scholarly journals THE LAST TIME ANALYSIS OF THE FOLLOWING FAMILY IN AL-QUR'AN PERSPECTIVE

2020 ◽  
Vol 2 (2) ◽  
pp. 18-20
Author(s):  
Rona Dwi Rahmah
Keyword(s):  
Natural Disasters ◽  
Correlation Coefficient ◽  
Real Data ◽  
Least Square Method ◽  
Least Square ◽  
Single Word ◽  
Time Analysis ◽  
The Earth ◽  
Relationship Of ◽  
The Relationship

Abstract. Earthquakes are natural disasters caused by shocks on the earth due to faults and the sudden movement of tectonic rocks that make up the earth's crust. This study of earthquakes will be interesting if explored further from the perspective of the Qur'an because in the Qur'an there are many verses that speak of earthquakes. As explained in the Qur'an Al-Zalzalah verses 1-8. On February 14 2016 to February 23 2016 aftershocks occurred in the Klagon Village Area, Saradan District, Madiun. To analyze when the end of aftershocks ends by using the Least Square Method and the relationship of frequency of aftershocks to times that include the Omori, Omogi 1, Omogi 2 and Utsu methods. The conclusion of this study is the Omogi 2 method which has obtained the correlation coefficient r = 0.195 from the correlation value -1 ≤ r ≤ 1, with the aftershocks ending on day 464 and from the comparison of aftershock frequency corresponding to the graph between the results data calculations with real data (actual data) namely the Omogi 2 method. And basically the term earthquake in the Qur'an can still be said not to make the verses interpreted as a single word containing the meaning of the earthquake as a brief explanation of aftershocks in the perspective of the Qur'an.

scholarly journals Dampak E-Servive Quality Terhadap E-Satisfaction Serta Implikasinya Pada Online Repurchase B2C Shopee.com

2020 ◽  
Vol 10 (1) ◽  
pp. 109-118
Author(s):  
Raras Ivastya ◽  
Zaenal Fanani
Keyword(s):  
Service Quality ◽  
Least Square Method ◽  
Partial Least Square ◽  
Least Square ◽  
Online Questionnaire ◽  
Online Data ◽  
Partial Least Square Method ◽  
Relationship Of ◽  
The Relationship ◽  
Positive Effect

Internet services that were introduced in 1993 have an impact on behavior change and the ways of consumer decisions making. On the other hand, the emergence of various developments in information technology, connectivity and smartphones are also slowly able to change the way of consumers for meet the needs of a product or service. This research was conducted for intention to examine the effect of e-service quality on e-satisfaction and implications on B2C consumer repurchase online. Data was taken using an online questionnaire and distributed to B2C consumers with the last amount of data collected as many as 312 questionnaires and then be analyzed using the partial least square method. The results of the analysis show that e-service quality provides a significant positive effect on e-satisfaction and online repurchase for B2C consumers. In other results show e-satisfaction has a significant effect on online repurchase and is able to be a partial mediator of the relationship of e-service quality with online repurchase of B2C consumers.

Research on the Influence of PEG to the Nuclei Population Density of Copper Electrocrystallization

2013 ◽  
Vol 652-654 ◽  
pp. 787-790
Author(s):  
Qing Mei Wang ◽  
Feng Yan Sun
Keyword(s):  
Experimental Data ◽  
Population Density ◽  
Least Square Method ◽  
Least Square ◽  
Number Density ◽  
Glass Carbon Electrode ◽  
Sulphate Electrolyte ◽  
Glass Carbon ◽  
Relationship Of ◽  
The Relationship

Influences of the concentration of additive PEG and overpotential on the Nuclei population density of copper electrocrystallization on a glass carbon electrode (GCE) have been studied in this file. We characterized the experimental data extracted from Li’s work [10] with the least square method and exponential curves. The relationship of nucleation number density and overpotential follows the exponential function basically has been obtained by carrying on the data fitting to experimental data. And with a given overpotential, when inject PEG into acidic cupric sulphate electrolyte with a lower concentration, nucleation number density is reduced, but when the injection concentration of PEG is high enough, nucleation number density is increased instead. While with a certain concentration of PEG, as the overpotential more negative, the nuclei population density increased gradually, but if the injection concentration is low, the change of the growth rate of nucleation number density is not significant.

