Production of Methyl Ester from Soybean Oil by Using Impregnated Mixed Domestic-Waste Catalysts

2020 ◽  
Vol 981 ◽  
pp. 215-221
Author(s):  
Siti Norhafiza Mohd Khazaai ◽  
Nurul Hajar Embong ◽  
Nurul Aina Nasriqah Ma’arof ◽  
Ab. Rahim Mohd Hasbi ◽  
Gaanty Pragas Maniam
Keyword(s):  
Methyl Ester ◽  
Soybean Oil ◽  
Calcium Oxide ◽  
Low Cost ◽  
Banana Peel ◽  
Oxide Content ◽  
Mass Ratio ◽  
Renewable Energy Resources ◽  
Domestic Waste ◽  
Ft Ir

Nowadays due to the depletion of non-renewable energy resources, production of green material from domestic wastes has played an important role. The waste of banana peel impregnated with calcium oxide (CaO) from eggshell had successfully been used as a low-cost catalyst to transesterify soybean oil to produce methyl ester. The catalytic actions from potassium and calcium oxide content in calcined banana peel (700 °C) and eggshell (900 °C) discover through FT-IR, XRD, and SEM. Production of methyl ester obtained at 82.29 wt. % with the optimal condition of 7 wt. % of catalyst amount, methanol/oil mass ratio, 9:1; and the reaction temperature, 65 °C within 2 h reaction time.

scholarly journals Mixed domestic-waste catalysts for methyl ester production of soybean oil

2019 ◽  
Vol 1 (2) ◽  
pp. 1-6
Author(s):  
Siti Norhafiza Mohd Khazaai ◽  
Nurul Aina Nasriqah Ma’arof ◽  
Nurul Hajar Embong ◽  
Mohd Hasbi Ab. Rahim ◽  
Gaanty Pragas Maniam
Keyword(s):  
Methyl Ester ◽  
Soybean Oil ◽  
Calcium Oxide ◽  
Low Cost ◽  
Banana Peel ◽  
Oxide Content ◽  
Mass Ratio ◽  
Renewable Energy Resources ◽  
Domestic Waste ◽  
Ft Ir

Nowadays due to the depletion of non-renewable energy resources, production of green material from domestic wastes has played an important role. The waste of banana peel impregnated with calcium oxide (CaO) from eggshell had successfully been used as a low-cost catalyst to transesterify soybean oil to produce methyl ester. The catalytic actions from potassium and calcium oxide content in calcined banana peel (700°C) and eggshell (900°C) discover through FT-IR, XRD, and SEM. Methyl ester conversion can be obtained at 76.87 wt.% with the optimal condition of 7 wt.% of catalyst amount, methanol/oil mass ratio, 9:1; and the reaction temperature, 65 °C within 2 h reaction time.

scholarly journals Fatty Acid Methyl Esters Production from Waste Catfish Fat (Pangasius Hypothalamus) Using Barnacle-Zno As A Catalyst

2018 ◽  
Vol 7 (3.11) ◽  
pp. 228
Author(s):  
Siti Norhafiza Mohd Khazaai ◽  
Nur Farah Wahida Abdul Wahid Baki ◽  
Gaanty Pragas Maniam ◽  
Mohd Hasbi Ab. Rahim
Keyword(s):  
Methyl Ester ◽  
Calcium Oxide ◽  
Fatty Acid Methyl Esters ◽  
Oxide Catalyst ◽  
Methyl Esters ◽  
Optimal Conditions ◽  
Mass Ratio ◽  
Acid Methyl ◽  
Milling Method

The abundance and diverse populations of Barnacle shells catching the intention as a source of calcium oxide catalyst to transesterify waste catfish fat into methyl ester. Calcium oxide supported with zinc oxide was prepared by ball milling method at 1:2 ratios, calcined for 3 h at 400 °C. The characterization of catalyst revealed both metals were well integrated into a bimetallic oxide. The optimal conditions were found to be: methanol/oil mass ratio, 10:1; catalyst amount, 11 wt% at the reaction temperature, 65 °C with 3 h of reaction time achieving 85.7% of methyl ester conversion. Both feedstock and catalyst from waste source have been successfully utilized to produce biodiesel.  

