scholarly journals Encapsulation of Nicardipine Hydrochloride and Release from Biodegradable Poly(D,L-lactic-co-glycolic acid) Microparticles by Double Emulsion Process: Effect of Emulsion Stability and Different Parameters on Drug Entrapment

2017 ◽  
Vol 2017 ◽  
pp. 1-13 ◽  
Author(s):  
Nopparuj Soomherun ◽  
Narumol Kreua-ongarjnukool ◽  
Sorayouth Chumnanvej ◽  
Saowapa Thumsing
Keyword(s):  
Drug Delivery ◽  
Controlled Release ◽  
Glycolic Acid ◽  
Release Kinetics ◽  
Double Emulsion ◽  
Average Diameter ◽  
Optimal Processing ◽  
Alternative Drug ◽  
Biodegradable Poly

Poly(D,L-lactic-co-glycolic acid) (PLGA) is an important material used in drug delivery when controlled release is required. The purpose of this research is to design and characterize PLGA microparticles (PLGA MPs) implants for the controlled release of nicardipine hydrochloride (NCH) in vitro. This study used the water-in-oil-in-water (w1/o/w2) double emulsion and solvent diffusion/evaporation approach to prepare PLGA MPs. Optimal processing conditions were found, such as polymer content, surfactant type, stabilizer concentration, inner and outer aqueous phase volumes, and stirring speed. The PLGA MPs for use as nicardipine hydrochloride (NCH) loading and release had spherical morphology, and the average diameter was smaller than 5.20±0.25 μm. The release kinetics were modeled to elucidate the possible mechanism of drug release. In vitro release studies indicated that the NCH release rate is slow and continuous. PLGA MPs are an interesting alternative drug delivery system, especially for use with NCH for biomedical applications.

scholarly journals Tumor Targeted Multifunctional Magnetic Nanobubbles for MR/US Dual Imaging and Focused Ultrasound Triggered Drug Delivery

2020 ◽  
Vol 8 ◽  
Author(s):  
Zhen Jin ◽  
Jinlong Chang ◽  
Peipei Dou ◽  
Shang Jin ◽  
Min Jiao ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Mr Imaging ◽  
Tumor Targeting ◽  
Focused Ultrasound ◽  
Imaging Modality ◽  
Double Emulsion ◽  
Superparamagnetic Iron Oxide ◽  
Average Diameter ◽  
Control Technique

The development of multifunctional nanoplatforms that are safe and have multiple therapeutic functions integrated with dual- or multi-imaging modality is one of the most urgent medical requirements for active cancer therapy. In our study, we prepared multifunctional magnetic nanobubbles (MF-MNBs) by co-encapsulating superparamagnetic iron oxide nanoparticles (SPIONs) and doxorubicin into polylactideco–glycolide–polyethylene glycol–folate (PLGA-PEG-FA) polymer-based nanobubbles for tumor-targeted ultrasound (US)/magnetic resonance (MR) imaging and focused ultrasound (FUS)-triggered drug delivery. Hydrophobic SPIONs were successfully embedded into MF-MNBs by a typical double emulsion process. The MF-MNBs were highly dispersed with well-defined spherical morphology and an average diameter of 208.4 ± 12.58 nm. The potential of MF-MNB as a dual-modal contrast agent for US and MR imaging was investigated via in vitro study, and the MF-MNB exhibits promising US/MR contrast ability. Moreover, tumor targeting ability was further enhanced by folate conjugation and assessed through in vitro cell test. Furthermore, FUS, as a non-invasive and remote-control technique, was adopted to trigger the release of doxorubicin from MF-MNB and generate the sonoporation effect to enhance drug release and cellular uptake of MF-MNBs. The 4T1 cell viability was significantly decreased by FA ligand-receptor-mediated targeting and FUS sonication. In addition, the developed MF-MNB also exhibits enhanced accumulation in tumor site by FA ligand-receptor-mediated tumor targeting, in which the accumulation of MF-MNB was further enhanced by FUS sonication. Hence, we believe that the MF-MNB could be a promising drug nanocarrier for US/MR-guided anticancer drug delivery to improve cancer treatment efficacy.

scholarly journals Formulation Development, Characterization and In-vitro Evaluation of Tamoxifen Loaded Liposomes

2020 ◽  
pp. 64-82
Author(s):  
Md. Mazed Hasan ◽  
Md. Hamiduzzaman ◽  
Ishrat Jahan ◽  
A. H. M. Nazmul Hasan ◽  
Md. Asaduzzaman
Keyword(s):  
Drug Delivery ◽  
Controlled Release ◽  
Side Effects ◽  
Cancer Treatment ◽  
Drug Delivery System ◽  
Delivery System ◽  
Ex Vivo ◽  
Release Kinetics ◽  
Formulation Development

