scholarly journals EFFICIENCY OF INERTIAL PRECIPITATION OF SUSPENDED PARTICLES IN HIGH‐SPEED FIBROUS FILTERS

2007 ◽  
Vol 15 (3) ◽  
pp. 153-157
Author(s):  
Arnold Waldberg ◽  
Sergej Safonov
Keyword(s):  
High Speed ◽  
Suspended Particle ◽  
Theoretic Analysis ◽  
Method Of Calculation ◽  
Fibrous Filters ◽  
Experimental Assembly ◽  
Testing Techniques ◽  
Technological Mode ◽  
Physical Analogy

The paper gives theoretic analysis and results of experimental investigation of suspended particle collecting in high‐speed fibrous mist collectors. A dominating role of inertial mechanism of suspended particle precipitation in highspeed mist collectors was determined and a method of calculation of their efficiency by means of probability integral was proposed. Applicability of physical analogy method to deduction of dependency determining values of d50 (diameter of particles collected in an apparatus under given technological mode of its operation with the efficiency of 50 %) on the basis of experimental data is shown. Experimental assembly used for research, testing techniques and result estimating methods are described. Investigation results allowed achieving an improved formula for calculating the value of d50 depending on hydraulic resistance of apparatus and density of collected particles.

scholarly journals Explosive Burning of a Mechanically Activated Al and CuO Thermite Mixture

Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 489
Author(s):  
Alexander Dolgoborodov ◽  
Boris Yankovsky ◽  
Sergey Ananev ◽  
George Valyano ◽  
Galina Vakorina
Keyword(s):  
High Speed ◽  
Open Space ◽  
Random Distribution ◽  
Diagnostic Tools ◽  
Thermite Mixture ◽  
Reaction Region ◽  
Experimental Assembly ◽  
Effective Use ◽  
Contact Sensors

The results of experiments to determine the role of structural schemes for the ignition of a mechanically activated thermite mixture Al–CuO and the formation of its combustion flame are presented. The reaction initiated in the bulk of the experimental assembly transforms into torch combustion in an open space. The dynamics of the volume of the flame reaction region was determined. The stage of flame formation has a stochastic character, determined by the random distribution of the reaction centres in the initial volume of the components. A high-speed camera, a pyrometer and electro contact sensors were used as diagnostic tools. The ultimate goal of the study was to optimize the conditions for the flame formation of this mixture for its effective use with a single ignition of various gas emissions.

World Economic Crisis as a Process of Substitution of Technological Modes

2009 ◽  
pp. 26-38 ◽  
Author(s):  
S. Glaziev
Keyword(s):  
Economic Crisis ◽  
Economic Activity ◽  
Sharp Increase ◽  
Energy Resources ◽  
Long Wave ◽  
The World ◽  
World Economic ◽  
Technological Mode ◽  
World Economic Crisis

The article analyzes fundamental reasons for the world economic crisis in the light of global technological shifts. It proves that it is caused by the substitution of technological modes. It is shown that sharp increase and slump in stock indices and prices for energy resources are typical of the process of technological substitution which occurs regularly according to the rhythm of long-wave fluctuations of the world economic activity. The article rationalizes a package of anti-crisis measures aimed at stimulating the new technological mode. Its structure and role of the locomotive factor of the new long wave of economic growth are revealed.

A Statistical Study of Process Variables to Optimize a High Speed Curtain Coater: Part I

TAPPI Journal ◽  
2009 ◽  
Vol 8 (1) ◽  
pp. 20-26 ◽  
Author(s):  
PEEYUSH TRIPATHI ◽  
MARGARET JOYCE ◽  
PAUL D. FLEMING ◽  
MASAHIRO SUGIHARA
Keyword(s):  
Boundary Layer ◽  
Experimental Design ◽  
High Speed ◽  
Statistical Study ◽  
Process Variables ◽  
High Speeds ◽  
The Stability ◽  
Air Removal ◽  
Removal System

Using an experimental design approach, researchers altered process parameters and material prop-erties to stabilize the curtain of a pilot curtain coater at high speeds. Part I of this paper identifies the four significant variables that influence curtain stability. The boundary layer air removal system was critical to the stability of the curtain and base sheet roughness was found to be very important. A shear thinning coating rheology and higher curtain heights improved the curtain stability at high speeds. The sizing of the base sheet affected coverage and cur-tain stability because of its effect on base sheet wettability. The role of surfactant was inconclusive. Part II of this paper will report on further optimization of curtain stability with these four variables using a D-optimal partial-facto-rial design.

LANDSLIDE RISK MANAGEMENT IN THE COASTAL ZONE OF THE KUIBYSHEV RESERVOIR DUE THE DESIGN OF HIGH-SPEED LINE "MOSCOW-KAZAN"

2017 ◽  
Author(s):  
Nikolai Petrov ◽  
Nikolai Petrov ◽  
Inna Nikonorova ◽  
Inna Nikonorova ◽  
Vladimir Mashin ◽  
...  
Keyword(s):  
High Speed ◽  
Computational Models ◽  
Stable State ◽  
Landslide Risk ◽  
Kuibyshev Reservoir ◽  
Stepped Surface ◽  
The Stability ◽  
Landslide Slope ◽  
The Village

