Design and Development of an Instrument for Measurement of Biting Force in Human Beings

2012 ◽  
Author(s):  
Anand Vaz ◽  
Mayank Shekhar Jha ◽  
Rishi Seth ◽  
Ambuj Saxena
Keyword(s):  
Output Voltage ◽  
Electronic Circuit ◽  
Wheatstone Bridge ◽  
Strain Gauges ◽  
Human Beings ◽  
Design And Development ◽  
Digital Readout ◽  
Inner Surface ◽  
Main Component ◽  
Selection Of

The gnathodynamometer is a device meant for the measurement of biting force and the assessment of masticator performance. The devices reported in the literature have not been very convenient to use, and have often undergone modifications. In this paper, a systematic mechatronic approach has been followed in the design and development of a gnathodynamometer, to overcome reported inadequacies. The design problem imposes several constraints of size, access, loading, safety, hygiene, and so on. The gnathodynamometer developed in this work is designed for a maximum biting force of 600 N, and a maximum deflection of 1 mm. Design of the main component, which is the fork, has been elaborately explained. Strain gauges located at the root of the inner surface of each prong have been used to sense the strains arising due to the application of biting force. The complete electronic circuit has been designed. Readings of biting force are displayed on a digital readout. The circuit includes selection of strain gauges, design of Wheatstone bridge, preamplifier. The device is then calibrated and a relationship between applied biting force and output voltage is obtained.

scholarly journals Design of a CMOS readout circuit on ultra-thin flexible silicon chip for printed strain gauges

2017 ◽  
Vol 15 ◽  
pp. 123-130
Author(s):  
Mourad Elsobky ◽  
Yigit Mahsereci ◽  
Jürgen Keck ◽  
Harald Richter ◽  
Joachim N. Burghartz
Keyword(s):  
Circuit Design ◽  
Flexible Electronics ◽  
Strain Gauge ◽  
Output Voltage ◽  
High Performance ◽  
Wheatstone Bridge ◽  
Strain Gauges ◽  
Wearable Electronics ◽  
Readout Circuit ◽  
Interface Circuit

Abstract. Flexible electronics represents an emerging technology with features enabling several new applications such as wearable electronics and bendable displays. Precise and high-performance sensors readout chips are crucial for high quality flexible electronic products. In this work, the design of a CMOS readout circuit for an array of printed strain gauges is presented. The ultra-thin readout chip and the printed sensors are combined on a thin Benzocyclobutene/Polyimide (BCB/PI) substrate to form a Hybrid System-in-Foil (HySiF), which is used as an electronic skin for robotic applications. Each strain gauge utilizes a Wheatstone bridge circuit, where four Aerosol Jet® printed meander-shaped resistors form a full-bridge topology. The readout chip amplifies the output voltage difference (about 5 mV full-scale swing) of the strain gauge. One challenge during the sensor interface circuit design is to compensate for the relatively large dc offset (about 30 mV at 1 mA) in the bridge output voltage so that the amplified signal span matches the input range of an analog-to-digital converter (ADC). The circuit design uses the 0. 5 µm mixed-signal GATEFORESTTM technology. In order to achieve the mechanical flexibility, the chip fabrication is based on either back thinned wafers or the ChipFilmTM technology, which enables the manufacturing of silicon chips with a thickness of about 20 µm. The implemented readout chip uses a supply of 5 V and includes a 5-bit digital-to-analog converter (DAC), a differential difference amplifier (DDA), and a 10-bit successive approximation register (SAR) ADC. The circuit is simulated across process, supply and temperature corners and the simulation results indicate excellent performance in terms of circuit stability and linearity.

