A Numerical Model for Brownian Motions of Nano-Particles in Supersonic and Hypersonic Impactors

Author(s):  
Azam Zare ◽  
Omid Abouali ◽  
Goodarz Ahmadi

In this paper, transport and deposition processes of nano-particles in supersonic and hypersonic impactors were investigated using a computational modeling approach. Axisymmetric forms of the compressible Navier-Stokes and energy equations were solved and the airflow and thermal condition in the impactor including the upstream nozzle were evaluated. A computer simulation model for solving the Lagrangian particle equation of motion including all the relevant forces was developed. The importance of the accurate modeling of the Brownian motion of nano-particles was further emphasized. The motion of nano- and micro-particles in the supersonic and hypersonic impactors were then simulated and the impactor capture efficiencies under various operating conditions were studied. For dilute particle concentrations, the assumption of one-way interaction was used. Particular attention was given to proper evaluation of the Brownian motion of the nano-particles in the upstream nozzle and in the body of impactor. The simulation results for collection efficiency were found to be in good agreement with experimental data. In particular, the model accurately predicted the loss of the nano-particles in the upstream nozzle due to their Brownian motion.

2005 ◽  
Author(s):  
Omid Abouali ◽  
Goodarz Ahmadi

In this study the performance of supersonic and hypersonic impactors under various operating conditions was analyzed using a computer simulation model. The study was focused on the effect of the nozzle upstream condition on the performance of the supersonic and hypersonic impactors. In our earlier work, the computational domain covered downstream of the nozzle with a sonic boundary condition at the inlet. In the present study, the computational domain included the upstream nozzle where the flow and particles enter with at low velocities. Axisymmetric forms of the compressible Navier-Stokes and energy equations were solved and the gas flow and thermal condition in the impactor were for evaluated. A Lagrangian particle trajectory analysis procedure was used and the deposition rates of different size particles under various operating conditions were studied. For dilute particle concentrations, one-way interaction was assumed and the effect of particles on gas flow field was ignored. The importance of drag and Brownian forces on particle motions in supersonic/hypersonic impactors was analyzed. Sensitivity of the simulation results to the use of different expressions for the drag force was also examined. It was shown that when the upstream nozzle is included in the computational model, the Stokes-Cunningham drag with variable correction coefficient and a constant Cunningham correction factor based on stagnation point properties lead to the same results. Thus these drag laws are most suitable for computer simulation studies of nano-particles in supersonic/hypersonic impactors. The computer simulation results were shown to compare favorably with the experimental data.


Author(s):  
Omid Abouali ◽  
Goodarz Ahmadi

Supersonic/hypersonic impactors are used as a collector and/or size separator of nano- and micro-particles. Thin film and fine line pattern deposition by aerosol jets are other applications of deposition of supersonic/hypersonic impactors. At extremely low backpressures, the exiting flow from a nozzle forms a supersonic free jet. The supersonic jet forms a strong normal shock in the front of the impactor plate. The stagnation pressure, backpressure and distance between the nozzle exit and the impactor plate affect the flow field. Due to the rather complicated flow in the impactor, studies of particle motions in supersonic impactors are rather scarce. In this study the airflow and particle transport and deposition in a supersonic/hypersonic impactor are numerically simulated. The axisymmetric compressible Navier-Stokes equation is solved and the flow properties are evaluated. It is assumed that the particle concentration is dilute, to the extent that the presence of particles does not alter the flow field. Deposition of different size particles under different operating conditions is studied. The importance of drag, lift and Brownian forces on particle motions in supersonic impactors is discussed. Sensitivity of the simulation results to the use of different expressions for the drag force is also examined. A strong bow shock on the flowfield has much effect in drag forces on particles. It is shown that the Stokes-Cunningham drag with variable correction coefficient is most suitable for computer simulation studies of nano-particles in supersonic/hypersonic impactors. The computer simulation results are shown to compare favorably with the experimental data.


2020 ◽  
Vol 22 (4) ◽  
pp. 1439-1452
Author(s):  
Mohamed L. Benlekkam ◽  
Driss Nehari ◽  
Habib Y. Madani

AbstractThe temperature rise of photovoltaic’s cells deteriorates its conversion efficiency. The use of a phase change material (PCM) layer linked to a curved photovoltaic PV panel so-called PV-mirror to control its temperature elevation has been numerically studied. This numerical study was carried out to explore the effect of inner fins length on the thermal and electrical improvement of curved PV panel. So a numerical model of heat transfer with solid-liquid phase change has been developed to solve the Navier–Stokes and energy equations. The predicted results are validated with an available experimental and numerical data. Results shows that the use of fins improve the thermal load distribution presented on the upper front of PV/PCM system and maintained it under 42°C compared with another without fins and enhance the PV cells efficiency by more than 2%.


