Preparation of Phase Change Building Materials

2010 ◽  
Vol 96 ◽  
pp. 161-164
Author(s):  
Hai Jian Li ◽  
Zhi Jiang Ji ◽  
Zhi Jun Xin ◽  
Jing Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Phase Change ◽  
Building Materials ◽  
Phase Change Materials ◽  
Absorption Method ◽  
Scanning Calorimetry ◽  
Steady Temperature ◽  
Scanning Electron ◽  
High Latent Heat

The types and characteristics of phase change materials were discussed. With respect to application in building materials, the PCM should have more attractive properties including high latent heat values, stability and proper melting point, inflammability, corrosiveness and supercooling. Phase change building material (PCBM) was prepared using vacuum absorption method and tested by means of Differential Scanning Calorimetry(DSC) and Scanning Electron Microscopy(SEM). The testing results have shown that organic PCM was absorbed into the holes of inorganic carriers completely and distributed evenly with stable performances. It is concluded that the composite PCM has steady temperature-adjusting function and the preparation means is acceptable.

Thermal Properties and Morphology of Electrospun PEG/PVP Composite Fibers as Novel Phase Change Materials

2012 ◽  
Vol 204-208 ◽  
pp. 3998-4001
Author(s):  
Qi Song Shi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Thermal Properties ◽  
Phase Change ◽  
Phase Change Materials ◽  
Composite Fibers ◽  
Scanning Calorimetry ◽  
Ultrafine Fibers ◽  
Scanning Electron

The ultrafine fibers based on the composites of polyethylene glycol(PEG) and polyvinylpyrrolidone(PVP) were prepared successfully via electrospinning as phase change materials. The thermal properties and morphology of the composite fibers were studied by differential scanning calorimetry(DSC) and scanning electron microscopy(SEM), respectively.

Scanning electron microscopy of asbestos-containing material where the asbestos fibers are considered locked in a binder

1993 ◽  
Vol 51 ◽  
pp. 472-473
Author(s):  
J. R. Millette ◽  
R. S. Brown
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Environmental Protection Agency ◽  
Building Materials ◽  
The United States ◽  
Protection Agency ◽  
Asbestos Fibers ◽  
Different Types ◽  
Binder Material ◽  
Scanning Electron

The United States Environmental Protection Agency (EPA) has labeled as “friable” those building materials that are likely to readily release fibers. Friable materials when dry, can easily be crumbled, pulverized, or reduced to powder using hand pressure. Other asbestos containing building materials (ACBM) where the asbestos fibers are in a matrix of cement or bituminous or resinous binders are considered non-friable. However, when subjected to sanding, grinding, cutting or other forms of abrasion, these non-friable materials are to be treated as friable asbestos material. There has been a hypothesis that all raw asbestos fibers are encapsulated in solvents and binders and are not released as individual fibers if the material is cut or abraded. Examination of a number of different types of non-friable materials under the SEM show that after cutting or abrasion, tuffs or bundles of fibers are evident on the surfaces of the materials. When these tuffs or bundles are examined, they are shown to contain asbestos fibers which are free from binder material. These free fibers may be released into the air upon further cutting or abrasion.

scholarly journals pH-controlled synthesis of sustainable lauric acid/SiO2 phase change material for scalable thermal energy storage

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Shafiq Ishak ◽  
Soumen Mandal ◽  
Han-Seung Lee ◽  
Jitendra Kumar Singh
Keyword(s):  
Electron Microscopy ◽  
Phase Change ◽  
Lauric Acid ◽  
Photoelectron Spectroscopy ◽  
Phase Change Materials ◽  
Precursor Solution ◽  
Thermal Reliability ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Heating And Cooling

AbstractLauric acid (LA) has been recommended as economic, eco-friendly, and commercially viable materials to be used as phase change materials (PCMs). Nevertheless, there is lack of optimized parameters to produce microencapsulated PCMs with good performance. In this study, different amounts of LA have been chosen as core materials while tetraethyl orthosilicate (TEOS) as the precursor solution to form silicon dioxide (SiO2) shell. The pH of precursor solution was kept at 2.5 for all composition of microencapsulated LA. The synthesized microencapsulated LA/SiO2 has been characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), X-Ray photoelectron spectroscopy (XPS), Scanning electron microscopy (SEM), and Transmission electron microscopy (TEM). The SEM and TEM confirm the microencapsulation of LA with SiO2. Thermogravimetric analysis (TGA) revealed better thermal stability of microencapsulated LA/SiO2 compared to pure LA. PCM with 50% LA i.e. LAPC-6 exhibited the highest encapsulation efficiency (96.50%) and encapsulation ratio (96.15%) through Differential scanning calorimetry (DSC) as well as good thermal reliability even after 30th cycle of heating and cooling process.

