scholarly journals The Theory and Practice of Evaluating Green Factories in China

Author(s):  
Meng Yang ◽  
Husheng Li ◽  
Jinhui Li

It is well acknowledged that, China is a country with copious manufacturing industries, and Chinese industrial products spread all over the world. Research into the theory and practice of evaluating manufacturing factories in China is of highly significant. However, the traditional method of evaluating factories tends to focus on individual aspects such as efficiency, energy conservation, and environmental protections. There have been relatively few reports covering comprehensive evaluation methods for a systematic green factory. Based on an analysis of the current situation in various countries and regions, the concept and scope of the China Green Factory (CGF) have been defined. The characteristics of a CGF include the intensification of land, the decontamination of raw materials, clean production, waste administration, and the reduction of carbon and energy. The objectives of this paper are to highlight the current policy and research on the CGFs, quantify the positive effects of CGFs, and make some suggestions for future development.

2015 ◽  
Vol 660 ◽  
pp. 9-16 ◽  
Author(s):  
Wan Mastura Wan Ibrahim ◽  
Kamarudin Hussin ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Aeslina Abdul Kadir ◽  
Mohammed Binhussain

Bricks are widely used as a construction and building material due to its properties. Recent years have seen a great development in new types of inorganic cementitious binders called ‘‘geopolymeric cement’’ around the world. This prompted its use in bricks, which improves the greenness of ordinary bricks. The development of fly ash-based geopolymer lightweight bricks is relatively new in the field of construction materials. This paper reviews the uses of fly ash as a raw materials and addition of foaming agent to the geopolymeric mixture to produce lightweight bricks. The effects on their physical and mechanical properties have been discussed. Most manufactured bricks with incorporation of foaming agent have shown positive effects by producing lightweight bricks, increased porosity and improved the thermal conductivities of fly ash-based geopolymer bricks. However, less of performances in number of cases in terms of mechanical properties were also demonstrated.


Author(s):  

The article examines the linguistic and cultural phenomenon of borrowing English words in the Chinese and Russian languages in the commercial sphere as a consequence of the growing influence of English in the context of globalization. Today English has become common in every country, and more and more people are beginning to speak English. Sometimes this interest is prompted by a desire to explore international culture and to travel. However, with increasing frequency, the knowledge of English is seen as necessary for professional work, because English has become a universal tool of communication in business, commerce, and international trade. This phenomenon of Anglicization is definitely present both in China and Russia, and the article looks at the vocabulary sphere which is especially vulnerable to bor-rowings: that of commercial and trade terminology. The article gives a review of phonetic borrowings from English into Chinese and Russian, focusing on the specific character of borrowings in Chinese in connection with peculiarities of the script and sounds. It also presents respective examples of borrowings in the sphere of trade, seeks to understand why English terms are borrowed into both languages, and introduces the classification by K. Palmgren which includes commercial borrowings. The author recognizes that both China and Russia are somewhat concerned about the impact of English on their languages, feeling that the increased influx of English words and phrases may pose a threat to their future development and even potentially slow it down. The influence of English on modern Chinese and Russian languages is undoubtedly significant, and, with current policy, aimed at integration into the world economy, this influence is only expected to grow. In the context of increasing commercial connections between the countries, Anglicisms continue to replace the Russian vocabulary. However, it primarily concerns the vocabulary of trade and commerce, while in daily communication English borrowings are used much more rarely. Thus, the author concludes that, although there is a tendency toward fully replacing Russian trade and commercial terms with those of English origin and, in all probability, this tendency will only be expanding, such penetration of Anglicisms into separate spheres doesn’t threaten the integrity of the language system as a whole.


1948 ◽  
Vol 158 (1) ◽  
pp. 437-449
Author(s):  
H. C. Topham-Bruckmann

Wood is one of the most important of raw materials; it can be used in various ways to meet demand, and can also be grown as required. In spite of its extensive use throughout the ages, and the wastage caused by fire and axe, there still exist huge virgin forests, covering partly unexplored regions of the world, whilst scientific forest management gains increased scope in keeping the timber resources in line with the constantly growing demand. Saw-milling is one of the main methods employed in wood conversion, producing sawn timber such as boards, planks, battens, and cants. Three types of saw-mill head rigs are used, i.e. circular, band, and frame. This paper deals with certain particulars related to the reciprocating type—the frame- or gang-saw. The circular- and band-saw-mills use continuously moving saw-blades, but frame-saws have to be sufficiently powered and strong enough to take up the great force developed by the reciprocating motion of the saw-gate, blades, and all accessories. The first patents and other technical literature relating to almost any type of woodworking and saw-mill machinery are of British origin. At the beginning of the Industrial Revolution Britain was leading for many years in the manufacture of these machines, but more recently frame-saws and other types were developed in many parts of the world, where a growing saw-mill industry has had to satisfy its needs for such machines, well suited to local demands. It should be a matter of topical interest to give some details here of the close relationship between theory and practice in their application to the frame-saws, due to the fact that enormous damage was done during the recent war years, not only to all kinds of property which requires urgent replacement, but also to the fact that numerous saw-mills have first to be put in order, before they can again produce the timber needed for urgent repair work.


