Corrosion Inhibition of Brazing Cu-Ag Alloy with 1,2,3-Benzotriazole and 2,5-Dimercapto-1,3,4-Thiadiazole

CORROSION ◽  
10.5006/3642 ◽  
2020 ◽  
Author(s):  
Hooman Rahmani ◽  
Efstathios Meletis
Keyword(s):  
Adsorption Isotherm ◽  
Photoelectron Spectroscopy ◽  
Polarization Measurement ◽  
Protective Film ◽  
Xps Spectra ◽  
Anchoring Group ◽  
Azole Ring ◽  
Pure Cu ◽  
Temkin Adsorption Isotherm ◽  
Mixed Type Inhibitor

Adsorption and inhibition behavior of 1,2,3-benzotriazole (BTA) and 2,5-dimercapto-1,3,4-thiadiazole (DMTD) on brazing Cu-Ag alloy was studied in deionized water using potentiodynamic polarization measurement, adsorption isotherm investigation and X-ray photoelectron spectroscopy (XPS). Pure Ag and pure Cu were included to investigate the mere effect of each component on the alloy’s behavior. Results show better inhibition of DMTD for Ag and BTA for Cu, both by chemisorption. BTA was found to follow Langmuir isotherm while DMTD obeyed Temkin adsorption isotherm, despite both acting as a mixed type inhibitor. Combining the two inhibitors increased the inhibition efficiency over 80% for the Cu-Ag alloy. XPS spectra demonstrate the formation of DMTD protective film through DMTD’s functional groups of pyrrolic N from the azole ring and thiol S from the mercapto anchoring group on Ag and thiol S on Cu. Compared to BTA, the higher affinity of DMTD to Ag was attributed to the involvement of two heteroatoms with the Ag surface.

Psidium guajava Leaves as Corrosion Inhibitor of Al-6061

2021 ◽  
Vol 1045 ◽  
pp. 231-236
Author(s):  
Femiana Gapsari ◽  
Andita Ganda
Keyword(s):  
Adsorption Isotherm ◽  
Mixed Type ◽  
Electrochemical Measurement ◽  
Psidium Guajava ◽  
Aluminum Surface ◽  
Corrosion Characteristic ◽  
Polarization Test ◽  
Enthalpy And Entropy ◽  
Temkin Adsorption Isotherm ◽  
Mixed Type Inhibitor

The anti-corrosion characteristic of the extract of Psidiumguajava leaves on aluminum in 3.5 wt% sodium chloride were examined using electrochemical measurement. The thermodynamic factors such as the free energy adsorption, change in enthalpy, and entropy was also analyzed. The adsorption isotherm was detail described to study the adsorption of the inhibitor on the aluminum surface with various concentrations of the inhibitor. The electrochemical measurement was done through the potentiodynamic polarization test. The results show that the inhibitor act as the mixed type inhibitor and its adsorption on the aluminum surface obeys Temkin adsorption isotherm. The study suggests that the use of Psidium guajava leaves extract for the food industrial application is eco-friendly and safe, especially in salt solution medium.

scholarly journals Optical, XPS and XRD Studies of Semiconducting Copper Sulfide Layers on a Polyamide Film

2009 ◽  
Vol 2009 ◽  
pp. 1-8 ◽  
Author(s):  
Valentina Krylova ◽  
Mindaugas Andrulevičius
Keyword(s):  
Photoelectron Spectroscopy ◽  
Copper Sulfide ◽  
Diffusion Method ◽  
X Ray Diffraction ◽  
Xps Spectra ◽  
X Ray ◽  
Xrd Studies ◽  
Polyamide Film ◽  
Indirect Band Gap ◽  
Xrd Method

Copper sulfide layers were formed on polyamide PA 6 surface using the sorption-diffusion method. Polymer samples were immersed for 4 and 5 h in 0.15 mol⋅  solutions and acidified with HCl (0.1 mol⋅) at . After washing and drying, the samples were treated with Cu(I) salt solution. The samples were studied by UV/VIS, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) methods. All methods confirmed that on the surface of the polyamide film a layer of copper sulfide was formed. The copper sulfide layers are indirect band-gap semiconductors. The values of are 1.25 and 1.3 eV for 4 h and 5 h sulfured PA 6 respectively. Copper XPS spectra analyses showed Cu(I) bonds only in deeper layers of the formed film, while in sulfur XPS S 2p spectra dominating sulfide bonds were found after cleaning the surface with ions. It has been established by the XRD method that, beside , the layer contains as well. For PA 6 initially sulfured 4 h, grain size forchalcocite, , was  nm and fordjurleite, , it was 54.17 nm. The sheet resistance of the obtained layer varies from 6300 to 102 .

