scholarly journals Lime-cement textile reinforced mortar (TRM) with modified interphase

2019 ◽  
Vol 17 (1) ◽  
pp. 228080001982782
Author(s):  
Cesare Signorini ◽  
Antonella Sola ◽  
Andrea Nobili ◽  
Cristina Siligardi
Keyword(s):  
Mechanical Performance ◽  
Tensile Tests ◽  
Pozzolanic Reaction ◽  
Woven Fabric ◽  
Uniaxial Tensile ◽  
Coated Fabric ◽  
The Matrix ◽  
Micro Silica ◽  
Hybrid Carbon ◽  
Textile Reinforced Mortar

Background: Lack of interphase compatibility between the fabric and the matrix significantly impairs the load-bearing capacity of textile reinforced mortar (TRM). In this study, we consider the application of two inorganic surface coatings for enhancing the interphase bond properties. Methods: Either of two silica-based coatings, namely nano- and micro-silica, were applied to alkali-resistant glass (ARG) and to hybrid carbon–ARG woven fabric. Mechanical performance of TRM reinforced with the uncoated and the coated fabric was compared in uniaxial tensile tests. Results: Mechanical testing provides evidence of a remarkable enhancement in terms of ultimate strength and deformability for the coated specimens. This effect can be ascribed to the improved hydrophilicity of the fibers’ surface and to the activation of pozzolanic reaction at the interphase. In addition, penetration of nano- and microparticles in the bundle of the textile yarns reduces the occurrence of telescopic failure.

Mechanical properties of Precontraint 1202 S2 based on uniaxial tensile and creep tests

2016 ◽  
Vol 36 (4) ◽  
pp. 254-270 ◽  
Author(s):  
Andrzej Ambroziak ◽  
Paweł Kłosowski
Keyword(s):  
Mechanical Properties ◽  
Polyvinyl Chloride ◽  
Viscoelastic Model ◽  
Tensile Tests ◽  
Woven Fabric ◽  
Uniaxial Tensile ◽  
Creep Tests ◽  
Linear Elastic ◽  
Coated Fabric ◽  
Long Time

The purpose of the paper is the estimation of the polyvinyl chloride – polyester-coated fabric (Precontraint 1202 S2) mechanical properties under uniaxial tensile tests as well as short- and long-time creep tests. The uniaxial tests are the basis of non-linear elastic description while the creep tests are used for the evaluation of the stiffness parameters in time and for the identification of the standard viscoelastic model. The paper also includes a short survey of literature concerning the coated woven fabric description.

Experimental study on uniaxial tensile and welding performance of a new coated fabric for airship envelopes

2016 ◽  
Vol 46 (7) ◽  
pp. 1474-1497 ◽  
Author(s):  
Fengxin Wang ◽  
Yonglin Chen ◽  
Wen Xu ◽  
Zhensen Song ◽  
Gongyi Fu
Keyword(s):  
Tensile Tests ◽  
Ultimate Tensile Stress ◽  
Woven Fabric ◽  
Uniaxial Tensile ◽  
Elongation Ratio ◽  
Coated Fabric ◽  
Polyethylene Fiber ◽  
Tremendous Amount ◽  
Ultra High Molecular Weight ◽  
Good Agreement

This paper investigated the mechanical properties of GQ-6 subjected to a tremendous amount of uniaxial tests. Such material is a new kind of ultra high molecular weight polyethylene fiber and aimed to be adopted in stratospheric airship. To begin with, mono-uniaxial tensile tests were conducted. The cycling-uniaxial tensile experiments were then carried out on the basis of the mono-uniaxial tensile tests data. Finally, performances of welding seams were thoroughly investigated with forty welding specimens. Results of mono-uniaxial tensile tests revealed that such woven fabric possesses high tensile strength and low elongation ratio at break. Meanwhile, the stress–strain behaviors were fitted by the Ogden model and a good agreement between such model and experimental data was obtained. Influences of the uniaxial loading cycle on such woven stiffness were discussed and the elastic moduli were defined with a standard hysteresis loop. For the welding tests, four types of overlapping welding failures were discovered. Compared with intact specimens, an appropriate welding width of 60 mm and an approximate 15% discount of the ultimate tensile stress on the intact textile were obtained.

