scholarly journals Improved carbon dioxide storage over clay-supported perhydroxylated glucodendrimer

2017 ◽  
Vol 95 (9) ◽  
pp. 999-1007 ◽  
Author(s):  
Saadia Nousir ◽  
Gerlainde Yemelong ◽  
Sameh Bouguedoura ◽  
Yoann M. Chabre ◽  
Tze Chieh Shiao ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Low Cost ◽  
Nitrogen Adsorption ◽  
Interlayer Spacing ◽  
Physical Interaction ◽  
Thermal Regeneration ◽  
Retention Capacity ◽  
Oh Groups ◽  
Carrier Gas ◽  
Surface Basicity

Low-cost biosourced hybrid microporous adsorbents with improved affinity towards carbon dioxyde (CO2) were prepared through the incorporation of various amounts of glucosylated dendrimer into bentonite- and montmorillonite-rich composite materials. Characterization by nitrogen adsorption–desorption isotherms, surface specific and pore size analyses (BET and BJH), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) revealed changes in the interlayer spacing and textural structure of the materials. Thermal programmed desorption measurements (TPD) showed significant improvements of the retention capacity of CO2 (CRC) and water (WRC). This was explained in terms of enhancement of both surface basicity and hydrophilic character due to the incorporation of terminal polyhydroxyl groups. The CRC was found to vary according to the previous saturation time with CO2 and the carrier gas throughput. CO2 was totally released upon temperature not exceeding 80 °C or even at room temperature upon strong carrier gas stream, thus providing evidence that CO2 capture involves almost exclusively physical interaction with the OH groups of the dendrimer. This result opens promising prospects for the reversible capture of carbon dioxide with easy release without thermal regeneration, more particularly when extending this concept to biosourced dendrimers.

Application of Disk Aerators to Recarbonation of Alkaline Wastewater from Wet Gasification of Carbide

1991 ◽  
Vol 24 (7) ◽  
pp. 277-284 ◽  
Author(s):  
E. Gomólka ◽  
B. Gomólka
Keyword(s):  
Carbon Dioxide ◽  
Liquid Phase ◽  
Gas Phase ◽  
Flue Gas ◽  
Carbonic Acid ◽  
Low Cost ◽  
Flue Gases ◽  
Carbon Dioxide Content ◽  
Patent Claim ◽  
Phase Dispersion

Whenever possible, neutralization of alkaline wastewater should involve low-cost acid. It is conventional to make use of carbonic acid produced via the reaction of carbon dioxide (contained in flue gases) with water according to the following equation: Carbon dioxide content in the flue gas stream varies from 10% to 15%. The flue gas stream may either be passed to the wastewater contained in the recarbonizers, or. enter the scrubbers (which are continually sprayed with wastewater) from the bottom in oountercurrent. The reactors, in which recarbonation occurs, have the ability to expand the contact surface between gaseous and liquid phase. This can be achieved by gas phase dispersion in the liquid phase (bubbling), by liquid phase dispersion in the gas phase (spraying), or by bubbling and spraying, and mixing. These concurrent operations are carried out during motion of the disk aerator (which is a patent claim). The authors describe the functioning of the disk aerator, the composition of the wastewater produced during wet gasification of carbide, the chemistry of recarbonation and decarbonation, and the concept of applying the disk aerator so as to make the wastewater fit for reuse (after suitable neutralization) as feeding water in acetylene generators.

Characterization of a Polymeric Membrane for the Separation of Hydrogen in a Mixture with CO2

2016 ◽  
Vol 9 (1) ◽  
pp. 126-136 ◽  
Author(s):  
Dionisio H. Malagón-Romero ◽  
Alexander Ladino ◽  
Nataly Ortiz ◽  
Liliana P. Green
Keyword(s):  
Carbon Dioxide ◽  
Hydrogen Production ◽  
Test Performance ◽  
Low Cost ◽  
Time Lag ◽  
Polymeric Membrane ◽  
Biological Processes ◽  
Scanning Calorimetry ◽  
Environmentally Sustainable ◽  
Production Of Hydrogen

Hydrogen is expected to play an important role as a clean, reliable and renewable energy source. A key challenge is the production of hydrogen in an economically and environmentally sustainable way on an industrial scale. One promising method of hydrogen production is via biological processes using agricultural resources, where the hydrogen is found to be mixed with other gases, such as carbon dioxide. Thus, to separate hydrogen from the mixture, it is challenging to implement and evaluate a simple, low cost, reliable and efficient separation process. So, the aim of this work was to develop a polymeric membrane for hydrogen separation. The developed membranes were made of polysulfone via phase inversion by a controlled evaporation method with 5 wt % and 10 wt % of polysulfone resulting in thicknesses of 132 and 239 micrometers, respectively. Membrane characterization was performed using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), atomic force microscopy (AFM), and ASTM D882 tensile test. Performance was characterized using a 23 factorial experiment using the time lag method, comparing the results with those from gas chromatography (GC). As a result, developed membranes exhibited dense microstructures, low values of RMS roughness, and glass transition temperatures of approximately 191.75 °C and 190.43 °C for the 5 wt % and 10 wt % membranes, respectively. Performance results for the given membranes showed a hydrogen selectivity of 8.20 for an evaluated gas mixture 54% hydrogen and 46% carbon dioxide. According to selectivity achieved, H2 separation from carbon dioxide is feasible with possibilities of scalability. These results are important for consolidating hydrogen production from biological processes.

