Ekstrak bonggol nanas cayenne menghambat pertumbuhan Candida albicans pada plat resin akrilik heat curing Hump extract of cayenne pineapple inhibit the growth of Candida albicans on heat cured acrylic resin plate

Hump of pineapple is one of traditional medicines found in Indonesia, containing many enzyme bromelains that canparse complex protein molecules into simpler compounds. The enzyme bromelain can inhibit the growth of Candidaalbicans. The increasing of colonies of C.albicans could be due to the increased use of denture. This study shouldexplore effectiveness of hump concentration of cayenne pineapple against C.albicans growth at 30 heat curing acrylicresin plates sized 10 x 10 x 2 mm. The plates immersed in 10 ml of C.albicans and incubated for 24 hours at 37°C. Theplates were divided into 6 groups, subsequently 5 acrylic resin plates, which were soaked for 8 hours at roomtemperature in an hump extract of cayenne pineapple with the concentration of 5%, 15%, 25%, 35%, and 45%.Negative control was soaked in distilled water. 0.01 ml of a 10-3dilution and dropped into the media sabouraunddextrose agar (SDA), and then incubated for 48 hours at 37°C, and counted the number of C.albicans colonies. Analyzed with ANOVA and LSD test, it was known a significant difference of hump extract of cayenne pineapple 5%,15%, 25%, 35%, and 45% against C.albicans growth (p <0,05). On from this fact, it was concluded that hump extractof cayenne pineapple can inhibit the growth of C.albicans, which is effective at a concentration of at least 15%.

Download Full-text

Aktivitas Antifungi Air Perasan Bawang Merah (Allium ascalonicum L.) Terhadap Candida albicans Secara In Vitro

Jurnal Ilmu Kedokteran ◽

10.26891/jik.v9i2.2015.71-77 ◽

2017 ◽

Vol 9 (2) ◽

pp. 71

Author(s):

Nurhasanah Nurhasanah ◽

Fauzia Andrini ◽

Yulis Hamidy

Keyword(s):

Candida Albicans ◽

Antifungal Activity ◽

Allium Sativum ◽

Fungicidal Activity ◽

Positive Control ◽

Negative Control ◽

Randomized Design ◽

Significant Difference ◽

Completely Randomized Design

Shallot (Allium ascalonicum L.) has been known as traditional medicine. Shallot which has same genus with garlic(Allium sativum L.) contains allicin that is also found in garlic and has been suspected has fungicidal activity toCandida albicans. It is supported by several researches. Therefore, shallot is suspected has antifungal activity too.The aim of this research was to know antifungal activity of shallot’s water extortion againsts Candida albicans invitro. This was a laboratory experimental research which used completely randomized design, with diffusion method.Shallot’s water extortion was devided into three concentrations, there were 50%, 100% and 200%. Ketoconazole 2%was positive control and aquadest was negative control. The result of this research based on analysis of varians(Anova), there was significant difference between several treatments and was confirmed with Duncan New MultipleRange Test (DNMRT) p<0,05, there was significant difference between 100% shallot’s water extortion with othertreatments, but there was no significant difference between 50% shallot’s water extortion with 200% shallot’s. Theconclusion was shallot’s water extortion had antifungal activity againsts Candida albicans with the best concentration100%, but it was lower than ketoconazole 2%.

Download Full-text

Porositas Lempeng Resin Akrilik Pasca Perendaman Rebusan Daun Sirih dan Kayu Siwak

Jurnal Vokasi Kesehatan ◽

10.30602/jvk.v4i1.122 ◽

2018 ◽

Vol 4 (1) ◽

pp. 39

Author(s):

Yustin Nur Khoiriyah

Keyword(s):

