The effect of anisotropic vesiculation on the porous-permeable evolution in magmatic foams

2021 ◽  
Author(s):  
Jenny Schauroth ◽  
Joshua Weaver ◽  
Jackie E. Kendrick ◽  
Anthony Lamur ◽  
Yan Lavallée
Keyword(s):  
Percolation Threshold ◽  
Gas Flow ◽  
Gas Permeability ◽  
Dominant Mode ◽  
Porous Network ◽  
Near Surface ◽  
Shape Distribution ◽  
Aspect Ratios ◽  
Anisotropic Expansion ◽  
The Impact

<p>Volcanoes can undergo rapid transitions between effusive and explosive eruptions that are often dependant on the melt’s ability to devolatilise and outgas. Eruptive products show widely contrasting permeability values for a given porosity owing to the fact that magma properties evolve over time and space, hence porosity and permeability vary depending on transport and deformation history, scale and orientation. The vesicularity that enables bubble coalescence and permeability development, termed the percolation threshold, is experimentally determined to be at ~30-80 %, depending on the microstructure of magma (i.e. bubble size and shape distribution, crystal content, dominant mode of rheological deformation during vesiculation and flow). During ascent of magma pressure decreases and the magma adapts to these new conditions by vesiculating and expanding against wall rocks. Friction between the vesicular magma and the conduit wall encourages shear, which modifies the architecture of the vesicular network. The geometrical constriction associated with conduits, dykes or fractures which host magma thus prevents or limits the isotropic growth of vesicles; we hypothesise that geometrical constraints instead lead to different ratios of isotropic to anisotropic expansion, which impacts vesicle coalescence and the onset and development of permeable gas flow in magma. We present experimental results detailing the impact of constricting geometry on the development of a permeable porous network, by combining various diameter basalt crucibles with different sized cylindrical cores of aphyric rhyolitic glass (0.12 wt.% H<sub>2</sub>O). We vesiculate the samples in a furnace at 1009 °C for different isothermal dwell increments, before cooling our sample assembly and determining porosity, strain and gas permeability. The vesiculated rhyolites host an impervious glass rind (due to near-surface bubble resorption via diffusion) surrounding a vesicular core; as such, we measure gas permeability of the assembly after cutting the upper and lower glassy rind, to expose the permeability of the internal porous network developed experimentally. The findings indicate that increasing anisotropy, caused by minimising the extent of isotropic vesiculation and maximising vesiculation under constricted conditions, lowers the porosity at which the percolation threshold occurs by ~30 %. We postulate that pure and simple shear, developed parallel to the constricting walls, increase bubble aspect ratios and enhance coalescence. This suggests magmatic foams form connected networks at lower porosities when they vesiculate in constricted conduits, dykes and fractures, thus impacting outgassing efficiency. This implies that the physico-chemical evolution of vesiculating magma may be more strongly linked to structural and rheological controls than previously anticipated, with important implications on ascending magma evolution and eruptive processes, such as degassing, outgassing and fragmentation.</p>

scholarly journals Gas Permeability of Salt Crusts Formed by Evaporation from Porous Media

Geosciences ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 423 ◽  
Author(s):  
Joseph Piotrowski ◽  
Johan Alexander Huisman ◽  
Uri Nachshon ◽  
Andreas Pohlmeier ◽  
Harry Vereecken
Keyword(s):  
Hydraulic Properties ◽  
Gas Flow ◽  
Gas Permeability ◽  
Measurement Techniques ◽  
Solubility Limit ◽  
Soil Salinization ◽  
Crust Formation ◽  
Additional Information ◽  
Key Factor ◽  
The Impact

