Effect of the Size of Powder on the Microstructures and Grain Refining Performance of AlTiC Alloys

2010 ◽  
Vol 146-147 ◽  
pp. 887-890
Author(s):  
Jing Cao ◽  
Yong Feng Wang ◽  
Chun Xue Wei
Keyword(s):  
Grain Size ◽  
Grain Refining ◽  
Contact Reaction ◽  
X Ray Diffraction ◽  
Reaction Method ◽  
X Ray ◽  
Master Alloys ◽  
Refining Performance ◽  
Al3ti Particle

AlTiC master alloys have been prepared by Contact Reaction Method（CRM）.X-ray diffraction，SEM and EDS were used to analyses the AlTiC master alloys. It showed that morphology and distribution of TiC and Al3Ti particle have correspondingly changed with the change of the size of powder. As a result, the change in morphology and distribution of TiC and Al3Ti particle has considerably affected the gain refining performance of AlTiC master alloys. The result showed that: when the grain size of Ti is much smaller, the effect of refinement is much better.

Effect of Temperature on the Performance of AlTiC Metal Alloys

2011 ◽  
Vol 339 ◽  
pp. 291-294
Author(s):  
Yong Feng Wang ◽  
Rui Li
Keyword(s):  
Pure Aluminum ◽  
Metal Alloys ◽  
Effect Of Temperature ◽  
Grain Refining ◽  
X Ray Diffraction ◽  
X Ray ◽  
Commercially Pure ◽  
Master Alloys ◽  
Refining Performance ◽  
Al3ti Particle

AlTiC master alloys have been prepared by Contact Reaction Method（CRM）.X-ray diffraction，SEM and EDS were used to analyse the AlTiC master alloys. It showed that morphology and distribution of TiC and Al3Ti particle have correspondingly changed with the transformation of temperature. As a result, the change in morphology and distribution of TiC and Al3Ti particle has considerably affected the gain refining performance of AlTiC master alloys. The result showed that it had excellent grain refining performance for commercially pure aluminum in 800°C.

Research on a New Type Grain Refiner Refining α-Al by Adding Molten State and Diluted Al-Ti-B-RE Master Alloy

2012 ◽  
Vol 535-537 ◽  
pp. 915-918
Author(s):  
Zheng Jun Wang
Keyword(s):  
Master Alloy ◽  
Second Phase ◽  
Grain Refining ◽  
X Ray Diffraction ◽  
Grain Refiner ◽  
X Ray ◽  
Second Phase Particles ◽  
Refining Performance ◽  
New Type ◽  
The Cost

Al-Ti-B-RE master alloy was prepared by casting of pure Ti. To improve the quality and reduce the cost of α- Al, the Al-Ti-B-RE master alloy was added to α-Al in molten and diluted state. The refining method had the advantages of shorter contact time and better refining effect. The array of the second phase particles was separated and the nucleating rate was greatly increased. Analysis and comparison of the refining effects were by X-ray diffraction (XRD), scanning electron microscopy (SEM) and optical microscopy (OM).The refining experiment showed that the molten and diluted state Al-Ti-B-RE by oneself had better grain refining performance and had obvious advantages over Al-Ti-B in domestic.

scholarly journals Preparation of high-entropy carbides by different sintering techniques

2021 ◽  
Vol 56 (19) ◽  
pp. 11237-11247 ◽  
Author(s):  
Johannes Pötschke ◽  
Manisha Dahal ◽  
Mathias Herrmann ◽  
Anne Vornberger ◽  
Björn Matthey ◽  
...  
Keyword(s):  
Grain Size ◽  
Single Phase ◽  
X Ray Diffraction ◽  
Vacuum Sintering ◽  
X Ray ◽  
High Entropy ◽  
Mean Grain Size ◽  
The Mean ◽  
Gas Pressure Sintering ◽  
Hardness Values

