scholarly journals Impact of postural variation on hand measurements: Three-dimensional anatomical analysis

PLoS ONE ◽  
2021 ◽  
Vol 16 (4) ◽  
pp. e0250428
Author(s):  
Mei-ying Kwan ◽  
Kit-lun Yick ◽  
Lung Chow ◽  
Annie Yu ◽  
Sun-pui Ng ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Dorsal Side ◽  
Pattern Design ◽  
Skin Deformation ◽  
Finger Length ◽  
Hand Functions ◽  
Full Color ◽  
Web Space ◽  
The Impact ◽  
The Web

In this article, the impact of postural variations on hand anthropometry and distribution of skin strain ratios has been investigated. The literature suggests the glove fit directly affects hand functions. However, gloves currently manufactured based on a static posture failed to provide optimum fit. Workers often do not wear protective gloves due to discomfort caused by improper design, which increases the risk of hand injury. Full-color three-dimensional scans of the hands are captured with thirty healthy subjects (20 females, 10 males) to analyze the hand measurements and skin deformation with various postures. 42 of the 57 hand dimensions were found to have significant differences (p >0.05) related to hand posture. The skin strain ratios further suggest that the slant of the web space, dorsal-length and surface area should be increased, while the angles of the web space and length of the palm reduced to advance glove patterns. This research contributes to constructing gloves with optimum fit, performance, and comfort. Results show that in consideration of hand postures, the angle of the slant of web space between digits 2 and 5 and the finger length on the dorsal side should be increased, whilst the finger length on the palm side should be reduced in glove pattern design. Gloves currently constructed based on a splayed posture cannot provide a good fit. Consideration should be given to hand measurements in dynamic postures.

scholarly journals An Assessment of The Web Presence of Top 10 University in Southeast Asia

2019 ◽  
Vol 8 (9) ◽  
pp. 3316-3319
Keyword(s):  
Southeast Asia ◽  
Early Stage ◽  
Analysis Method ◽  
Web Presence ◽  
Web Structure ◽  
Web Crawlers ◽  
Web Space ◽  
The University ◽  
The Impact ◽  
The Web

The web presenceis said to be one of the factors a university to be visible in the web space. This study aims to assess Southeast Asia universities on the web space and expose the impact of universities online presence to the rank of the universities in the Southeast Asia region. The contribution of universities website in indicating the performance of the university by using the webometrics analysis method has not been widely done yet by other researchers.The use of webometrics analysis in determining the level of visibility of a web domain is still onthe early stage. To gather information about web links and visibility, search engine and web crawlers was used as well as webometrics analysisand web mention in analyzing the web presence and influence. Scatter plotwas generated to have a better insight of the analysis result. In summary, the study shows the involvement of the universities website on the web space does not give a directimpact to the ranking of the university in the world but the web mention by Wikipedia to the universities do have an impact. The use of webometrics analysis and web mention to study the web structure of an institution is possible.

Analyzing the Impact of X-Ray Tomography on the Reliability of Integrated Circuits

2015 ◽  
Author(s):  
Halit Dogan ◽  
Md Mahbub Alam ◽  
Navid Asadizanjani ◽  
Sina Shahbazmohamadi ◽  
Domenic Forte ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
3D Imaging ◽  
Three Dimensional ◽  
Serial Sectioning ◽  
Promising Technique ◽  
Flash Memories ◽  
X Ray ◽  
3D Information ◽  
The Impact

Abstract X-ray tomography is a promising technique that can provide micron level, internal structure, and three dimensional (3D) information of an integrated circuit (IC) component without the need for serial sectioning or decapsulation. This is especially useful for counterfeit IC detection as demonstrated by recent work. Although the components remain physically intact during tomography, the effect of radiation on the electrical functionality is not yet fully investigated. In this paper we analyze the impact of X-ray tomography on the reliability of ICs with different fabrication technologies. We perform a 3D imaging using an advanced X-ray machine on Intel flash memories, Macronix flash memories, Xilinx Spartan 3 and Spartan 6 FPGAs. Electrical functionalities are then tested in a systematic procedure after each round of tomography to estimate the impact of X-ray on Flash erase time, read margin, and program operation, and the frequencies of ring oscillators in the FPGAs. A major finding is that erase times for flash memories of older technology are significantly degraded when exposed to tomography, eventually resulting in failure. However, the flash and Xilinx FPGAs of newer technologies seem less sensitive to tomography, as only minor degradations are observed. Further, we did not identify permanent failures for any chips in the time needed to perform tomography for counterfeit detection (approximately 2 hours).