Acrylic Resin ◽

Negative Control ◽

Control Group ◽

Control Group Design ◽

Betel Leaf ◽

Significant Difference ◽

Antimicrobial Function ◽

Post Test ◽

Boiled Water ◽

One Way Anova

Abstract: Porosity Of Acrylic Resin After Immersion In The Boiled Water Of Betel Leaves And Siwak Wood. Denture acrylic resin can be a collection point for stain, tar, and plaque and this will adversely affect the oral health of the denture wearer. One way to clean the oral cavity of denture users is to use mouthwash and soak the teeth with a cleaning solution/denture cleanser. Mouthwash solutions and chemical-based cleaning solutions at relatively high prices, and affect the porosity of dentures. Therefore, the need for alternative materials that are safe, cheap, natural as well as having antimicrobial function without affecting the level of porosity of denture. This study was to determine the effect of the combination of boiled water of betel leaves and siwak wood to the porosity of the acrylic resin plate. This study was an experimental study, posttest only design with the control group has been done at the integrated laboratory of Poltekkes Tanjungkarang, July – December 2015. Data were analyzed by One Way ANOVA and continued with Least Significant Difference test. The results showed that the combination of betel leaves and siwak wood does not affect the porosity of the acrylic resin plate. The highest concentration of the combination of betel leaf water and siwak wood that did not differ significantly with negative control (aquades) was 75% with longest immersion period was 59 days. Abstrak: Porositas Lempeng Resin Akrilik Pasca Perendaman Rebusan Daun Sirih Dan Kayu Siwak. Gigi tiruan resin akrilik dapat menjadi tempat pengumpulan stain, tar, dan plak dan hal ini akan berpengaruh jelek terhadap kesehatan mulut pemakai gigi tiruan. Salah satu cara menjaga kebersihan rongga mulut pengguna gigi tiruan adalah dengan menggunakan obat kumur dan merendam gigi-tiruan tersebut dengan larutan pembersih/denture cleanser. Larutan obat kumur dan larutan pembersih berbahan dasar dari bahan kimia dengan harga yang relatif mahal, serta mempengaruhi porositas gigi tiruan. Oleh karena itu, perlu adanya bahan alternatif yang aman, murah, alami sekaligus memiliki fungsi antimikroba dengan tanpa mempengaruhi tingkat porositas gigi tiruan. Tujuan penelitian ini adalah untuk mengetahui pengaruh kombinasi air rebusan daun sirih dan kayu siwak terhadap porositas lempeng resin akrilik. Penelitian ini adalah penelitian eksperimental, rancangan post test only with control group design, dilaksanakan di Laboratorium Terpadu Poltekkes Tanjungkarang, Juli-Desember 2015. Analisis data dengan uji One Way ANOVA dan dilanjutkan uji Least Significant Difference. Hasil penelitian menunjukkan bahwa kombinasi air rebusan daun sirih dan kayu siwak tidak mempengaruhi porositas lempeng resin akrilik. Konsentrasi tertinggi dari kombinasi air rebusan daun sirih dan kayu siwak yang tidak berbeda signifikan dengan kontrol negatif (aquades) adalah 75% dengan lama perendaman terpanjang yaitu 59 hari.

Download Full-text

Konsentrasiekstrakdaunsirsak(Annonamuricata)yangmenghambatpertumbuhan Candida albicans pada lempeng resin akrilik polimerisasi panas Concentration of soursop (Annona muricata)leaf extract in inhibiting Candida albicans on heat cure acrylic resin plate

Journal of Dentomaxillofacial Science ◽

10.15562/jdmfs.v12i3.371 ◽

2013 ◽

Vol 12 (3) ◽

pp. 159

Author(s):

Bahruddin Thalib ◽

Herawati Hasan

Keyword(s):