Mechanical properties of PVDF-coated fabric under tensile tests

2015 ◽  
Vol 35 (4) ◽  
pp. 377-390 ◽  
Author(s):  
Andrzej Ambroziak
Keyword(s):  
Mechanical Properties ◽  
Polyvinylidene Fluoride ◽  
Cyclic Load ◽  
Tensile Tests ◽  
Woven Fabrics ◽  
Uniaxial Tensile ◽  
Cyclic Tests ◽  
Comprehensive Investigation ◽  
Coated Fabric ◽  
Coated Fabrics

Abstract This article describes the laboratory tests necessary to identify the mechanical properties of the polyvinylidene fluoride (PVDF)-coated fabrics named Precontraint 1202S and Precontraint 1302S. First, a short survey of the literature concerning the description of coated woven fabrics is presented. Second, the material parameters for PVDF-coated fabrics are specified on the basis of biaxial tensile tests. A comparison of the 1:1 biaxial and the uniaxial tensile tests results is also given. Additionally, biaxial cyclic tests were performed to observe the change of immediate mechanical properties under cyclic load. The article is aimed as an introduction to a comprehensive investigation of the mechanical properties of coated fabrics.

scholarly journals Fabrication of Nanopore in MoS2-Graphene vdW Heterostructure by Ion Beam Irradiation and the Mechanical Performance

Nanomaterials ◽  
2022 ◽  
Vol 12 (2) ◽  
pp. 196
Author(s):  
Xin Wu ◽  
Ruxue Yang ◽  
Xiyue Chen ◽  
Wei Liu
Keyword(s):  
Mechanical Performance ◽  
Ion Irradiation ◽  
Ion Beam ◽  
Tensile Tests ◽  
Uniaxial Tensile ◽  
Beam Irradiation ◽  
Ion Beam Irradiation ◽  
Stacking Order ◽  
Vdw Heterostructure ◽  
Nanopore Structure

Nanopore structure presents great application potential especially in the area of biosensing. The two-dimensional (2D) vdW heterostructure nanopore shows unique features, while research around its fabrication is very limited. This paper proposes for the first time the use of ion beam irradiation for creating nanopore structure in 2D vdW graphene-MoS2 heterostructures. The formation process of the heterostructure nanopore is discussed first. Then, the influence of ion irradiation parameters (ion energy and ion dose) is illustrated, based on which the optimal irradiation parameters are derived. In particular, the effect of stacking order of the heterostructure 2D layers on the induced phenomena and optimal parameters are taken into consideration. Finally, uniaxial tensile tests are conducted by taking the effect of irradiation parameters, nanopore size and stacking order into account to demonstrate the mechanical performance of the heterostructure for use under a loading condition. The results would be meaningful for expanding the applications of heterostructure nanopore structure, and can arouse more research interest in this area.

scholarly journals Uniaxial Tensile Behavior of Carbon Textile Reinforced Mortar

Materials ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 374 ◽  
Author(s):  
Fen Zhou ◽  
Huanhui Liu ◽  
Yunxing Du ◽  
Lingling Liu ◽  
Deju Zhu ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Bond Strength ◽  
Volume Fraction ◽  
Tensile Tests ◽  
Optical Microscope ◽  
Tensile Behavior ◽  
Reinforcement Ratio ◽  
Steel Fibers ◽  
Uniaxial Tensile ◽  
Textile Reinforced Mortar

This paper investigates the effects of the reinforcement ratio, volume fraction of steel fibers, and prestressing on the uniaxial tensile behavior of carbon textile reinforced mortar (CTRM) through uniaxial tensile tests. The results show that the tensile strength of CTRM specimens increases with the reinforcement ratio, however the textile–matrix bond strength becomes weaker and debonding can occur. Short steel fibers are able to improve the mechanical properties of the entire CTRM composite and provide additional “shear resistant ability” to enhance the textile– matrix bond strength, resulting in finer cracks with smaller spacing and width. Investigations into the fracture surfaces using an optical microscope clarify these inferences. Increases in first-crack stress and tensile strength are also observed in prestressed TRM specimens. In this study, the combination of 1% steel fibers and prestressing at 15% of the ultimate tensile strength of two-layer textiles is found to be the optimum configuration, producing the highest first-crack stress and tensile strength and the most reasonable multi-cracking pattern.