High-speed railway "Moscow-Kazan" by the draft crosses the Volga (Kuibyshev reservoir) in Chuvashia region 500 m below the village of New Kushnikovo. The crossing plot is a right-bank landslide slope with a stepped surface. Its height is 80 m; the slope steepness -15-16o. The authors should assess the risk of landslides and recommend anti-landslide measures to ensure the safety of the future bridge. For this landslide factors have been analyzed, slope stability assessment has been performed and recommendations have been suggested. The role of the following factors have been analyzed: 1) hydrologic - erosion and abrasion reservoir and runoff role; 2) lithologyc (the presence of Urzhum and Northern Dvina horizons of plastically deformable rocks, displacement areas); 3) hydrogeological (the role of perched, ground and interstratal water); 4) geomorphological (presence of the elemental composition of sliding systems and their structure in the relief); 5) exogeodynamic (cycles and stages of landslide systems development, mechanisms and relationship between landslide tiers of different generations and blocks contained in tiers). As a result 6-7 computational models at each of the three engineering-geological sections were made. The stability was evaluated by the method “of the leaning slope”. It is proved that the slope is in a very stable state and requires the following measures: 1) unloading (truncation) of active heads blocks of landslide tiers) and the edge of the plateau, 2) regulation of the surface and groundwater flow, 3) concrete dam, if necessary.

Role of secondary phase particles in fatigue behavior of high-speed railway gearbox material

2020 ◽  
Vol 131 ◽  
pp. 105336 ◽  
Author(s):  
Yinan Jiao ◽  
Yifan Zhang ◽  
Shiqing Ma ◽  
Deli Sang ◽  
Yang Zhang ◽  
...  
Keyword(s):  
High Speed ◽  
Fatigue Behavior ◽  
Secondary Phase ◽  
High Speed Railway

scholarly journals Towards a Glass New World: The Role of Ion-Exchange in Modern Technology

2021 ◽  
Vol 11 (10) ◽  
pp. 4610
Author(s):  
Simone Berneschi ◽  
Giancarlo C. Righini ◽  
Stefano Pelli
Keyword(s):  
Ion Exchange ◽  
Communication Networks ◽  
High Speed ◽  
High Performance ◽  
Low Cost ◽  
Modern Technology ◽  
Historical Background ◽  
Wide Range ◽  
Happy Marriage

Glasses, in their different forms and compositions, have special properties that are not found in other materials. The combination of transparency and hardness at room temperature, combined with a suitable mechanical strength and excellent chemical durability, makes this material indispensable for many applications in different technological fields (as, for instance, the optical fibres which constitute the physical carrier for high-speed communication networks as well as the transducer for a wide range of high-performance sensors). For its part, ion-exchange from molten salts is a well-established, low-cost technology capable of modifying the chemical-physical properties of glass. The synergy between ion-exchange and glass has always been a happy marriage, from its ancient historical background for the realisation of wonderful artefacts, to the discovery of novel and fascinating solutions for modern technology (e.g., integrated optics). Getting inspiration from some hot topics related to the application context of this technique, the goal of this critical review is to show how ion-exchange in glass, far from being an obsolete process, can still have an important impact in everyday life, both at a merely commercial level as well as at that of frontier research.

The Role of Porous Media in Homogenization of High Pressure Diesel Fuel Spray Combustion

2013 ◽  
Vol 136 (1) ◽  
Author(s):  
Navid Shahangian ◽  
Damon Honnery ◽  
Jamil Ghojel
Keyword(s):  
High Pressure ◽  
Porous Media ◽  
High Speed ◽  
Fuel Spray ◽  
Compression Ignition Engines ◽  
System Pressure ◽  
Novel Approach ◽  
Air Mixing ◽  
The Media

Interest is growing in the benefits of homogeneous charge compression ignition engines. In this paper, we investigate a novel approach to the development of a homogenous charge-like environment through the use of porous media. The primary purpose of the media is to enhance the spread as well as the evaporation process of the high pressure fuel spray to achieve charge homogenization. In this paper, we show through high speed visualizations of both cold and hot spray events, how porous media interactions can give rise to greater fuel air mixing and what role system pressure and temperature plays in further enhancing this process.

Prediction of Ball Motion in High-Speed Thrust-Loaded Ball Bearings

1976 ◽  
Vol 98 (3) ◽  
pp. 463-469 ◽  
Author(s):  
C. R. Gentle ◽  
R. J. Boness
Keyword(s):  
Computer Program ◽  
High Speed ◽  
Ball Bearing ◽  
Viscoelastic Behavior ◽  
Specific Situation ◽  
Fluid Models ◽  
Ball Bearings ◽  
Theoretical Predictions ◽  
Ball Motion

This paper describes the development of a computer program used to analyze completely the motion of a ball in a high-speed, thrust-loaded ball bearing. Particular emphasis is paid to the role of the lubricant in governing the forces and moments acting on each ball. Expressions for these forces due to the rolling and sliding of the ball are derived in the light of the latest fluid models, and estimates are also made of the cage forces applicable in this specific situation. It is found that only when lubricant viscoelastic behavior is considered do the theoretical predictions agree with existing experimental evidence.

China's economy will struggle to halt secular slowdown

2021 ◽  
Keyword(s):  
High Speed ◽  
Regression To The Mean ◽  
Content Type ◽  
Strong Force ◽  
Global Demand ◽  
The Mean ◽  
Productivity Gains ◽  
Global Growth ◽  
China’S Economy

Significance Comparisons with two formerly fast-growing Asian neighbours, Japan and South Korea, suggest that China will continue to slow for another decade. Analysis of global growth trends over 50 years points to a strong force of ‘regression to the mean’, meaning that continued high-speed growth is statistically unlikely. Impacts Continued Chinese economic slowing will reduce global demand for resources such as iron ore and coal. Achieving productivity growth will require deepening reforms to increase the role of the market, the private sector and competition. World Bank economists emphasise that imposing stricter financial discipline is a key step to enhancing market-based productivity gains.

Sign in / Sign up

Export Citation Format

Share Document