Candida Albicans ◽

Test Data ◽

Leaf Extract ◽

Agar Medium ◽

Acrylic Resin ◽

Annona Muricata ◽

Heat Curing ◽

Heat Cure ◽

Seeds And Fruits

Soursops (Annona muricata)are plants that have flower and sweet fruit. These plants have been used since long fortraditional medicine, especially the leaves, seeds, and fruits. This study aimed to determine the effect of concentrationof soursop leaf extract to the growth of Candida albicans on heat curing acrylic resin plate. The study begins with themanufacture of soursop leaf extract concentrations of 5%, 15%, 25%, 35%, and 45%, dilution of the extract, thepurification of C.albicans, growing C.albicans on saboraud dextrose agar medium, and minimum inhibitoryconcentration test. Data were analyzed by ANOVA followed by LSD test using SPSS 16.0. The results showed asignificant difference in the average number of C.albicans that grows between each concentration soursop leaf extract(α<0.05) and soursop leaf extract at a concentration of 45% is the most effective in inhibiting the growth of C.albicans.It was concluded that the higher the concentration of soursop leaf extract, the more effective in inhibiting the growth ofC.albicans.

Download Full-text

TESTING OF THE FRACTURE RESISTANCE OF THE HEAT-CURING DENTURE BASE ACRYLIC RESIN

Contemporary Materials ◽

10.7251/comen1802130m ◽

2018 ◽

Vol 9 (2) ◽

Author(s):

Aleksandra Maletin ◽

Jovana Bastajić ◽

Ivan Ristić ◽

Branislava Petronijević Šarčev ◽

Isidora Nešković ◽

...

Keyword(s):

Mechanical Properties ◽

Flexural Strength ◽

Fracture Resistance ◽

Acrylic Resin ◽

Denture Base ◽

Universal Testing ◽

Heat Curing ◽

Significant Difference ◽

Student’S T ◽

Student’S T Test

For many years, poly-methyl methacrylate has been used as a material of choice for making the denture base, thanks to its good and desirable performances, such as: simplicity in work, possibility of reparation, aesthetics and affordable price. Considering to its insufficient hardness and fracture resistance, there is a tendency to improve the mechanical properties of the material, by changing its basic composition. The aim of the research was to determine the fracture resistance of the heat-curing denture base acrylic resin materials. Materials and methods: For the research ,20 samples of the 2 heat-curing acrylics had been prepared, standard ones and reinforced acrylic resin material. After the storage in the saline for 15 days, measurements of the fracture resistance were performed by using the universal testing device. The data were statistically processed using the Student’s t-test for independent samples. Results: By measuring the flexural strength and deflection at breakage, it has been proven that there was, statistically, a significant difference of the flexural strength between reinforced (179.91-248.72MPa) and standard heat-curing acrylics (183.25- 200.74MPa). The deflection at breakage showed approximately the same values for both materials (1,0-1,4mm; 1.0-1.5mm). Conclusion: By enhancing the polymer, the mechanical properties of the denture base acrylic resin materials will be improved, primarily, higher fracture resistance, that means that these technologies need to be improved.

Download Full-text

EFEKTIVITAS SUPLEMENTASI TERIPANG EMAS (Stichopus hermanii) DALAM MENCEGAH TERJADINYA ORAL CANDIDIASIS PADA TIKUS WISTAR

DENTA ◽

10.30649/denta.v12i1.155 ◽

2018 ◽

Vol 12 (1) ◽

pp. 9

Author(s):

Endah Wahjuningsih ◽

Paramita Devi Oktaviani ◽

Dwi Andriani

Keyword(s):