2015 ◽  
Vol 12 (1) ◽  
pp. 33-42
Author(s):  
Neven Hadži? ◽  
Marko Tomi? ◽  
Nikola Vladimir ◽  
Siniša Ostoji? ◽  
Ivo Senjanovi?

Shipbuilding is one of the most important manufacturing industries in Croatia involved in ships and offshore units’ production, maintenance, repair and installation with a significant impact on Croatian economy and society. Current state of the Croatian shipbuilding industry is presented herein, based on the most recent available data on global and domestic shipbuilding activities and important conclusions and recommendations for its future development are drawn considering current state of the world shipping and shipbuilding databases. Future perspectives are addressed through analysis of current negotiation potential of suppliers and buyers as well as with respect to the rivalry among competitors. An importance of stable financial background and development of the domestic industrial surroundings is pointed out. Along with that, current Croatian industrial 2020 strategy is addressed in order to enhance its application within the existing shipbuilding infrastructure as well as within Croatian economy. Finally, energy, food and entertainment market sectors are pointed out as the most perspective sectors capable of influencing future Croatian society, economy, science and technology.


2004 ◽  
Vol 58 (5) ◽  
pp. 201-212
Author(s):  
Milorad Krgovic ◽  
Slobodan Jovanovic

During 1994 278 million tons of paper were produced worldwide, while around 330 million tons were produced in 2002. The forecast for paper production in 2010 is 420 million tons. From these data, it may be concluded that the paper production industry, which exists for around 2000 years, is still a very attractive industrial branch. This work represents the conditions in the production of the major and auxiliary raw materials for paper production, as well as paper production in the World and production forecasts until 2010. It was indicated that the fraction of secondary fibers obtained from recycled paper increases every year in regard primary fibers. In 2010 secondary fibers will be the major source of primary raw materials for paper production in the World. It was pointed out that in the last fifteen years the quantity of paper produced during one season grew rapidly. This growth was achieved by advance stock preparation of paper and increased velocity of the paper machine and the width web of the produced paper. Activities regarding environmental protection undertaken by manufacturers of paper and fibers are presented.


Author(s):  
Lina Yurievna Lagutkina

The author of the article discloses the prospects of development of the world feed production for aquaculture based on the analysis of key innovative technological and market trends. The author specifies that shortage, high cost, low ecological compatibility of traditional raw materials - fish flour - are among major limiting factors in the development of production of feeds for aquaculture. This fact, in turn, limits sustainable development of aquaculture both in Russia, and in the world in general. The article presents the overview of a current status of the world industry of feed production in aquaculture, where the regional situation is studied, as well. For the first time, there is given the outlook of innovative technologies in feed production based on the alternative sources of protein (on the example of projects of leading aquabiotechnological companies) which will determine industry’s objectives for the mid-term perspective.


2020 ◽  
Vol 11 (SPL1) ◽  
pp. 187-191
Author(s):  
Anjankar Ashish P ◽  
Anjankar Vaibhav P ◽  
Anjankar Anil J ◽  
Kanyal Lata

COVID 19 is undeniably one of the deadliest diseases that humanity has ever seen. It continues to affect the lives and livelihood of people appallingly across the world. Maximum discussions focus towards the apprehension of catching the infection, dwelling in homes, overpopulated nursing homes and shut down of all kinds. But, here let’s discuss the positive side of COVID 19 pandemic.As COVID 19 has spread its influence all over the world, affected countries have either announced lockdown or have implemented severe restrictions in their respective countries. Because of this, everyone dwells in their homes. Thus, exercising social distancing and functioning from home. All of the above is directed at restricting the transmission of coronavirus and expectantly ostracising the fatality from COVID 19. These transformations have also brought about some unanticipated emanations; some good things have come out of the pandemic as well. Positive effects of COVID 19 are seen on reduced road traffic, and road traffic accidents lowered levels of air pollution which has to lead to lowered heart attack rates and rejuvenating environment. Crime rates have fallen, and expenses are reduced in most places. Community action, communication amongst families, behaviour, sanitation, hygiene, online and distance education has positively impacted by COVID 19 pandemic. COVID 19 despite a bane for humans, can be thought of a boon for living beings. The habitats and elements have been purified with the stringent use of petrochemical products. To breathe fresh air and to consume purified water is a boon by itself. Now, it is time for humans to lead a caring life to every bounty bestowed on them by Nature. This thoughtful and considerate life will give hope for a healthy, stress-free life.