Research on compatibility and surface of high impact bio-based polyamide

2021 ◽  
pp. 095400832110055
Author(s):  
Yang Wang ◽  
Yuhui Zhang ◽  
Yuhan Xu ◽  
Xiucai Liu ◽  
Weihong Guo
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Crystallization Behavior ◽  
High Impact ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Scanning Electron

The super-tough bio-based nylon was prepared by melt extrusion. In order to improve the compatibility between bio-based nylon and elastomer, the elastomer POE was grafted with maleic anhydride. Scanning Electron Microscopy (SEM) and Thermogravimetric Analysis (TGA) were used to study the compatibility and micro-distribution between super-tough bio-based nylon and toughened elastomers. The results of mechanical strength experiments show that the 20% content of POE-g-MAH has the best toughening effect. After toughening, the toughness of the super-tough nylon was significantly improved. The notched impact strength was 88 kJ/m2 increasing by 1700%, which was in line with the industrial super-tough nylon. X-ray Diffraction (XRD) and Differential Scanning Calorimetry (DSC) were used to study the crystallization behavior of bio-based PA56, and the effect of bio-based PA56 with high crystallinity on mechanical properties was analyzed from the microstructure.

scholarly journals Effect of the dispersion of the chromophore on the optical performances of polarizers from polyethylene and 5”-thio- (3-butyl)nonyl-2,2’:5’,2”-terthiophene

e-Polymers ◽  
2002 ◽  
Vol 2 (1) ◽  
Author(s):  
Andrea Pucci ◽  
Letizia Moretto ◽  
Giacomo Ruggeri ◽  
Francesco Ciardelli
Keyword(s):  
Electron Microscopy ◽  
Molecular Weight ◽  
Scanning Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Melting Point ◽  
Drawing Ratio ◽  
Scanning Calorimetry ◽  
Affine Deformation ◽  
Ultra High Molecular Weight ◽  
Scanning Electron

AbstractA new polyethylene-compatible terthiophene chromophore, 5”-thio-(3- butyl)nonyl-2,2’:5’,2”-terthiophene, with melting point lower than 0°C was prepared and used for linear polarizers based on ultra-high-molecular-weight polyethylene (UHMWPE). Differential scanning calorimetry and scanning electron microscopy indicate that the new chromophore is dispersed uniformly in films of UHMWPE obtained by casting from solution. The films show excellent dichroic properties (dichroic ratio 30) at rather low drawing ratio (≈ 20) . Moreover, qualitative agreement is observed with the Ward pseudo-affine deformation scheme.

Scanning Electron Microscopy Studies of Neoformations on Stony Materials of Modern Building Works

2013 ◽  
Vol 19 (5) ◽  
pp. 1241-1247 ◽  
Author(s):  
Carlos Alves
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Urban Areas ◽  
Building Materials ◽  
Microscopy Study ◽  
Cementitious Materials ◽  
Electron Microscopy Study ◽  
Weathering Processes ◽  
Central Portugal ◽  
Scanning Electron

AbstractThe built environment is subjected to several pollutants under variable environmental conditions defined by diverse geochemical systems. These geochemical systems promote the occurrence of neoformations that can have a detrimental effect on surfaces of the building materials. Hence, the study of neoformations helps in the understanding of weathering processes that affect built structures. In the present paper we present a scanning electron microscopy study of macroscopic manifestations of neoformations detected during an extensive visual survey of several modern architectural works in urban areas of northern and central Portugal. The studies performed suggest that cementitious materials play an important role as a source of pollutants for the most common neoformations such as carbonate rich stains and coatings, as well as salt efflorescences of alkaline sulphates and carbonates. There are also indications of contributions from organic sources for alkaline nitrates and atmospheric pollution for gypsum-rich black crusts. Other less common neoformations include phosphate aggregates and silica stains that represent interesting indicators of the geochemical systems in built environments. In the case of carbonate-rich coatings, indications of recurrence related to the circulation of carbonate forming solutions relevant to the maintenance of built surfaces were detected.

scholarly journals THE MICROSTRUCTURAL PROPERTIES OF PLASTER COMPOSITE PRODUCED DURING PRE-REPUBLIC AND EARLY REPUBLIC PERIODS IN DEMIRCI

2020 ◽  
Vol 4 (12) ◽  
pp. 8-12
Author(s):  
SadıkAlper Yıldızel
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Early Republic ◽  
Building Materials ◽  
Optical Microscope ◽  
Microstructural Properties ◽  
Micro Structure ◽  
Existing Structures ◽  
Composite Production ◽  
Scanning Electron

Structural plaster properties of the residence type buildings that were constructed during prerepublic and early republic periods in Demirci were investigated within the scope of this study. Samples taken from the existing structures were dried in laboratory conditions and made ready for micro-structure examination. Proper samples were examined with scanning electron microscopy (SEM) with the sensitivity of 5 nm and a magnification of 20.000 times, and the optical microscope (magnification: 250 x). In the light of obtained results, it has been determined that the microstructure of the composite used in the Demirci county in the preRepublican period and early republic period is similar to the resultant of mixes produced with the modern fiber added composite production technology. It is thought that this study will contribute to the study of the production of the related building materials to be improved in the future within the limits of the district.