Author(s):  
Bhavani J ◽  
Sunil Kumar Prajapati ◽  
Ravichandran S

Cancer is assemblage diseases involving abnormal cell growth amid the potential of spread to other parts of the body due to tobacco use are the cause of about of cancer deaths. Another 10% is due to obesity, poor diet & drinking alcohol. In 2012 about 14.1 million new cases of cancer occurred globally. In females, the most common type is breast cancer. Cisplatin also known as cytophosphane is a nitrogen mustard alkylating agent from the oxazophosphinans groups were used to treat cancers & autoimmune disorders. Based on the above reasons I will fix the aim Preparation characterization of Cisplatin- nano particles  &  its anticancer activity. Solid tumor volume examination report showed that the assessment of different day indication 15,20,25 & 30th variations of different groups of tumor volumes were decreased CPG Nanoparticles (100 mg/kg)+ DAL(15th day 4.97±0.24↓), (20th day 0.6±0.13↓), (25th day 1.35±0.30↓) & (30th day 1.89±0.13↓).


Impact ◽  
2018 ◽  
Vol 2018 (3) ◽  
pp. 26-28
Author(s):  
Jonathan Dawson ◽  
Richard Oreffo

Gels made from clay could provide an environment able to stimulate stem-cells due to their ability to bind biological molecules. That molecules stick to clay has been known by scientists since the 1960s. Doctors observed that absorption into the blood stream of certain drugs was severely reduced when patients were also receiving clay-based antacid or anti-diarrhoeal treatments. This curious phenomenon was realized to be due to binding of the drugs by clay particles. This interaction is now routinely harnessed in the design of tablets to carefully control the release and action of a drug. Dr Dawson now proposes to use this property of clay to create micro-environments that could stimulate stem cells to regenerate damaged tissues such as bone, cartilage or skin. The rich electrostatic properties of nano (1 millionth of a millimetre) -scale clay particles which mediate these interactions could allow two hurdles facing the development of stem-cell based regenerative therapies to be overcome simultaneously. The first challenge - to deliver and hold stem cells at the right location in the body - is met by the ability of clays to self-organise into gels via the electrostatic interactions of the particles with each other. Cells mixed with a low concentration (less than 4%) of clay particles can be injected into the body and held in the right place by the gel, eliminating, in many situations, the need for surgery. Clay particles can also interact with large structural molecules (polymers) which are frequently used in the development of materials (or 'scaffolds'), designed to host stem cells. These interactions can greatly improve the strength of such structures and could be applied to preserve their stability at the site of injury until regeneration is complete. While several gels and scaffold materials have been designed to deliver and hold stem cells at the site of regeneration, the ability of clay nanoparticles to overcome a second critical hurdle facing stem-cell therapy is what makes them especially exciting. Essential to directing the activity of stem-cells is the carefully controlled provision of key biological signalling molecules. However, the open structures of conventional scaffolds or gels, while essential for the diffusion of nutrients to the cells, means their ability to hold the signalling molecules in the same location as the cells is limited. The ability of clay nano-particles to bind biological molecules presents a unique opportunity to create local environments at a site of injury or disease that can stimulate and control stem-cell driven repair. Dr Dawson's early studies investigated the ability of clay gels to stimulate the growth of new blood vessels by incorporating a key molecular signal that stimulates this process, vascular endothelial growth factor (VEGF). In a manner reminiscent of the observations made in the 60s, Dr Dawson and colleagues observed that adding a drop of clay gel to a solution containing VEGF caused, after a few hours, the disappearance of VEGF from the solution as it became bound to the gel. When placed in an experimental injury model, the gel-bound VEGF stimulated a cluster of new blood vessels to form. These exciting results indicate the potential of clay nanoparticles to create tailor-made micro-environments to foster stem cell regeneration. Dr Dawson is developing this approach as a means of first exploring the biological signals necessary to successfully control stem cell behaviour for regeneration and then, using the same approach, to provide stem cells with these signals to stimulate regeneration in the body. The project will seek to test this approach to regenerate bone lost to cancer or hip replacement failure. If successful the same technology may be applied to harness stem cells for the treatment of a whole host of different scenarios, from burn victims to those suffering with diabetes or Parkinson's.


2003 ◽  
Author(s):  
B. X. Wang ◽  
H. Li ◽  
X. F. Peng ◽  
L. X. Yang

The development of a numerical model for analyzing the effect of the nano-particles’ Brownian motion on the heat transfer is described. By using the Maxwell velocity distribution relations to calculate the most possible velocity of fluid molecules at certain temperature gradient location around the nano-particle, the interaction between fluid molecules and one single nano-particle is analyzed and calculated. Based on this, a syntonic system is proposed and the coupled effect that Brownian motion of nano-particles has on fluid molecules is simulated. This is used to formulate a reasonable analytic method, facilitating laboratory study. The results provide the essential features of the heat transfer process, contributed by micro-convection to be considered.


