Influence of Peripheral Opening on the Central Core Flow Behaviour in a Rotor-Stator System

2009 ◽  
Author(s):  
Fadi Abdel Nour ◽  
Roger Debuchy ◽  
Ge´rard Bois ◽  
Hassan Naji
Keyword(s):  
Static Pressure ◽  
Radial Flow ◽  
Numerical Study ◽  
Outer Region ◽  
Experimental Tests ◽  
Flow Property ◽  
Computation Method ◽  
Swirl Ratio ◽  
Rotating Disc ◽  
The Core

This work relates to an experimental, theoretical and numerical study of a turbulent flow with separated boundary layers between a rotating disc (rotor) and a stationary one (stator) without any superposed radial flow. The originality of this study is that the pre-swirl ratio at the periphery of the cavity (Kp) is lower than the core swirl ratio (KB) corresponding to the solid body rotation, as predicted by Batchelor in the case of infinite discs: this is what the authors call a rotor-stator system with low pre-swirl ratio. Under these conditions, recent works have shown that the core swirl ratio (K) is a decreasing function of the radius, at least in the peripheral region. This behaviour has rather been observed in the cavities with superposed centripetal radial flow. In the present paper, this flow property is explained starting from an asymptotic approach which leads to step-by-step analytical computation method of the radial distribution of the core swirl ratio (K) and of the static pressure on the stator side p*. The validation of the theory is based both on experimental and numerical results. The experimental tests are carried out in a rotor-stator cavity for different values of the pre-swirl ratio, which is done by geometrical changes of the periphery of the system. The experimental data mostly include the velocity measurements and the turbulent correlations by hot-wire anemometry in interstice between the discs, as well as the static pressure measurements on the stator side. Comparisons with predictions from the CFD code Fluent are also provided. The numerical simulations are performed using the two-equation k – ω SST turbulence model, assuming a 2D-axisymmetric steady flow, in a domain corresponding to the inter-disks spacing and the peripheral outer region of the cavity. Computed and experimental values are in good agreement with the theoretical results.

scholarly journals A Numerical Study of Cirrus Bands and Low Static-stability Layers associated with Tropical Cyclone Outflow

2021 ◽  
Author(s):  
Masayuki Kawashima
Keyword(s):  
Numerical Study ◽  
Potential Temperature ◽  
Outer Region ◽  
Static Stability ◽  
Core Region ◽  
Thin Layers ◽  
Vertical Shear ◽  
Thermal Gradients ◽  
Shallow Convection ◽  
The Core

AbstractProminent cirrus cloud banding occurred episodically within a northern cirrus canopy of Typhoon Talim (2017) during its recurvature. The generation mechanisms of the cirrus bands and low static-stability layers that support the bands are investigated using a numerical simulation with the Advanced Research Weather Research and Forecasting Model. Inspection of model output reveals that thin layers of near-neutral to weakly unstable static stability are persistently present in the upper and lower parts of the upper-level outflow, and shallow convection aligned along the vertical shear vector is prevalent in these layers. The cirrus banding occurs as the lowered outflow from the weakening storm ascends slantwise over a midlatitude baroclinic zone, and updrafts of the preexisting shallow convection in the upper part of the outflow layer become saturated. It is shown that the strong outflow resulting from violation of gradient-wind balance in the core region, by itself, creates the low static-stability layers. Analyses of potential temperature and static stability budgets show that the low static-stability layers are created mainly by the differential radial advection of radial thermal gradients on the vertical edges of the outflow. The radial thermal gradients occur in response to the outward air parcel acceleration in the core region and deceleration in the outer region, which, by inducing compensating vertical mass transport into and out of the outflow, act to tilt the isentropes within the shear layers. The effects of environmental flow and cloud radiative forcing on the cirrus banding are also addressed.

Experimental Measurements of Ingestion Through Turbine Rim Seals: Part 5 — Fluid Dynamics of Wheel-Space

2013 ◽  
Author(s):  
Carl M. Sangan ◽  
Yogesh Lalwani ◽  
J. Michael Owen ◽  
Gary D. Lock
Keyword(s):  
Flow Rate ◽  
Static Pressure ◽  
Outer Region ◽  
Turbine Stage ◽  
Rotating Disc ◽  
Flow Rates ◽  
Hot Gas ◽  
Fluid Core ◽  
Swirl Velocity ◽  
Good Agreement

This paper discusses the flow structure in typical rotor-stator systems with ingress and egress. Measurements of concentration, velocity and pressure were made using a rotating-disc rig which experimentally simulated hot gas ingestion into the wheel-space of an axial turbine stage. Externally-induced ingress through rim seals was generated from the non-axisymmetric pressures produced by the flow over the vanes and blades in the external annulus. Measurements were conducted using several single- and double-seal geometries and for a range of sealing flow rates and rotational speeds. The concentration measurements showed that the amount of ingress, which increased with decreasing sealing flow rate, depended on the seal geometry. The swirl velocity in the fluid core increased with decreasing sealing-flow rate but, outside the outer region in the wheel-space, it was largely unaffected by the seal geometry or by the amount of ingress. The radial distribution of static pressure, calculated from the measured swirl velocity in the core, was in good agreement with the pressures measured on the stator. The data for the double seals demonstrated that the ingested gas was predominately confined to the region between the seals near the periphery of the wheel-space; in the inner wheel-space, the effectiveness is shown to be significantly higher.