scholarly journals Numerical simulation of the impact of an integrated renovation project on the Maowei Sea hydrodynamic environment

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Cui Wang ◽  
Ling Cai ◽  
Yaojian Wu ◽  
Yurong Ouyang
Keyword(s):  
Water Exchange ◽  
Land Reclamation ◽  
Three Dimensional ◽  
Exchange Capacity ◽  
Reclamation Project ◽  
Hydrodynamic Environment ◽  
Sea Area ◽  
Water Quality Models ◽  
The Impact ◽  
Main Factor

AbstractIntegrated renovation projects are important for marine ecological environment protection. Three-dimensional hydrodynamics and water quality models are developed for the Maowei Sea to assess the hydrodynamic environment base on the MIKE3 software with high resolution meshes. The results showed that the flow velocity changed minimally after the project, decreasing by approximately 0.12 m/s in the east of the Maowei Sea area and increasing by approximately 0.01 m/s in the northeast of the Shajing Port. The decrease in tidal prism (~ 2.66 × 106 m3) was attributed to land reclamation, and accounted for just 0.86% of the pre-project level. The water exchange half-life increased by approximately 1 day, implying a slightly reduced water exchange capacity. Siltation occurred mainly in the reclamation and dredging areas, amounting to back-silting of approximately 2 cm/year. Reclamation project is the main factor causing the decrease of tidal volume and weakening the hydrodynamics in Maowei Sea. Adaptive management is necessary for such a comprehensive regulation project. According to the result, we suggest that reclamation works should strictly prohibit and dredging schemes should optimize in the subsequent regulation works.

scholarly journals Mechanical Behavior of Hydroxyapatite-Chitosan Composite: Effect of Processing Parameters

Minerals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 213
Author(s):  
Hamid Ait Said ◽  
Hassan Noukrati ◽  
Hicham Ben Youcef ◽  
Ayoub Bayoussef ◽  
Hassane Oudadesse ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Compressive Strength ◽  
Mechanical Strength ◽  
Bone Repair ◽  
Mechanical Stability ◽  
Three Dimensional ◽  
Processing Parameters ◽  
Composite Effect ◽  
Solid Liquid ◽  
The Impact

Three-dimensional hydroxyapatite-chitosan (HA-CS) composites were formulated via solid-liquid technic and freeze-drying. The prepared composites had an apatitic nature, which was demonstrated by X-ray diffraction and Infrared spectroscopy analyses. The impact of the solid/liquid (S/L) ratio and the content and the molecular weight of the polymer on the composite mechanical strength was investigated. An increase in the S/L ratio from 0.5 to 1 resulted in an increase in the compressive strength for HA-CSL (CS low molecular weight: CSL) from 0.08 ± 0.02 to 1.95 ± 0.39 MPa and from 0.3 ± 0.06 to 2.40 ± 0.51 MPa for the HA-CSM (CS medium molecular weight: CSM). Moreover, the increase in the amount (1 to 5 wt%) and the molecular weight of the polymer increased the mechanical strength of the composite. The highest compressive strength value (up to 2.40 ± 0.51 MPa) was obtained for HA-CSM (5 wt% of CS) formulated at an S/L of 1. The dissolution tests of the HA-CS composites confirmed their cohesion and mechanical stability in an aqueous solution. Both polymer and apatite are assumed to work together, giving the synergism needed to make effective cylindrical composites, and could serve as a promising candidate for bone repair in the orthopedic field.

A comparison between the CS-TOF and the CTA/DSA for WEB device management

2021 ◽  
pp. 159101992110147
Author(s):  
Oktay Algin ◽  
Gokhan Yuce ◽  
Ural Koc ◽  
Gıyas Ayberk
Keyword(s):  
Mr Angiography ◽  
Three Dimensional ◽  
Morphological Parameters ◽  
Perfect Agreement ◽  
Device Management ◽  
Web Device ◽  
Sensing Time ◽  
The Web

Purpose There is no study on the role of three-dimensional compressed sensing time of flight MR angiography (3D-CS-TOF) in the management of the WEB device. We evaluated the efficacy of 3-tesla 3D-CS-TOF for the management and follow-up of the WEB device implantations. Materials and methods Seventy-three aneurysms of 69 patients treated with the WEB device were retrospectively examined. Morphological parameters and embolization results of the aneurysms were assessed and compared on 3D-CS-TOF, CTA, and DSA images. Results Occluded, neck remnant, and recurrent aneurysms were observed in 61 (83.6%), 7 (9.6%), and 5 (6.8%) aneurysms, respectively. Inter- and intra-reader agreement values related to aneurysm size measurements were perfect. Aneurysms size, age, and proximal vessel tortuosity were negatively correlated with the visibility of the aneurysms and parent vessels on 3D-CS-TOF images (p = 0.043; p = 0.032; p < 0.001, respectively). Subarachnoid hemorrhage and age are associated with 3D-CS-TOF artifacts (p = 0.031; p = 0.005, respectively). 3D-CS-TOF findings are in perfect agreement with DSA or CT angiography (CTA) results (p < 0.001). Conclusion According to our results, 3D-CS-TOF can be an easy, fast, and reliable alternative for the management or follow-up of WEB assisted embolization.

