author(s):  
Tomasz Lewandowski ◽  
Michał Dembski ◽  
Michalina Walas ◽  
Marcin Łapiński ◽  
Magdalena Narajczyk ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Silver Nanoparticles ◽  
Photoelectron Spectroscopy ◽  
Rare Earth Ions ◽  
Molar Ratio ◽  
Excitation Wavelength ◽  
X Ray ◽  
Dsc Measurements ◽  
Heat Treated ◽  
Luminescence Measurement

Glass systems of 73TeO2-4BaO-3Bi2O3-2Eu2O3-xAg (in molar ratio where x = 0, 1, 2, and 3) compositions have been successfully synthesized. Silver nanoparticles were obtained with the employment of heat treatment (HT) procedure executed at 350°C. Glass transition temperatures of different compositions have been determined through DSC measurements. XRD results presented characteristic amorphous halo indicating lack of long range order in the samples. FTIR structural studies revealed that glass matrix is mainly composed of TeO3 and TeO4 species and is stable after different applied heat treatment times. X-ray photoelectron spectroscopy (XPS) measurements confirmed that in selected samples part of Ag ions changed oxidation state to form Ag0 species. TEM measurements revealed nanoparticles of size in the range of 20–40 nm. UV-vis absorption results demonstrated characteristic transitions of Eu3+ ions. Additionally, UV-vis spectra of samples heat-treated for 6, 12, 24, and 48 hours presented bands related to silver nanoparticles. Photoluminescence (PL) studies have been performed with excitation wavelength of λexc=395 nm. Obtained spectra exhibited peaks due to 5D0-7FJ (where J=2,3,4) and 5D1-7FJ (where J=1,2,3) transitions of Eu3+. Moreover, luminescence measurement indicated enhancement of rare earth ions emissions in several of the annealed samples. Increase of emission intensity of about 35% has been observed.

Sign in / Sign up

Export Citation Format

Share Document