Numerical Correction High Temperature of Near-Infrared Colorimetry

2011 ◽  
Vol 301-303 ◽  
pp. 1378-1383
Author(s):  
Li Hua Yuan ◽  
Guan Hua Wu ◽  
Ming Li
Keyword(s):  
High Temperature ◽  
Surface Temperature ◽  
Near Infrared ◽  
Least Square Method ◽  
Mathematic Model ◽  
Least Square ◽  
Radiation Pyrometer ◽  
Surface Emissivity ◽  
Relationship Of ◽  
The Relationship

Colorimetry is commonly used to measure the surface temperature as true one when the surface emissivity is constant. That is, the target is regarded as greybody. But in fact, most materials are not greybody. Spectrum emissivity has to do with wavelength and temperature. And in the most case, it is difficult to assure the exact values of the emissivity .This makes the relative error of the temperature big. Therefore, it is necessary to modify the emissivity response of radiation pyrometer. The factor influencing the spectrum was researched through the application of least square method to create the relationship of spectrum emissivity with wavelength and temperature, at last mathematic model was established which provided numerical correction of infrared two-color thermometry.

A FORECAST OF PRODUCTIVE LONGEVITY OF HOLSTEIN COWS BY INDIRECT SIGNS

2020 ◽  
Author(s):  
З.С. САНОВА
Keyword(s):  
Correlation Coefficient ◽  
Aging Process ◽  
Direct Relationship ◽  
Stability Index ◽  
Age At First Calving ◽  
Group I ◽  
Predicted Values ◽  
The Stability ◽  
Relationship Of ◽  
The Relationship

В статье представлены материалы о взаимосвязи продолжительности продуктивного использования коров с характеристикой устойчивости к деградации, с возрастом отела и удоем. В исследованной, разнородной по происхождению, группе животных для прогноза продуктивного периода коров, обусловленного устойчивостью к деградации и возрастом первого отела, пригодно уравнение регрессии, аргументами в котором являются индекс устойчивости, возраст первого отела в первой и второй степенях. Коэффициент корреляции межу предсказанными значениями продуктивного периода и его фактическими величинами в I группе составляет 0,502, во II - 0,604. При этом крайние варианты прогнозируются со статистическими ошибками 5 мес при оценке индекса устойчивости по 2 лактациям и 4,1 мес по 3, а средние варианты, соответственно, 1,6 и 1,51 мес. Индекс устойчивости к процессу старения является важной характеристикой биологических особенностей коров, определяющий их продуктивное долголетие. Его оценка по первым 2 и 3 лактациям имеет прямолинейную связь с продуктивным периодом (r=0,4109 и r=0,5270), соответственно. Зависимость продуктивного периода от возраста первого отела криволинейная — с увеличением возраста первого отела сокращается срок продуктивного использования, при возрасте первого отела более 1400 дней срок продуктивного использования колеблется от 1,33 до 1,41 лактации. Коэффициент корреляции между этими характеристиками коров составляет - 0,2164 в I и - 0,2620 во II группах. The article presents materials about the relationship of the duration of productive use of cows with the characteristic of resistance to degradation, with the age of calving and milk yield. In the studied group of animals, which is heterogeneous in origin, the regression equation is suitable for predicting the productive period of cows due to resistance to degradation and the age of the first calving, the arguments of which are the stability index, the age of the first calving in the first and second degrees. The correlation coefficient between the predicted values of the productive period and its actual values in group I is 0.502, in group II - 0.604. At the same time, the extreme variants are predicted with statistical errors of 5 months when evaluating the stability index for 2 lactations and 4.1 months for 3, and the average variants, respectively, are 1.6 and 1.51 months. The index of resistance to the aging process is an important characteristic of the biological characteristics of cows, which determines their productive longevity. Its estimate for the first 2 and 3 lactations has a direct relationship with the productive period (r=0.4109 and r=0.5270), respectively. The dependence of the productive period age at first calving curvilinear with increasing age at first calving reduces the time to productive use, while age at first calving of more than 1400 days, the period of productive use ranges from 1.33 to 1.41 lactation. The correlation coefficient between these characteristics of cows is-0.2164 in I and-0.2620 in II groups.

scholarly journals Potential Functions and Thermodynamic Properties of UC, UN, and UH

2020 ◽  
Vol 2020 ◽  
pp. 1-6
Author(s):  
Shuang-Ling Tang ◽  
Yu Wang ◽  
Qi-Ying Xia ◽  
Xue-Hai Ju
Keyword(s):  
Configuration Interaction ◽  
Density Functional ◽  
Least Square Method ◽  
Potential Functions ◽  
Least Square ◽  
Basis Set ◽  
Dissociation Energies ◽  
Anharmonicity Constant ◽  
Different Temperatures ◽  
Relationship Of