CONTEMPORARY ASPECTS IN THE SELECTION OF TOOLS AND TECHNOLOGIES FOR DEVELOPING WEB SITES

2018 ◽  
pp. 125-131
Author(s):  
Petar Halachev ◽  
Aleksandra Todeva ◽  
Gergana Georgieva ◽  
Marina Jekova
Keyword(s):  
Programming Languages ◽  
Web Sites ◽  
Web Site ◽  
Work Process ◽  
Design And Development ◽  
Site Development ◽  
Complicated Process ◽  
The Creation ◽  
Guidelines And Recommendations ◽  
Selection Of

he report explores and analyzes the application of the most popular programming languages from different organizations: GitHub; Stackoverflow; the TIOBE's Community index. The main client technologies: HTML; CSS; JavaScript; Typescript are presented and analysed. Features are characterized and the advantages and the disadvantages of the server technologies are described: Java; PHP; Python; Ruby. The application areas for web site development technologies have been defined. The creation of a quality web site is a complex and complicated process, but by observing some guidelines and recommendations in the work process can help to select the tools and the technologies in its design and development.

Study on the "Phase Hopping" AC-AC Frequency Conversion Method with Approximately Continuous Frequencies

2020 ◽  
Vol 13 (8) ◽  
pp. 1217-1226
Author(s):  
Zhengwang Xu ◽  
Guozhuang Jiang ◽  
Ke Kun ◽  
Yuchun Yi
Keyword(s):  
Output Voltage ◽  
Frequency Conversion ◽  
Frequency Control ◽  
Actual Application ◽  
Power Frequency ◽  
Voltage Frequency ◽  
The Law ◽  
Large Cycle ◽  
Selection Of ◽  
Conversion Technology

Background: The output voltage frequency for the previously proposed "phase hopping" AC-AC frequency conversion technology is determined by the law that the number of output voltage cycles is reduced by one relative to the power frequency in a large cycle containing six jumps. According to the law, only a limited number of output frequencies, such as 37.5 Hz, 42.86 Hz and 45 Hz are found. Due to the large spacing between the output frequencies, the "phase hopping" frequency conversion technology is difficult to put into practical use. Methods: In this paper, the law of the output frequency control is generalized so that the number of output cycles in a large cycle is reduced by n relative to the power frequency. The analysis shows that the appropriate selection of large cycles, including the number of power frequency cycles and the value of n, can find more frequencies to be used. Reducing the interval between the output frequencies within 1Hz. Results: The analysis results were verified in simulation by MATLAB, and the harmonics and the feasibility of the actual application were analyzed. Conclusion: Finally, an experimental platform was built and an experimental analysis was carried out. The experimental results show that the theoretical and simulation analyses are correct.

scholarly journals Multiple-Criteria Decision-Making and Sensitivity Analysis for Selection of Materials for Knee Implant Femoral Component

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2084
Author(s):  
Raman Kumar ◽  
Rohit Dubey ◽  
Sehijpal Singh ◽  
Sunpreet Singh ◽  
Chander Prakash ◽  
...  
Keyword(s):  
Decision Making ◽  
Sensitivity Analysis ◽  
Femoral Component ◽  
Human Life ◽  
Multiple Criteria Decision Making ◽  
Multiple Criteria ◽  
Biomedical Science ◽  
Human Beings ◽  
Weighted Sum Method ◽  
Selection Of

Total knee replacement (TKR) is a remarkable achievement in biomedical science that enhances human life. However, human beings still suffer from knee-joint-related problems such as aseptic loosening caused by excessive wear between articular surfaces, stress-shielding of the bone by prosthesis, and soft tissue development in the interface of bone and implant due to inappropriate selection of TKR material. The choice of most suitable materials for the femoral component of TKR is a critical decision; therefore, in this research paper, a hybrid multiple-criteria decision-making (MCDM) tactic is applied using the degree of membership (DoM) technique with a varied system, using the weighted sum method (WSM), the weighted product method (WPM), the weighted aggregated sum product assessment method (WASPAS), an evaluation based on distance from average solution (EDAS), and a technique for order of preference by similarity to ideal solution (TOPSIS). The weights of importance are assigned to different criteria by the equal weights method (EWM). Furthermore, sensitivity analysis is conducted to check the solidity of the projected tactic. The weights of importance are varied using the entropy weights technique (EWT) and the standard deviation method (SDM). The projected hybrid MCDM methodology is simple, reliable and valuable for a conflicting decision-making environment.

