scholarly journals Utilization of community forest wood harvesting waste in Bone Pute Village, Burau District, East Luwu Regency

2021 ◽  
Vol 886 (1) ◽  
pp. 012021
Author(s):  
Nurdin Dalya ◽  
Wahyuni ◽  
Andi Vika Faradiba Muin
Keyword(s):  
Descriptive Analysis ◽  
Wood Waste ◽  
Raw Material ◽  
Average Volume ◽  
Community Forests ◽  
Wood Harvesting ◽  
Rotten Wood ◽  
Qualitative Descriptive ◽  
Community Data ◽  
Harvesting Process

Abstract Timber in community forests can be utilized by the community by first removing it from the forest through the harvesting process. The harvesting process carried out has the potential for waste to be generated. This study aims to analyze the characteristics and potential of harvesting waste and develop alternative uses of waste into products that can be utilized by the community. Data were collected through field observations and making sample plots by purposive sampling on logging plots, skidding paths, plots on TPn, and plots on TPK. Analysis of the data used to determine the characteristics of the waste and its alternative uses, namely qualitative descriptive analysis and calculating the volume of waste using the Brereton empirical formula. The results showed that the characteristics of the wood waste found consisted of stump waste, branch-free stem waste with physical defects, twigs, short pieces, broken wood, and rotten wood. The potential logging waste that can be utilized is in the good category with an average volume of 1.56 m3 in the form of the stump, 2.85 m3 per log in the form of branch-free stems, and 2.45 m3 per log in the form of shortcuts. Alternative utilization of harvesting waste is based on the calculated characteristics and potential, waste can be used as firewood, waste with a diameter of 10 cm and above can be used as raw material for chips, boxes, and poles. Wood waste can also be utilized by the particleboard, fiberboard, finger-joint board, laminated board, pulp, and wood charcoal and charcoal briquette industries if the availability of raw waste materials is sustainable and in sufficient quantities.

scholarly journals Marketing Strategy for Chinese Market to Increase Room Occupancies at The Plataran Ubud Hotel

2021 ◽  
Vol 7 (1) ◽  
pp. 50
Author(s):  
I Ketut Muliadiasa ◽  
Ni Putu Isha Aprinica
Keyword(s):  
Marketing Strategy ◽  
Swot Analysis ◽  
Descriptive Analysis ◽  
Occupancy Rate ◽  
Chinese Market ◽  
Analysis Technique ◽  
Qualitative Descriptive ◽  
Chinese Tourists ◽  
Community Data ◽  
The Right

Nowadays, Chinese tourists dominate Indonesian tourism, an increase in the number of Chinese tourists visiting Bali is quite significant every year. The marketing method that focuses on the Chinese market is still not maximized. This is evidenced by a decrease in the number of Chinese tourists visits. Even now the room occupancy rate targeted by Plataran Hotel Ubud has not yet reached the desired target. The urgency of this research is a degradation in the volume of sales of rooms at Hotel Plataran Ubud, which causes a derivation in the quantity of tourist visits which results in a decrease in employment for the community. Data collection techniques used were observation, interviews, document studies and questionnaires. The data analysis technique is using qualitative descriptive analysis, IFAS EFAS and SWOT analysis. The results of this study are to produce the right marketing strategy used in increasing the sales volume of hotel rooms at the Ubud Plataran Hotel.

scholarly journals ANALISIS SISTEM INFORMASI AKUNTANSI PEMBELIAN BAHAN BAKU SECARA TUNAI GUNA MENINGKATKAN EFEKTIVITAS PENGENDALIAN INTERN PADA PT. DWI MULYO LESTARI MADIUN

2012 ◽  
Vol 1 (1) ◽  
pp. 77
Author(s):  
Fefi Wuri Ambarwati ◽  
Isharijadi Isharijadi
Keyword(s):  
Internal Control ◽  
Descriptive Analysis ◽  
Raw Material ◽  
Dual Function ◽  
Basic Principles ◽  
Qualitative Descriptive ◽  
Principles Of Design