scholarly journals Effect of Temperature on the Corrosion Inhibition of Trans-4-Hydroxy-4′-Stilbazole on Mild Steel in HCl Solution

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Ayssar Nahlé ◽  
Ideisan I. Abu-Abdoun ◽  
Ibrahim Abdel-Rahman
Keyword(s):  
Weight Loss ◽  
Double Bond ◽  
Adsorption Isotherm ◽  
Mild Steel ◽  
Corrosion Inhibitor ◽  
Thermodynamic Parameters ◽  
The Other ◽  
Effect Of Temperature ◽  
Temkin Adsorption Isotherm ◽  
Hcl Solution

The inhibition and the effect of temperature and concentration of trans-4-hydroxy-4′-stilbazole on the corrosion of mild steel in 1 M HCl solution was investigated by weight loss experiments at temperatures ranging from 303 to 343 K. The studied inhibitor concentrations were between  M and  M. The percentage inhibition increased with the increase of the concentration of the inhibitor. The percentage inhibition reached about 94% at the concentration of  M and 303 K. On the other hand, the percentage inhibition decreased with the increase of temperature. Using the Temkin adsorption isotherm, the thermodynamic parameters for the adsorption of this inhibitor on the metal surface were calculated. Trans-4-hydroxy-4′-stilbazole was found to be a potential corrosion inhibitor since it contained not only nitrogen and oxygen, but also phenyl and pyridine rings that are joined together with a double bond (–C=C–) in conjugation with these rings.

scholarly journals An estimation on the mechanical stabilities of SAMs by low energy Ar+ cluster ion collision

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Y. Tong ◽  
G. R. Berdiyorov ◽  
A. Sinopoli ◽  
M. E. Madjet ◽  
V. A. Esaulov ◽  
...  
Keyword(s):  
Electron Irradiation ◽  
Photoelectron Spectroscopy ◽  
Density Functional ◽  
Crystal Surface ◽  
Depth Profiling ◽  
Low Energy ◽  
Cross Linking ◽  
Xps Spectra ◽  
Self Assembled ◽  
The Stability

AbstractThe stability of the molecular self-assembled monolayers (SAMs) is of vital importance to the performance of the molecular electronics and their integration to the future electronics devices. Here we study the effect of electron irradiation-induced cross-linking on the stability of self-assembled monolayer of aromatic 5,5′-bis(mercaptomethyl)-2,2′-bipyridine [BPD; HS-CH2-(C5H3N)2-CH2-SH] on Au (111) single crystal surface. As a refence, we also study the properties of SAMs of electron saturated 1-dodecanethiol [C12; CH3-(CH2)11-SH] molecules. The stability of the considered SAMs before and after electron-irradiation is studied using low energy Ar+ cluster depth profiling monitored by recording the X-ray photoelectron spectroscopy (XPS) core level spectra and the UV-photoelectron spectroscopy (UPS) in the valance band range. The results indicate a stronger mechanical stability of BPD SAMs than the C12 SAMs. The stability of BPD SAMs enhances further after electron irradiation due to intermolecular cross-linking, whereas the electron irradiation results in deterioration of C12 molecules due to the saturated nature of the molecules. The depth profiling time of the cross-linked BPD SAM is more than 4 and 8 times longer than the profiling time obtained for pristine and BPD and C12 SAMs, respectively. The UPS results are supported by density functional theory calculations, which show qualitative agreement with the experiment and enable us to interpret the features in the XPS spectra during the etching process for structural characterization. The obtained results offer helpful options to estimate the structural stability of SAMs which is a key factor for the fabrication of molecular devices.