AbstractDense (Hf, Ta, Nb, Ti, V)C- and (Ta, Nb, Ti, V, W)C-based high-entropy carbides (HEC) were produced by three different sintering techniques: gas pressure sintering/sinter–HIP at 1900 °C and 100 bar Ar, vacuum sintering at 2250 °C and 0.001 bar as well as SPS/FAST at 2000 °C and 60 MPa pressure. The relative density varied from 97.9 to 100%, with SPS producing 100% dense samples with both compositions. Grain size measurements showed that the substitution of Hf with W leads to an increase in the mean grain size of 5–10 times the size of the (Hf, Ta, Nb, Ti, V,)C samples. Vacuum-sintered samples showed uniform grain size distribution regardless of composition. EDS mapping revealed the formation of a solid solution with no intermetallic phases or element clustering. X-ray diffraction analysis showed the structure of mostly single-phase cubic high-entropy carbides. Hardness measurements revealed that (Hf, Ta, Nb, Ti, V)C samples possess higher hardness values than (Ta, Nb, Ti, V, W)C samples.

scholarly journals X-ray diffraction analysis of kaolin M1 and M2 via the Williamson–Hall and Warren–Averbach methods

2021 ◽  
pp. 174751982098472
Author(s):  
Lalmi Khier ◽  
Lakel Abdelghani ◽  
Belahssen Okba ◽  
Djamel Maouche ◽  
Lakel Said
Keyword(s):  
Grain Size ◽  
High Temperature ◽  
Low Temperature ◽  
Diffraction Analysis ◽  
Mechanical Resistance ◽  
X Ray Diffraction ◽  
Integral Breadth ◽  
X Ray ◽  
Mullite Phase

Kaolin M1 and M2 studied by X-ray diffraction focus on the mullite phase, which is the main phase present in both products. The Williamson–Hall and Warren–Averbach methods for determining the crystallite size and microstrains of integral breadth β are calculated by the FullProf program. The integral breadth ( β) is a mixture resulting from the microstrains and size effect, so this should be taken into account during the calculation. The Williamson–Hall chart determines whether the sample is affected by grain size or microstrain. It appears very clearly that the principal phase of the various sintered kaolins, mullite, is free from internal microstrains. It is the case of the mixtures fritted at low temperature (1200 °C) during 1 h and also the case of the mixtures of the type chamotte cooks with 1350 °C during very long times (several weeks). This result is very significant as it gives an element of explanation to a very significant quality of mullite: its mechanical resistance during uses at high temperature remains.

scholarly journals New Zn3Mg-xY Alloys: Characteristics, Microstructural Evolution and Corrosion Behavior

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2505
Author(s):  
Catalin Panaghie ◽  
Ramona Cimpoeșu ◽  
Bogdan Istrate ◽  
Nicanor Cimpoeșu ◽  
Mihai-Adrian Bernevig ◽  
...  
Keyword(s):  
Galvanic Corrosion ◽  
Intermetallic Phase ◽  
Young Modulus ◽  
Induction Melting ◽  
X Ray Diffraction ◽  
Medical Field ◽  
Pure Zinc ◽  
X Ray ◽  
Knowing That ◽  
Master Alloys

Zinc biodegradable alloys attracted an increased interest in the last few years in the medical field among Mg and Fe-based materials. Knowing that the Mg element has a strengthening influence on Zn alloys, we analyze the effect of the third element, namely, Y with expected results in mechanical properties improvement. Ternary ZnMgY samples were obtained through induction melting in Argon atmosphere from high purity (Zn, Mg, and Y) materials and MgY (70/30 wt%) master alloys with different percentages of Y and keeping the same percentage of Mg (3 wt%). The corrosion resistance and microhardness of ZnMgY alloys were compared with those of pure Zn and ZnMg binary alloy. Materials were characterized using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), linear and cyclic potentiometry, and immersion tests. All samples present generalized corrosion after immersion and electro-corrosion experiments in Dulbecco solution. The experimental results show an increase in microhardness and indentation Young Modulus following the addition of Y. The formation of YZn12 intermetallic phase elements with a more noble potential than pure Zinc is established. A correlation is obtained between the appearance of new Y phases and aggressive galvanic corrosion.