Questions Collaborative Dexamethasone Trial

PEDIATRICS ◽  
1992 ◽  
Vol 89 (6) ◽  
pp. 1266-1266
Author(s):  
ROSAMOND JONES ◽  
ADRIAN GRANT ◽  
Keyword(s):  
Clinical Practice ◽  
Random Sample ◽  
Human Beings ◽  
Eligibility Criteria ◽  
Clinical Uncertainty ◽  
Trial Entry ◽  
Selection Of

In Reply.— We are glad to respond to Dr MacMahon's letter about the generalizability of the results of our trial. Basing trial entry on `clinical uncertainty' is actually one of the strengths of this trial.1 No trial can ever include a random sample of all human beings who meet the eligibility criteria; there is always selection of subjects (whatever the entry criteria). Inevitably, therefore, at some point there has to be a leap of faith from the evidence to clinical practice.2

Transducer for recording electrical and mechanical chronic intestinal activity

1976 ◽  
Vol 41 (6) ◽  
pp. 942-945 ◽  
Author(s):  
A. Lambert ◽  
R. Eloy ◽  
J. F. Grenier
Keyword(s):  
Electrical Activity ◽  
Wheatstone Bridge ◽  
Displacement Transducer ◽  
Intestinal Wall ◽  
Mechanical Activity ◽  
Strain Gauges ◽  
Mechanical Displacement ◽  
Electrical Potentials ◽  
Intestinal Activity ◽  
Long Duration

An extraluminal displacement transducer has been developed for simultaneously recording the mechanical activity in two perpendicular directions andthe electrical activity of the intestinal serosa. The length variations in two perpendicular directions were measured by means of strain gauges bounded on two pairs of lamellae embedded in a rigid stand. The electrical activity was recorded by means of four electrodes situated at the extremity of these lamellae. The electrical gauges of each pair of lamellae are connected to form a Wheatstone bridge. This device allows establishment of a correlation between the mechanical displacement of the intestinal wall serosa and electrical potentials by means of studies of long duration.

scholarly journals Communicative Approach in Teaching Students of Mining Specialties to Foreign Language Reading

2018 ◽  
Vol 41 ◽  
pp. 04042 ◽  
Author(s):  
Lyubov Fedyanina ◽  
Sergey Lebedintsev ◽  
Vyacheslav Gustov
Keyword(s):  
Foreign Language ◽  
Communicative Competence ◽  
Methodological Principle ◽  
Foreign Language Reading ◽  
Rational Learning ◽  
Textual Competence ◽  
Main Component ◽  
Goals And Objectives ◽  
Selection Of

This article is devoted to teaching foreign-language reading intended for students studying at the mining specialties of the higher mining school. The authors share with their practical and theoretical experience as well as innovative ideas for the development and construction of a level classification of testing task forms, in order to use them effectively in mining. It is well known that the achievement of the goals and objectives of the curriculum as well as rational learning by mining students and their interest in acquiring and using mining knowledge depend on properly selected test tasks. The main component of communicative competence is considered to be a textual competence, under which is understood as a set of mining knowledge and skills. The selection of testing tasks is based on the methodological principle from simple to complex. Testing tasks at different text levels help to overcome the difficulties taking place in the course of decoding mining information.

scholarly journals Selection of Coffea canephora parents from the botanical varieties Conilon and Robusta for the production of intervarietal hybrids

2018 ◽  
Vol 48 (4) ◽  
Author(s):  
Leilane Nicolino Lamarão de Oliveira ◽  
Rodrigo Barros Rocha ◽  
Fábio Medeiros Ferreira ◽  
Victor Mouzinho Spinelli ◽  
André Rostand Ramalho ◽  
...  
Keyword(s):  
Block Design ◽  
Original Data ◽  
Coffea Canephora ◽  
Reference Points ◽  
Hybrid Vigor ◽  
Botanical Variety ◽  
Randomized Block Design ◽  
Main Component ◽  
Botanical Varieties ◽  
Selection Of