scholarly journals Impact of inter-reader contouring variability on textural radiomics of colorectal liver metastases

2020 ◽  
Vol 4 (1) ◽  
Author(s):  
Francesco Rizzetto ◽  
Francesca Calderoni ◽  
Cristina De Mattia ◽  
Arianna Defeudis ◽  
Valentina Giannini ◽  
...  
Keyword(s):  
Liver Metastases ◽  
Hausdorff Distance ◽  
Intraclass Correlation ◽  
Three Dimensional ◽  
Liver Lesion ◽  
Dice Coefficient ◽  
Rf Values ◽  
Enhanced Computed Tomography ◽  
Relative Change ◽  
The Impact

Abstract Background Radiomics is expected to improve the management of metastatic colorectal cancer (CRC). We aimed at evaluating the impact of liver lesion contouring as a source of variability on radiomic features (RFs). Methods After Ethics Committee approval, 70 liver metastases in 17 CRC patients were segmented on contrast-enhanced computed tomography scans by two residents and checked by experienced radiologists. RFs from grey level co-occurrence and run length matrices were extracted from three-dimensional (3D) regions of interest (ROIs) and the largest two-dimensional (2D) ROIs. Inter-reader variability was evaluated with Dice coefficient and Hausdorff distance, whilst its impact on RFs was assessed using mean relative change (MRC) and intraclass correlation coefficient (ICC). For the main lesion of each patient, one reader also segmented a circular ROI on the same image used for the 2D ROI. Results The best inter-reader contouring agreement was observed for 2D ROIs according to both Dice coefficient (median 0.85, interquartile range 0.78–0.89) and Hausdorff distance (0.21 mm, 0.14–0.31 mm). Comparing RF values, MRC ranged 0–752% for 2D and 0–1567% for 3D. For 24/32 RFs (75%), MRC was lower for 2D than for 3D. An ICC > 0.90 was observed for more RFs for 2D (53%) than for 3D (34%). Only 2/32 RFs (6%) showed a variability between 2D and circular ROIs higher than inter-reader variability. Conclusions A 2D contouring approach may help mitigate overall inter-reader variability, albeit stable RFs can be extracted from both 3D and 2D segmentations of CRC liver metastases.

scholarly journals 3DIV update for 2021: a comprehensive resource of 3D genome and 3D cancer genome

2020 ◽  
Vol 49 (D1) ◽  
pp. D38-D46
Author(s):  
Kyukwang Kim ◽  
Insu Jang ◽  
Mooyoung Kim ◽  
Jinhyuk Choi ◽  
Min-Seo Kim ◽  
...  
Keyword(s):  
Cell Line ◽  
Large Scale ◽  
Three Dimensional ◽  
Cancer Cell Line ◽  
Cancer Genome ◽  
Structural Variations ◽  
3D Genome ◽  
Tightly Coupled ◽  
Regulatory Effects ◽  
The Impact

Abstract Three-dimensional (3D) genome organization is tightly coupled with gene regulation in various biological processes and diseases. In cancer, various types of large-scale genomic rearrangements can disrupt the 3D genome, leading to oncogenic gene expression. However, unraveling the pathogenicity of the 3D cancer genome remains a challenge since closer examinations have been greatly limited due to the lack of appropriate tools specialized for disorganized higher-order chromatin structure. Here, we updated a 3D-genome Interaction Viewer and database named 3DIV by uniformly processing ∼230 billion raw Hi-C reads to expand our contents to the 3D cancer genome. The updates of 3DIV are listed as follows: (i) the collection of 401 samples including 220 cancer cell line/tumor Hi-C data, 153 normal cell line/tissue Hi-C data, and 28 promoter capture Hi-C data, (ii) the live interactive manipulation of the 3D cancer genome to simulate the impact of structural variations and (iii) the reconstruction of Hi-C contact maps by user-defined chromosome order to investigate the 3D genome of the complex genomic rearrangement. In summary, the updated 3DIV will be the most comprehensive resource to explore the gene regulatory effects of both the normal and cancer 3D genome. ‘3DIV’ is freely available at http://3div.kr.