Potential energy surface scanning for UC, UN, and UH was performed by configuration interaction (CI), coupled cluster singles and doubles (CCSD) excitation, quadratic configuration interaction (QCISD (T)), and density functional theory PBE1 (DFT-PBE1) methods in coupling with the ECP80MWB_AVQZ + 2f basis set for uranium and 6 − 311 + G∗ for carbon, hydrogen, and nitrogen. The dissociation energies of UC, UN, and UH are 5.7960, 4.5077, and 2.6999 eV at the QCISD (T) levels, respectively. The calculated energy was fitted to the potential functions of Morse, Lennard-Jones, and Rydberg by using the least square method. The anharmonicity constant of UC is 0.0047160. The anharmonic frequency of UC is 780.27 cm−1 which was obtained based on the PBE1 results. For UN, the anharmonicity constant is 0.0049827. The anharmonic frequency is 812.65 cm−1 which was obtained through the PBE1 results. For UH, the anharmonicity constant is 0.017300. The anharmonic frequency obtained via the QCISD (T) results is 1449.8 cm−1. The heat capacity and entropy in different temperatures were calculated using anharmonic frequencies. These properties are in good accordance with the direct DFT-UPBE1 results (for UC and UN) and QCISD (T) results (for UH). The relationship of entropy with temperature was established.

Approximation of the Kinematics of Foot Joints by Using Passive Elastic Characteristics of Joint

2007 ◽  
Vol 342-343 ◽  
pp. 621-624
Author(s):  
Hyeon Ki Choi ◽  
Si Yeol Kim ◽  
Won Hak Cho
Keyword(s):  
Joint Angle ◽  
Reaction Force ◽  
Force Plate ◽  
Least Square Method ◽  
Least Square ◽  
Biomechanical Analysis ◽  
Clinical Evaluations ◽  
Foot Joints ◽  
The Relationship ◽  
Elastic Characteristics

We investigated the relationship between kinematic and kinetic characteristics of foot joints resisting ground reaction force (GRF). Passive elastic characteristics of joint were obtained from the experiment using three cameras and one force plate. The relationship between joint angle and moment was mathematically modeled by using least square method. The calculated ranges of motion were 7o for TM joint, 4o for TT joint and 20o for MP joint. With the model that relates joint angle and plantar pressure, we could get the kinematic data of the joints which are not available from conventional motion analysis. The model can be used not only for biomechanical analysis which simulates gait but also for the clinical evaluations.

Parameters Identification for Nonlinear Duffing System Based on Wavelet Transformation

2013 ◽  
Vol 357-360 ◽  
pp. 1524-1530
Author(s):  
Shi Zhou ◽  
Dong Mei Huang ◽  
Wei Xin Ren ◽  
Qiong Li Wang
Keyword(s):  
Forced Vibration ◽  
Wavelet Transformation ◽  
Recognition Accuracy ◽  
Vibration Signal ◽  
Least Square Method ◽  
Least Square ◽  
Instantaneous Amplitude ◽  
Approximate Analytical Expression ◽  
Duffing System ◽  
The Relationship

Continuous wavelet transformation is made to identify the parameters of damped harmonic forced vibration Duffing system. With the aid of conversion relationship between the scale and frequency, the solution of nonlinear Duffing equation is adopted by average method, which gained approximate analytical expression for instantaneous amplitude and instantaneous frequency of the system. The nonlinear stiffness coefficient and natural frequency can be gained by least square method and the relationship between recognition accuracy and parameter selection are summarized in the article. Parameter identification method of harmonic forced vibration system is proposed in this paper. Studying the wavelet ridge and corresponding scale by segments to filter out the affects of the simple harmonic motion, to extract systems free vibration signal and to achieve the goal of identifying system parameters.

scholarly journals HUBUNGAN PERSEPSI TENTANG PROFESI FISIOTERAPI DENGAN MOTIVASI BELAJAR MAHASISWA AKADEMI FISIOTERAPI UKI

2018 ◽  
Vol 10 (3) ◽  
pp. 226
Author(s):  
Maksimus Bisa
Keyword(s):  
Regression Analysis ◽  
Linear Regression ◽  
Correlation Analysis ◽  
Correlation Coefficient ◽  
Linear Regression Analysis ◽  
Motivation To Learn ◽  
Simple Linear Regression ◽  
Level 1 ◽  
Relationship Of ◽  
The Relationship

