Jet-gas interactions at crucial jet power for feedback

AbstractMost X-ray studies of radio-mode feedback have concentrated on locally-abundant low-power radio sources in relatively rich cluster environments. But the scaling found between mechanical and radiative power, when combined with the radio luminosity function, means that half of the heating in the local Universe is expected from higher-power sources, which lie within a factor of about three of the FRI/II transition, and these sources encounter a wide range of atmosphere properties. We summarize what is observed at FRI/II transition powers from a complete sample observed with modest Chandra exposure times. We then discuss two systems with deep Chandra data. In one we find that the work done in driving shocks exceeds that in evacuating cavities. This source also displays a remarkable jet-cloud interaction, and revealing hotspot X-ray emission. In the second we find evidence of radio-emitting plasma running along boundaries between gas of different temperature, apparently lubricating the gas flows and inhibiting heat transfer, and itself being heavily structured by the process.

Download Full-text

The intermediate-power population of radio galaxies: morphologies and interactions

Proceedings of the International Astronomical Union ◽

10.1017/s1743921319003533 ◽

2018 ◽

Vol 14 (A30) ◽

pp. 90-93

Author(s):

Diana M. Worrall ◽

Ryan T. Duffy ◽

Mark Birkinshaw

Keyword(s):

Luminosity Function ◽

Full Range ◽

Radio Galaxies ◽

Power Sources ◽

X Ray ◽

Power Injection ◽

Work Done ◽

The Universe ◽

Radio Luminosity Function ◽

Radio Power

AbstractRadio galaxies of intermediate power dominate the radio-power injection in the Universe as a whole, due to the break in the radio luminosity function, and so are of special interest. The population spans FR I, FR II, and hybrid morphologies, resides in a full range of environmental richness, and sources of all ages are amenable to study. We describe structures and interactions, with emphasis on sources with deep high-resolution Chandra X-ray data. As compared with low-power sources there is evidence that the physics changes, and the work done in driving shocks can exceed that in evacuating cavities. A range of morphologies and phenomena is identified.

Download Full-text

Counterfeit Parts Recognition and Detection for Failure Analysts

ISTFA 2010: Conference Proceedings from the 36th International Symposium for Testing and Failure Analysis ◽

10.31399/asm.cp.istfa2010p0364 ◽

2010 ◽

Author(s):

Katherine V. Whittington

Keyword(s):

Thermal Cycle ◽

Visual Inspection ◽

Acoustic Microscopy ◽

Scanning Acoustic Microscopy ◽

3D Measurement ◽

X Ray ◽

Wide Range ◽

Electronic Parts ◽

Testing Awareness

Abstract The electronics supply chain is being increasingly infiltrated by non-authentic, counterfeit electronic parts, whose use poses a great risk to the integrity and quality of critical hardware. There is a wide range of counterfeit parts such as leads and body molds. The failure analyst has many tools that can be used to investigate counterfeit parts. The key is to follow an investigative path that makes sense for each scenario. External visual inspection is called for whenever the source of supply is questionable. Other methods include use of solvents, 3D measurement, X-ray fluorescence, C-mode scanning acoustic microscopy, thermal cycle testing, burn-in technique, and electrical testing. Awareness, vigilance, and effective investigations are the best defense against the threat of counterfeit parts.

Download Full-text

Preparation of Synthetic Zeolites from Coal Fly Ash by Hydrothermal Synthesis

Materials ◽

10.3390/ma14051267 ◽

2021 ◽

Vol 14 (5) ◽

pp. 1267

Author(s):

David Längauer ◽

Vladimír Čablík ◽

Slavomír Hredzák ◽

Anton Zubrik ◽

Marek Matik ◽

...