Background: The study was aimed to prepare and evaluate tamoxifen loaded controlled release liposomes to reduce the side effects of tamoxifen during cancer treatment.  Methods: Different tamoxifen loaded liposomes were prepared by modified ether injection (MEIM) and thin film hydration method (TFHM) under prescribed conditions. The prepared liposomes were characterized by using optical microscopy, evaluating encapsulation efficiency, in-vitro and ex-vivo diffusion studies by using dialysis membrane and chicken intestinal sac respectively. Results: The data revealed that all of the liposomes were spherical in shape and stable under three physical conditions i.e. 4, 25 and 37 ± 2°C temperatures and 60 ±5% relative humidity. Additionally most of the liposomes followed zero order and class II release kinetics. It was also observed that with the increase of phospholipids and cholesterol, entrapment efficiency of liposome vesicles increased thus giving a controlled release drug delivery system but further increase reduced this efficiency at a certain level. Conclusion: The formulated control release liposomes might be a good drug delivery system for target oriented drug delivery with minimum side effects of tamoxifen during cancer treatment.

Design, Synthesis and Studies on Novel Polymeric Prodrugs of Erlotinib for Colon Drug Delivery

2020 ◽  
Vol 20 ◽  
Author(s):  
Sahil Kumar ◽  
Bandna Sharma ◽  
Tilak R. Bhardwaj ◽  
Rajesh K. Singh
Keyword(s):  
Drug Delivery ◽  
Colon Cancer ◽  
Drug Release ◽  
Anticancer Agents ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Specific Treatment ◽  
Drug Conjugates ◽  
Polymer Drug Conjugates

Aims: In the present study, polymer-drug conjugates were synthesized based on azo-bond cleavage drug delivery approach for targeting erlotinib as anticancer drug specifically to the colon for the proficient treatment of colon cancer. Background: Colon cancer (CC) is the third commonly detected tumor worldwide and it make up about 10 % of all cases of cancers. Most of the chemotherapeutic drugs available for treating colon cancer are not only toxic to cancerous cells but also to the normal healthy cells. Among the various approaches to get rid of the adverse effects of anticancer agents, prodrugs are one of the most imperative approaches. Objective: The objective of the study is to chemically modify the erlotinib drug through azo-bond linkage and suitable spacer which will be finally linked to polymeric backbone to give desired polymer linked prodrug. The azo reductase enzyme present in colon is supposed to cleave the azo-bond specifically and augment the drug release at the colon. Methods: The synthesized conjugates were characterized by IR and 1H-NMR spectroscopy. The cleavage of aromatic azobond resulted in a potential colon-specific liberation of drug from conjugate studied in rat fecal contents. In vitro release profiles of polyphosphazene-linked conjugates of erlotinib have been studied at pH 1.2, pH 6.8 and pH 7.4. The stability study was designed to exhibit that free drug was released proficiently and unmodified from polyphosphazene-erlotinib conjugates having aromatic azo-bond in artificial colon conditions. Results: The synthesized conjugates were demonstrated to be stable in simulated upper gastro-intestinal tract conditions. The drug release kinetics shows that all the polymer-drug conjugates of erlotinib follow zero-order release kinetics which indicates that the drug release from the polymeric backbone is independent of its concentration. Kinetic study of conjugates with slope (n) shows the anomalous type of release with an exponent (n) > 0.89 indicating a super case II type of release. Conclusion: These studies indicate that polyphosphazene linked drug conjugates of erlotinib could be the promising candidates for the site-specific treatment of colon cancer with least detrimental side-effects.

scholarly journals Synthesis and Evaluation of AlgNa-g-poly(QCL-co-HEMA) Hydrogels as Platform for Chondrocyte Proliferation and Controlled Release of Betamethasone

2021 ◽  
Vol 22 (11) ◽  
pp. 5730
Author(s):  
Jomarien García-Couce ◽  
Marioly Vernhes ◽  
Nancy Bada ◽  
Lissette Agüero ◽  
Oscar Valdés ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Controlled Release ◽  
Biomedical Applications ◽  
Release Kinetics ◽  
Cell Types ◽  
Tissue Engineering Scaffolds ◽  
Almost All ◽  
Scanning Electron