<span>This study evaluates the raw material purchasing system are applied in PT. Mulyo Dwi Lestari in order to enhance the effectiveness of internal control. The data was collected using interview and observation techniques. The analysis conducted is qualitative descriptive analysis. Based on the research that has been done, researchers can take the conclusion that the implementation of raw material purchasing system in the PT. Mulyo Dwi Lestari not support the effectiveness of internal control. The weaknesses include there isn’t form of purchase orders, goods receiving report form is not suitable with the basic principles of design, a dual function in the barn, yet numbered printed form, and never made a sudden inspection of the accounting records company's physical wealth.</span>

MOTIF YANG BERPENGARUH PADA PROSES KEJIWAAN TOKOH SAM DALAM NOVEL SEBENING SYAHADAT KARYA DIVA SR

2020 ◽  
Vol 8 (2) ◽  
pp. 10
Author(s):  
Dandy Ashghor Dawudi ◽  
Kamidjan Kamidjan ◽  
Agus Sulton
Keyword(s):  
Research Method ◽  
Descriptive Analysis ◽  
Research Process ◽  
Cultural Factors ◽  
Qualitative Approach ◽  
Literature Study ◽  
Love Story ◽  
True Value ◽  
Analysis Technique ◽  
Qualitative Descriptive

This research takes the object of Sebening Syahadat by Diva SR, this work is a novel that tells the story of the journey ofa teenager named Sam who is in the process ofsearching for identity. The journey is filled with interesting twits and turns embelissed with a love story that is very suitable if consumed by the younger generation who are learning to find identit. This study aims to reveal the value motives that led Sam’s character in finding his identity, which expected to be a material for reflection for readers, especially young people who are in the process of discovering his identity, the scope of the problem in this study is to reveal the value motives that affect the character’s psyche. Sam is told to have a rascal character.The research method used in this study took a descriptive qualitative approach, data colletion used was a literature study technique with stages of reading, note taking, coding for futher analysis. The analysis technique used is qualitative descriptive analysis technique.The result of the research in this research process indicate that the mental process of Sam’s character influenced by several factors, including: a. Motives in cultural factors (Situasional Factors), b. The motive for love begins with admiration for the attitude of someone who is full of noble values of character, c. The motive of curiosity and fulfillment of his needs for true value.

Politeness Strategies and Social Dimensions in Once Upon A Time Season 1 Movie Series: Sociopragmatics Study

2018 ◽  
Vol 3 (1) ◽  
pp. 18-25
Author(s):  
HENDAR HENDAR ◽  
BUNGA GALUH ANDRETTA TRISNANDI
Keyword(s):  
Social Distance ◽  
Descriptive Analysis ◽  
Social Dimension ◽  
Analysis Method ◽  
Social Dimensions ◽  
Social Distance Scale ◽  
Politeness Strategies ◽  
The Face ◽  
Qualitative Descriptive ◽  
Research Show

The purposes of this research are to find out the types of politeness strategies used to save the face of the characters in Once Upon A Time season 1 and to identify the dominant scale of social dimensions when using politeness strategies in Once Upon A Time season 1. This research uses qualitative-descriptive analysis method and to get the data needed in this research the writer did the following steps: watching the movies, transcribing the speech, searching the data, classifying the data, analyzing the data and drawing a conclusion related to the types of politeness strategies and the dominant scale of social dimensions. The source of the data used is taken from the serial film Once Upon A Time season 1 by Edward Kitsis dan Adam Horowitz. The results of this research show that there are four types of politeness strategies found in the serial film Once Upon A Time season 1. They are 10 data of bald on-record (28,6%), 8 data of positive politeness strategies (22,9%), 13 data of negative politeness strategies (37,1%) and 4 data of off-record consists (11,4%) and the most dominant scale of four social dimension scales is social distance scale 14 data (40%).