scholarly journals The effect of the outlet angle β2 on the thermomechanical behavior of a centrifugal compressor blade

2020 ◽  
Vol 29 (1) ◽  
pp. 1-8
Author(s):  
Ahmed Allali ◽  
Sadia Belbachir ◽  
Ahmed Alami ◽  
Belhadj Boucham ◽  
Abdelkader Lousdad
Keyword(s):  
Mechanical Behavior ◽  
Centrifugal Compressor ◽  
Three Dimensional ◽  
Complex Form ◽  
Compressor Blade ◽  
Stress Fields ◽  
The Finite Element Method ◽  
Mechanical Fatigue ◽  
Outlet Angle ◽  
The Impact

AbstractThe objective of this work lies in the three-dimensional study of the thermo mechanical behavior of a blade of a centrifugal compressor. Numerical modeling is performed on the computational code "ABAQUS" based on the finite element method. The aim is to study the impact of the change of types of blades, which are defined as a function of wheel output angle β2, on the stress fields and displacements coupled with the variation of the temperature.This coupling defines in a realistic way the thermo mechanical behavior of the blade where one can note the important concentrations of stresses and displacements in the different zones of its complex form as well as the effects at the edges. It will then be possible to prevent damage and cracks in the blades of the centrifugal compressor leading to its failure which can be caused by the thermal or mechanical fatigue of the material with which the wheel is manufactured.

scholarly journals A guideline for 3D printing terminology in biomedical research utilizing ISO/ASTM standards

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Amy E. Alexander ◽  
Nicole Wake ◽  
Leonid Chepelev ◽  
Philipp Brantner ◽  
Justin Ryan ◽  
...  
Keyword(s):  
3D Printing ◽  
Medical Literature ◽  
Three Dimensional ◽  
Physical Object ◽  
Medical Community ◽  
Layer By Layer ◽  
Digital File ◽  
Standardized Terminology ◽  
Standard Terms ◽  
The Impact

AbstractFirst patented in 1986, three-dimensional (3D) printing, also known as additive manufacturing or rapid prototyping, now encompasses a variety of distinct technology types where material is deposited, joined, or solidified layer by layer to create a physical object from a digital file. As 3D printing technologies continue to evolve, and as more manuscripts describing these technologies are published in the medical literature, it is imperative that standardized terminology for 3D printing is utilized. The purpose of this manuscript is to provide recommendations for standardized lexicons for 3D printing technologies described in the medical literature. For all 3D printing methods, standard general ISO/ASTM terms for 3D printing should be utilized. Additional, non-standard terms should be included to facilitate communication and reproducibility when the ISO/ASTM terms are insufficient in describing expository details. By aligning to these guidelines, the use of uniform terms for 3D printing and the associated technologies will lead to improved clarity and reproducibility of published work which will ultimately increase the impact of publications, facilitate quality improvement, and promote the dissemination and adoption of 3D printing in the medical community.

Approach to Quantify the Impact of Disruptions on Traffic Conditions using Dynamic Weighted Resilience Metrics of Transport Networks

2021 ◽  
pp. 036119812199866 ◽  
Author(s):  
Elise Henry ◽  
Angelo Furno ◽  
Nour-Eddin El Faouzi
Keyword(s):  
Three Dimensional ◽  
Traffic Load ◽  
Transport Networks ◽  
Traffic Conditions ◽  
Probe Vehicle ◽  
Vehicle Data ◽  
Network Operations ◽  
Network States ◽  
The Impact ◽  
Proper Operation

Transport networks are essential for societies. Their proper operation has to be preserved to face any perturbation or disruption. It is therefore of paramount importance that the modeling and quantification of the resilience of such networks are addressed to ensure an acceptable level of service even in the presence of disruptions. The paper aims at characterizing network resilience through weighted degree centrality. To do so, a real dataset issued from probe vehicle data is used to weight the graph by the traffic load. In particular, a set of disrupted situations retrieved from the study dataset is analyzed to quantify the impact on network operations. Results demonstrate the ability of the proposed metrics to capture traffic dynamics as well as their utility for quantifying the resilience of the network. The proposed methodology combines different metrics from the complex networks theory (i.e., heterogeneity, density, and symmetry) computed on temporal and weighted graphs. Time-varying traffic conditions and disruptions are analyzed by providing relevant insights on the network states via three-dimensional maps.

Sign in / Sign up

Export Citation Format

Share Document