Keyword(s):

Fly Ash ◽

Coal Combustion ◽

Power Plants ◽

Coal Fly Ash ◽

Thermal Power ◽

Product Analysis ◽

Coal Combustion Products ◽

X Ray ◽

Wide Range ◽

Silica Alumina

Large amounts of coal combustion products (as solid products of thermal power plants) with different chemical and physical properties cause serious environmental problems. Even though coal fly ash is a coal combustion product, it has a wide range of applications (e.g., in construction, metallurgy, chemical production, reclamation etc.). One of its potential uses is in zeolitization to obtain a higher added value of the product. The aim of this paper is to produce a material with sufficient textural properties used, for example, for environmental purposes (an adsorbent) and/or storage material. In practice, the coal fly ash (No. 1 and No. 2) from Czech power plants was firstly characterized in detail (X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDX), particle size measurement, and textural analysis), and then it was hydrothermally treated to synthetize zeolites. Different concentrations of NaOH, LiCl, Al2O3, and aqueous glass; different temperature effects (90–120 °C); and different process lengths (6–48 h) were studied. Furthermore, most of the experiments were supplemented with a crystallization phase that was run for 16 h at 50 °C. After qualitative product analysis (SEM-EDX, XRD, and textural analytics), quantitative XRD evaluation with an internal standard was used for zeolitization process evaluation. Sodalite (SOD), phillipsite (PHI), chabazite (CHA), faujasite-Na (FAU-Na), and faujasite-Ca (FAU-Ca) were obtained as the zeolite phases. The content of these zeolite phases ranged from 2.09 to 43.79%. The best conditions for the zeolite phase formation were as follows: 4 M NaOH, 4 mL 10% LiCl, liquid/solid ratio of 30:1, silica/alumina ratio change from 2:1 to 1:1, temperature of 120 °C, process time of 24 h, and a crystallization phase for 16 h at 50 °C.

Download Full-text

Multidimensional Ln-Aminophthalate Photoluminescent Coordination Polymers

Materials ◽

10.3390/ma14071786 ◽

2021 ◽

Vol 14 (7) ◽

pp. 1786

Author(s):

Carla Queirós ◽

Chen Sun ◽

Ana M. G. Silva ◽

Baltazar de Castro ◽

Juan Cabanillas-Gonzalez ◽

...

Keyword(s):

Water Content ◽

Coordination Polymers ◽

Metal Ion ◽

Low Cost ◽

Microwave Assisted Synthesis ◽

X Ray Diffraction ◽

X Ray ◽

Wide Range ◽

Ft Ir ◽

Ft Ir Spectroscopy

The development of straightforward reproducible methods for the preparation of new photoluminescent coordination polymers (CPs) is an important goal in luminescence and chemical sensing fields. Isophthalic acid derivatives have been reported for a wide range of applications, and in addition to their relatively low cost, have encouraged its use in the preparation of novel lanthanide-based coordination polymers (LnCPs). Considering that the photoluminescent properties of these CPs are highly dependent on the existence of water molecules in the crystal structure, our research efforts are now focused on the preparation of CP with the lowest water content possible, while considering a green chemistry approach. One- and two-dimensional (1D and 2D) LnCPs were prepared from 5-aminoisophthalic acid and Sm3+/Tb3+ using hydrothermal and/or microwave-assisted synthesis. The unprecedented LnCPs were characterized by single-crystal X-ray diffraction (SCRXD), powder X-ray diffraction (PXRD), Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM), and their photoluminescence (PL) properties were studied in the solid state, at room temperature, using the CPs as powders and encapsulated in poly(methyl methacrylate (PMMA) films, envisaging the potential preparation of devices for sensing. The materials revealed interesting PL properties that depend on the dimensionality, metal ion, co-ligand used and water content.