Tensile and flammability characterizations of corn straw slagging/high-density polyethylene composites

2019 ◽  
Vol 33 (11) ◽  
pp. 1466-1477
Author(s):  
Qingfa Zhang ◽  
Wenyu Lu ◽  
Liang Zhou ◽  
Donghong Zhang ◽  
Hongzhen Cai ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Tensile Strength ◽  
Flame Retardant ◽  
High Density Polyethylene ◽  
Oxygen Index ◽  
High Density ◽  
Corn Straw ◽  
Scanning Calorimetry ◽  
Scanning Electron

Biocomposites were prepared with corn straw slagging (CSS) and high-density polyethylene (HDPE) at four loading levels (10, 20, 30, and 40 wt%) by extrusion method. CSS/HDPE composites were tested by tension, oxygen index meter, differential scanning calorimetry, X-ray diffraction, and the scanning electron microscopy. The scanning electron microscopy showed that CSS was dispersed uniformly in the HDPE matrix and strong interfacial interaction was achieved, which had an important influence on the tensile strength of the composites. The tensile strength of the composites could be improved with proper increase of CSS and reached maximum value at 30 wt% content. Furthermore, the addition of CSS played an important role in improving the flame-retardant ability of CSS/HDPE composites, and the limited oxygen index was 31.26% at 40 wt% content, good flame-retardant effect achieved.

Influence of Cementitious Capillary Crystalline Waterproofing Material on the Water Impermeability and Microstructure of Concrete

2019 ◽  
Vol 953 ◽  
pp. 209-214
Author(s):  
Yi Teng Zhang ◽  
Lian Zuo ◽  
Jin Chao Yang ◽  
Wei Xia Zhao ◽  
Xiang Xiong Zeng
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Cement Matrix ◽  
Hardened Cement ◽  
Hydration Products ◽  
Hardened Cement Paste ◽  
Scanning Calorimetry ◽  
Chinese Standard ◽  
Scanning Electron

The main objective of this study is to investigate the effect of cementitious capillary crystalline waterproofing (CCCW) material on the water impermeability and microstructure of concrete. The water impermeability of concrete covered with or without CCCW material was tested according to the Chinese standard GB 18445-2012. The results indicate that concretes coated with CCCW material showed much higher water impermeability than blank ones, and the ratio of water impermeability pressure between them reached 275. The samples obtained in various depths of hardened cement paste specimens with or without CCCW coating were analyzed through scanning electron microscopy (SEM) and thermogravimetry-differential scanning calorimetry (TG-DSC), to study the differences in microstructure and hydration products. The results present that after a 28-day standard curing, there were lots of ettringite crystals and CaCO3 formed in the paste in 1 cm from the coating, but the action depth of the CCCW coating could not reach 3 cm. The ettringite and CaCO3 is precipitated in the pore structure of cement matrix and filling the voids, which leads to the significant enhancement in water impermeability.

scholarly journals DESIGN AND DEVELOPMENT OF RILPIVIRINE NANOPARTICLE CONTAINING CHITOSAN USING IONIC GELATION METHOD FOR HIV INFECTIONS

2020 ◽  
pp. 113-118
Author(s):  
MONTUKUMAR PATEL ◽  
NIRAV V. PATEL ◽  
TEJAS B. PATEL
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
In Vitro Release ◽  
Amorphous State ◽  
Hiv Infections ◽  
Spherical Particles ◽  
Ionic Gelation ◽  
Scanning Calorimetry ◽  
Scanning Electron

Objective: The primary objective of the current research was to prepare rilpivirine loaded Nanoparticles containing Chitosan using the ionic gelation method for HIV infections. Methods: The nanoparticles of rilpivirine were prepared using the ionic gelation technique. Further, nanoparticles were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and in vitro drug release. Results: The optimized nanoparticles were found with a particle size of 130.30±5.29 nm (mean±SD) and entrapment efficiency (% EE) of 77.10±0.50%. Scanning electron microscopy technique exposed spherical particles with uniform size. It was observed that the nanoparticles created showed the absence of the crystalline nature of the drug and its switch to the amorphous state. Results showed that more than 45% of the pure drug is released in 50 min and after 90 min almost about 95% of the drug is released. Conclusion: The research study concluded that the in vitro release profile of nanoparticles was found to be sustained up to 24 hr. Sustained release of the rilpivirine could improve patient obedience to drug regimens, growing action effectiveness. 

Sign in / Sign up

Export Citation Format

Share Document