Fabrication of 239/238Pu-Zirconolite Ceramic Pellets by Natural Sintering

2003 ◽  
Vol 807 ◽  
Author(s):  
T. Advocat ◽  
F. Jorion ◽  
T. Marcillat ◽  
G. Leturcq ◽  
X. Deschanels ◽  
...  
Keyword(s):  
Grain Size ◽  
Radioactive Waste ◽  
Nuclear Waste ◽  
Chemical Stability ◽  
Minor Actinides ◽  
Loading Capacity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Physical And Chemical ◽  
Inorganic Matrix

ABSTRACTZirconolite is a potential inorganic matrix that is currently investigated in France, in the framework of the 1991 radioactive waste management law, with a view to provide durable containment of the trivalent and tetravalent minor actinides like neptunium, curium, americium and small quantities of unrecyclable plutonium separated from other nuclear waste. To confirm the actinide loading capacity of the zirconolite calcium site and to study the physical and chemical stability of this type of ceramic when subjected to alpha self-irradiation, zirconolite ceramic pellets were fabricated with 10 wt% plutonium oxide (isotope 239 or 238). The 55 pellets are dense (> 93.3% of the theoretical density on average) and free of cracks. They are characterized by a grain size of between 10 and 20 micrometers. X-ray diffraction analyses confirmed the presence of the zirconolite 2M crystalline structure.

Nanocrystalline Solutions as Precursors to The Spray Deposition of Cdte Thin Films

1995 ◽  
Vol 382 ◽  
Author(s):  
Martin Pehnt ◽  
Douglas L. Schulz ◽  
Calvin J. Curtis ◽  
Helio R. Moutinho ◽  
Amy Swartzlander ◽  
...  
Keyword(s):  
Thin Films ◽  
Atomic Force Microscopy ◽  
Grain Size ◽  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Cdte Nanoparticles ◽  
Atomic Force ◽  
Vis Spectroscopy ◽  
Cdte Thin Films

ABSTRACTIn this article we report the first nanoparticle-derived route to smooth, dense, phase-pure CdTe thin films. Capped CdTe nanoparticles were prepared by injection of a mixture of Cd(CH3)2, (n-C8H17)3 PTe and (n-C8H17)3P into (n-C8H17)3PO at elevated temperatures. The resultant nanoparticles 32-45 Å in diameter were characterized by x-ray diffraction, UV-Vis spectroscopy, transmission electron microscopy, thermogravimetric analysis and energy dispersive x-ray spectroscopy. CdTe thin film deposition was accomplished by dissolving CdTe nanoparticles in butanol and then spraying the solution onto SnO2-coated glass substrates at variable susceptor temperatures. Smooth and dense CdTe thin films were obtained using growth temperatures approximately 200 °C less than conventional spray pyrolysis approaches. CdTe films were characterized by x-ray diffraction, UV-Vis spectroscopy, atomic force microscopy, and Auger electron spectroscopy. An increase in crystallinity and average grain size as determined by x-ray diffraction was noted as growth temperature was increased from 240 to 300 °C. This temperature dependence of film grain size was further confirmed by atomic force microscopy with no remnant nanocrystalline morphological features detected. UV-Vis characterization of the CdTe thin films revealed a gradual decrease of the band gap (i.e., elimination of nanocrystalline CdTe phase) as the growth temperature was increased with bulk CdTe optical properties observed for films grown at 300 °C.

Effect of Nitridation Magnetic Properties of Nanocrystalline Fe-Co Alloy Powders

2010 ◽  
Vol 654-656 ◽  
pp. 1106-1109
Author(s):  
Ya Qiong He ◽  
Chang Hui Mao ◽  
Jian Yang
Keyword(s):  
Grain Size ◽  
Magnetic Properties ◽  
Alloy Powder ◽  
High Energy ◽  
X Ray Diffraction ◽  
Powder Mixtures ◽  
X Ray ◽  
Transmission Electron ◽  
Nitridation Temperature ◽  
Microstructure And Magnetic Properties