Soil salinization in irrigated croplands is a key factor in soil degradation and directly affects plant growth and soil hydrological processes such as evaporation and infiltration. In order to support the development of appropriate irrigation strategies, it is important to understand the impact of salt crusts that form during evaporation from saline soils on water flow. The determination of the effective hydraulic properties of salt crusts that control evaporation is still a challenge due to the lack of suitable measurement techniques. In this study, we propose an approach using gas flow to determine the permeability of salt crusts obtained from evaporation of unsaturated saline solutions of three different salt types and investigate the impact of the crust permeability on evaporation. For this, sand columns saturated with initial solutions of sodium chloride (NaCl), magnesium sulfate (MgSO4), and sodium sulfate (Na2SO4) at concentrations corresponding to 33% of the solubility limit were prepared and allowed to evaporate in order to induce crust formation. The results demonstrated that the intrinsic permeability of the dry salt crusts was similar for the different types of salts (≈4 × 10−12 m2), whereas the evaporation of the prepared columns differed significantly. We conclude that the intrinsic crust permeability only partly explains the impact of the crust on evaporation. Other effective crust properties such as porosity or unsaturated hydraulic properties may provide additional information on how evaporation is affected by salt crust formation.

scholarly journals The High-Rate Sealed MRPC to Promote Pollutant Exchange in Gas Gaps: Status on the Development and Observations

2021 ◽  
Vol 11 (11) ◽  
pp. 4722
Author(s):  
Botan Wang ◽  
Xiaolong Chen ◽  
Yi Wang ◽  
Dong Han ◽  
Baohong Guo ◽  
...  
Keyword(s):  
Gas Flow ◽  
High Rate ◽  
Stable Operation ◽  
Beam Test ◽  
High Luminosity ◽  
Rate Test ◽  
3D Printed ◽  
Resistive Plate Chambers ◽  
The Impact ◽  
Current Behavior

This work reports the latest observations on the behavior of two Multigap Resistive Plate Chambers (MRPC) under wide high-luminosity exposures, which motivate the development and in-beam test of the sealed MRPC prototype assembled with low-resistive glass. The operation currently being monitored, together with previous simulation results, shows the impact of gas pollution caused by avalanches in gas gaps, and the necessity to shrink the gas-streaming volume. With the lateral edge of the detector sealed by a 3D-printed frame, a reduced gas-streaming volume of ~170 mL has been achieved for a direct gas flow to the active area. A high-rate test of the sealed MRPC prototype shows that, ensuring a 97% efficiency and 70 ps time resolution, the sealed design results in a stable operation current behavior at a counting rate of 3–5 kHz/cm2. The sealed MRPC will become a potential solution for future high luminosity applications.

Influence of nozzle exit geometrical parameters on supersonic jet decay

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Prasanta Kumar Mohanta ◽  
B. T. N. Sridhar ◽  
R. K. Mishra
Keyword(s):  
Aspect Ratio ◽  
Nozzle Exit ◽  
Ambient Air ◽  
Schlieren Image ◽  
Geometrical Parameters ◽  
Image Study ◽  
Aspect Ratios ◽  
Core Length ◽  
Supersonic Core Length ◽  
The Impact

Abstract Experiments and simulations were carried on C-D nozzles with four different exit geometry aspect ratios to investigate the impact of supersonic decay characteristics. Rectangular and elliptical exit geometries were considered for the study with various aspect ratios. Numerical simulations and Schlieren image study were studied and found the agreeable logical physics of decay and spread characteristics. The supersonic core decay was found to be of different length for different exit geometry aspect ratio, though the throat to exit area ratio was kept constant to maintain the same exit Mach number. The impact of nozzle exit aspect ratio geometry was responsible to enhance the mixing of primary flow with ambient air, without requiring a secondary method to increase the mixing characteristics. The higher aspect ratio resulted in better mixing when compared to lower aspect ratio exit geometry, which led to reduction in supersonic core length. The behavior of core length reduction gives the identical signature for both under-expanded and over-expanded cases. The results revealed that higher aspect ratio of the exit geometry produced smaller supersonic core length. The aspect ratio of cross section in divergent section of the nozzle was maintained constant from throat to exit to reduce flow losses.