Anti-Corrosive Effect of Jordanian-Bay- Leaves Aqueous Extract on Mild Steel in 1.0 M Hydrochloric Acid Solution

2021 ◽  
Vol 17 ◽  
pp. 614-618
Author(s):  
Nawal H. Bahtiti ◽  
Ibrahim Abdel-Rahaman
Keyword(s):  
Hydrochloric Acid ◽  
Adsorption Isotherm ◽  
Aqueous Extract ◽  
Corrosion Inhibitors ◽  
Polarization Technique ◽  
Corrosive Effect ◽  
The Impact ◽  
Natural Inhibitors ◽  
Temkin Adsorption Isotherm ◽  
Hcl Solution

Natural inhibitors are the most crucial manner to lessen the corrosion price of various business metals. There are several strategies being used with corrosion inhibitors. One technique being used is the Electrochemical strategies. The gain with this technique is their brief size time and mechanistic information. It is beneficial in the corrosion's layout safety techniques besides the layout of the brand new inhibitors, there are 3 styles of corrosion inhibitors as anodic inhibitors, cathodic inhibitors, over one inhibitor. The corrosion inhibition of slight metallic in 1.0 M HCl solution with the aid of using Jordanian -Bay- leaves extract has been studied with the use of potentiodynamic polarization technique. Results received a display that Bay- leaves aqueous extract behaves as an anodic inhibitor for slight metallic in 1.0 M HCl solution. The inhibitor capabilities thru adsorption following Temkin adsorption isotherm. The impact of parameters like temperature and inhibitor awareness at the corrosion of slight metallic has additionally been studied.

29Si NMR and XPS Investigation of the Structure of Silicon Oxycarbide Glasses Derived from Polysiloxane Precursors

1994 ◽  
Vol 346 ◽  
Author(s):  
R.J.P. Corriu ◽  
D. Leclercq ◽  
P.H. Mutin ◽  
A. Vioux
Keyword(s):  
Solid State ◽  
Photoelectron Spectroscopy ◽  
Solid State Nmr ◽  
Random Distribution ◽  
Silicon Oxycarbide ◽  
29Si Nmr ◽  
Xps Spectra ◽  
Excess Carbon ◽  
X Ray ◽  
Silicon Oxycarbide Glasses

ABSTRACTTwo silicon oxycarbide glasses with different compositions (O/Si ratio 1.2 and 1.8) were prepared by pyrolysis at moderate temperature (900 °C) of polysiloxane precursors. Their structure was investigated using quantitative 29Si solid-state NMR and X-ray photoelectron spectroscopy (XPS). The environment of the silicon atoms in the oxycarbide phase corresponded to a purely random distribution of Si-O and Si-C bonds depending on the O/Si ratio of the glass only and not on the structure of the precursors. At the light of the NMR results, the Si2p XPS spectra of the glasses may be interpreted using the contribution of the five possible SiOxC4-x tetrahedra. The Cls spectra of these glasses indicated the presence of oxycarbide carbon in CSi4 tetrahedra, similar to carbide carbon, and graphitic-like excess carbon.

Preparation and Characterization of Ni2+-Montmorillonite/Polyvinyl Alcohol Water-Soluble Nanocomposite Film

2005 ◽  
Vol 13 (8) ◽  
pp. 839-846 ◽  
Author(s):  
Li-Ping Wang ◽  
Yun-Pu Wang ◽  
Fa-Ai Zhang
Keyword(s):  
Polyvinyl Alcohol ◽  
Photoelectron Spectroscopy ◽  
Thermal Characteristics ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
Xps Spectra ◽  
X Ray ◽  
Alcohol Water ◽  
Ft Ir ◽  
Silicate Layers

A new type of nano-composite film was prepared from polyvinyl alcohol, Ni2+-montmorillonite (Ni2+-MMT), defoamer, a levelling agent and a plasticizer. Its thermal characteristics were studied by Differential Scanning Calorimetry (DSC). The intermolecular interactions were measured by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS), and the tensile strength (TS) and elongation at break (%E) were measured. The microstructures were studied by X-ray diffraction (XRD) and atomic force microscopy (AFM). FT-IR and XPS spectra indicated that cross-linking has taken place between PVA and Ni2+-MMT. XRD and AFM indicate that the PVA molecules had inserted themselves into the silicate layers of MMT, exfoliating them and dispersing them randomly into the PVA matrix. Compared to pure PVA film, the TS of the films was increased and %E decreased when the Ni2+-Montmorillonite was added and the dissolution temperature of the film was also reduced.

scholarly journals Magnetic Properties and the Electronic Structure of the Gd0.4Tb0.6Co2 Compound