Hydrogels obtained from combining different polymers are an interesting strategy for developing controlled release system platforms and tissue engineering scaffolds. In this study, the applicability of sodium alginate-g-(QCL-co-HEMA) hydrogels for these biomedical applications was evaluated. Hydrogels were synthesized by free-radical polymerization using a different concentration of the components. The hydrogels were characterized by Fourier transform-infrared spectroscopy, scanning electron microscopy, and a swelling degree. Betamethasone release as well as the in vitro cytocompatibility with chondrocytes and fibroblast cells were also evaluated. Scanning electron microscopy confirmed the porous surface morphology of the hydrogels in all cases. The swelling percent was determined at a different pH and was observed to be pH-sensitive. The controlled release behavior of betamethasone from the matrices was investigated in PBS media (pH = 7.4) and the drug was released in a controlled manner for up to 8 h. Human chondrocytes and fibroblasts were cultured on the hydrogels. The MTS assay showed that almost all hydrogels are cytocompatibles and an increase of proliferation in both cell types after one week of incubation was observed by the Live/Dead® assay. These results demonstrate that these hydrogels are attractive materials for pharmaceutical and biomedical applications due to their characteristics, their release kinetics, and biocompatibility.

scholarly journals Formulation and development of metformin-loaded microspheres using Khaya senegalensis (Meliaceae) gum as co-polymer

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Chukwuebuka H. Ozoude ◽  
Chukwuemeka P. Azubuike ◽  
Modupe O. Ologunagba ◽  
Sejoro S. Tonuewa ◽  
Cecilia I. Igwilo
Keyword(s):  
Controlled Release ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
Drug Carrier ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Metformin Hydrochloride ◽  
Scanning Calorimetry ◽  
Khaya Senegalensis

Abstract Background Khaya gum is a bark exudate from Khaya senegalensis (Maliaecae) that has drug carrier potential. This study aimed to formulate and comparatively evaluate metformin-loaded microspheres using blends of khaya gum and sodium alginate. Khaya gum was extracted and subjected to preformulation studies using established protocols while three formulations (FA; FB and FC) of metformin (1% w/v)-loaded microspheres were prepared by the ionic gelation method using 5% zinc chloride solution as the cross-linker. The formulations contained 2% w/v blends of khaya gum and sodium alginate in the ratios of 2:3, 9:11, and 1:1, respectively. The microspheres were evaluated by scanning electron microscopy, Fourier transform-infrared spectroscopy, differential scanning calorimetry, entrapment efficiency, swelling index, and in vitro release studies. Results Yield of 28.48%, pH of 4.00 ± 0.05, moisture content (14.59% ± 0.50), and fair flow properties (Carr’s index 23.68 ± 1.91 and Hausner’s ratio 1.31 ± 0.03) of the khaya gum were obtained. FTIR analyses showed no significant interaction between pure metformin hydrochloride with excipients. Discrete spherical microspheres with sizes ranging from 1200 to 1420 μm were obtained. Drug entrapment efficiency of the microspheres ranged from 65.6 to 81.5%. The release of the drug from microspheres was sustained for the 9 h of the study as the cumulative release was 62% (FA), 73% (FB), and 80% (FC). The release kinetics followed Korsmeyer-Peppas model with super case-II transport mechanism. Conclusion Blends of Khaya senegalensis gum and sodium alginate are promising polymer combination for the preparation of controlled-release formulations. The blend of the khaya gum and sodium alginate produced microspheres with controlled release properties. However, the formulation containing 2:3 ratio of khaya gum and sodium alginate respectively produced microspheres with comparable controlled release profiles to the commercial brand metformin tablet.

scholarly journals pH-Responsive Release of Ruthenium Metallotherapeutics from Mesoporous Silica-Based Nanocarriers

Pharmaceutics ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 460
Author(s):  
Minja Mladenović ◽  
Ibrahim Morgan ◽  
Nebojša Ilić ◽  
Mohamad Saoud ◽  
Marija V. Pergal ◽  
...  
Keyword(s):  
Drug Delivery ◽  
Mesoporous Silica ◽  
Inductively Coupled Plasma ◽  
Drug Delivery Systems ◽  
Mesoporous Silica Nanoparticles ◽  
Release Kinetics ◽  
Delivery Systems ◽  
Emission Spectrometry ◽  
Ph Responsive