PENGEMBANGAN MEDIA PEMBELAJARAN INTERAKTIF TEKNIK PEMESINAN BUBUT

2020 ◽  
Vol 6 (2) ◽  
pp. 169
Author(s):  
Philip Nababan ◽  
Efendi Napitupulu ◽  
R Mursid
Keyword(s):  
Student Learning ◽  
Learning Outcomes ◽  
Interactive Learning ◽  
Descriptive Analysis ◽  
Student Learning Outcomes ◽  
Field Trials ◽  
Student Responses ◽  
Analysis Techniques ◽  
Qualitative Descriptive

Abstrak: Penelitian ini bertujuan untuk: (1) Mengetahui tanggapan siswa terhadap kualitas media pembelajaran interaktif pada pembelajaran Teknik Pemesinan Bubut. (2) Mengetahui keefektifan media pembelajaran interaktif pada pembelajaran Teknik Pemesinan Bubut pada siswa program keahlian Teknik Pemesinan. Jenis penelitian ini adalah penelitian pengembangan. Data tentang kualitas produk pengembangan ini dikumpulkan dengan angket dan dianalisis dengan teknik analisis deskriptif kualiatatif. Hasil penelitian menunjukkan bahwa; (1) uji ahli materi pelajaran Teknik Pemesinan Bubut berada pada kualifikasi sangat baik (88,92%), (2) uji ahli desain pembelajaran berada pada kualifikasi sangat baik (85,21%), (3) uji ahli rekayasa perangkat lunak berada pada kualifikasi sangat baik (84,03%), (4) uji coba perorangan berada pada kualifikasi sangat baik (88,75%), (5) uji coba kelompok kecil berada pada kualifikasi sangat baik (91,35%) dan (5) uji coba lapangan berada pada kualifikasi sangat baik (88,31%). Hasil pengujian hipotesis membuktikan bahwa terdapat perbedaan antara hasil belajar siswa yang menggunakan media pembelajaran interaktif  dengan hasil belajar siswa yang menggunakan buku teks. Hal ini ditunjukkan dengan hasil pengolahan data diperoleh  thitung sebesar 4,68 dan ttabel sebesar 1,67 pada taraf kepercayaan 95 persen. Maka diperoleh bahwa thitung> ttabel. Disimpulkan bahwa  hasil belajar siswa yang menggunakan media pembelajaran interaktif dengan efektifitas sebesar 72,77 %. lebih tinggi dari hasil belajar siswa yang diajar dengan pembelajaran menggunakan buku teks dengan efektifitas sebesar 62,13%. Kata Kunci: media pembelajaran interaktif, teknik pemesinan bubut Abstract: This study aims to: (1) Determine student responses to the quality of interactive learning media on learning Lathe Machining Techniques. (2) Knowing the effectiveness of interactive learning media on learning of Machining Lathe in students of Machining Engineering expertise program. This type of research is development research. Data about the quality of this development product was collected by a questionnaire and analyzed by qualitative descriptive analysis techniques. The results showed that; (1) Lathe machining engineering subject matter expert test is in very good qualification (88.92%), (2) learning design expert test is in very good qualification (85.21%), (3) software engineering expert test is in in very good qualifications (84.03%), (4) individual trials were in very good qualifications (88.75%), (5) small group trials were in very good qualifications (91.35%) and (5 ) field trials are in very good qualifications (88.31%). Hypothesis testing results prove that there are differences between student learning outcomes using interactive learning media with student learning outcomes using textbooks. This is indicated by the results of data processing obtained by tcount of 4.68 and ttable of 1.67 at a confidence level of 95 percent. Then it is obtained that tcount> ttable. It was concluded that student learning outcomes using interactive learning media with an effectiveness of 72.77%. higher than student learning outcomes taught by learning to use textbooks with an effectiveness of 62.13%. Keywords: interactive learning media, lathe machining techniques

Exploration of Creative Thinking Skills of Students in Physics Learning

2020 ◽  
Vol 6 (2) ◽  
pp. 151
Author(s):  
Muhammad Asriadi ◽  
Edi Istiyono
Keyword(s):  
High School Students ◽  
Creative Thinking ◽  
Descriptive Analysis ◽  
Thinking Skills ◽  
School Students ◽  
Cross Sectional ◽  
Physics Learning ◽  
Thinking Ability ◽  
Qualitative Descriptive ◽  
Creative Thinking Ability