Author(s):  
Abhijit Mukherjee ◽  
Satish G. Kandlikar

Flow boiling through microchannels is characterized by nucleation of vapor bubbles on the channel walls and their rapid growth as they fill the entire channel cross-section. In parallel microchannels connected through a common header, formation of vapor bubbles often results in flow maldistribution that leads to reversed flow in certain channels. The reversed flow is detrimental to the heat transfer and leads to early CHF condition. One way of eliminating the reversed flow is to incorporate flow restrictions at the channel inlet. In the present numerical study, a nucleating vapor bubble placed near the restricted end of a microchannel is numerically simulated. The complete Navier-Stokes equations along with continuity and energy equations are solved using the SIMPLER method. The liquid-vapor interface is captured using the level set technique. The results show that with no restriction the bubble moves towards the nearest channel outlet, whereas in the presence of a restriction, the bubble moves towards the distant but unrestricted end. It is proposed that channels with increasing cross-sectional area may be used to promote unidirectional growth of the vapor plugs and prevent reversed flow.


Author(s):  
A. Agrawal ◽  
G. Biswas ◽  
S. W. J. Welch ◽  
F. Durst

The bubble formation and heat transfer on a horizontal surface have been numerically analyzed using a volume of fluid (VOF) based interface tracking method incorporated into a complete solution of the Navier-Stokes and the thermal energy equations. The numerical method took into account the effects of surface tension, the interface mass transfer and the corresponding latent heat. The computations demonstrated capability of the algorithm in generating quantitative information on unsteady periodic bubble release patterns and on the spatially and temporally varying film thickness. The computations also predict the transport coefficients on the horizontal surface.


2021 ◽  
Vol 153 (A2) ◽  
Author(s):  
Q Yang ◽  
W Qiu

Slamming forces on 2D and 3D bodies have been computed based on a CIP method. The highly nonlinear water entry problem governed by the Navier-Stokes equations was solved by a CIP based finite difference method on a fixed Cartesian grid. In the computation, a compact upwind scheme was employed for the advection calculations and a pressure-based algorithm was applied to treat the multiple phases. The free surface and the body boundaries were captured using density functions. For the pressure calculation, a Poisson-type equation was solved at each time step by the conjugate gradient iterative method. Validation studies were carried out for 2D wedges with various deadrise angles ranging from 0 to 60 degrees at constant vertical velocity. In the cases of wedges with small deadrise angles, the compressibility of air between the bottom of the wedge and the free surface was modelled. Studies were also extended to 3D bodies, such as a sphere, a cylinder and a catamaran, entering calm water. Computed pressures, free surface elevations and hydrodynamic forces were compared with experimental data and the numerical solutions by other methods.


2018 ◽  
Vol 8 (9) ◽  
pp. 1413 ◽  
Author(s):  
Dan Yao ◽  
Kwongi Lee ◽  
Minho Ha ◽  
Cheolung Cheong ◽  
Inhiug Lee

A new pump, called the hybrid airlift-jet pump, is developed by reinforcing the advantages and minimizing the demerits of airlift and jet pumps. First, a basic design of the hybrid airlift-jet pump is schematically presented. Subsequently, its performance characteristics are numerically investigated by varying the operating conditions of the airlift and jet parts in the hybrid pump. The compressible unsteady Reynolds-averaged Navier-Stokes equations, combined with the homogeneous mixture model for multiphase flow, are used as the governing equations for the two-phase flow in the hybrid pump. The pressure-based methods combined with the Pressure-Implicit with Splitting of Operators (PISO) algorithm are used as the computational fluid dynamics techniques. The validity of the present numerical methods is confirmed by comparing the predicted mass flow rate with the measured ones. In total, 18 simulation cases that are designed to represent the various operating conditions of the hybrid pump are investigated: eight of these cases belong to the operating conditions of only the jet part with different air and water inlet boundary conditions, and the remaining ten cases belong to the operating conditions of both the airlift and jet parts with different air and water inlet boundary conditions. The mass flow rate and the efficiency are compared for each case. For further investigation into the detailed flow characteristics, the pressure and velocity distributions of the mixture in a primary pipe are compared. Furthermore, a periodic fluctuation of the water flow in the mass flow rate is found and analyzed. Our results show that the performance of the jet or airlift pump can be enhanced by combining the operating principles of two pumps into the hybrid airlift-jet pump, newly proposed in the present study.


Sign in / Sign up

Export Citation Format

Share Document