Hydrogen Concentration Analysis in Pecvd and Rtcvd Silicon Nitride Thin Films and It's Impact on Device Performance

2001 ◽  
Vol 664 ◽  
Author(s):  
C. Y. Wang ◽  
E. H. Lim ◽  
H. Liu ◽  
J. L. Sudijono ◽  
T. C. Ang ◽  
...  
Keyword(s):  
Chemical Vapor Deposition ◽  
Threshold Voltage ◽  
Vapor Deposition ◽  
Gas Flow ◽  
Chemical Vapor ◽  
Gate Oxide ◽  
Nitride Film ◽  
Device Performance ◽  
Gas Flow Ratio ◽  
The Impact

ABSTRACTIn this paper the impact of the ESL (Etch Stop layer) nitride on the device performance especially the threshold voltage (Vt) has been studied. From SIMS analysis, it is found that different nitride gives different H concentration, [H] in the Gate oxide area, the higher [H] in the nitride film, the higher H in the Gate Oxide area and the lower the threshold voltage. It is also found that using TiSi instead of CoSi can help to stop the H from diffusing into Gate Oxide/channel area, resulting in a smaller threshold voltage drift for the device employed TiSi. Study to control the [H] in the nitride film is also carried out. In this paper, RBS, HFS and FTIR are used to analyze the composition changes of the SiN films prepared using Plasma enhanced Chemical Vapor deposition (PECVD), Rapid Thermal Chemical Vapor Deposition (RTCVD) with different process parameters. Gas flow ratio, RF power and temperature are found to be the key factors that affect the composition and the H concentration in the film. It is found that the nearer the SiN composition to stoichiometric Si3N4, the lower the [H] in SiN film because there is no excess silicon or nitrogen to be bonded with H. However the lowest [H] in the SiN film is limited by temperature. The higher the process temperature the lower the [H] can be obtained in the SiN film and the nearer the composition to stoichiometric Si3N4.

Two-Phase Flows in Mini-/Micro-Gas Flow Channels of PEM Fuel Cells

2013 ◽  
Author(s):  
Sung Chan Cho ◽  
Yun Wang
Keyword(s):  
Pressure Drop ◽  
Gas Flow ◽  
Fluid Model ◽  
Pem Fuel Cells ◽  
Two Phase ◽  
Micro Gas Flow ◽  
Two Fluid Model ◽  
The Impact ◽  
Two Fluid ◽  
Phase Pressure

In this paper, two-phase flow dynamics in a micro channel with various wall conditions are both experimentally and theoretically investigated. Annulus, wavy and slug flow patterns are observed and location of liquid phase on different wall condition is visualized. The impact of flow structure on two-phase pressure drop is explained. Two-phase pressure drop is compared to a two-fluid model with relative permeability correlation. Optimization of correlation is conducted for each experimental case and theoretical solution for the flows in a circular channel is developed for annulus flow pattern showing a good match with experimental data in homogeneous channel case.

A Method for Evaluating Intensity of Water Cavitation Peening Processing

2011 ◽  
Vol 675-677 ◽  
pp. 747-750
Author(s):  
B. Han ◽  
Dong Ying Ju ◽  
Xiao Guang Yu
Keyword(s):  
Residual Stress ◽  
Process Capability ◽  
Diffraction Method ◽  
Spring Steel ◽  
Bubble Collapse ◽  
Plastic Layer ◽  
Process Conditions ◽  
X Ray Diffraction ◽  
Near Surface ◽  
The Impact

Water cavitation peening (WCP) with aeration, namely, a new ventilation nozzle with aeration is adopted to improve the process capability of WCP by increasing the impact pressure induced by the bubble collapse on the surface of components. In this study, in order to investigate the process capability of the WCP with aeration a standard N-type almen strips of spring steel SAE 1070 was treated byWCP with various process conditions, and the arc height value and the residual stress in the superficial layers were measured by means of the Almen-scale and X-ray diffraction method, respectively. The optimal fluxes of aeration and the optimal standoff distances were achieved. The maximum of arc height value reach around 150μm. The depth of plastic layer observed from the results of residual stresses is up to 150μm. The results verify the existence of macro-plastic strain in WCP processing. The distributions of residual stress in near-surface under different peening intensity can provide a reference for engineers to decide the optimal process conditions of WCP processing.