This study aims to determine the ability of creative thinking high school students in physics learning, know the form of assessment of creative thinking abilities. The study was conducted at SMAN 6 Yogyakrata. This type of research is a survey with a cross-sectional method that is a survey conducted once and at a time. The subjects were the principals, teachers of physics from SMAN 6 Yogyakrata and 30 grade XI students. observations, interviews, and questionnaires were used as data collection techniques. The data analysis method used was the quantitative-qualitative descriptive analysis. The results showed that the creative thinking ability of class XI MIA 1 students at SMAN 6 Yogyakarta can be said to be in the average and quite good category, although there are some students whose level of creative thinking ability is low. In addition, the form of assessment used by physics teachers has not been effective and accurate enough in assessing students 'creative thinking abilities. So it is recommended to use The Torrance Tests of Creative Thinking (TTCT) in physics learning because it has been proven to be accurate in assessing students' creative thinking abilities.

Peningkatan Kemampuan Guru dalam Menyusun RPP Berbasis Karakter melalui Pendekatan Supervisi Kalaboratif Di SDN 07 Situjuah Gadang Kecamatan Situjuah Limo Nagari

2020 ◽  
Vol 5 (1) ◽  
pp. 17
Author(s):  
Ridwan Ridwan
Keyword(s):  
Learning Process ◽  
Teaching And Learning ◽  
Action Observation ◽  
Descriptive Analysis ◽  
Lesson Plans ◽  
Research Procedure ◽  
Qualitative Descriptive ◽  
The Subject ◽  
Class Teacher ◽  
Planning Action

<span lang="EN-US">The success of teaching and learning activities can be known from the results of teacher performance in preparing character-based lesson plans and implementing them in the teaching and learning process in class. This school action research aims to see whether there is an increase in the ability of teachers in developing character-based lesson plans and their implementation in teaching and learning process. This research uses 2 cycles. The research procedure has four stages of activities</span><span lang="IN"> are</span><span lang="EN-US">, planning, action, observation and evaluation</span><span lang="IN">,</span><span lang="EN-US"> and reflecting. The study was conducted at SDN 07 Situjuah Gadang. The subject of the research is the class teacher and subject teacher, which totals 7 </span><span lang="IN">teachers.</span><span lang="EN-US"> Data processing using qualitative descriptive analysis techniques.</span><span lang="EN-US">Based on the results of data analysis that has been stated, that the data obtained from observing the ability of teachers to prepare character-based lesson plans in cycle I and cycle II there is an increase in the ability of teachers in preparing character-based lesson plans.</span>

STABILITAS HARGA IKAN DI KOTA AMBON MELALUI PERAN COLD STORAGE, OPTIMASI PRODUKSI DAN EFISIENSI TEKNIS

2018 ◽  
Vol 2 (2) ◽  
pp. 74-84
Author(s):  
Stevanus Marelly Siahainenia ◽  
Dionisius Bawole ◽  
Eygner Gerald Talakua
Keyword(s):  
Cold Storage ◽  
Secondary Data ◽  
Raw Material ◽  
Primary Data ◽  
Survey Method ◽  
Production Factors ◽  
Flying Fish ◽  
Qualitative Descriptive ◽  
Installed Capacity ◽  
Space Capacity

The purpose of this study was to find out the function of cold storage in stabilizing fish prices in Ambon City, analyzing optimal production levels of various types of dominant fish, and analyzing the level of efficiency of utilization of cold storage and auxiliary machinery. This study uses the survey method. Primary data collection through questionnaires is built empirically while secondary data is obtained from several agencies related to this study. The research sample was drawn by exhausting sampling, amounting to 6 cold storage units in Ambon City. The role of cold storage to stabilize fish prices was analyzed using a qualitative descriptive approach, while the quantitative techniques used included analysis of optimization of cold storage production with linear programming and analysis of the efficiency of utilization of cold storage. The results of the study show that cold storage has not played a role properly to stabilize fish prices in Ambon City. To achieve optimal use of production factors, the cold storage management needs to reduce the raw material by 24,915.9 kg / month; 7 HOK / month workforce; cold storage storage space capacity of 2.09 kg / month; and demand for flying fish 1,402.6 kg / month, while the use of production factors efficiently (fully utulized) is the capacity of the freezing machine, demand for tuna, skipjack, and cob. The level of technical efficiency of the utilization of cold storage facilities is reached, the total use of installed capacity must be proportional to the capacity used.