Preparation and Characterization of Soybean Oil-based Flame Retardant Rigid Polyurethane Foams Containing Phosphaphenanthrene Groups

2020 ◽  
Vol 17 (10) ◽  
pp. 760-771
Author(s):  
Qirui Gong ◽  
Niangui Wang ◽  
Kaibo Zhang ◽  
Shizhao Huang ◽  
Yuhan Wang
Keyword(s):  
Soybean Oil ◽  
Flame Retardant ◽  
Chemical Structure ◽  
Cell Structure ◽  
Polyurethane Foams ◽  
Limiting Oxygen Index ◽  
Rigid Polyurethane Foams ◽  
Degradation Activation Energy ◽  
Ft Ir

A phosphaphenanthrene groups containing soybean oil based polyol (DSBP) was synthesized by epoxidized soybean oil (ESO) and 9,10-dihydro-oxa-10-phosphaphenanthrene-10-oxide (DOPO). Soybean oil based polyol (HSBP) was synthesized by ESO and H2O. The chemical structure of DSBP and HSBP were characterized with FT-IR and 1H NMR. The corresponding rigid polyurethane foams (RPUFs) were prepared by mixing DSBP with HSBP. The results revealed apparent density and compression strength of RPUFs decreased with increasing the DSBP content. The cell structure of RPUFs was examined by scanning electron microscope (SEM) which displayed the cells as spherical or polyhedral. The thermal degradation and flame retardancy of RPUFs were investigated by thermogravimetric analysis, limiting oxygen index (LOI), and UL 94 vertical burning test. The degradation activation energy (Ea) of first degradation stage reduced from 80.05 kJ/mol to 37.84 kJ/mol with 80 wt% DSBP. The RUPF with 80 wt% DSBP achieved UL94 V-0 rating and LOI 28.3. The results showed that the flame retardant effect was mainly in both gas phase and condensed phase.

Competitive Biosorption of Pb(II) and Cu(II) by Functionalised Micropogonias undulates Scales

2020 ◽  
Vol 13 ◽  
Author(s):  
Joshua O. Ighalo ◽  
Ibrahim O. Tijani ◽  
Oluwaseun J. Ajala ◽  
Fisayo O. Ayandele ◽  
Omodele A. Eletta ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Low Cost ◽  
Fish Scales ◽  
Wet Impregnation ◽  
Monolayer Adsorption ◽  
Competitive Biosorption ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Best Fit

Background: Modified bio-based adsorbents from plant sources can be used for pollution remediation by adsorption due to their low cost and availability in large quantities. Objective: In this study, the competitive biosorption of Pb(II) and Cu(II) by Micropogonias undulates functionalised fish scales (FFS) was conducted. The functionalisation was done by wet impregnation with Fe2+. Method: The biosorbent was characterised by Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (SEM-EDS) and Branueur–Emmett–Teller (BET) analyses. Results: The major constituents in the FFS were calcium and phosphorus from the collagen and apatite on the scales. Optimum removal efficiency for both metals was >99% at 10 g/l dosage. It was observed that the Langmuir isotherm model and the pseudo second order kinetics model were the best fit for the experimental data. The monolayer adsorption capacity of FFS for Pb(II) and Cu(II) was observed to be 96.15 mg/g and 100 mg/g respectively. Conclusion: The study revealed that the competitive biosorption of heavy metals can be achieved (at a good adsorption capacity) using functionalised Micropogonias undulates fish scales.

scholarly journals Quantification and Classification of Diclofenac Sodium Content in Dispersed Commercially Available Tablets by Attenuated Total Reflection Infrared Spectroscopy and Multivariate Data Analysis

2021 ◽  
Vol 14 (5) ◽  
pp. 440
Author(s):  
Eirini Siozou ◽  
Vasilios Sakkas ◽  
Nikolaos Kourkoumelis
Keyword(s):  
Infrared Spectroscopy ◽  
Low Cost ◽  
Diclofenac Sodium ◽  
Reference Method ◽  
Sodium Content ◽  
Attenuated Total Reflection ◽  
Accuracy And Precision ◽  
Significant Difference ◽  
Ft Ir