Materials ◽  
2020 ◽  
Vol 13 (23) ◽  
pp. 5481
Author(s):  
Marcin Sikora ◽  
Anna Bajorek ◽  
Artur Chrobak ◽  
Józef Deniszczyk ◽  
Grzegorz Ziółkowski ◽  
...  
Keyword(s):  
Electronic Structure ◽  
Ab Initio Calculations ◽  
Ab Initio ◽  
Photoelectron Spectroscopy ◽  
Density Functional ◽  
Magnetic Measurements ◽  
Plane Waves ◽  
Full Potential ◽  
Theory Approach ◽  
Xps Spectra

We report on the comprehensive experimental and theoretical studies of magnetic and electronic structural properties of the Gd0.4Tb0.6Co2 compound crystallization in the cubic Laves phase (C15). We present new results and compare them to those reported earlier. The magnetic study was completed with electronic structure investigations. Based on magnetic isotherms, magnetic entropy change (ΔSM) was determined for many values of the magnetic field change (Δμ0H), which varied from 0.1 to 7 T. In each case, the ΔSM had a maximum around room temperature. The analysis of Arrott plots supplemented by a study of temperature dependency of Landau coefficients revealed that the compound undergoes a magnetic phase transition of the second type. From the M(T) dependency, the exchange integrals between rare-earth R-R (JRR), R-Co (JRCo), and Co-Co (JCoCo) atoms were evaluated within the mean-field theory approach. The electronic structure was determined using the X-ray photoelectron spectroscopy (XPS) method as well as by calculations using the density functional theory (DFT) based Full Potential Linearized Augmented Plane Waves (FP-LAPW) method. The comparison of results of ab initio calculations with the experimental data indicates that near TC the XPS spectrum collects excitations of electrons from Co3d states with different values of exchange splitting. The values of the magnetic moment on Co atoms determined from magnetic measurements, estimated from the XPS spectra, and results from ab initio calculations are quantitatively consistent.

scholarly journals Following excited-state chemical shifts in molecular ultrafast x-ray photoelectron spectroscopy

2022 ◽  
Vol 13 (1) ◽  
Author(s):  
D. Mayer ◽  
F. Lever ◽  
D. Picconi ◽  
J. Metje ◽  
S. Alisauskas ◽  
...  
Keyword(s):  
Excited State ◽  
Chemical Shift ◽  
Photoelectron Spectroscopy ◽  
Chemical Shifts ◽  
Excited Molecule ◽  
Charge Motion ◽  
Core Electron ◽  
Xps Spectra ◽  
X Ray ◽  
State Chemical

AbstractThe conversion of photon energy into other energetic forms in molecules is accompanied by charge moving on ultrafast timescales. We directly observe the charge motion at a specific site in an electronically excited molecule using time-resolved x-ray photoelectron spectroscopy (TR-XPS). We extend the concept of static chemical shift from conventional XPS by the excited-state chemical shift (ESCS), which is connected to the charge in the framework of a potential model. This allows us to invert TR-XPS spectra to the dynamic charge at a specific atom. We demonstrate the power of TR-XPS by using sulphur 2p-core-electron-emission probing to study the UV-excited dynamics of 2-thiouracil. The method allows us to discover that a major part of the population relaxes to the molecular ground state within 220–250 fs. In addition, a 250-fs oscillation, visible in the kinetic energy of the TR-XPS, reveals a coherent exchange of population among electronic states.

X-ray photoelectron spectroscopy characterization of barium titanate ceramics prepared by the citric route. Residual carbon study

1997 ◽  
Vol 12 (9) ◽  
pp. 2388-2392 ◽  
Author(s):  
C. Miot ◽  
E. Husson ◽  
C. Proust ◽  
R. Erre ◽  
J. P. Coutures
Keyword(s):  
Barium Titanate ◽  
Single Crystals ◽  
Photoelectron Spectroscopy ◽  
Residual Carbon ◽  
Ion Etching ◽  
Xps Spectra ◽  
X Ray ◽  
Titanate Ceramics

Powder and ceramics of barium titanate prepared by the citric process were studied by x-ray photoelectron spectroscopy (XPS). Spectra of C1s, O1s, Ti2p, Ba3d, and Ba4d levels are analyzed in powder and ceramics immediately after the sintering step and after several months of exposure in the air. Ar-ion etching allowed one to characterize the material intrinsic carbon. The results are discussed in comparison with works previously published on oxide single crystals.

Sign in / Sign up

Export Citation Format

Share Document