A Simple Discrete Method for the Simulation of the Preforming of Woven Fabric Reinforcement

2012 ◽  
Vol 504-506 ◽  
pp. 213-218 ◽  
Author(s):  
Walid Najjar ◽  
Xavier Legrand ◽  
Cedric Pupin ◽  
Philippe Dal Santo ◽  
Serge Boude
Keyword(s):  
Inverse Method ◽  
Shear Stiffness ◽  
Tensile Tests ◽  
Woven Fabric ◽  
Uniaxial Tensile ◽  
Plane Shear ◽  
Discrete Method ◽  
Shell Elements ◽  
Woven Reinforcement ◽  
Good Agreement

In this paper, a discrete approach for the simulation of the preforming of dry woven reinforcement is proposed. A “unit cell” is built using elastic isotropic shells and axial connectors instead of bars and beams used in previous studies. Shell elements are used to take into account the in-plane shear stiffness and to manage contact phenomenon with the punch and die. Connectors reinforce the structure in the yarn directions and naturally capture the specific behavior of the fabric. To identify the material parameters, uniaxial tensile tests and bias tests have been employed. A numerical algorithm, coupling Matlab and Abaqus/Explicit, is used to determine the shear parameters by an inverse method. The model has been implemented in Abaqus to simulate hemispherical stamping. Experimental results are compared to numerical simulations, good agreement between both results is shown.

Micromechanical theory and uniaxial tensile tests of fiber reinforced cement composites

1991 ◽  
Vol 6 (11) ◽  
pp. 2463-2473 ◽  
Author(s):  
C.C. Yang ◽  
T. Mura ◽  
S.P. Shah
Keyword(s):  
Volume Fraction ◽  
Tensile Tests ◽  
Uniaxial Tensile ◽  
Cement Composites ◽  
Matrix Composites ◽  
Fiber Reinforced ◽  
Theoretical Predictions ◽  
The Matrix ◽  
Reinforced Cement ◽  
Fracture Arrest

The mechanism of fracture arrest in brittle-matrix composites with strong, long fibers is analyzed by using the inclusion method. The maximum stress contribution of the matrix in composites is discussed in this paper. A critical volume fraction of fibers fc is theoretically derived. If the volume fraction f is less than fc, then debonding between fibers and matrix occurs before the crack propagates through the whole section. If f is greater than fc, then no debonding occurs before the crack propagates through the whole section. The value of fc depends on the matrix and fiber properties and the bond character of the interface. To verify the analytical predictions, experiments on fiber reinforced cement composites subjected to uniaxial tension were conducted. The results of the theoretical predictions were also compared satisfactorily with other published experimental data.

scholarly journals Optimisation of optical fibre using micro-braiding for structural health monitoring

2018 ◽  
Vol 30 (2) ◽  
pp. 171-185 ◽  
Author(s):  
Olubukola Rufai ◽  
Mayank Gautam ◽  
Prasad Potluri ◽  
Matthieu Gresil
Keyword(s):  
Structural Health Monitoring ◽  
Optical Fibre ◽  
Health Monitoring ◽  
Mechanical Performance ◽  
Tensile Tests ◽  
Uniaxial Tensile ◽  
Optical Fibres ◽  
Structural Health ◽  
Three Point Bend Test ◽  
Point Bend

Structural health monitoring is a fast growing area used to assess the state of various structures such as aircraft, building, bridge, wind turbine, pipe, automobile through appropriate data processing and interpretation. This article presents a novel technique of optimising the conventional optical fibres used for structural health monitoring, in order to improve their mechanical properties, and handling during the manufacturing process by micro-braiding the optical fibres. This study investigates and compares the tensile properties of the both micro-braided optical fibre and conventional optical fibres through uniaxial tensile tests. Experimental results show 85% improvement in strain at failure for the micro-braided optical fibre when compared to the optical fibres. Moreover, interfacial shear strength comparison, of the braiding yarn, between optical fibres and micro-braided optical fibre (carried out through micro-bond test) has also been conducted. In addition, the effect of embedding both micro-braided and conventional optical fibre in composite was also investigated by three-point bend test. Overall, the mechanical performance of the composite was not affected by the presence of micro-braided optical fibre. This article will also discuss the process and the advantage of micro-braided optical fibre for structural health monitoring.