ABSTRACT: The objective of this research was to quantify the genetic divergence of potential Coffea canephora parents, with the goal of developing progenies that associate the best traits of the Conilon and Robusta botanical varieties for hybrid vigor expression. Thus, 10 morphological and productive characteristics of 130 clones of Conilon and Robusta botanical varieties and their intervarietal hybrids were evaluated over 2 years. The experiment was conducted in a randomized block design with four replicates of four plants per plot. For selection of parents, the main component analysis was used to associate values with reference points obtained from the average of each botanical variety. The first two principal components allowed for the separation of the botanical varieties representing the variability contained in the original data with 76% for the first year and 69% for the second year. Although, the genotype × years interaction had significant effects, there were minor differences in the grouping from one year to the next, which is associated with the higher repeatability estimates observed in this study. It was observed that crosses with the 16-1-81I, 9-1-82L, and 13-1-61I parents of the botanical variety Robusta and the 167I, 890E, and 130I parents of the Conilon botanical variety presented greater potential for obtaining selection gains.

scholarly journals Carbon Valuation: Alternatives, Alternations and Lateral Measures?

2016 ◽  
Vol 4 (1) ◽  
pp. 67-91 ◽  
Author(s):  
Steffen Dalsgaard
Keyword(s):  
Carbon Emissions ◽  
Carbon Offsets ◽  
The Other ◽  
Science Literature ◽  
Carbon Markets ◽  
Human Beings ◽  
The Social ◽  
Social Science Literature ◽  
The One ◽  
Selection Of

This article refers to carbon valuation as the practice of ascribing value to, and assessing the value of, actions and objects in terms of carbon emissions. Due to the pervasiveness of carbon emissions in the actions and objects of everyday lives of human beings, the making of carbon offsets and credits offers almost unlimited repertoires of alternatives to be included in contemporary carbon valuation schemes. Consequently, the article unpacks how discussions of carbon valuation are interpreted through different registers of alternatives - as the commensuration and substitution of variants on the one hand, and the confrontational comparison of radical difference on the other. Through the reading of a wide selection of the social science literature on carbon markets and trading, the article argues that the value of carbon emissions itself depends on the construction of alternative, hypothetical scenarios, and that emissions have become both a moral and a virtual measure pitting diverse forms of actualised actions or objects against each other or against corresponding nonactions and non-objects as alternatives.

scholarly journals Judiciary and legal principles for the development of a profile for the profession of detectives of the National Police of Ukraine

2018 ◽  
Vol 68 (1) ◽  
pp. 50-55
Author(s):  
V. P. Ostapovich
Keyword(s):  
Professional Activity ◽  
Occupational Risk Factors ◽  
Legal Principles ◽  
Personal Qualities ◽  
Main Components ◽  
Main Component ◽  
National Police ◽  
Negative Factors ◽  
Theoretical Foundations ◽  
Selection Of

The author has studied the problem of the development of theoretical foundations and methodical tools for conducting job research within the National Police of Ukraine. The author has stated theoretical grounds of creating a profile for the profession of a detective; has revealed the possibilities of using some methods and means of job research for the development of modern profiles of the professions of the system of the National Police of Ukraine. It has been demonstrated that a profile of the profession as a set of parameters characterizing a successful specialist, a professional in a certain field of professional activity, is an important component of the job description. The main component of the profile is the characteristic of psychological peculiarities of professional activity.On the basis of experimental research, the author has formulated the requirements of the profession to the motivational sphere of a specialist, his abilities, temperamental and characterological traits, etc. The main components of the profile of a detective’s profession have been considered. The author has described such structural components of the profile of the profession as general characteristics of the activity, working conditions, negative factors, occupational risk factors, psychological characteristics and professionally important personal qualities of a specialist. The author has provided the demands of the profession to the sensory and perceptual sphere of a detective, general and special abilities, the features of temperament and character, motivation, emotional and volitional qualities. It has been emphasized that comprehensive study of professional police activity based on the development of profiles of the profession is a prerequisite for solving problems related to the efficiency of using personnel potential, optimizing the selection of the most appropriate candidates for the police force, training and retraining of personnel, rationalization of work and reduction of injuries, etc.On the basis of a broad experimental study, the author has established the list of the main professional qualities of a detective of the National Police; has determined the qualitative and quantitative psychological and psychophysiological indicators recommended for the professional activity. The author has also established psychological and psychophysiological contraindications for overtaking the professional activity of a detective (a criminal police officer).

Sign in / Sign up

Export Citation Format

Share Document