scholarly journals Simulation of X-Band Rainfall Observations from S-Band Radar Data

2006 ◽  
Vol 23 (9) ◽  
pp. 1195-1205 ◽  
Author(s):  
V. Chandrasekar ◽  
S. Lim ◽  
E. Gorgucci
Keyword(s):  
Doppler Radar ◽  
Theoretical Models ◽  
Radar Data ◽  
Shape Distribution ◽  
Microphysical Properties ◽  
Rain Medium ◽  
Microphysical Parameters ◽  
X Band ◽  
State Water ◽  
The Impact

Abstract To design X-band radar systems as well as evaluate algorithm development, it is useful to have simultaneous X-band observation with and without the impact of path attenuation. One way to develop that dataset is through theoretical models. This paper presents a methodology to generate realistic range profiles of radar variables at attenuating frequencies, such as X band, for rain medium. Fundamental microphysical properties of precipitation, namely, size and shape distribution information, are used to generate realistic profiles of X band starting with S-band observation. Conditioning the simulation from S band maintains the natural distribution of rainfall microphysical parameters. Data from the Colorado State University’s University of Chicago–Illinois State Water Survey (CHILL) radar and the National Center for Atmospheric Research S-band dual-polarization Doppler radar (S-POL) are used to simulate X-band radar variables. Three procedures to simulate the radar variables and sample applications are presented.

scholarly journals Assessing the regional impacts of Mexico City emissions on air quality and chemistry

2009 ◽  
Vol 9 (11) ◽  
pp. 3731-3743 ◽  
Author(s):  
M. Mena-Carrasco ◽  
G. R. Carmichael ◽  
J. E. Campbell ◽  
D. Zimmerman ◽  
Y. Tang ◽  
...  
Keyword(s):  
Air Quality ◽  
Mexico City ◽  
Ozone Production ◽  
Anthropogenic Aerosol ◽  
Near Surface ◽  
Mixing Ratios ◽  
Regional Impacts ◽  
Photolysis Rates ◽  
Regional Air Quality ◽  
The Impact

Abstract. The impact of Mexico City (MCMA) emissions is examined by studying its effects on air quality, photochemistry, and on ozone production regimes by combining model products and aircraft observations from the MILAGRO experiment during March 2006. The modeled influence of MCMA emissions to enhancements in surface level NOx, CO, and O3 concentrations (10–30% increase) are confined to distances <200 km, near surface. However, the extent of the influence is significantly larger at higher altitudes. Broader MCMA impacts (some 900 km Northeast of the city) are shown for specific outflow conditions in which enhanced ozone, NOy, and MTBE mixing ratios over the Gulf of Mexico are linked to MCMA by source tagged tracers and sensitivity runs. This study shows that the "footprint" of MCMA on average is fairly local, with exception to reactive nitrogen, which can be transported long range in the form of PAN, acting as a reservoir and source of NOx with important regional ozone formation implications. The simulated effect of MCMA emissions of anthropogenic aerosol on photochemistry showed a maximum regional decrease of 40% in J[NO2→NO+O], and resulting in the reduction of ozone production by 5–10%. Observed ozone production efficiencies are evaluated as a function of distance from MCMA, and by modeled influence from MCMA. These tend to be much lower closer to MCMA, or in those points where modeled contribution from MCMA is large. This research shows that MCMA emissions do effect on regional air quality and photochemistry, both contributing large amounts of ozone and its precursors, but with caveat that aerosol concentrations hinder formation of ozone to its potential due to its reduction in photolysis rates.