An Analytical Modeling of the Central Core Flow in a Rotor-Stator System With Several Preswirl Conditions

2010 ◽  
Vol 132 (6) ◽  
Author(s):  
Roger Debuchy ◽  
Fadi Abdel Nour ◽  
Gérard Bois
Keyword(s):  
Boundary Layers ◽  
Solid Body ◽  
Total Pressure ◽  
Static Pressure ◽  
Rotating Disk ◽  
Central Core ◽  
Swirl Ratio ◽  
The Core ◽  
Flow Features ◽  
Analytical Relations

In the most part of an enclosed rotor-stator system with separated boundary layers, the flow structure is characterized by a central core rotating as a solid body with a constant core-swirl ratio. This behavior is not always observed in an isolated rotor-stator cavity, i.e., without any centripetal or centrifugal throughflow, opened to the atmosphere at the periphery: Recent works have brought to evidence an increasing level of the core-swirl ratio from the periphery to the axis, as in the case of a rotor-stator with superposed centripetal flow. The present work is based on an asymptotical approach in order to provide a better understanding of this process. Assuming that the boundary layers behave as on a single rotating disk in a stationary fluid on the rotor side, and on a stationary disk in a rotating fluid on the stator side, new analytical relations are obtained for the core-swirl ratio, the static pressure on the stator, and also the total pressure at midheight of the cavity. An experimental study is performed: Detailed measurements provide data for several values of the significant dimensionless parameters: 1.14≤10−6×Re≤1.96, 0.05≤G≤0.10, and 0.07≤104×Ek≤2.65. The analysis of the results shows a good agreement between the theoretical solution and the experimental results. The analytical model can be used to provide a better understanding of the flow features. In addition, radial distributions of both core-swirl ratio, dimensionless static pressure on the stator, as well as dimensionless total pressure at midheight of the cavity, which are of interest to the designers, can be computed with an acceptable accuracy knowing the levels of the preswirl coefficient Kp and the solid body rotation swirl coefficient KB.

Static and dynamic response of sandwich beams with lattice and pantographic cores

2021 ◽  
pp. 109963622110338
Author(s):  
Yury Solyaev ◽  
Arseniy Babaytsev ◽  
Anastasia Ustenko ◽  
Andrey Ripetskiy ◽  
Alexander Volkov
Keyword(s):  
Mechanical Performance ◽  
Lattice Structure ◽  
Unit Length ◽  
Experimental Tests ◽  
Plane Geometry ◽  
Sandwich Beams ◽  
Static Tests ◽  
Three Point Bending ◽  
The Core ◽  
The Impact

Mechanical performance of 3d-printed polyamide sandwich beams with different type of the lattice cores is investigated. Four variants of the beams are considered, which differ in the type of connections between the elements in the lattice structure of the core. We consider the pantographic-type lattices formed by the two families of inclined beams placed with small offset and connected by stiff joints (variant 1), by hinges (variant 2) and made without joints (variant 3). The fourth type of the core has the standard plane geometry formed by the intersected beams lying in the same plane (variant 4). Experimental tests were performed for the localized indentation loading according to the three-point bending scheme with small span-to-thickness ratio. From the experiments we found that the plane geometry of variant 4 has the highest rigidity and the highest load bearing capacity in the static tests. However, other three variants of the pantographic-type cores (1–3) demonstrate the better performance under the impact loading. The impact strength of such structures are in 3.5–5 times higher than those one of variant 4 with almost the same mass per unit length. This result is validated by using numerical simulations and explained by the decrease of the stress concentration and the stress state triaxiality and also by the delocalization effects that arise in the pantographic-type cores.