Kebijakan Badan Narkotika Nasional Dalam Penanggulangan Narkoba Wilayah Perbatasan

2020 ◽  
Vol 3 (1) ◽  
pp. 20-31
Author(s):  
Novana Veronica Julenta Kareth ◽  
Reni Shintasari
Keyword(s):  
Central Government ◽  
Descriptive Analysis ◽  
Study Data ◽  
Eastern Region ◽  
Analysis Model ◽  
Literature Study ◽  
Qualitative Descriptive ◽  
Multi Stakeholder ◽  
Collection Methods

This paper aims to determine the policies implemented by the Papua National Narcotics Agency against drug trafficking. This article is a qualitative descriptive study. Data collection methods through interviews and literature study. Data analysis using descriptive analysis model. The results showed that the role of BNN Papua is very central in the eastern region and the Indonesian border. The policies that have been planned by BNN with multi-stakeholder have been implemented, but the new modes adopted by the international network vary. The drug subscription policy cannot be carried out by one institution only, it needs to be supported by other government agencies and the community. The need for a serious role for the regional and central government in both preventive efforts and subscription programs in synergy with the Papua Provincial BNN.

scholarly journals Systematic review and bibliometric analysis of African anesthesia and critical care medicine research part II: a scientometric analysis of the 116 most cited articles

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Ulrick Sidney Kanmounye ◽  
Joel Noutakdie Tochie ◽  
Aimé Mbonda ◽  
Cynthia Kévine Wafo ◽  
Leonid Daya ◽  
...  
Keyword(s):  
Critical Care ◽  
South African ◽  
Web Of Science ◽  
Descriptive Analysis ◽  
World Journal ◽  
Critical Care Medicine ◽  
Scientometric Analysis ◽  
Medicine Research ◽  
Qualitative Descriptive ◽  
The Impact

Abstract Background Scientometrics is used to assess the impact of research in several health fields, including Anesthesia and Critical Care Medicine. The purpose of this study was to identify contributors to highly-cited African Anesthesia and Critical Care Medicine research. Methods The authors searched Web of Science from inception to May 4, 2020, for articles on and about Anesthesia and Critical Care Medicine in Africa with ≥2 citations. Quantitative (H-index) and qualitative (descriptive analysis of yearly publications and interpretation of document, co-authorship, author country, and keyword) bibliometric analyses were done. Results The search strategy returned 116 articles with a median of 5 (IQR: 3–12) citations on Web of Science. Articles were published in Anesthesia and Analgesia (18, 15.5%), World Journal of Surgery (13, 11.2%), and South African Medical Journal (8, 6.9%). Most (74, 63.8%) articles were published on or after 2013. Seven authors had more than 1 article in the top 116 articles: Epiu I (3, 2.6%), Elobu AE (2, 1.7%), Fenton PM (2, 1.7%), Kibwana S (2, 1.7%), Rukewe A (2, 1.7%), Sama HD (2, 1.7%), and Zoumenou E (2, 1.7%). The bibliometric coupling analysis of documents highlighted 10 clusters, with the most significant nodes being Biccard BM, 2018; Baker T, 2013; Llewellyn RL, 2009; Nigussie S, 2014; and Aziato L, 2015. Dubowitz G (5) and Ozgediz D (4) had the highest H-indices among the authors referenced by the most-cited African Anesthesia and Critical Care Medicine articles. The U.S.A., England, and Uganda had the strongest collaboration links among the articles, and most articles focused on perioperative care. Conclusion This study highlighted trends in top-cited African articles and African and non-African academic institutions’ contributions to these articles.

Sign in / Sign up

Export Citation Format

Share Document