A new methodology, based on Fourier transform infrared spectroscopy equipped with an attenuated total reflectance accessory (ATR FT-IR), was developed for the determination of diclofenac sodium (DS) in dispersed commercially available tablets using chemometric tools such as partial least squares (PLS) coupled with discriminant analysis (PLS-DA). The results of PLS-DA depicted a perfect classification of the tablets into three different groups based on their DS concentrations, while the developed model with PLS had a sufficiently low root mean square error (RMSE) for the prediction of the samples’ concentration (~5%) and therefore can be practically used for any tablet with an unknown concentration of DS. Comparison with ultraviolet/visible (UV/Vis) spectrophotometry as the reference method revealed no significant difference between the two methods. The proposed methodology exhibited satisfactory results in terms of both accuracy and precision while being rapid, simple and of low cost.

scholarly journals Multidimensional Ln-Aminophthalate Photoluminescent Coordination Polymers

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1786
Author(s):  
Carla Queirós ◽  
Chen Sun ◽  
Ana M. G. Silva ◽  
Baltazar de Castro ◽  
Juan Cabanillas-Gonzalez ◽  
...  
Keyword(s):  
Water Content ◽  
Coordination Polymers ◽  
Metal Ion ◽  
Low Cost ◽  
Microwave Assisted Synthesis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Wide Range ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

The development of straightforward reproducible methods for the preparation of new photoluminescent coordination polymers (CPs) is an important goal in luminescence and chemical sensing fields. Isophthalic acid derivatives have been reported for a wide range of applications, and in addition to their relatively low cost, have encouraged its use in the preparation of novel lanthanide-based coordination polymers (LnCPs). Considering that the photoluminescent properties of these CPs are highly dependent on the existence of water molecules in the crystal structure, our research efforts are now focused on the preparation of CP with the lowest water content possible, while considering a green chemistry approach. One- and two-dimensional (1D and 2D) LnCPs were prepared from 5-aminoisophthalic acid and Sm3+/Tb3+ using hydrothermal and/or microwave-assisted synthesis. The unprecedented LnCPs were characterized by single-crystal X-ray diffraction (SCRXD), powder X-ray diffraction (PXRD), Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM), and their photoluminescence (PL) properties were studied in the solid state, at room temperature, using the CPs as powders and encapsulated in poly(methyl methacrylate (PMMA) films, envisaging the potential preparation of devices for sensing. The materials revealed interesting PL properties that depend on the dimensionality, metal ion, co-ligand used and water content.

scholarly journals An Overview of Biodiesel Production via Calcium Oxide Based Catalysts: Current State and Perspective

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3950
Author(s):  
Hoora Mazaheri ◽  
Hwai Chyuan Ong ◽  
Zeynab Amini ◽  
Haji Hassan Masjuki ◽  
M. Mofijur ◽  
...  
Keyword(s):  
Heterogeneous Catalysis ◽  
Calcium Oxide ◽  
Heterogeneous Catalysts ◽  
Low Cost ◽  
Biodiesel Production ◽  
Catalyst Synthesis ◽  
Process Improvements ◽  
Current State ◽  
The Common ◽  
Activity Mechanism

Biodiesel is a clean, renewable, liquid fuel that can be used in existing diesel engines without modification as pure or blend. Transesterification (the primary process for biodiesel generation) via heterogeneous catalysis using low-cost waste feedstocks for catalyst synthesis improves the economics of biodiesel production. Heterogeneous catalysts are preferred for the industrial generation of biodiesel due to their robustness and low costs due to the easy separation and relatively higher reusability. Calcium oxides found in abundance in nature, e.g., in seashells and eggshells, are promising candidates for the synthesis of heterogeneous catalysts. However, process improvements are required to design productive calcium oxide-based catalysts at an industrial scale. The current work presents an overview of the biodiesel production advancements using calcium oxide-based catalysts (e.g., pure, supported, and mixed with metal oxides). The review discusses different factors involved in the synthesis of calcium oxide-based catalysts, and the effect of reaction parameters on the biodiesel yield of calcium oxide-based catalysis are studied. Further, the common reactor designs used for the heterogeneous catalysis using calcium oxide-based catalysts are explained. Moreover, the catalytic activity mechanism, challenges and prospects of the application of calcium oxide-based catalysts in biodiesel generation are discussed. The study of calcium oxide-based catalyst should continue to be evaluated for the potential of their application in the commercial sector as they remain the pivotal goal of these studies.