Numerical investigations on the effect of volute casing treatment for performance augmentation in a centrifugal fan

2021 ◽  
pp. 095440622110341
Author(s):  
Manjunath L Nilugal ◽  
K Vasudeva Karanth ◽  
Madhwesh N
Keyword(s):  
Total Pressure ◽  
Static Pressure ◽  
Numerical Study ◽  
Pressure Coefficient ◽  
Three Dimensional ◽  
Pressure Rise ◽  
Centrifugal Fan ◽  
Casing Treatment ◽  
Sliding Mesh ◽  
Optimum Configuration

This article presents the effect of volute chamfering on the performance of a forward swept centrifugal fan. The numerical analysis is performed to obtain the performance parameters such as static pressure rise coefficient and total pressure coefficient for various flow coefficients. The chamfer ratio for the volute is optimized parametrically by providing a chamfer on either side of the volute. The influence of the chamfer ratio on the three dimensional flow domain was investigated numerically. The simulation is carried out using Re-Normalisation Group (RNG) k-[Formula: see text] turbulence model. The transient simulation of the fan system is done using standard sliding mesh method available in Fluent. It is found from the analysis that, configuration with chamfer ratio of 4.4 is found be the optimum configuration in terms of better performance characteristics. On an average, this optimum configuration provides improvement of about 6.3% in static pressure rise coefficient when compared to the base model. This optimized chamfer configuration also gives a higher total pressure coefficient of about 3% validating the augmentation in static pressure rise coefficient with respect to the base model. Hence, this numerical study establishes the effectiveness of optimally providing volute chamfer on the overall performance improvement of forward bladed centrifugal fan.

scholarly journals High-contrast and resolution near-infrared photometry of the core of R136

2021 ◽  
Vol 503 (1) ◽  
pp. 292-311
Author(s):  
Zeinab Khorrami ◽  
Maud Langlois ◽  
Paul C Clark ◽  
Farrokh Vakili ◽  
Anne S M Buckner ◽  
...  
Keyword(s):  
Adaptive Optics ◽  
Near Infrared ◽  
Outer Region ◽  
Mass Range ◽  
Mass Function ◽  
Large Magellanic Cloud ◽  
Star Forming ◽  
The Core ◽  
Very Large Telescope ◽  
30 Doradus

ABSTRACT We present the sharpest and deepest near-infrared photometric analysis of the core of R136, a newly formed massive star cluster at the centre of the 30 Doradus star-forming region in the Large Magellanic Cloud. We used the extreme adaptive optics of the SPHERE focal instrument implemented on the ESO Very Large Telescope and operated in its IRDIS imaging mode for the second time with longer exposure time in the H and K filters. Our aim was to (i) increase the number of resolved sources in the core of R136, and (ii) to compare with the first epoch to classify the properties of the detected common sources between the two epochs. Within the field of view (FOV) of 10.8″ × 12.1″ ($2.7\,\text {pc}\times 3.0\, \text {pc}$), we detected 1499 sources in both H and K filters, for which 76 per cent of these sources have visual companions closer than 0.2″. The larger number of detected sources enabled us to better sample the mass function (MF). The MF slopes are estimated at ages of 1, 1.5, and 2 Myr, at different radii, and for different mass ranges. The MF slopes for the mass range of 10–300 M⊙ are about 0.3 dex steeper than the mass range of 3–300 M⊙, for the whole FOV and different radii. Comparing the JHK colours of 790 sources common in between the two epochs, 67 per cent of detected sources in the outer region (r > 3″) are not consistent with evolutionary models at 1–2 Myr and with extinctions similar to the average cluster value, suggesting an origin from ongoing star formation within 30 Doradus, unrelated to R136.

scholarly journals A numerical study of the impact perforation of sandwich panels with graded hollow sphere cores

2021 ◽  
Vol 13 (4) ◽  
pp. 168781402110094
Author(s):  
Ibrahim Elnasri ◽  
Han Zhao
Keyword(s):  
Boundary Conditions ◽  
Hollow Sphere ◽  
Sandwich Panel ◽  
Numerical Study ◽  
Sandwich Panels ◽  
Hopkinson Bar ◽  
Core Density ◽  
The Core ◽  
The Impact ◽  
Force Displacement

In this study, we numerically investigate the impact perforation of sandwich panels made of 0.8 mm 2024-T3 aluminum alloy skin sheets and graded polymeric hollow sphere cores with four different gradient profiles. A suitable numerical model was conducted using the LS-DYNA code, calibrated with an inverse perforation test, instrumented with a Hopkinson bar, and validated using experimental data from the literature. Moreover, the effects of quasi-static loading, landing rates, and boundary conditions on the perforation resistance of the studied graded core sandwich panels were discussed. The simulation results showed that the piercing force–displacement response of the graded core sandwich panels is affected by the core density gradient profiles. Besides, the energy absorption capability can be effectively enhanced by modifying the arrangement of the core layers with unclumping boundary conditions in the graded core sandwich panel, which is rather too hard to achieve with clumping boundary conditions.

scholarly journals Experimental Tests for Measuring Individual Attentional Characteristics in Songbirds