scholarly journals The Impact of Finer-Resolution Air–Sea Coupling on the Intraseasonal Oscillation of the Indian Monsoon

2011 ◽  
Vol 24 (10) ◽  
pp. 2451-2468 ◽  
Author(s):  
Nicholas P. Klingaman ◽  
Steven J. Woolnough ◽  
Hilary Weller ◽  
Julia M. Slingo
Keyword(s):  
Atmospheric Stability ◽  
Intraseasonal Oscillation ◽  
Boreal Summer ◽  
Upper Ocean ◽  
Vertical Resolution ◽  
Coupled Models ◽  
Diurnal Variability ◽  
Near Surface ◽  
The Impact ◽  
Coupling Frequency

Abstract A newly assembled atmosphere–ocean coupled model, called HadKPP, is described and then used to determine the effects of subdaily air–sea coupling and fine near-surface ocean vertical resolution on the representation of the Northern Hemisphere summer intraseasonal oscillation. HadKPP comprises the Hadley Centre atmospheric model coupled to the K-Profile Parameterization ocean boundary layer model. Four 30-member ensembles were performed that vary in ocean vertical resolution between 1 and 10 m and in coupling frequency between 3 and 24 h. The 10-m, 24-h ensemble exhibited roughly 60% of the observed 30–50-day variability in sea surface temperatures and rainfall and very weak northward propagation. Enhancing only the vertical resolution or only the coupling frequency produced modest improvements in variability and just a standing intraseasonal oscillation. Only the 1-m, 3-h configuration generated organized, northward-propagating convection similar to observations. Subdaily surface forcing produced stronger upper-ocean temperature anomalies in quadrature with anomalous convection, which likely affected lower-atmospheric stability ahead of the convection, causing propagation. Well-resolved air–sea coupling did not improve the eastward propagation of the boreal summer intraseasonal oscillation in this model. Upper-ocean vertical mixing and diurnal variability in coupled models must be improved to accurately resolve and simulate tropical subseasonal variability. In HadKPP, the mere presence of air–sea coupling was not sufficient to generate an intraseasonal oscillation resembling observations.

High Performance MEMS Thermal Gyroscope

2012 ◽  
Author(s):  
Nilgoon Zarei ◽  
Albert M. Leung ◽  
John D. Jones
Keyword(s):  
External Force ◽  
High Performance ◽  
Gas Flow ◽  
Element Model ◽  
Minimal Impact ◽  
Mems Gyroscope ◽  
Force Finding ◽  
Dimensional Finite Element ◽  
To Come ◽  
The Impact

This paper reports modeling a new design of Thermal MEMS gyroscope through the use of the Comsol Multiphysics software package. Being very small and having no movable parts have made thermal MEMS gyroscope very practical. Previously designed Thermal MEMS gyroscope shows some limitation such as being vulnerable to gravity force. Finding a technique to increase the range of thermal MEMS gyroscope reliability motivated us to come up with a new design that we will refer to as the ‘Forced Convection MEMS gyroscope’. A two-dimensional finite-element model of the device has been developed to investigate its performance. An external force has been introduced to the system to create a higher-velocity hot gas stream that will be deviated more in response to rotation. The external force should be great enough that convection currents resulting from gravity or acceleration will have minimal impact on the gyroscope sensitivity. A heating element can still be used, but its primary purpose is now to warm the flowing gas so that it can be detected by the sensors. In this paper we will also show that, in order to completely eliminate the impact of gravity and increase the sensitivity of the gyroscope, it is possible to eliminate the heaters entirely and instead use heated sensors to detect gas currents. In other words, the sensors are working as hot-wire anemometers. Our simulations suggest that this design variant results in higher sensitivity. We have also carried out optimization studies to identify the best location for the heaters and sensors. A prototype of this device has been fabricated based on MEMS techniques, and an external pump is used to produce an oscillating gas flow within the device.

Sign in / Sign up

Export Citation Format

Share Document