Author(s):  
علاء حسنى المزين (Alaa Hosni)

كان من أهم الآثار الإيجابية للصحوة الإسلامية التى عمت العالم الإسلامى بشكل ملحوظ منذ أوائل السبعينيات فى القرن العشرين زيادة إقبال الشعوب الإسلامية على تعلم اللغة العربية، وبدأ الاهتمام الحقيقى لجامعات العالم الإسلامى بتوفير مساقات متخصصة لهذا الغرض منذ أوائل الثمانينات، وكانت الجامعة الإسلامية العالمية بماليزيا التى أسست سنة 1983 من أنشط الجامعات فى هذا الصدد، وهو نشاط استلفت نظر الباحث إذ وجده يستحق الرصد والتوثيق العلمى، والمراجعة إذا اقتضت الضرورة لا بهدف الإشادة بالتجربة بل رغبة فى الإفادة والاستفادة من قبل المختصين من المهتمين بهذا الميدان الحيوى من ميادين خدمة اللغة العربية بل خدمة الإسلام، وحضارته نظرا للارتباط الوثيق بين اللغة العربية وهذا الدين الحنيف باعتبارها لغة كتابه الخالد، والمعلم الرئيس من معالم الهوية الإسلامية المميزة والصمود الحضارى.*****************************************************One of the most positive effects of the Islamic awakening since the early seventies, in the twentieth century, which spread across the Islamic world in a significant manner, has been the increased Muslims’ interest in learning the Arabic language all over the world. There began a real interest in the universities of the Muslim world for the Arabic language by providing specialized courses for this purpose since the early eighties and  the International Islamic University Malaysia established in 1983 has been the most active university in this regard. And this activity of the university drew the interest of the researcher who found it worthy of investigation and scientific documentation as well as of revision, if necessary, not in order to pay tribute to the experience, but for taking advantage and learning from specialists interested in this vital field of the fields of Arabic language service which is actually service of Islam and its civilization considering the strong connection between Islam and the Arabic language, the language of the Qur’Én , the most distinctive feature of Islamic identity and resilience of Islamic civilization.


Author(s):  
В.Н. СУРОВЦЕВ ◽  
Е.Н. ПАЮРОВА

Проанализированы проблемы на рынке молока и молочных продуктов России в условиях глобального экономического кризиса: перепроизводство молока в основных странах-экспортерах, снижение закупочных цен на сырое молоко, снижение цен на биржевые товары в мире и России в 2020 году, тренд на уменьшение спроса на молочные продукты на мировом рынке в среднесрочном периоде, снижение общего спроса на молочные продукты на внутрироссийском рынке при падении реальных доходов населения, изменение структуры потребления. Проведена оценка новых возможностей и угроз для развития отрасли: со стороны потребителей — рост цен на продовольствие, снижение доходов; с позиции производителей молока — снижение закупочных цен, рост требований к сырью для производства продукции с увеличенными сроками годности, дефицит рабочей силы, вероятное сокращение господдержки в результате снижения цен на углеводороды, попытки регулирования цен; со стороны перерабатывающих предприятий — сокращение спроса, снижение цен на готовую продукцию вслед за мировыми ценами. Обоснованы приоритеты инвестирования в молочном скотоводстве и основные формы совершенствования государственной поддержки отрасли, обеспечивающие эффективную адаптацию производителей молока к новым экономическим условиям, повышение устойчивости отрасли при усилении макроэкономических рисков. The article analyzes the problems in the Russian milk and dairy products market in the context of the global economic crisis: overproduction of milk in the main exporting countries, lower purchase prices for raw milk, lower prices for commodities in the world and in Russia in 2020, trend to reduce demand for dairy products on the world market in medium term, a decrease in total demand for dairy products in the Russian market with a decrease in the purchasing power of the population, a change in the structure of consumption. An assessment of new opportunities and threats to the development of the industry was carried out: on the part of consumers — rising food prices, lower incomes; from the perspective of dairy producers — reduction in purchase prices, increased requirements for raw materials for the production of products with extended periods, labor shortages, the likely reduction in state support as a result of lower prices for hydrocarbons, attempts to regulate prices; on the part of processing enterprises — reduction of demand, reduction of prices for finished goods following world prices. The investment priorities in dairy cattle breeding and the main forms of improving state support for the industry, ensuring the effective adaptation of milk producers to new economic conditions, increasing the sustainability of the industry with increasing macroeconomic risks, are substantiated.


2020 ◽  
Vol 19 (4) ◽  
pp. 330-334
Author(s):  
Octavio A. Chon Torres

AbstractThere is a record of the positive effects of astrobiological research for the natural sciences and eventually for their technological use on Earth. However, on the philosophical effects, this is not as visible as the other sciences, which is why it can be assumed that it is a waste of time speculating on astrobioethics or also on the philosophy of astrobiology. This is the reason why this work seeks to identify and sustain the philosophical utility of astrobioethics. To achieve this, this article focuses on three essential aspects: teloempathy, education and astrotheology. Russell's argument about the value of philosophy will be used as a fundamental basis for the usefulness of astrobioethics.


Sign in / Sign up

Export Citation Format

Share Document