Candida Albicans ◽

Oral Candidiasis ◽

Positive Control ◽

Negative Control ◽

Male Rats ◽

Significant Difference ◽

Post Test ◽

Mail Address ◽

E Mail ◽

Tongue Epithelium

ABSTRACT Background: Candida albicans is normal flora of oral cavity that can be pathogenic due to predisposition influence so that trigger Oral candidiasis. Stichopus hermanii suspected as an Oral candidiasis therapy because it contain antioxidant compound, antitumor and antifungi. Objective: Analyzing the effectiveness of Stichopus hermanii supplementation as a protective effect of oral candidiasis in Rats exposure to smoke. Materials and Methods: This experiment is post test only group control design using 35 male rats divided into 5 groups(X). X1 (negative control), X2 (positive control), X3 (Stichopus hermanii powder 0,0225mg/kgBB), X4 (Stichopus hermanii powder 0,045mg/kgBB), X5 (Stichopus hermanii powder 0,09mg/kgBB). Candida albicans induced into the mouth by an oral swab using cotton bud 3 times a week for 8 weeks. Smoke exposure as a predisposition factor be given 3 bars per day for 8 weeks. The rats being killed and tongue biopsies measure the thickness of tongue epithelium. The obtained data analyzation using One Way ANOVA and LSD test. Result: There is a significant difference (p<0.05) between X1 and X2, X1 and X3, X1 and X4, X1 and X5, X2 and X3, X2 and X4, X2 and X5, X3 and X5. Conclusion: Adduction of Stichopus hermanii capable of reducing risk of Oral candidiasis. Supplementation of Stichopus hermanii powder 0,09mg/kgBB is the most effective reduce thickness of the tongue epithelium in the group that exposure to smoke and induced of Candida albicans.Keywords: Stichopus hermanii, Oral candidiasis, Tongue, Candida albicans, Thickness of Epithelium Correspondence: Endah Wahjuningsih, Laboratorium Biologi Oral Fakultas Kedokteran Gigi Universitas Hang Tuah, Jl, Arif Rahman Hakim 150, Surabaya, Indonesia. Ph 031-5945864, fax: 031-5912191, e-mail address: [email protected]

Download Full-text

Pengaruh perendaman plat resin akrilik dalam ekstrak kayu manis (Cinnamomum burmanii) terhadap jumlah blastospora Candida Albicans

e-GIGI ◽

10.35790/eg.1.2.2013.3106 ◽

2013 ◽

Vol 1 (2) ◽

Author(s):

Christian Dama

Keyword(s):

Candida Albicans ◽

Acrylic Resin ◽

T Test ◽

Control Group ◽

Dilution Method ◽

Denture Stomatitis ◽

Cinnamon Extract ◽

Acrylic Plate ◽

Removable Denture ◽

Significant Difference

Resin akrilik sering digunakan sebagai bahan dari gigi tiruan, khususnya basis gigi tiruan. Adanya rongga-rongga mikro pada akrilik menjadi tempat perlekatan sisa-sisa makanan yang dapat meningkatkan jumlah mikroorganisme dalam rongga mulut, salah satunya ialah jamur Candida albicans. Pertumbuhan yang pesat dari jamur Candida albicans menjadi penyebab utama infeksi pada mukosa rongga mulut pemakai gigi tiruan lepasan akrilik, disebut denture stomatitis. Ekstrak kayu manis yang mengandung minyak atsiri, sinamaldehid, eugenol dan juga senyawa seperti flavonoid, Saponin, serta tanin memiliki efek antifungi. Tujuan penelitian ini untuk mengetahui pengaruh dari ekstrak kayu manis dan konsentrasi ekstrak kayu manis terhadap jumlah blastospora Candida albicans pada plat akrilik sehingga mampu mencegah dan menanggulangi penyakit denture stomatitis. Plat akrilik yang telah terkontaminasi dengan jamur Candida albicans direndam dalam ekstrak kayu manis dengan konsentrasi 20%, 30%, 40%, 50%, dan aquades sebagai kontrol. selanjutnya, plat akrilik di getarkan untuk menjatuhkan Candida albicans dalam tabung reaksi dan dihitung jumlah blastosporanya dengan metode pengenceran menggunakan cairan NaCl dan metode hitung langsung pada mikroskop. Hasil perhitungan statistik dengan uji Independent t-test diketahui terdapat perbedaan yang bermakna antara kelompok ekstrak kayu manis dan kelompok kontrol (p ≤ 0,05). Dari hasil penelitian dapat disimpulkan bahwa ekstrak kayu manis dapat memengaruhi pertumbuhan jumlah blastospora Candida albicans pada plat resin akrilik dan meningkat seiring dengan meningkatnya konsentrasi ekstrak kayu manis (cinnamomum burmanii) yang digunakan.Kata kunci: Resin akrilik, Candida albicans, ekstrak kayu manis.ABSTRACTAcrylic resin is often used as an ingredient of artificial teeth, denture base in particular. The existence of micro cavities in acrylic attachment to place leftover food that can increase the number of microorganisms in the oral cavity, one of which is Candida albicans. The rapid growth of Candida albicans is a main cause of infection in the oral mucosa acrylic removable denture wearers, called denture stomatitis. Cinnamon extract that contains essential oils, sinamaldehid, eugenol and also compounds such as flavonoids, saponins, and tannins have antifungal effects. The purpose of this study to determine the effect of cinnamon extract and cinnamon extract concentrations against Candida albicans blastospora number on acrylic plate so as to prevent and control disease denture stomatitis. Acrylic plate that has been contaminated with Candida albicans soaked in cinnamon extract with a concentration of 20%, 30%, 40%, 50%, and sterile water as a control. furthermore, acrylic plate vibrate to drop Candida albicans in a test tube and counted the number of blastospora by using saline dilution method and direct count method on the microscope. The results of calculations with the statistical test known Independent t-test significant difference between cinnamon extract group and the control group (p ≤ 0,05). From the results of this study concluded that cinnamon extract may affect the growth of Candida albicans blastospora on acrylic resin plate and increases with increasing concentration of the extract of cinnamon (Cinnamomum burmanii) were used.Keywords : Acrylic resin, Candida albicans, cinnamon extract.

