Iron Chloride Flocculation of Bacteriophages from Seawater

Author(s):  
Bonnie T. Poulos ◽  
Seth G. John ◽  
Matthew B. Sullivan
Keyword(s):  
1975 ◽  
Vol 10 (1) ◽  
pp. 101-109
Author(s):  
H. Kirk Johnston ◽  
H.S. Lim

Abstract The suitability of reverse osmosis as a renovation technique for the treatment of municipal wastewaters has been assessed. Cellulose acetate membranes capable of 70% and 90% NaCl rejections were employed in both laboratory and pilot plant studies to evaluate the efficiency of this technique in removing the residual precipitant chemicals generally employed in phosphorus removal programs (iron chloride, alum, and lime) and the nutrients (phosphates, nitrates and ammonia) characteristic of municipal wastewaters. Secondary sewage and raw sewage as well as prepared nutrient solutions were employed in the course of this program. Both laboratory and pilot plant studies indicated consistently outstanding removal efficiencies for the species examined, almost independent of the nature of the waste solutions being treated. Permeation of the purified effluent was subject to significant reductions due to membrane fouling. This characteristic was most pronounced for the more permeable (less selective) membranes. Routine chemical and physical cleanings enable satisfactory flux levels to be maintained, thereby suggesting that reverse osmosis may become a viable municipal waste treatment technique.


Author(s):  
Amer Imraish ◽  
Afnan Al-Hunaiti ◽  
Tuqa Abu-Thiab ◽  
Abed Al-Qader Ibrahim ◽  
Eman Hwaitat ◽  
...  

Background: The growing unsatisfaction toward the available traditional chemotherapeutic agents enhanced the need to develop new methods for obtaining materials with more effective and safe anti-cancer properties. Over the past few years, usage of metallic nanoparticles has been a target for researchers of different scientific and commercial fields due to their tiny sizes, environment friendly properties and wide range applications. To overcome the obstacles of traditional physical and chemical methods for synthesis of such nanoparticles, a new less expensive and eco-friendly method has been adopted using natural existing organisms as a reducing agent to mediate synthesis of the desired metallic nanoparticles from their precursors, a process called green biosynthesis of nanoparticles. Objective: Here in the present study, zinc iron bimetallic nanoparticles (ZnFe2O4) were synthesized via an aqueous extract of Boswellia Carteri resin mixed with zinc acetate and iron chloride precursors, and they were tested for their anticancer activity. Methods: Various analytic methods were applied for the characterization of the Phyto synthesized ZnFe2O4 and they were tested for their anticancer activity against MDA-MB-231, K562, MCF-7 cancer cell lines and normal fibroblasts. Results: Our results demonstrate the synthesis of cubic structured bimetallic nanoparticles ZnFe2O4 with an average diameter 10.54 nm. MTT cytotoxicity assay demonstrate that our phyto-synthesized ZnFe2O4 nanoparticles exhibited a selective and potent anticancer activity against K562 and MDA-MB-231 cell lines with IC50 values 4.53 µM and 4.19 µM, respectively. Conclusion: In conclusion, our bio synthesized ZnFe2O4 nano particles show a promising environmentally friendly of low coast chemotherapeutic approach against selective cancers with a predicted low adverse side effect toward normal cells. Further in vivo advanced animal research should be done to execute their applicability in living organisms.


Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1109
Author(s):  
Robert Bock ◽  
Björn Kleinsteinberg ◽  
Bjørn Selnes-Volseth ◽  
Odne Stokke Burheim

For renewable energies to succeed in replacing fossil fuels, large-scale and affordable solutions are needed for short and long-term energy storage. A potentially inexpensive approach of storing large amounts of energy is through the use of a concentration flow cell that is based on cheap and abundant materials. Here, we propose to use aqueous iron chloride as a reacting solvent on carbon electrodes. We suggest to use it in a red-ox concentration flow cell with two compartments separated by a hydrocarbon-based membrane. In both compartments the red-ox couple of iron II and III reacts, oxidation at the anode and reduction at the cathode. When charging, a concentration difference between the two species grows. When discharging, this concentration difference between iron II and iron III is used to drive the reaction. In this respect it is a concentration driven flow cell redox battery using iron chloride in both solutions. Here, we investigate material combinations, power, and concentration relations.