Download Full-text

Synthesis and Advanced Characterization of Polymer-Protein Core-Shell Nanoparticles

Catalysts ◽

10.3390/catal11060730 ◽

2021 ◽

Vol 11 (6) ◽

pp. 730

Author(s):

Erik Sarnello ◽

Tao Li

Keyword(s):

Particle Size ◽

Small Angle ◽

Core Shell ◽

Assembly Process ◽

Shell Nanoparticles ◽

X Ray ◽

X Ray Scattering ◽

Wide Range ◽

Core Shell Nanoparticles ◽

Ray Scattering

Enzyme immobilization techniques are widely researched due to their wide range of applications. Polymer–protein core–shell nanoparticles (CSNPs) have emerged as a promising technique for enzyme/protein immobilization via a self-assembly process. Based on the desired application, different sizes and distribution of the polymer–protein CSNPs may be required. This work systematically studies the assembly process of poly(4-vinyl pyridine) and bovine serum albumin CSNPs. Average particle size was controlled by varying the concentrations of each reagent. Particle size and size distributions were monitored by dynamic light scattering, ultra-small-angle X-ray scattering, small-angle X-ray scattering and transmission electron microscopy. Results showed a wide range of CSNPs could be assembled ranging from an average radius as small as 52.3 nm, to particles above 1 µm by adjusting reagent concentrations. In situ X-ray scattering techniques monitored particle assembly as a function of time showing the initial particle growth followed by a decrease in particle size as they reach equilibrium. The results outline a general strategy that can be applied to other CSNP systems to better control particle size and distribution for various applications.

Download Full-text

Problems of Powering End Devices in Wireless Networks of the Internet of Things

Energies ◽

10.3390/en14092417 ◽

2021 ◽

Vol 14 (9) ◽

pp. 2417

Author(s):

Andrzej Michalski ◽

Zbigniew Watral

Keyword(s):

Wireless Sensor Networks ◽

Sensor Networks ◽

Internet Of Things ◽

Radio Frequency Identification ◽

Wireless Sensor ◽

Alternative Possibilities ◽

The Internet ◽

Power Sources ◽

Wide Range ◽

The Internet Of Things

This article presents the problems of powering wireless sensor networks operating in the structures of the Internet of Things (IoT). This issue was discussed on the example of a universal end node in IoT technology containing RFID (Radio Frequency Identification) tags. The basic methods of signal transmission in these types of networks are discussed and their impact on the basic requirements such as range, transmission speed, low energy consumption, and the maximum number of devices that can simultaneously operate in the network. The issue of low power consumption of devices used in IoT solutions is one of the main research objects. The analysis of possible communication protocols has shown that there is a possibility of effective optimization in this area. The wide range of power sources available on the market, used in nodes of wireless sensor networks, was compared. The alternative possibilities of powering the network nodes from Energy Harvesting (EH) generators are presented.

Download Full-text

AGN1 vs AGN2 dichotomy as seen from the point of view of ionized outflows

Proceedings of the International Astronomical Union ◽

10.1017/s1743921320002677 ◽

2019 ◽

Vol 15 (S356) ◽

pp. 96-96

Author(s):

Eleonora Sani

Keyword(s):

Accretion Rate ◽

Point Of View ◽

Emission Lines ◽

Black Hole Mass ◽

X Ray ◽

Bolometric Luminosity ◽

Wide Range ◽

Strong Contrast

AbstractI present a detailed study of ionized outflows in a large sample of 650 hard X-ray detected AGN. Taking advantage of the legacy value of the BAT AGN Spectroscopic Survey (BASS, DR1), we are able to reveal the faintest wings of the [OIII] emission lines associated with outflows. The sample allows us to derive the incidence of outflows covering a wide range of AGN bolometric luminosity and test how the outflow parameters are related with various AGN power tracers, such as black hole mass, Eddington ratio, luminosity. I’ll show how ionized outflows are more frequently found in type 1.9 and type 1 AGN (50% and 40%) with respect to the low fraction in type 2 AGN (20%). Within such a framework, I’ll demonstrate how type 2 AGN outflows are almost evenly balanced between blue- and red-shifted winds. This, in strong contrast with type 1 and type 1.9 AGN outflows which are almost exclusively blue-shifted. Finally, I’ll prove how the outflow occurrence is driven by the accretion rate, whereas the dependence of outflow properties with respect to the other AGN power tracers happens to be quite mild.