Download Full-text

Effect of different EGTA concentrations on dentin microhardness

Brazilian Dental Journal ◽

10.1590/s0103-64402002000300009 ◽

2002 ◽

Vol 13 (3) ◽

pp. 188-190 ◽

Cited By ~ 15

Author(s):

Antonio Miranda da Cruz-Filho ◽

Eduardo Augusto de Paula ◽

Jesus Djalma Pécora ◽

Manoel Damião de Sousa-Neto

Keyword(s):

Acetic Acid ◽

Statistical Analysis ◽

High Speed ◽

Acrylic Resin ◽

Distilled Water ◽

Three Solutions ◽

Human Teeth ◽

Tukey Test ◽

Significant Difference ◽

Root Dentin

The effect of 1%, 3% and 5% EGTA (ethylene glycol-bis-(b-amino-ethyl ether) N,N,N´,N´-tetra-acetic acid) on the microhardness of root dentin of the cervical third of human teeth was studied. Five newly extracted maxillary incisors were sectioned transversely at the cementoenamel junction, and the crowns were discarded. The roots were embedded in blocks of high-speed polymerized acrylic resin and cut transversely into 1-mm sections. The second section of the cervical third of the root of each tooth was sectioned and divided into four parts. Each part was placed on an acrylic disc that was used as a base for microhardness measurement. Fifty microliters of 1% EGTA, 3% EGTA, or 5% EGTA were applied to the dentin surface. Deionized and distilled water was used as control. Dentin microhardness was then measured with a load of 50 g for 15 s. Statistical analysis showed that the three concentrations of the chelating solution EGTA significantly reduced dentin microhardness when compared with water (ANOVA, p<0.01), and that there was a statistically significant difference among the three solutions (Tukey test, p<0.05).

Download Full-text

Effect of Denture Base Fabrication Technique on Candida albicans Adhesion In Vitro

Materials ◽

10.3390/ma14010221 ◽

2021 ◽

Vol 14 (1) ◽

pp. 221

Author(s):

Avi Meirowitz ◽

Arkadi Rahmanov ◽

Eti Shlomo ◽

Helena Zelikman ◽

Eran Dolev ◽

...