Author(s):  
Sławomir Majdanik ◽  
Barbara Potocka-Banaś ◽  
Sebastian Glowinski ◽  
Krzysztof Borowiak

Abstract Purpose Cases of iron intoxication are not very often encountered in toxicology practice, and most of those reported concern accidental intoxications with iron supplements in young children. The paper presents a rare case of a suicide by intoxication in an adult woman who ingested a solution of iron (III) chloride. Methods A forensic was at the Department of Forensic Medicine, PMU in Szczecin. Toxicology tests of blood sampled from the deceased were performed using a 644 CIBA CORNING ion selective analyzer and proprietary reagent kits. Histopathological was with the use of the standard staining protocol (hematoxylin and eosin) and staining specific for iron (Prussian blue). Results Autopsy revealed a distinct yellow discolouration and thrombotic necrosis of the oral mucosa and almost the whole gastrointestinal tract, as well as similar changes in the adjacent internal organs. Considerably high levels of iron and chloride ions were detected in specimens of internal organs preserved during autopsy. Histopathological analysis performed with the use of staining specific for iron (Prussian blue) also confirmed the presence of iron in the examined tissues, especially in the intestines and liver. Conclusions Considering the above findings, it was concluded in the forensic report that the death of the woman was caused by the ingestion of iron chloride. The reported case of fatal intoxication is one of the few described in the literature, and its course implies that in the case of initially diagnosed intoxication with corrosive compounds, the possibility of using metal-containing poison should also be considered in the differential diagnosis. In addition to routine toxicological tests performed in fatal cases we also draw attention to the possibility of using specific staining protocols for microscopic specimens.


2017 ◽  
Vol 248 ◽  
pp. 235-245 ◽  
Author(s):  
Mohamed Ben Yahia ◽  
Salah Knani ◽  
Layla Ben Haj Hsan ◽  
Manel Ben Yahia ◽  
Hbib Nasri ◽  
...  

2016 ◽  
Vol 20 (3) ◽  
pp. 967-972 ◽  
Author(s):  
Peng Liu ◽  
Chun-Hui He ◽  
Fujuan Liu ◽  
Lan Xu ◽  
Yuqin Wan ◽  
...  

In this work, ?-Fe2O3 nanobulk with high aspect ratio were successfully prepared via a facile bubble electrospinning technique using polyvinylidene fluoride and iron chloride hexahydrate (FeCl3?6H2O) as ?-Fe2O3 precursor followed by annealing in air at 600?C. The products were characterized with field emission scanning electron microscope, Fourier transform infrared, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The results showed that ?-Fe2O3 nanobulk has a hierarchical heterostructure which has an extremely broad application prospect in many areas.


2021 ◽  
Author(s):  
Yong Cheng ◽  
Longjun Xu ◽  
Chenglun Liu ◽  
Zao Jiang ◽  
Qiyuan Zhang ◽  
...  

Abstract In this work, red mud was used as raw material to extract Al and Fe with hydrochloric acid. The high-efficiency polyaluminum iron chloride (PAFC) flocculant was prepared via adjusting the pH of the leaching solution, the molar ratio of aluminum and iron, and the polymerization temperature. The effect of synthesis and flocculation conditions on the flocculation performance of aged landfill leachate was investigated. The results confirmed that the PAFC prepared at the polymerization pH of 2.5, the Al/Fe molar ratio of 8, and the polymerization temperature of 70 °C had the optimum flocculation effect. The flocculation consequences of PAFC and commercial polyaluminum iron chloride flocculant (CPAFC) under different flocculation conditions were compared. The chemical oxygen demand (COD), UV254, chroma and settlement height of PAFC at flocculant concentration of 60 g/L and solution pH of 6 were 72.2%, 79.2%, 82.9% and 9.5 cm (within 90 min), respectively. PAFC has excellent flocculation performance and can be used as a simple, potentially low-cost wastewater treatment agent in industrial applications.


Materials ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2068 ◽  
Author(s):  
Yusuke Yabara ◽  
Seiichiro Izawa ◽  
Masahiro Hiramoto

In this study, the operation of donor/acceptor photovoltaic cells fabricated on homoepitaxially grown p-doped rubrene single-crystal substrates is demonstrated. The photocurrent density is dominated by the sheet conductivity (σ□) of the p-type single-crystal layer doped to 100 ppm with an iron chloride (Fe2Cl6) acceptor. A 65 μm thick p-type rubrene single-crystal substrate is expected to be required for a photocurrent density of 20 mA·cm−2. An entire bulk doping technique for rubrene single crystals is indispensable for the fabrication of practical organic single-crystal solar cells.


Sign in / Sign up

Export Citation Format

Share Document