ABSTRACTThis study is descriptive analitik, aims to describe the relationship of perceptions about the physiotherapy profession with the motivation to learn students of the Academy of Physiotherapy UKI. Data collection through questionnaires to students of Physiotherapy Academy UKI level 1, 2, and 3 with a sample of 53 students, then give a score of each statement of questionnaire.The result of correlation analysis shows that p = 0,584> α (0,05) ho is accepted, so there is no significant relationship between the two variables. To measure the closeness and intensity of the relationship between the two variables, test of correlation coefficient and simple linear regression. The result of correlation coefficient test (r) obtained by -0,077, lies below the value of -0.30 (very weak) thus can be said there is no relation between perception about physiotherapy profession with motivation learn student Akfis UKI. Result of linear regression analysis obtained equation: Y = 73,52 + (-0,088) X. This means that every 1 point decrease of perception value will influence motivation value equal to 0,088 times.Keywords: Perception, motivation, physiotherapy profession, and learning achievement. ABSTRAKPenelitian ini bersifat deskriptif analitik, bertujuan untuk mendeskripsikan hubungan persepsi tentang profesi fisioterapi dengan motivasi belajar siswa Akademi Fisioterapi UKI. Pengumpulan data melalui kuesioner kepada siswa Fisioterapi Academy UKI tingkat 1, 2, dan 3 dengan sampel sebanyak 53 siswa, kemudian memberikan skor masing-masing kuesioner pernyataan. Hasil analisis korelasi menunjukkan bahwa p = 0,584> α (0,05) ho diterima, sehingga tidak ada hubungan yang signifikan antara kedua variabel tersebut. Untuk mengukur kedekatan dan intensitas hubungan antara kedua variabel tersebut, uji koefisien korelasi dan regresi linier sederhana. Hasil uji koefisien korelasi (r) diperoleh sebesar -0,077, berada di bawah nilai -0,30 (sangat lemah) sehingga dapat dikatakan tidak ada hubungan antara persepsi tentang profesi fisioterapi dengan motivasi belajar siswa Akfis UKI. Hasil analisis regresi linier diperoleh persamaan: Y = 73,52 + (-0,088) X. Artinya setiap 1 titik penurunan nilai persepsi akan mempengaruhi nilai motivasi sebesar 0,088 kali.Kata kunci: Persepsi, motivasi, profesi fisioterapi, dan prestasi belajar.

scholarly journals A Sonographic Study on Estimating of Gestational Age by Placental Thickness

2020 ◽  
Vol 8 (1) ◽  
pp. 110-113
Author(s):  
Prashanth G Patil ◽  
KM Nataraj ◽  
Shaik Hussain Saheb
Keyword(s):  
Correlation Coefficient ◽  
Gestational Age ◽  
Ultrasound Examination ◽  
Prediction Interval ◽  
Good Alternative ◽  
Third Trimester ◽  
Biometric Parameters ◽  
Relationship Of ◽  
The Relationship ◽  
Placental Thickness

Background: Knowledge of gestational age (GA) is important because it affects clinical management in many ways. Ultrasonography has provided a safe and noninvasive means of dating a pregnancy. The purpose of the present study is to assess the relationship of placental thickness with gestational age and to compare it with other sonographic parameters used to estimate gestational age. Subjects and Methods: The study included 242 normal pregnant women who knew their last menstrual period (LMP). After taking consent, all the women underwent an ultrasound examination. During the scan, besides measuring routine biometric parameters, Placental thickness at the cord insertion was also measured. A retrospective study was designated to test the hypothesis that placental thickness in an age dependant variable and hence can predict gestational age. In the end, the predicted gestational age by placental thickness was compared with gestational age as determined by other sonographic parameters. Results: Placental thickness showed a linear progression in relation to the menstrual age. The correlation coefficient was found to be 0.86(p<0.001). The regression equation was formulated by regressing gestational age on the measured placental thickness. The correlation coefficient between GA-LMP and GA-USG was 0.92 as compared to 0.86 between GA-LMP and GA-PT. The standard error for other USG parameters was +2.32 compared to +2.96 for placental thickness. Conclusion: Placental thickness being a fusion of menstrual age, can be used to predict the gestational age by using the regression formula. Gestational age calculated by other USG parameters is closer to menstrual age as compared to that by placental thickness. The prediction interval was slightly more when the placental thickness was used instead of other USG parameters. Placental thickness is a good alternative parameter for predicting gestational age in the second and third trimester.

scholarly journals Effect of compensation on employee performance towards motivation as mediation variable

2019 ◽  
Vol 6 (5) ◽  
pp. 134-143
Author(s):  
Intan Candradewi ◽  
I Gst. A. Manuati Dewi
Keyword(s):  
Employee Performance ◽  
Sampling Technique ◽  
Total Sample ◽  
Partial Least Square ◽  
Least Square ◽  
Sample Technique ◽  
Saturated Sample ◽  
Relationship Of ◽  
The Relationship

The purpose of this study was to analyze and explain the role of mediation motivation in the relationship of compensation to employee performance at Wisma Prashanti Hospital. The population in this study were employees of Wisma Prashanti Hospital with a total sample of 83 respondents. The sampling technique is carried out is a saturated sample technique, the entire population is used as a sample. The research instrument used a questionnaire and analysis method using Partial Least Square (PLS) with SmartPLS 3.2 software. The results showed (1) compensation has a positive and significant effect on employee performance (2) compensation has a positive and significant effect on motivation (3) motivation has a positive and significant effect on employee performance (4) motivation mediates partially and positively and significantly on the relationship between compensation and employee performance. The implications of the results of this study indicate that compensation is found to be a major factor in improving employee performance.

Sign in / Sign up

Export Citation Format

Share Document