Keyword(s):

Surface Roughness ◽

Candida Albicans ◽

3D Printing ◽

Oral Candidiasis ◽

Acrylic Resin ◽

Denture Base ◽

Denture Stomatitis ◽

Heat Curing ◽

Vitro Effect

Denture stomatitis is a common manifestation of oral candidiasis affecting some 65% of denture wearers. This condition is initiated by the adherence of Candida albicans to denture base acrylic resin. The present study aimed to test the in vitro effect of traditional and novel fabrication methods on Candida albicans adhesion to denture base samples. Denture based acrylic discs were fabricated using: (i) computerized milling, (ii) 3D printing, (iii) heat curing, and (iv) cold curing. Discs were tested for surface roughness (Ra), hydrophobicity (contact angle), mucin adsorption (Bradford assay), and Candida albicans adhesion. 3D printing significantly increased microbial cell adhesion as compared with heat curing, and computerized milling significantly decreased it. These results were associated with mucin adsorption levels rather than surface roughness. Results suggest that 3D printing may increase the risk for developing denture stomatitis, whereas computerized milling may decrease it as compared with traditional heat curing denture base fabrication.

Download Full-text

Efektivitas perasan daun seledri (Apium graveolens Linn.) sebagai pembersih gigi tiruan terhadap pertumbuhan Candida albicans pada basis gigi tiruan nilon termoplastikThe effectiveness of celery leaf juice (Apium graveolens Linn.) as a denture cleaner against the growth of Candida albicans on thermoplastic nylon denture base

Jurnal Kedokteran Gigi Universitas Padjadjaran ◽

10.24198/jkg.v32i3.28877 ◽

2020 ◽

Vol 32 (3) ◽

pp. 184

Author(s):

Dhilan Purna Aji ◽

Achmad Gunadi ◽

Tantin Ermawati

Keyword(s):