Nanocrystalline Fe-Co alloy powders, which were prepared by high-energy mechanical milling, were nitrided under the mixing gas of NH3/H2 in the temperature range from 380°C to 510°C. X-ray diffraction (XRD) was used to analyze the grain size and reaction during the processing. The magnetic properties of the nitrided powders were measured by Vibrating Sample Magnetometer (VSM). The results show that with the appearance of Fe4N phase after nitride treatment, and the grain-size of FeCo phase decreases with the increase of nitridation temperature between 380°C to 450°C.The saturation magnetization of nitrided alloy powder treated at 480°C is about 18% higher than that of the initial Fe-Co alloy powder, accompanied by the reduction of the coercivity. Transmission electron microscope (TEM) was used, attempting to further analyze the effect of Fe4N phase on microstructure and magnetic properties of the powder mixtures.

Structural and thermodynamic properties of nanocrystalline fcc metals prepared by mechanical attrition

1992 ◽  
Vol 7 (7) ◽  
pp. 1751-1761 ◽  
Author(s):  
J. Eckert ◽  
J.C. Holzer ◽  
C.E. Krill ◽  
W.L. Johnson
Keyword(s):  
Thermal Analysis ◽  
Grain Size ◽  
Melting Point ◽  
Grain Boundary ◽  
Bulk Modulus ◽  
Atomic Level ◽  
X Ray Diffraction ◽  
X Ray ◽  
Fcc Metals ◽  
Mechanical Attrition

Nanocrystalline fcc metals have been synthesized by mechanical attrition. The crystal refinement and the development of the microstructure have been investigated in detail by x-ray diffraction, differential scanning calorimetry, and transmission electron microscopy. The deformation process causes a decrease of the grain size of the fcc metals to 6–22 nm for the different elements. The final grain size scales with the melting point and the bulk modulus of the respective metal: the higher the melting point and the bulk modulus, the smaller the final grain size of the powder. Thus, the ultimate grain size achievable by this technique is determined by the competition between the heavy mechanical deformation introduced during milling and the recovery behavior of the metal. X-ray diffraction and thermal analysis of the nanocrystalline powders reveal that the crystal size refinement is accompanied by an increase in atomic-level strain and in the mechanically stored enthalpy in comparison to the undeformed state. The excess stored enthalpies of 10–40% of the heat of fusion exceed by far the values known for conventional deformation processes. The contributions of the atomic-level strain and the excess enthalpy of the grain boundaries to the stored enthalpies are critically assessed. The kinetics of grain growth in the nanocrystalline fcc metals are investigated by thermal analysis. The activation energy for grain boundary migration is derived from a modified Kissinger analysis, and estimates of the grain boundary enthalpy are given.

Magnetic Properties of Sputtered Fe-O and Co-O Thin Films

1995 ◽  
Vol 403 ◽  
Author(s):  
D. V. Dimitrov ◽  
A. S. Murthy ◽  
G. C. Hadjipanayis ◽  
C. P. SWANN
Keyword(s):  
Grain Size ◽  
Low Temperatures ◽  
Room Temperature ◽  
Oxide Films ◽  
X Ray Diffraction ◽  
Dc Magnetron Sputtering ◽  
Large Shift ◽  
X Ray ◽  
Grain Size And Shape ◽  
Spherical Grains

AbstractFe-O and Co-O films were prepared by DC magnetron sputtering in a mixture of Ar and O2 gases. By varying the oxygen to argon ratio, oxide films with stoichiometry FeO, Fe3O4, α-Fe2O3, CoO and Co3O4 were produced. TEM studies showed that the Fe – oxide films were polycrystalline consisting of small almost spherical grains, about 10 nm in size. Co-O films had different microstructure with grain size and shape dependent on the amount of oxygen. X-ray diffraction studies showed that the grains in Fe-O films were randomly oriented in contrast to Co-O films in which a <111> texture was observed. Pure FeO and α-Fe2O3 films were found to be superparamagnetic at room temperature but strongly ferromagnetic at low temperatures in contrast to the antiferromagnetic nature of bulk samples. A very large shift in the hysteresis loop, about 3800 Oe, was observed in field cooled Co-CoO films indicating the presence of a large unidirectional exchange anisotropy.

Sign in / Sign up

Export Citation Format

Share Document