Download Full-text

Towards a methodology for the characterisation of the fabric of wet clays using X-ray scattering

E3S Web of Conferences ◽

10.1051/e3sconf/20199201005 ◽

2019 ◽

Vol 92 ◽

pp. 01005

Author(s):

Georgios Birmpilis ◽

Reza Ahmadi-Naghadeh ◽

Jelke Dijkstra

Keyword(s):

Materials Science ◽

Measurement Techniques ◽

Invasive Technique ◽

Colloidal Systems ◽

Characteristic Distance ◽

X Ray ◽

Hydrophobic Coating ◽

X Ray Scattering ◽

Wide Range ◽

Ray Scattering

X-ray scattering is a promising non-invasive technique to study evolving nano- and micromechanics in clays. This study discusses the experimental considerations and a successful method to enable X-ray scattering to study clay samples at two extreme stages of consolidation. It is shown that the proposed sample environment comprising flat capillaries with a hydrophobic coating can be used for a wide range of voids ratios ranging from a clay suspension to consolidated clay samples, that are cut from larger specimens of reconstituted or natural clay. The initial X-ray scattering results using a laboratory instrument indicate that valuable information on, in principal evolving, clay fabric can be measured. Features such as characteristic distance between structural units and particle orientations are obtained for a slurry and a consolidated sample of kaolinite. Combined with other promising measurement techniques from Materials Science the proposed method will help advance the contemporary understanding on the behaviour of dense colloidal systems of clay, as it does not require detrimental sample preparation

Download Full-text

Improvement of the Detection Sensitivity of Edxrf Trace Element Analysis by Means of Efficient X-Ray Focusing Based on Strongly Curved Hopg Crystals

Advances in X-ray Analysis ◽

10.1154/s0376030800022515 ◽

1995 ◽

Vol 39 ◽

pp. 109-117

Author(s):

Burkhard Beckhoff ◽

Birgit Kanngießer

Keyword(s):

High Intensity ◽

Focal Plane ◽

Bragg Reflection ◽

Pyrolytic Graphite ◽

Trace Element Analysis ◽

Detection Sensitivity ◽

Element Analysis ◽

X Ray ◽

Wide Range ◽

Very High

X-ray focusing based on Bragg reflection at curved crystals allows collection of a large solid angle of incident radiation, monochromatization of this radiation, and condensation of the beam reflected at the crystal into a small spatial cross-section in a pre-selected focal plane. Thus, for the Bragg reflected radiation, one can achieve higher intensities than for the radiation passing directly to the same small area in the focal plane. In that case one can profit considerably from X-ray focusing in an EDXRF arrangement. The 00 2 reflection at Highly Oriented Pyrolytic Graphite (HOPG) crystals offers a very high intensity of the Bragg reflected beam for a wide range of photon energies. Furthermore, curvature radii smaller than 10 mm can be achieved for HOPG crystals ensuring efficient X-ray focusing in EDXRF applications. For the trace analysis of very small amounts of specimen material deposited on small areas of thin-filter backings, HOPG based X-ray focusing may be used to achieve a very high intensity of monochromatic excitation radiation.

Download Full-text

Non-invasive sensing for food reassurance

The Analyst ◽

10.1039/c5an02152a ◽

2016 ◽

Vol 141 (5) ◽

pp. 1587-1610 ◽

Cited By ~ 23

Author(s):

Zou Xiaobo ◽

Huang Xiaowei ◽

Malcolm Povey

Keyword(s):

Chemical Composition ◽

Physicochemical Properties ◽

Food Quality ◽

Physical Principle ◽

Quality Traits ◽

X Ray ◽

Main Food ◽

Non Invasive ◽

Wide Range ◽

Nutritional Characteristics

The main food quality traits of interest using non-invasive sensing techniques are sensory characteristics, chemical composition, physicochemical properties, health-protecting properties, nutritional characteristics and safety. A wide range of non-invasive sensing techniques, from optical, acoustical, electrical, to nuclear magnetic, X-ray, biosensor, microwave and terahertz, are organized according to physical principle.

Download Full-text