scholarly journals Removal of Chromium(III) and Cadmium(II) Heavy Metal Ions from Aqueous Solutions Using Treated Date Seeds: An Eco-Friendly Method

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3718
Author(s):  
Mohammad Azam ◽  
Saikh Mohammad Wabaidur ◽  
Mohammad Rizwan Khan ◽  
Saud I. Al-Resayes ◽  
Mohammad Shahidul Islam
Keyword(s):  
Metal Ions ◽  
Adsorption Capacity ◽  
Low Cost ◽  
Maximum Adsorption Capacity ◽  
Solution Ph ◽  
Surface Analysis Techniques ◽  
Adsorption Processes ◽  
Ft Ir ◽  
Metal Elution ◽  
Date Pits

The aim of the research was to prepare low-cost adsorbents, including raw date pits and chemically treated date pits, and to apply these materials to investigate the adsorption behavior of Cr(III) and Cd(II) ions from wastewater. The prepared materials were characterized using SEM, FT-IR and BET surface analysis techniques for investigating the surface morphology, particle size, pore size and surface functionalities of the materials. A series of adsorption processes was conducted in a batch system and optimized by investigating various parameters such as solution pH, contact time, initial metal concentrations and adsorbent dosage. The optimum pH for achieving maximum adsorption capacity was found to be approximately 7.8. The determination of metal ions was conducted using atomic adsorption spectrometry. The experimental results were fitted using isotherm Langmuir and Freundlich equations, and maximum monolayer adsorption capacities for Cr(III) and Cd(II) at 323 K were 1428.5 and 1302.0 mg/g (treated majdool date pits adsorbent) and 1228.5 and 1182.0 mg/g (treated sagai date pits adsorbent), respectively. It was found that the adsorption capacity of H2O2-treated date pits was higher than that of untreated DP. Recovery studies showed maximal metal elution with 0.1 M HCl for all the adsorbents. An 83.3–88.2% and 81.8–86.8% drop in Cr(III) and Cd(II) adsorption, respectively, were found after the five regeneration cycles. The results showed that the Langmuir model gave slightly better results than the Freundlich model for the untreated and treated date pits. Hence, the results demonstrated that the prepared materials could be a low-cost and eco-friendly choice for the remediation of Cr(III) and Cd(II) contaminants from an aqueous solution.

Preparation, Structure and Thermolysis Characteristics of Ammonia Borane

2016 ◽  
Vol 680 ◽  
pp. 529-533
Author(s):  
Jian Li Ma ◽  
Hai Yan Cao ◽  
Xiao Xia Zhang ◽  
Dong Chen
Keyword(s):  
Boric Acid ◽  
Storage System ◽  
Ammonia Borane ◽  
Mass Ratio ◽  
Hydrogen Storage System ◽  
Ammonia Complex ◽  
Ft Ir ◽  
Ammonia Source ◽  
Boron Source ◽  
Amino Complex

Ammonia borane (NH3BH3, AB) is an excellent source of hydrogen(19.6 wt %) for fuel cell applications. In this paper, pure ammonia borane is successfully prepared by using amino complex for ammonia complex Ag(NH3)2Cl as new ammonia source, and sodium borohydride (NaBH4) as boron source. The composition and constitution of the products are measured by XRD and FT-IR. The thermolysis of ammonia borane is significant for its practical application. Boric acid plays a role in improving ammonia borane hydrogen performance. The effects of different mass ratio of boric acid and ammonia borane on dehydrogenation are tested by XRD, TG/DTA and TPD-MS. The results show that boric acid can decrease the first level dehydrogenation temperature of ammonia borane decrease to about 85°C (working temperature of PEMFC). What’s more, the onset temperature of AB’s thermolysis can decrease to about 60°C when the mass ratio of ammonia borane and boric acid is equal to 3:1. This makes ammonia borane be more suitable for the application in on-board hydrogen storage system.

Sign in / Sign up

Export Citation Format

Share Document