Animals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 2233
Author(s):  
Loïc Pougnault ◽  
Hugo Cousillas ◽  
Christine Heyraud ◽  
Ludwig Huber ◽  
Martine Hausberger ◽  
...  
Keyword(s):  
Cognitive Processes ◽  
Comparative Research ◽  
Visual Stimuli ◽  
Experimental Tests ◽  
European Starling ◽  
Auditory Stimuli ◽  
The Core ◽  
Cognitive Studies ◽  
Individual Variations ◽  
Species Specific

Attention is defined as the ability to process selectively one aspect of the environment over others and is at the core of all cognitive processes such as learning, memorization, and categorization. Thus, evaluating and comparing attentional characteristics between individuals and according to situations is an important aspect of cognitive studies. Recent studies showed the interest of analyzing spontaneous attention in standardized situations, but data are still scarce, especially for songbirds. The present study adapted three tests of attention (towards visual non-social, visual social, and auditory stimuli) as tools for future comparative research in the European starling (Sturnus vulgaris), a species that is well known to present individual variations in social learning or engagement. Our results reveal that attentional characteristics (glances versus gazes) vary according to the stimulus broadcasted: more gazes towards unusual visual stimuli and species-specific auditory stimuli and more glances towards species-specific visual stimuli and hetero-specific auditory stimuli. This study revealing individual variations shows that these tests constitute a very useful and easy-to-use tool for evaluating spontaneous individual attentional characteristics and their modulation by a variety of factors. Our results also indicate that attentional skills are not a uniform concept and depend upon the modality and the stimulus type.

Numerical Investigation of Ductile Fracture in Pipelines Under Complex Loading Using a Phenomenological Damage Model

2021 ◽  
Author(s):  
Iago S. Santos ◽  
Diego F. B. Sarzosa
Keyword(s):  
Ductile Fracture ◽  
Mechanical Response ◽  
Numerical Study ◽  
Damage Model ◽  
Stress Triaxiality ◽  
Numerical Procedure ◽  
Complex Loading ◽  
Experimental Tests ◽  
Compact Tension ◽  
Axial Tensile

Abstract This paper presents a numerical study on pipes ductile fracture mechanical response using a phenomenological computational damage model. The damage is controlled by an initiation criterion dependent on the stress triaxiality and the Lode angle parameter, and a post-initiation damage law to eliminate each finite element from the mesh. Experimental tests were carried out to calibrate the elastoplastic response, damage parameters and validate the FEM models. The tested geometries were round bars having smooth and notched cross-section, flat notched specimens under axial tensile loads, and fracture toughness tests in deeply cracked bending specimens SE(B) and compact tension samples C(T). The calibrated numerical procedure was applied to execute a parametric study in pipes with circumferential surface cracks subjected to tensile and internal pressure loads simultaneously. The effects of the variation of geometric parameters and the load applications on the pipes strain capacity were investigated. The influence of longitudinal misalignment between adjacent pipes was also investigated.

scholarly journals Experimental and CFD Studies of the Hydrodynamics in Wet Agglomeration Process

2018 ◽  
Vol 2 (3) ◽  
pp. 32 ◽  
Author(s):  
Benjamin Oyegbile ◽  
Guven Akdogan ◽  
Mohsen Karimi
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Flow Analysis ◽  
Outer Region ◽  
Tangential Velocity ◽  
Numerical Code ◽  
Cfd Model ◽  
Rotating Disc ◽  
Batch Mode ◽  
Agglomeration Process

In this study, an experimentally validated computational model was developed to investigate the hydrodynamics in a rotor-stator vortex agglomeration reactor RVR having a rotating disc at the centre with two shrouded outer plates. A numerical simulation was performed using a simplified form of the reactor geometry to compute the 3-D flow field in batch mode operations. Thereafter, the model was validated using data from a 2-D Particle Image Velocimetry (PIV) flow analysis performed during the design of the reactor. Using different operating speeds, namely 70, 90, 110, and 130 rpm, the flow fields were computed numerically, followed by a comprehensive data analysis. The simulation results showed separated boundary layers on the rotating disc and the stator. The flow field within the reactor was characterized by a rotational plane circular forced vortex flow, in which the streamlines are concentric circles with a rotational vortex. Overall, the results of the numerical simulation demonstrated a fairly good agreement between the Computational Fluid Dynamics (CFD) model and the experimental data, as well as the available theoretical predictions. The swirl ratio β was found to be approximately 0.4044, 0.4038, 0.4044, and 0.4043 for the operating speeds of N = 70, 90, 110, and 130 rpm, respectively. In terms of the spatial distribution, the turbulence intensity and kinetic energy were concentrated on the outer region of the reactor, while the circumferential velocity showed a decreasing intensity towards the shroud. However, a comparison of the CFD and experimental predictions of the tangential velocity and the vorticity amplitude profiles showed that these parameters were under-predicted by the experimental analysis, which could be attributed to some of the experimental limitations rather than the robustness of the CFD model or numerical code.

Sign in / Sign up

Export Citation Format

Share Document