scholarly journals Graphene oxide-based rechargeable respiratory masks

2020 ◽  
Vol 1 (1) ◽  
Author(s):  
Stelbin Peter Figerez ◽  
Sudeshna Patra ◽  
G Rajalakshmi ◽  
Tharangattu N Narayanan
Keyword(s):  
Graphene Oxide ◽  
Polyvinylidene Fluoride ◽  
Occupational Safety ◽  
Low Cost ◽  
Triboelectric Nanogenerator ◽  
Layer System ◽  
Retention Capacity ◽  
Simple Modification ◽  
Nonwoven Fabrics ◽  
Mask Design

Abstract Respiratory masks having similar standards of ‘N95’, defined by the US National Institute for Occupational Safety and Health, will be highly sought after, post the current COVID-19 pandemic. Here, such a low-cost (∼$1/mask) mask design having electrostatic rechargeability and filtration efficiency of >95% with a quality factor of ∼20 kPa−1 is demonstrated. This filtration efficacy is for particles of size 300 nm. The tri-layer mask, named PPDFGO tri, contains nylon, modified polypropylene (PPY), and cotton nonwoven fabrics as three layers. The melt-spun PPY, available in a conventional N95 mask, modified with graphene oxide and polyvinylidene fluoride mixture containing paste using a simple solution casting method acts as active filtration layer. The efficacy of this tri-layer system toward triboelectric rechargeability using small mechanical agitations is demonstrated here. These triboelectric nanogenerator (TENG)-assisted membranes have high electrostatic charge retention capacity (∼1 nC/cm2 after 5 days in ambient condition) and high rechargeability even in very humid conditions (>80% RH). A simple but robust permeability measurement set up is also constructed to test these TENG-based membranes, where a flow rate of 30–35 L/min is maintained during the testing. Such a simple modification to the existing mask designs enabling their rechargeability via external mechanical disturbances, with enhanced usability for single use as well as for reuse with decontantamination, will be highly beneficial in the realm of indispensable personal protective equipment.

Chromatographic separation of hydrocarbon gases on zeolites with the use of carbon dioxide as carrier gas

1984 ◽  
Vol 289 ◽  
pp. 95-103 ◽  
Author(s):  
T.G. Andronikashvili ◽  
V.G. Berezkin ◽  
L.Ya. Laperashvili ◽  
N.A. Nadiradze
Keyword(s):  
Carbon Dioxide ◽  
Chromatographic Separation ◽  
Hydrocarbon Gases ◽  
Carrier Gas

Carbon Dioxide as a Carbon Resource – Recent Trends and Perspectives

2012 ◽  
Vol 67 (10) ◽  
pp. 961-975 ◽  
Author(s):  
Markus Hölscher ◽  
Christoph Gürtler ◽  
Wilhelm Keim ◽  
Thomas E. Müller ◽  
Martina Peters ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Raw Materials ◽  
Low Cost ◽  
Polymeric Materials ◽  
Short Review ◽  
Chemical Research ◽  
Bond Forming ◽  
Bulk Chemicals ◽  
High Thermodynamic Stability ◽  
Recent Trends

With the growing perception of industrialized societies that fossil raw materials are limited resources, academic chemical research and chemical industry have started to introduce novel catalytic technologies which aim at the development of economically competitive processes relying much more strongly on the use of alternative carbon feedstocks. Great interest is given world-wide to carbon dioxide (CO2) as it is part of the global carbon cycle, nontoxic, easily available in sufficient quantities anywhere in the industrialized world, and can be managed technically with ease, and at low cost. In principle carbon dioxide can be used to generate a large variety of synthetic products ranging from bulk chemicals like methanol and formic acid, through polymeric materials, to fine chemicals like aromatic acids useful in the pharmaceutical industry. Owing to the high thermodynamic stability of CO2, the energy constraints of chemical reactions have to be carefully analyzed to select promising processes. Furthermore, the high kinetic barriers for incorporation of CO2 into C-H or C-C bond forming reactions require that any novel transformation of CO2 must inevitably be associated with a novel catalytic technology. This short review comprises a selection of the most recent academic and industrial research developments mainly with regard to innovations in CO2 chemistry in the field of homogeneous catalysis and processes.

scholarly journals Effect of Intercalation Structure of Organo-Modified Montmorillonite/Polylactic Acid on Wheat Straw Fiber/Polylactic Acid Composites

Polymers ◽  
2018 ◽  
Vol 10 (8) ◽  
pp. 896 ◽  
Author(s):  
Qiqi Fan ◽  
Guangping Han ◽  
Wanli Cheng ◽  
Huafeng Tian ◽  
Dong Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermogravimetric Analysis ◽  
Wheat Straw ◽  
Polylactic Acid ◽  
Low Cost ◽  
Interlayer Spacing ◽  
Positive Influence ◽  
X Ray Diffraction ◽  
Ft Ir ◽  
Ir Analysis