Ruthenium complexes are attracting interest in cancer treatment due to their potent cytotoxic activity. However, as their high toxicity may also affect healthy tissues, efficient and selective drug delivery systems to tumour tissues are needed. Our study focuses on the construction of such drug delivery systems for the delivery of cytotoxic Ru(II) complexes upon exposure to a weakly acidic environment of tumours. As nanocarriers, mesoporous silica nanoparticles (MSN) are utilized, whose surface is functionalized with two types of ligands, (2-thienylmethyl)hydrazine hydrochloride (H1) and (5,6-dimethylthieno[2,3-d]pyrimidin-4-yl)hydrazine (H2), which were attached to MSN through a pH-responsive hydrazone linkage. Further coordination to ruthenium(II) center yielded two types of nanomaterials MSN-H1[Ru] and MSN-H2[Ru]. Spectrophotometric measurements of the drug release kinetics at different pH (5.0, 6.0 and 7.4) confirm the enhanced release of Ru(II) complexes at lower pH values, which is further supported by inductively coupled plasma optical emission spectrometry (ICP-OES) measurements. Furthermore, the cytotoxicity effect of the released metallotherapeutics is evaluated in vitro on metastatic B16F1 melanoma cells and enhanced cancer cell-killing efficacy is demonstrated upon exposure of the nanomaterials to weakly acidic conditions. The obtained results showcase the promising capabilities of the designed MSN nanocarriers for the pH-responsive delivery of metallotherapeutics and targeted treatment of cancer.

Formulation and Evaluation of Mucoadhesive Floating Microspheres of Repaglinide

2021 ◽  
pp. 5673-5679
Author(s):  
S. Sivaprasad ◽  
V. Alagarsamy ◽  
M. Prathibha Bharathi ◽  
P.V. Murali Krishna ◽  
K. Sandeeep Kanna
Keyword(s):  
Controlled Release ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Extended Period ◽  
Entrapment Efficiency ◽  
Sustain Release ◽  
S 100 ◽  
Eudragit S 100 ◽  
Good Flow

The main objective of the present study was to design a controlled release dosage form for an oral anti diabetic drug i.e. repaglinide employing polymers like eudragit s- 100. One of the other objective of this present study was to increase the biological half-life the drug by formulating into microspheres. The microspheres of repaglinide were prepared by solvent evaporation method by using eudragit s-100 and ethyl cellulose as polymers with different concentrations. Formulations (F1-F10) were prepared and evaluated for various micrometric properties and it was observed that though all the formulations were exhibited good flow properties, The F5 formulation exhibits higher in- vitro buoyancy time and entrapment efficiency which is considered for in- vitro and mucoadhesive studies. The FTIR results reveal that there was no interaction between the drug and the excipients. The in- vitro release profiles of F1-F5 indicated that all formulations showed controlled release over an extended period, with acceptable release kinetics. Among the all formulations F5 were considered as a promising candidate for sustain release of repaglinide.

scholarly journals DESIGN AND EVALUATION OF CONTROLLED-RELEASE OCULAR INSERTS OF BRIMONIDINE-TARTRATE AND TIMOLOL MALEATE

2016 ◽  
Vol 9 (1) ◽  
pp. 79 ◽  
Author(s):  
Preethi G. B. ◽  
Prashanth Kunal
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Sodium Alginate ◽  
Calcium Chloride ◽  
Release Kinetics ◽  
Water Soluble ◽  
Moisture Loss ◽  
Timolol Maleate ◽  
Brimonidine Tartrate

<p><strong>Objective: </strong>The current work was attempted to formulate and evaluate a controlled-release matrix-type ocular inserts containing a combination of brimonidine tartrate and timolol maleate, with a view to sustain the drug release in the cul-de-sac of the eye.<strong></strong></p><p><strong>Methods: </strong>Initially, the infrared studies were done to determine the drug–polymer interactions. Sodium alginate-loaded ocuserts were prepared by solvent casting technique. Varying the concentrations of polymer—sodium alginate, plasticizer—glycerine, and cross-linking agent—calcium chloride by keeping the drug concentration constant, made a total of nine formulations. These formulations were evaluated for its appearance, drug content, weight uniformity, thickness uniformity, percentage moisture loss, percentage moisture absorption, and <em>in vitro </em>release profile of the ocuserts. Finally, accelerated stability studies and the release kinetics were performed on the optimised formulation.<strong></strong></p><p><strong>Results: </strong>It was perceived that polymer, plasticizer, and calcium chloride had a significant influence on the drug release. The data obtained from the formulations showed that formulation—F9 was the optimised formulation, which exhibited better drug release. The release data of the optimised formulation tested on the kinetic models revealed that it exhibited first-order release kinetics. <strong></strong></p><p><strong>Conclusion: </strong>It can be concluded that a natural bioadhesive hydrophilic polymer such as sodium alginate can be used as a film former to load water soluble and hydrophilic drugs like brimonidine tartrate and timolol maleate. Among all formulations, F9 with 400 mg sodium alginate, 2% calcium chloride and 60 mg glycerin were found to be the most suitable insert in terms of appearance, ease of handling, thickness, <em>in vitro</em> drug release and stability.</p>

Sign in / Sign up

Export Citation Format

Share Document