Candida Albicans ◽

Positive Control ◽

Negative Control ◽

Apium Graveolens ◽

Control Group ◽

Control Group Design ◽

Denture Base ◽

Significant Difference ◽

Post Test ◽

Leaf Juice

Pendahuluan: Basis gigi tiruan nilon termoplastik merupakan alternatif pengganti basis gigi tiruan resin akrilik. Pembersihan gigi tiruan diperlukan untuk menjaga basis gigi tiruan agar tetap bersih dari kontaminasi mikroorganisme. Daun seledri merupakan bahan alam yang memiliki kandungan flavonoid, saponin, tanin, dan minyak atsiri yang sudah terbukti bersifat antijamur. Penelitian sebelumnya hanya melihat zona hambat saja. Tujuan penelitian adalah menganalisis efektivitas perasan daun seledri sebagai pembersih gigi tiruan terhadap pertumbuhan Candida albicans pada basis gigi tiruan nilon termoplastik. Metode: Eksperimental laboratoris dengan rancangan penelitian post-test only control group design. Sampel nilon termoplastik berbentuk cakram dengan diameter 10 mm dan tebal 2 mm sebanyak 25 dibagi menjadi 5 kelompok. Sampel dikontaminasi dengan C. albicans setelah direndam dalam kontrol negatif (akuades) selama 6 jam, kontrol positif (tablet effervescent) selama 15 menit, dan perasan daun seledri konsentrasi 25, 50, dan 100% selama 6 jam. Sampel selanjutnya diletakkan dalam media sabouraud dextrose broth (SDB). Pengujian efektivitas perasan daun seledri dilakukan dengan menentukan nilai absorbansi kekeruhan media SDB menggunakan spektrofotometer. Data dianalisis menggunakan one-way ANOVA dan Least Significant Difference (LSD). Hasil: Nilai konsentrasi C. albicans pada kelompok kontrol negatif mendapatkan hasil 0,380 x 108 CFU/mL, kontrol positif mendapatkan hasil 0,310 x 108 CFU/mL, perasan daun seledri konsentrasi 25% mendapatkan hasil 0,243 x 108 CFU/mL, konsentrasi 50% mendapatkan hasil 0,160 x 108 CFU/mL, dan konsentrasi 100% mendapatkan hasil 0,236 x 108 CFU/mL. Simpulan: Perasan daun seledri efektif sebagai pembersih gigi tiruan untuk menghambat pertumbuhan C. albicans, dengan konsentrasi yang efektif sebesar 50%.Kata kunci: Nilon termoplastik, perasan daun seledri, Candida albicans. ABSTRACTIntroduction: Thermoplastic nylon denture base is an alternative to the acrylic resin denture base. Denture cleaning is needed to keep the denture base clean from contamination by microorganisms. Celery leaves are natural ingredients that contain flavonoids, saponins, tannins, and essential oils that have been proven to have antifungal properties. Previous research only observed the inhibitory zone. This research was aimed to analyse the effectiveness of celery leaf juice as a denture cleaner against the growth of Candida albicans on thermoplastic nylon denture base. Methods: Experimental laboratory with a post-test only control group design was conducted towards 25 disc-shaped thermoplastic nylon samples with a diameter of 10 mm and a thickness of 2 mm, and divided into five groups. Samples were contaminated with C. albicans after immersion in the negative control (aquadest) for 6 hours, positive control (effervescent tablets) for 15 minutes, and celery leaf juice with the concentrations of 25, 50, and 100% for 6 hours. The sample was then placed in the Sabouraud-dextrose broth (SDB) medium. The effectiveness of celery leaf juice was tested by determining the absorbance value of SDB media turbidity using a spectrophotometer. Data were analysed using one-way ANOVA and Least Significant Difference (LSD). Results: The concentration value of C. albicans in the negative control group was 0.380 x 108 CFU / mL, the positive control was 0.310 x 108 CFU / mL, the juice of celery leaves with the concentration of 25% was 0.243 x 108 CFU / mL, the concentration of 50% was 0.160 x 108 CFU / mL, and the concentration of 100% was 0.236 x 108 CFU / mL. Conclusion: Celery leaf juice is effective as a denture cleaner to inhibit the growth of C. albicans, with an effective concentration of 50%.Keywords: Thermoplastic nylon, celery leaf juice, Candida albicans.

Download Full-text

Apical microleakage of epoxy resin and methacrylate resin-based sealer with continuous wave obturation technique

Journal of Dentomaxillofacial Science ◽

10.22208/jdmfs.1.1.2016.16-21 ◽

2016 ◽

Vol 1 (1) ◽

pp. 16

Author(s):

Haslinda Haslinda ◽

Christine Anastasia Rovani ◽

Aries Chandra Trilaksana

Keyword(s):

Epoxy Resin ◽

Root Canal ◽

Continuous Wave ◽

Negative Control ◽

Distilled Water ◽

Root Canal Sealer ◽

Root Canal Preparation ◽

Significant Difference ◽

Ah Plus ◽

Nail Varnish

The aim of this research was to determine the microleakage apical sealer based on epoxy resin and methacrylate resin with continuous wave obturation technique.Thirty permanent lateral incisors were selected at random and divided into 3 groups (N=10), namely AH Plus obturator group (epoxy resin), EndoREZ group (methacrylate resin), and negative control. The samples were decoronated, root canal preparation, then kept in incubator of 37°C for 72 hours. Sample were coated with nail varnish then immersed in methylene blue for 48 hours. The samples were washed with distilled water, dried and nail varnish removed. The samples were clearing. Penetration was measured using microscope and given score 0-4. Measurements were analyzed statistically. By using Kruskal Wallis test and Mann Whitney test, there is no significant difference between the apical microleakage of the the epoxy resin root canal sealer with methacrylate root canal sealer based (p>0,05). It means that the apical microleakage of the epoxy resin root canal sealer based comparable with merhacrylate root canal sealer based. It was concluded that the apical microleakage of epoxy resin based sealer does not different to the methacrylate resin based sealer.

Download Full-text