In this work, an easy way to prepare the polylactic acid (PLA)/wheat straw fiber (WSF) composite was proposed. The method involved uses either the dopamine-treated WSF or the two-step montmorillonite (MMT)-modified WSF as the filler material. In order to achieve the dispersibility and exfoliation of MMT, it was modified by 12-aminododecanoic acid using a two-step route. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were performed to characterize the modified MMT and the coated WSF. As for the properties of PLA/WSF composites, some thermal (using Fourier transform infrared spectroscopy (FT-IR) and thermogravimetric analysis) and mechanical properties (flexural, tensile, and impact) were analyzed. The results showed that the dopamine was successfully coated onto the WSF. Furthermore, Na-MMT was successfully transformed to organo-montmorillonite (OMMT) and formed an exfoliated structure. In addition, a better dispersion of MMT was obtained using the two-step treatment. The interlayer spacing of modified MMT was 4.06 nm, which was 123% higher than that of the unmodified MMT. Additionally, FT-IR analysis suggested that OMMT diffused into the PLA matrix. The thermogravimetric analysis (TGA) showed that a higher thermal stability of PLA/WSF composites was obtained for the modified MMT and dopamine. The results also showed that both the dopamine treated WSF and the two-step-treated MMT exhibited a positive influence on the mechanical properties of PLA/WSF composites, especially on the tensile strength, which increased by 367% compared to the unmodified precursors. This route offers researchers a potential scheme to improve the thermal and mechanical properties of PLA/WSF composites in a low-cost way.

Synthesis of Novel Core-Shell Structured Hydroxyapatite/Meso-Silica for Removal of Methylene Blue from Aqueous Solutions

2012 ◽  
Vol 463-464 ◽  
pp. 543-547 ◽  
Author(s):  
Cheng Feng Li ◽  
Xiao Lu Ge ◽  
Shu Guang Liu ◽  
Fei Yu Liu
Keyword(s):  
Methylene Blue ◽  
Aqueous Solutions ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Low Cost ◽  
Nitrogen Adsorption ◽  
Precipitation Method ◽  
Core Shell ◽  
Adsorption Desorption

Core-shell structured hydroxyapatite (HA)/meso-silica was prepared and used as absorbance of methylene blue (MB). HA/meso-silica was synthesized in three steps: preparation of nano-sized HA by wet precipitation method, coating of dense silica and deposition of meso-silica shell on HA. As-received samples were characterized by Fourier transformed infare spectra, small angle X-ray diffraction, nitrogen adsorption-desorption isotherm and transmission electron microscopy. A wormhole framework mesostructure was found for HA/meso-silica. The specific surface area and pore volume were 128 m2•g-1 and 0.36 cm3•g-1, respectively. From the adsorption isotherm, HA/meso-silica with the great specific surface area exhibited a prominent adsorption capacity of MB (134.0 mg/g) in comparison with bare HA (0 mg/g). This study might shed light on surface modification of conventional low-cost adsorbents for removal of organic pollutants from aqueous solutions.

scholarly journals Modelling key market impacts and land allocation for biofuel production and forestry

2006 ◽  
Vol 2006 ◽  
pp. 1-12
Author(s):  
A. Korobeinikov ◽  
P. Read ◽  
A. Parshotam ◽  
J. Lermit
Keyword(s):  
Carbon Dioxide ◽  
Atmospheric Carbon Dioxide ◽  
Large Scale ◽  
Low Cost ◽  
Wood Products ◽  
Biofuel Production ◽  
Fuel Wood ◽  
Carbon Dioxide Levels ◽  
The Cost ◽  
The Impact

It has been suggested that the large scale use of biofuel, that is, fuel derived from biological materials, especially in combination with reforestation of large areas, can lead to a low-cost reduction of atmospheric carbon dioxide levels. In this paper, a model of three markets: fuel, wood products, and land are considered with the aim of evaluating the impact of large scale biofuel production and forestry on these markets, and to estimate the cost of a policy aimed at the reduction of carbon dioxide in the atmosphere. It is shown that the costs are lower than had been previously expected.

Selective adsorption behaviour of carbon dioxide in OH-functionalized metal–organic framework materials

CrystEngComm ◽  
2017 ◽  
Vol 19 (36) ◽  
pp. 5346-5350 ◽  
Author(s):  
Jinjie Qian ◽  
Jinni Shen ◽  
Qipeng Li ◽  
Yue Hu ◽  
Shaoming Huang
Keyword(s):  
Carbon Dioxide ◽  
Hydrogen Bond ◽  
Selective Adsorption ◽  
Metal Organic Framework ◽  
Metal Organic Frameworks ◽  
Adsorption Behaviour ◽  
Weak Hydrogen Bond ◽  
Oh Groups ◽  
Framework Materials ◽  
Metal Organic

The theoretically optimal adsorption locations in hydroxyl (OH)-decorated metal–organic frameworks show that the captured CO2 molecules interact with the cis-μ2-OH groups in an end-on mode, which shows a moderate to weak hydrogen bond.

Sign in / Sign up

Export Citation Format

Share Document