Textile Reinforced Mortar at High Temperatures

2011 ◽  
Vol 82 ◽  
pp. 202-207 ◽  
Author(s):  
Isabella Colombo ◽  
Matteo Colombo ◽  
Anna Magri ◽  
Giulio Zani ◽  
Marco di Prisco
Keyword(s):  
High Temperatures ◽  
Strength Loss ◽  
Tensile Tests ◽  
Concrete Cover ◽  
Glass Fabric ◽  
Maximum Temperature ◽  
Uniaxial Tensile ◽  
Thermal Thresholds ◽  
Stabilization Phase ◽  
Textile Reinforced Mortar

Textile Reinforced Mortar (TRM) is a composite made by fine grained matrix and glass fabric reinforcement. The main advantages of this material are the reinforcement orientation in the tensile stress direction, no concrete cover requirement against corrosion and the capability to produce thin and light weight elements. Special attention was given by researchers to the time dependent loss in strength of AR-glass reinforcement embedded in a cement based matrix. Some research has shown durability models to calculate the amount to the strength loss related to material, humidity and temperature. Nevertheless, the behaviour of TRM when exposed to high temperature requires further investigations. A suitable experimental programme was planned to investigate the behaviour of TRM when exposed to high temperatures. Uniaxial tensile tests were performed after thermal cycle on 400 mm x 70 mm specimens 6 mm thick, reinforced with 2 layer of AR-glass fabric. Several thermal thresholds (20, 200, 400 and 600°C) were considered for the mechanical characterization in fire condition. Thermal cycles were performed in an oven using a heating rate of 30°C/h up to the maximum temperature and by a cooling branch at 15°C/h after a stabilization phase at the maximum temperature.

scholarly journals Characterization of Titanium Metal Matrix Composites (Ti-MMC) Made Using Different Manufacturing Routes

2021 ◽  
Author(s):  
Luigi Sanguigno ◽  
Marcello Antonio Lepore ◽  
Angelo Rosario Maligno
Keyword(s):  
Composite Laminates ◽  
Metal Matrix ◽  
Mechanical Performance ◽  
Tensile Tests ◽  
Morphological Properties ◽  
Elastic Behaviour ◽  
Matrix Composites ◽  
Micromechanical Modelling ◽  
The Matrix

The mechanical and morphological properties of the unidirectional metal matrix composite (MMC) in titanium alloy reinforced with continuous silicon carbide (SiC) fibres are investigated. The lay-up manufacturing process known as the Foil / Fibre (FF) lay-up was compared with the matrix-coated-fibre (CF) method which promises a better final shape of the reinforcing fibre net. Tensile tests were performed to measure mechanical performance of the manufactured MMCs both longitudinally and transversely respect to the direction of SiC fibres. Elastic behaviour of the investigated MMCs was assumed orthotropic and related to mechanical properties and spatial distribution of the MMC constituents: SiC fibres and Titanium (Ti) matrix. This was achieved using micromechanical modelling based on Finite Element (FE) calculations. FE micromechanical modelling was carried out on the Representative Elementary Volume (REV) of the MMC microstructure resolved by non-destructive analysis such as X-Ray tomography. The analysis carried out highlighted and justified mechanical performance difference between composite laminates containing the same amount of SiC reinforcement fibres for unit of volume but made following different manufacturing routes. To compute overall orthotropic behaviour of the MMC laminate, each constituent was assumed as an elastic isotropic heterogeneity during the averaging. This simplify assumption was validated by comparison with experimental data during the mechanical characterization of the investigated MMC composites.

Sign in / Sign up

Export Citation Format

Share Document